Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 704 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
new file mode 100644
index 000000000..4d6e7492d
--- /dev/null
+++ b/sound/soc/codecs/rt1011.h
@@ -0,0 +1,704 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * rt1011.h -- RT1011 ALSA SoC amplifier component driver header
+ *
+ * Copyright(c) 2019 Realtek Semiconductor Corp.
+ */
+
+#ifndef _RT1011_H_
+#define _RT1011_H_
+
+#define RT1011_DEVICE_ID_NUM 0x1011
+
+#define RT1011_RESET				0x0000
+#define RT1011_CLK_1				0x0002
+#define RT1011_CLK_2				0x0004
+#define RT1011_CLK_3				0x0006
+#define RT1011_CLK_4				0x0008
+#define RT1011_PLL_1				0x000a
+#define RT1011_PLL_2				0x000c
+#define RT1011_SRC_1				0x000e
+#define RT1011_SRC_2				0x0010
+#define RT1011_SRC_3				0x0012
+#define RT1011_CLK_DET				0x0020
+#define RT1011_SIL_DET				0x0022
+#define RT1011_PRIV_INDEX			0x006a
+#define RT1011_PRIV_DATA			0x006c
+#define RT1011_CUSTOMER_ID			0x0076
+#define RT1011_FM_VER				0x0078
+#define RT1011_VERSION_ID			0x007a
+#define RT1011_VENDOR_ID			0x007c
+#define RT1011_DEVICE_ID			0x007d
+#define RT1011_DUM_RW_0				0x00f0
+#define RT1011_DUM_YUN				0x00f2
+#define RT1011_DUM_RW_1				0x00f3
+#define RT1011_DUM_RO				0x00f4
+#define RT1011_MAN_I2C_DEV			0x0100
+#define RT1011_DAC_SET_1			0x0102
+#define RT1011_DAC_SET_2			0x0104
+#define RT1011_DAC_SET_3			0x0106
+#define RT1011_ADC_SET				0x0107
+#define RT1011_ADC_SET_1			0x0108
+#define RT1011_ADC_SET_2			0x010a
+#define RT1011_ADC_SET_3			0x010c
+#define RT1011_ADC_SET_4			0x010e
+#define RT1011_ADC_SET_5			0x0110
+#define RT1011_TDM_TOTAL_SET		0x0111
+#define RT1011_TDM1_SET_TCON		0x0112
+#define RT1011_TDM1_SET_1			0x0114
+#define RT1011_TDM1_SET_2			0x0116
+#define RT1011_TDM1_SET_3			0x0118
+#define RT1011_TDM1_SET_4			0x011a
+#define RT1011_TDM1_SET_5			0x011c
+#define RT1011_TDM2_SET_1			0x011e
+#define RT1011_TDM2_SET_2			0x0120
+#define RT1011_TDM2_SET_3			0x0122
+#define RT1011_TDM2_SET_4			0x0124
+#define RT1011_TDM2_SET_5			0x0126
+#define RT1011_PWM_CAL				0x0200
+#define RT1011_MIXER_1				0x0300
+#define RT1011_MIXER_2				0x0302
+#define RT1011_ADRC_LIMIT			0x0310
+#define RT1011_A_PRO				0x0311
+#define RT1011_A_TIMING_1			0x0313
+#define RT1011_A_TIMING_2			0x0314
+#define RT1011_A_TEMP_SEN			0x0316
+#define RT1011_SPK_VOL_DET_1		0x0319
+#define RT1011_SPK_VOL_DET_2		0x031a
+#define RT1011_SPK_VOL_TEST_OUT		0x031b
+#define RT1011_VBAT_VOL_DET_1		0x031c
+#define RT1011_VBAT_VOL_DET_2		0x031d
+#define RT1011_VBAT_TEST_OUT_1		0x031e
+#define RT1011_VBAT_TEST_OUT_2		0x031f
+#define RT1011_VBAT_PROTECTION			0x0320
+#define RT1011_VBAT_DET				0x0321
+#define RT1011_POWER_1				0x0322
+#define RT1011_POWER_2				0x0324
+#define RT1011_POWER_3				0x0326
+#define RT1011_POWER_4				0x0328
+#define RT1011_POWER_5				0x0329
+#define RT1011_POWER_6				0x032a
+#define RT1011_POWER_7				0x032b
+#define RT1011_POWER_8				0x032c
+#define RT1011_POWER_9				0x032d
+#define RT1011_CLASS_D_POS			0x032e
+#define RT1011_BOOST_CON_1			0x0330
+#define RT1011_BOOST_CON_2			0x0332
+#define RT1011_ANALOG_CTRL			0x0334
+#define RT1011_POWER_SEQ			0x0340
+#define RT1011_SHORT_CIRCUIT_DET_1	0x0508
+#define RT1011_SHORT_CIRCUIT_DET_2	0x050a
+#define RT1011_SPK_TEMP_PROTECT_0		0x050c
+#define RT1011_SPK_TEMP_PROTECT_1		0x050d
+#define RT1011_SPK_TEMP_PROTECT_2		0x050e
+#define RT1011_SPK_TEMP_PROTECT_3		0x050f
+#define RT1011_SPK_TEMP_PROTECT_4		0x0510
+#define RT1011_SPK_TEMP_PROTECT_5		0x0511
+#define RT1011_SPK_TEMP_PROTECT_6		0x0512
+#define RT1011_SPK_TEMP_PROTECT_7		0x0516
+#define RT1011_SPK_TEMP_PROTECT_8		0x0517
+#define RT1011_SPK_TEMP_PROTECT_9		0x0518
+#define RT1011_SPK_PRO_DC_DET_1		0x0519
+#define RT1011_SPK_PRO_DC_DET_2		0x051a
+#define RT1011_SPK_PRO_DC_DET_3		0x051b
+#define RT1011_SPK_PRO_DC_DET_4		0x051c
+#define RT1011_SPK_PRO_DC_DET_5		0x051d
+#define RT1011_SPK_PRO_DC_DET_6		0x051e
+#define RT1011_SPK_PRO_DC_DET_7		0x051f
+#define RT1011_SPK_PRO_DC_DET_8		0x0520
+#define RT1011_SPL_1				0x0521
+#define RT1011_SPL_2				0x0522
+#define RT1011_SPL_3				0x0524
+#define RT1011_SPL_4				0x0526
+#define RT1011_THER_FOLD_BACK_1		0x0528
+#define RT1011_THER_FOLD_BACK_2		0x052a
+#define RT1011_EXCUR_PROTECT_1			0x0530
+#define RT1011_EXCUR_PROTECT_2			0x0532
+#define RT1011_EXCUR_PROTECT_3			0x0534
+#define RT1011_EXCUR_PROTECT_4			0x0535
+#define RT1011_BAT_GAIN_1			0x0536
+#define RT1011_BAT_GAIN_2			0x0538
+#define RT1011_BAT_GAIN_3			0x053a
+#define RT1011_BAT_GAIN_4			0x053c
+#define RT1011_BAT_GAIN_5			0x053d
+#define RT1011_BAT_GAIN_6			0x053e
+#define RT1011_BAT_GAIN_7			0x053f
+#define RT1011_BAT_GAIN_8			0x0540
+#define RT1011_BAT_GAIN_9			0x0541
+#define RT1011_BAT_GAIN_10			0x0542
+#define RT1011_BAT_GAIN_11			0x0543
+#define RT1011_BAT_RT_THMAX_1		0x0544
+#define RT1011_BAT_RT_THMAX_2		0x0545
+#define RT1011_BAT_RT_THMAX_3		0x0546
+#define RT1011_BAT_RT_THMAX_4		0x0547
+#define RT1011_BAT_RT_THMAX_5		0x0548
+#define RT1011_BAT_RT_THMAX_6		0x0549
+#define RT1011_BAT_RT_THMAX_7		0x054a
+#define RT1011_BAT_RT_THMAX_8		0x054b
+#define RT1011_BAT_RT_THMAX_9		0x054c
+#define RT1011_BAT_RT_THMAX_10		0x054d
+#define RT1011_BAT_RT_THMAX_11		0x054e
+#define RT1011_BAT_RT_THMAX_12		0x054f
+#define RT1011_SPREAD_SPECTURM		0x0568
+#define RT1011_PRO_GAIN_MODE		0x056a
+#define RT1011_RT_DRC_CROSS			0x0600
+#define RT1011_RT_DRC_HB_1			0x0611
+#define RT1011_RT_DRC_HB_2			0x0612
+#define RT1011_RT_DRC_HB_3			0x0613
+#define RT1011_RT_DRC_HB_4			0x0614
+#define RT1011_RT_DRC_HB_5			0x0615
+#define RT1011_RT_DRC_HB_6			0x0616
+#define RT1011_RT_DRC_HB_7			0x0617
+#define RT1011_RT_DRC_HB_8			0x0618
+#define RT1011_RT_DRC_BB_1			0x0621
+#define RT1011_RT_DRC_BB_2			0x0622
+#define RT1011_RT_DRC_BB_3			0x0623
+#define RT1011_RT_DRC_BB_4			0x0624
+#define RT1011_RT_DRC_BB_5			0x0625
+#define RT1011_RT_DRC_BB_6			0x0626
+#define RT1011_RT_DRC_BB_7			0x0627
+#define RT1011_RT_DRC_BB_8			0x0628
+#define RT1011_RT_DRC_POS_1			0x0631
+#define RT1011_RT_DRC_POS_2			0x0632
+#define RT1011_RT_DRC_POS_3			0x0633
+#define RT1011_RT_DRC_POS_4			0x0634
+#define RT1011_RT_DRC_POS_5			0x0635
+#define RT1011_RT_DRC_POS_6			0x0636
+#define RT1011_RT_DRC_POS_7			0x0637
+#define RT1011_RT_DRC_POS_8			0x0638
+#define RT1011_CROSS_BQ_SET_1		0x0702
+#define RT1011_CROSS_BQ_SET_2		0x0704
+#define RT1011_BQ_SET_0				0x0706
+#define RT1011_BQ_SET_1				0x0708
+#define RT1011_BQ_SET_2				0x070a
+#define RT1011_BQ_PRE_GAIN_28_16	0x0710
+#define RT1011_BQ_PRE_GAIN_15_0		0x0711
+#define RT1011_BQ_POST_GAIN_28_16	0x0712
+#define RT1011_BQ_POST_GAIN_15_0	0x0713
+
+#define RT1011_BQ_H0_28_16					0x0720
+#define RT1011_BQ_A2_15_0						0x0729
+#define RT1011_BQ_1_H0_28_16					0x0730
+#define RT1011_BQ_1_A2_15_0					0x0739
+#define RT1011_BQ_2_H0_28_16					0x0740
+#define RT1011_BQ_2_A2_15_0					0x0749
+#define RT1011_BQ_3_H0_28_16					0x0750
+#define RT1011_BQ_3_A2_15_0					0x0759
+#define RT1011_BQ_4_H0_28_16					0x0760
+#define RT1011_BQ_4_A2_15_0					0x0769
+#define RT1011_BQ_5_H0_28_16					0x0770
+#define RT1011_BQ_5_A2_15_0					0x0779
+#define RT1011_BQ_6_H0_28_16					0x0780
+#define RT1011_BQ_6_A2_15_0					0x0789
+#define RT1011_BQ_7_H0_28_16					0x0790
+#define RT1011_BQ_7_A2_15_0					0x0799
+#define RT1011_BQ_8_H0_28_16					0x07a0
+#define RT1011_BQ_8_A2_15_0					0x07a9
+#define RT1011_BQ_9_H0_28_16					0x07b0
+#define RT1011_BQ_9_A2_15_0					0x07b9
+#define RT1011_BQ_10_H0_28_16				0x07c0
+#define RT1011_BQ_10_A2_15_0					0x07c9
+#define RT1011_TEST_PAD_STATUS				0x1000
+#define RT1011_SYSTEM_RESET_1				0x1007
+#define RT1011_SYSTEM_RESET_2				0x1008
+#define RT1011_SYSTEM_RESET_3				0x1009
+#define RT1011_ADCDAT_OUT_SOURCE			0x100D
+#define RT1011_PLL_INTERNAL_SET				0x1010
+#define RT1011_TEST_OUT_1						0x1020
+#define RT1011_TEST_OUT_3						0x1024
+#define RT1011_DC_CALIB_CLASSD_1			0x1200
+#define RT1011_DC_CALIB_CLASSD_2			0x1202
+#define RT1011_DC_CALIB_CLASSD_3			0x1204
+#define RT1011_DC_CALIB_CLASSD_5			0x1208
+#define RT1011_DC_CALIB_CLASSD_6			0x120a
+#define RT1011_DC_CALIB_CLASSD_7			0x120c
+#define RT1011_DC_CALIB_CLASSD_8			0x120e
+#define RT1011_DC_CALIB_CLASSD_10			0x1212
+#define RT1011_CLASSD_INTERNAL_SET_1		0x1300
+#define RT1011_CLASSD_INTERNAL_SET_3		0x1304
+#define RT1011_CLASSD_INTERNAL_SET_8		0x130c
+#define RT1011_VREF_LV_1						0x131a
+#define RT1011_SMART_BOOST_TIMING_1		0x1322
+#define RT1011_SMART_BOOST_TIMING_36		0x1349
+#define RT1011_SINE_GEN_REG_1				0x1500
+#define RT1011_SINE_GEN_REG_2				0x1502
+#define RT1011_SINE_GEN_REG_3				0x1504
+#define RT1011_STP_INITIAL_RS_TEMP			0x1510
+#define RT1011_STP_CALIB_RS_TEMP			0x152a
+#define RT1011_INIT_RECIPROCAL_REG_24_16				0x1538
+#define RT1011_INIT_RECIPROCAL_REG_15_0				0x1539
+#define RT1011_STP_INITIAL_RESISTANCE_TEMP				0x153c
+#define RT1011_STP_ALPHA_RECIPROCAL_MSB				0x153e
+#define RT1011_SPK_RESISTANCE_1				0x1544
+#define RT1011_SPK_RESISTANCE_2				0x1546
+#define RT1011_SPK_THERMAL					0x1548
+#define RT1011_STP_OTP_TH						0x1552
+#define RT1011_ALC_BK_GAIN_O					0x1554
+#define RT1011_ALC_BK_GAIN_O_PRE			0x1556
+#define RT1011_SPK_DC_O_23_16				0x155a
+#define RT1011_SPK_DC_O_15_0					0x155c
+#define RT1011_INIT_RECIPROCAL_SYN_24_16	0x1560
+#define RT1011_INIT_RECIPROCAL_SYN_15_0	0x1562
+#define RT1011_STP_BQ_1_A1_L_28_16			0x1570
+#define RT1011_STP_BQ_1_H0_R_15_0			0x1583
+#define RT1011_STP_BQ_2_A1_L_28_16			0x1590
+#define RT1011_SPK_EXCURSION_23_16			0x15be
+#define RT1011_SPK_EXCURSION_15_0			0x15bf
+#define RT1011_SEP_MAIN_OUT_23_16			0x15c0
+#define RT1011_SEP_MAIN_OUT_15_0			0x15c1
+#define RT1011_SEP_RE_REG_15_0				0x15f9
+#define RT1011_DRC_CF_PARAMS_1				0x1600
+#define RT1011_DRC_CF_PARAMS_12				0x160b
+#define RT1011_ALC_DRC_HB_INTERNAL_1		0x1611
+#define RT1011_ALC_DRC_HB_INTERNAL_5		0x1615
+#define RT1011_ALC_DRC_HB_INTERNAL_6		0x1616
+#define RT1011_ALC_DRC_HB_INTERNAL_7		0x1617
+#define RT1011_ALC_DRC_BB_INTERNAL_1		0x1621
+#define RT1011_ALC_DRC_BB_INTERNAL_5		0x1625
+#define RT1011_ALC_DRC_BB_INTERNAL_6		0x1626
+#define RT1011_ALC_DRC_BB_INTERNAL_7		0x1627
+#define RT1011_ALC_DRC_POS_INTERNAL_1		0x1631
+#define RT1011_ALC_DRC_POS_INTERNAL_5		0x1635
+#define RT1011_ALC_DRC_POS_INTERNAL_6		0x1636
+#define RT1011_ALC_DRC_POS_INTERNAL_7		0x1637
+#define RT1011_ALC_DRC_POS_INTERNAL_8		0x1638
+#define RT1011_ALC_DRC_POS_INTERNAL_9		0x163a
+#define RT1011_ALC_DRC_POS_INTERNAL_10	0x163c
+#define RT1011_ALC_DRC_POS_INTERNAL_11	0x163e
+#define RT1011_BQ_1_PARAMS_CHECK_5			0x1648
+#define RT1011_BQ_2_PARAMS_CHECK_1			0x1650
+#define RT1011_BQ_2_PARAMS_CHECK_5			0x1658
+#define RT1011_BQ_3_PARAMS_CHECK_1			0x1660
+#define RT1011_BQ_3_PARAMS_CHECK_5			0x1668
+#define RT1011_BQ_4_PARAMS_CHECK_1			0x1670
+#define RT1011_BQ_4_PARAMS_CHECK_5			0x1678
+#define RT1011_BQ_5_PARAMS_CHECK_1			0x1680
+#define RT1011_BQ_5_PARAMS_CHECK_5			0x1688
+#define RT1011_BQ_6_PARAMS_CHECK_1			0x1690
+#define RT1011_BQ_6_PARAMS_CHECK_5			0x1698
+#define RT1011_BQ_7_PARAMS_CHECK_1			0x1700
+#define RT1011_BQ_7_PARAMS_CHECK_5			0x1708
+#define RT1011_BQ_8_PARAMS_CHECK_1			0x1710
+#define RT1011_BQ_8_PARAMS_CHECK_5			0x1718
+#define RT1011_BQ_9_PARAMS_CHECK_1			0x1720
+#define RT1011_BQ_9_PARAMS_CHECK_5			0x1728
+#define RT1011_BQ_10_PARAMS_CHECK_1		0x1730
+#define RT1011_BQ_10_PARAMS_CHECK_5		0x1738
+#define RT1011_IRQ_1							0x173a
+#define RT1011_PART_NUMBER_EFUSE			0x173e
+#define RT1011_EFUSE_CONTROL_1				0x17bb
+#define RT1011_EFUSE_CONTROL_2				0x17bd
+#define RT1011_EFUSE_MATCH_DONE				0x17cb
+#define RT1011_EFUSE_ADC_OFFSET_18_16				0x17e5
+#define RT1011_EFUSE_ADC_OFFSET_15_0				0x17e7
+#define RT1011_EFUSE_DAC_OFFSET_G0_20_16				0x17e9
+#define RT1011_EFUSE_DAC_OFFSET_G0_15_0				0x17eb
+#define RT1011_EFUSE_DAC_OFFSET_G1_20_16				0x17ed
+#define RT1011_EFUSE_DAC_OFFSET_G1_15_0				0x17ef
+#define RT1011_EFUSE_READ_R0_3_15_0		0x1803
+#define RT1011_MAX_REG				0x1803
+#define RT1011_REG_DISP_LEN 23
+
+
+/* CLOCK-2 (0x0004) */
+#define RT1011_FS_SYS_PRE_MASK			(0x3 << 14)
+#define RT1011_FS_SYS_PRE_SFT			14
+#define RT1011_FS_SYS_PRE_MCLK			(0x0 << 14)
+#define RT1011_FS_SYS_PRE_BCLK			(0x1 << 14)
+#define RT1011_FS_SYS_PRE_PLL1			(0x2 << 14)
+#define RT1011_FS_SYS_PRE_RCCLK			(0x3 << 14)
+#define RT1011_PLL1_SRC_MASK			(0x1 << 13)
+#define RT1011_PLL1_SRC_SFT			13
+#define RT1011_PLL1_SRC_PLL2			(0x0 << 13)
+#define RT1011_PLL1_SRC_BCLK			(0x1 << 13)
+#define RT1011_PLL2_SRC_MASK			(0x1 << 12)
+#define RT1011_PLL2_SRC_SFT			12
+#define RT1011_PLL2_SRC_MCLK			(0x0 << 12)
+#define RT1011_PLL2_SRC_RCCLK			(0x1 << 12)
+#define RT1011_PLL2_SRC_DIV_MASK			(0x3 << 10)
+#define RT1011_PLL2_SRC_DIV_SFT			10
+#define RT1011_SRCIN_DIV_MASK			(0x3 << 8)
+#define RT1011_SRCIN_DIV_SFT			8
+#define RT1011_FS_SYS_DIV_MASK			(0x7 << 4)
+#define RT1011_FS_SYS_DIV_SFT			4
+
+/* PLL-1 (0x000a) */
+#define RT1011_PLL1_QM_MASK			(0xf << 12)
+#define RT1011_PLL1_QM_SFT			12
+#define RT1011_PLL1_BPM_MASK			(0x1 << 11)
+#define RT1011_PLL1_BPM_SFT			11
+#define RT1011_PLL1_BPM			(0x1 << 11)
+#define RT1011_PLL1_QN_MASK			(0x1ff << 0)
+#define RT1011_PLL1_QN_SFT			0
+
+/* PLL-2 (0x000c) */
+#define RT1011_PLL2_BPK_MASK			(0x1 << 5)
+#define RT1011_PLL2_BPK_SFT			5
+#define RT1011_PLL2_BPK			(0x1 << 5)
+#define RT1011_PLL2_QK_MASK			(0x1f << 0)
+#define RT1011_PLL2_QK_SFT			0
+
+/* Clock Detect (0x0020) */
+#define RT1011_EN_MCLK_DET_MASK			(0x1 << 15)
+#define RT1011_EN_MCLK_DET_SFT			15
+#define RT1011_EN_MCLK_DET			(0x1 << 15)
+
+/* DAC Setting-2 (0x0104) */
+#define RT1011_EN_CKGEN_DAC_MASK			(0x1 << 13)
+#define RT1011_EN_CKGEN_DAC_SFT			13
+#define RT1011_EN_CKGEN_DAC			(0x1 << 13)
+
+/* DAC Setting-3 (0x0106) */
+#define RT1011_DA_MUTE_EN_MASK			(0x1 << 15)
+#define RT1011_DA_MUTE_EN_SFT			15
+
+/* ADC Setting-5 (0x0110) */
+#define RT1011_AD_EN_CKGEN_ADC_MASK			(0x1 << 9)
+#define RT1011_AD_EN_CKGEN_ADC_SFT			9
+#define RT1011_AD_EN_CKGEN_ADC			(0x1 << 9)
+
+/* TDM Total Setting (0x0111) */
+#define RT1011_I2S_TDM_MS_MASK			(0x1 << 14)
+#define RT1011_I2S_TDM_MS_SFT			14
+#define RT1011_I2S_TDM_MS_S			(0x0 << 14)
+#define RT1011_I2S_TDM_MS_M			(0x1 << 14)
+#define RT1011_I2S_TX_DL_MASK			(0x7 << 8)
+#define RT1011_I2S_TX_DL_SFT			8
+#define RT1011_I2S_TX_DL_16B			(0x0 << 8)
+#define RT1011_I2S_TX_DL_20B			(0x1 << 8)
+#define RT1011_I2S_TX_DL_24B			(0x2 << 8)
+#define RT1011_I2S_TX_DL_32B			(0x3 << 8)
+#define RT1011_I2S_TX_DL_8B			(0x4 << 8)
+#define RT1011_I2S_RX_DL_MASK			(0x7 << 5)
+#define RT1011_I2S_RX_DL_SFT			5
+#define RT1011_I2S_RX_DL_16B			(0x0 << 5)
+#define RT1011_I2S_RX_DL_20B			(0x1 << 5)
+#define RT1011_I2S_RX_DL_24B			(0x2 << 5)
+#define RT1011_I2S_RX_DL_32B			(0x3 << 5)
+#define RT1011_I2S_RX_DL_8B			(0x4 << 5)
+#define RT1011_ADCDAT1_PIN_CONFIG			(0x1 << 4)
+#define RT1011_ADCDAT1_OUTPUT			(0x0 << 4)
+#define RT1011_ADCDAT1_INPUT			(0x1 << 4)
+#define RT1011_ADCDAT2_PIN_CONFIG			(0x1 << 3)
+#define RT1011_ADCDAT2_OUTPUT			(0x0 << 3)
+#define RT1011_ADCDAT2_INPUT			(0x1 << 3)
+#define RT1011_I2S_TDM_DF_MASK			(0x7 << 0)
+#define RT1011_I2S_TDM_DF_SFT			0
+#define RT1011_I2S_TDM_DF_I2S			(0x0)
+#define RT1011_I2S_TDM_DF_LEFT			(0x1)
+#define RT1011_I2S_TDM_DF_PCM_A			(0x2)
+#define RT1011_I2S_TDM_DF_PCM_B			(0x3)
+#define RT1011_I2S_TDM_DF_PCM_A_N			(0x6)
+#define RT1011_I2S_TDM_DF_PCM_B_N			(0x7)
+
+/* TDM_tcon Setting (0x0112) */
+#define RT1011_TCON_DF_MASK			(0x7 << 13)
+#define RT1011_TCON_DF_SFT			13
+#define RT1011_TCON_DF_I2S			(0x0 << 13)
+#define RT1011_TCON_DF_LEFT			(0x1 << 13)
+#define RT1011_TCON_DF_PCM_A			(0x2 << 13)
+#define RT1011_TCON_DF_PCM_B			(0x3 << 13)
+#define RT1011_TCON_DF_PCM_A_N			(0x6 << 13)
+#define RT1011_TCON_DF_PCM_B_N			(0x7 << 13)
+#define RT1011_TCON_BCLK_SEL_MASK			(0x3 << 10)
+#define RT1011_TCON_BCLK_SEL_SFT			10
+#define RT1011_TCON_BCLK_SEL_32FS			(0x0 << 10)
+#define RT1011_TCON_BCLK_SEL_64FS			(0x1 << 10)
+#define RT1011_TCON_BCLK_SEL_128FS			(0x2 << 10)
+#define RT1011_TCON_BCLK_SEL_256FS			(0x3 << 10)
+#define RT1011_TCON_CH_LEN_MASK			(0x3 << 5)
+#define RT1011_TCON_CH_LEN_SFT			5
+#define RT1011_TCON_CH_LEN_16B			(0x0 << 5)
+#define RT1011_TCON_CH_LEN_20B			(0x1 << 5)
+#define RT1011_TCON_CH_LEN_24B			(0x2 << 5)
+#define RT1011_TCON_CH_LEN_32B			(0x3 << 5)
+#define RT1011_TCON_BCLK_MST_MASK			(0x1 << 4)
+#define RT1011_TCON_BCLK_MST_SFT			4
+#define RT1011_TCON_BCLK_MST_INV		(0x1 << 4)
+
+/* TDM1 Setting-1 (0x0114) */
+#define RT1011_TDM_INV_BCLK_MASK			(0x1 << 15)
+#define RT1011_TDM_INV_BCLK_SFT			15
+#define RT1011_TDM_INV_BCLK		(0x1 << 15)
+#define RT1011_I2S_CH_TX_MASK			(0x3 << 10)
+#define RT1011_I2S_CH_TX_SFT			10
+#define RT1011_I2S_TX_2CH			(0x0 << 10)
+#define RT1011_I2S_TX_4CH			(0x1 << 10)
+#define RT1011_I2S_TX_6CH			(0x2 << 10)
+#define RT1011_I2S_TX_8CH			(0x3 << 10)
+#define RT1011_I2S_CH_RX_MASK			(0x3 << 8)
+#define RT1011_I2S_CH_RX_SFT			8
+#define RT1011_I2S_RX_2CH			(0x0 << 8)
+#define RT1011_I2S_RX_4CH			(0x1 << 8)
+#define RT1011_I2S_RX_6CH			(0x2 << 8)
+#define RT1011_I2S_RX_8CH			(0x3 << 8)
+#define RT1011_I2S_LR_CH_SEL_MASK			(0x1 << 7)
+#define RT1011_I2S_LR_CH_SEL_SFT			7
+#define RT1011_I2S_LEFT_CH_SEL			(0x0 << 7)
+#define RT1011_I2S_RIGHT_CH_SEL			(0x1 << 7)
+#define RT1011_I2S_CH_TX_LEN_MASK			(0x7 << 4)
+#define RT1011_I2S_CH_TX_LEN_SFT			4
+#define RT1011_I2S_CH_TX_LEN_16B			(0x0 << 4)
+#define RT1011_I2S_CH_TX_LEN_20B			(0x1 << 4)
+#define RT1011_I2S_CH_TX_LEN_24B			(0x2 << 4)
+#define RT1011_I2S_CH_TX_LEN_32B			(0x3 << 4)
+#define RT1011_I2S_CH_TX_LEN_8B			(0x4 << 4)
+#define RT1011_I2S_CH_RX_LEN_MASK			(0x7 << 0)
+#define RT1011_I2S_CH_RX_LEN_SFT			0
+#define RT1011_I2S_CH_RX_LEN_16B			(0x0 << 0)
+#define RT1011_I2S_CH_RX_LEN_20B			(0x1 << 0)
+#define RT1011_I2S_CH_RX_LEN_24B			(0x2 << 0)
+#define RT1011_I2S_CH_RX_LEN_32B			(0x3 << 0)
+#define RT1011_I2S_CH_RX_LEN_8B			(0x4 << 0)
+
+/* TDM1 Setting-2 (0x0116) */
+#define RT1011_TDM_I2S_DOCK_ADCDAT_LEN_1_MASK			(0x7 << 13)
+#define RT1011_TDM_I2S_DOCK_ADCDAT_2CH			(0x1 << 13)
+#define RT1011_TDM_I2S_DOCK_ADCDAT_4CH			(0x3 << 13)
+#define RT1011_TDM_I2S_DOCK_ADCDAT_6CH			(0x5 << 13)
+#define RT1011_TDM_I2S_DOCK_ADCDAT_8CH			(0x7 << 13)
+#define RT1011_TDM_I2S_DOCK_EN_1_MASK			(0x1 << 3)
+#define RT1011_TDM_I2S_DOCK_EN_1_SFT			3
+#define RT1011_TDM_I2S_DOCK_EN_1		(0x1 << 3)
+#define RT1011_TDM_ADCDAT1_DATA_LOCATION			(0x7 << 0)
+
+/* TDM1 Setting-3 (0x0118) */
+#define RT1011_TDM_I2S_RX_ADC1_1_MASK			(0x3 << 6)
+#define RT1011_TDM_I2S_RX_ADC2_1_MASK			(0x3 << 4)
+#define RT1011_TDM_I2S_RX_ADC3_1_MASK			(0x3 << 2)
+#define RT1011_TDM_I2S_RX_ADC4_1_MASK			(0x3 << 0)
+#define RT1011_TDM_I2S_RX_ADC1_1_LL			(0x2 << 6)
+#define RT1011_TDM_I2S_RX_ADC2_1_LL			(0x2 << 4)
+#define RT1011_TDM_I2S_RX_ADC3_1_LL			(0x2 << 2)
+#define RT1011_TDM_I2S_RX_ADC4_1_LL			(0x2 << 0)
+
+/* TDM1 Setting-4 (0x011a) */
+#define RT1011_TDM_I2S_TX_L_DAC1_1_MASK			(0x7 << 12)
+#define RT1011_TDM_I2S_TX_R_DAC1_1_MASK			(0x7 << 8)
+#define RT1011_TDM_I2S_TX_L_DAC1_1_SFT 12
+#define RT1011_TDM_I2S_TX_R_DAC1_1_SFT 8
+
+/* TDM2 Setting-2 (0x0120) */
+#define RT1011_TDM_I2S_DOCK_ADCDAT_LEN_2_MASK			(0x7 << 13)
+#define RT1011_TDM_I2S_DOCK_EN_2_MASK			(0x1 << 3)
+#define RT1011_TDM_I2S_DOCK_EN_2_SFT			3
+#define RT1011_TDM_I2S_DOCK_EN_2		(0x1 << 3)
+
+/* MIXER 1 (0x0300) */
+#define RT1011_MIXER_MUTE_MIX_I_MASK			(0x1 << 15)
+#define RT1011_MIXER_MUTE_MIX_I_SFT			15
+#define RT1011_MIXER_MUTE_MIX_I		(0x1 << 15)
+#define RT1011_MIXER_MUTE_SUM_I_MASK			(0x1 << 14)
+#define RT1011_MIXER_MUTE_SUM_I_SFT			14
+#define RT1011_MIXER_MUTE_SUM_I		(0x1 << 14)
+#define RT1011_MIXER_MUTE_MIX_V_MASK			(0x1 << 7)
+#define RT1011_MIXER_MUTE_MIX_V_SFT			7
+#define RT1011_MIXER_MUTE_MIX_V		(0x1 << 7)
+#define RT1011_MIXER_MUTE_SUM_V_MASK			(0x1 << 6)
+#define RT1011_MIXER_MUTE_SUM_V_SFT			6
+#define RT1011_MIXER_MUTE_SUM_V		(0x1 << 6)
+
+/* Analog Temperature Sensor (0x0316) */
+#define RT1011_POW_TEMP_REG				(0x1 << 2)
+#define RT1011_POW_TEMP_REG_BIT			2
+
+/* POWER-1 (0x0322) */
+#define RT1011_POW_LDO2				(0x1 << 15)
+#define RT1011_POW_LDO2_BIT			15
+#define RT1011_POW_DAC				(0x1 << 14)
+#define RT1011_POW_DAC_BIT			14
+#define RT1011_POW_CLK12M				(0x1 << 13)
+#define RT1011_POW_CLK12M_BIT		13
+#define RT1011_POW_TEMP				(0x1 << 12)
+#define RT1011_POW_TEMP_BIT			12
+#define RT1011_POW_ISENSE_SPK				(0x1 << 7)
+#define RT1011_POW_ISENSE_SPK_BIT			7
+#define RT1011_POW_LPF_SPK				(0x1 << 6)
+#define RT1011_POW_LPF_SPK_BIT			6
+#define RT1011_POW_VSENSE_SPK				(0x1 << 5)
+#define RT1011_POW_VSENSE_SPK_BIT			5
+#define RT1011_POW_TWO_BATTERY_SPK				(0x1 << 4)
+#define RT1011_POW_TWO_BATTERY_SPK_BIT			4
+
+/* POWER-2 (0x0324) */
+#define RT1011_PLLEN				(0x1 << 2)
+#define RT1011_PLLEN_BIT			2
+#define RT1011_POW_BG				(0x1 << 1)
+#define RT1011_POW_BG_BIT			1
+#define RT1011_POW_BG_MBIAS_LV				(0x1 << 0)
+#define RT1011_POW_BG_MBIAS_LV_BIT		0
+
+/* POWER-3 (0x0326) */
+#define RT1011_POW_DET_SPKVDD			(0x1 << 15)
+#define RT1011_POW_DET_SPKVDD_BIT		15
+#define RT1011_POW_DET_VBAT				(0x1 << 14)
+#define RT1011_POW_DET_VBAT_BIT			14
+#define RT1011_POW_FC						(0x1 << 13)
+#define RT1011_POW_FC_BIT					13
+#define RT1011_POW_MBIAS_LV				(0x1 << 12)
+#define RT1011_POW_MBIAS_LV_BIT			12
+#define RT1011_POW_ADC_I					(0x1 << 11)
+#define RT1011_POW_ADC_I_BIT				11
+#define RT1011_POW_ADC_V					(0x1 << 10)
+#define RT1011_POW_ADC_V_BIT				10
+#define RT1011_POW_ADC_T					(0x1 << 9)
+#define RT1011_POW_ADC_T_BIT				9
+#define RT1011_POWD_ADC_T					(0x1 << 8)
+#define RT1011_POWD_ADC_T_BIT			8
+#define RT1011_POW_MIX_I					(0x1 << 7)
+#define RT1011_POW_MIX_I_BIT				7
+#define RT1011_POW_MIX_V					(0x1 << 6)
+#define RT1011_POW_MIX_V_BIT				6
+#define RT1011_POW_SUM_I					(0x1 << 5)
+#define RT1011_POW_SUM_I_BIT				5
+#define RT1011_POW_SUM_V					(0x1 << 4)
+#define RT1011_POW_SUM_V_BIT				4
+#define RT1011_POW_MIX_T					(0x1 << 2)
+#define RT1011_POW_MIX_T_BIT				2
+#define RT1011_BYPASS_MIX_T				(0x1 << 1)
+#define RT1011_BYPASS_MIX_T_BIT			1
+#define RT1011_POW_VREF_LV				(0x1 << 0)
+#define RT1011_POW_VREF_LV_BIT			0
+
+/* POWER-4 (0x0328) */
+#define RT1011_POW_EN_SWR			(0x1 << 12)
+#define RT1011_POW_EN_SWR_BIT		12
+#define RT1011_POW_EN_PASS_BGOK_SWR			(0x1 << 10)
+#define RT1011_POW_EN_PASS_BGOK_SWR_BIT		10
+#define RT1011_POW_EN_PASS_VPOK_SWR			(0x1 << 9)
+#define RT1011_POW_EN_PASS_VPOK_SWR_BIT		9
+
+/* POWER-9 (0x032d) */
+#define RT1011_POW_SDB_REG_MASK			(0x1 << 9)
+#define RT1011_POW_SDB_REG_BIT		9
+#define RT1011_POW_SDB_REG		(0x1 << 9)
+#define RT1011_POW_SEL_SDB_MODE_MASK			(0x1 << 6)
+#define RT1011_POW_SEL_SDB_MODE_BIT		6
+#define RT1011_POW_SEL_SDB_MODE		(0x1 << 6)
+#define RT1011_POW_MNL_SDB_MASK			(0x1 << 5)
+#define RT1011_POW_MNL_SDB_BIT		5
+#define RT1011_POW_MNL_SDB		(0x1 << 5)
+
+/* SPK Protection-Temperature Protection (0x050c) */
+#define RT1011_STP_EN_MASK			(0x1 << 15)
+#define RT1011_STP_EN_BIT		15
+#define RT1011_STP_EN		(0x1 << 15)
+#define RT1011_STP_RS_CLB_EN_MASK			(0x1 << 14)
+#define RT1011_STP_RS_CLB_EN_BIT		14
+#define RT1011_STP_RS_CLB_EN		(0x1 << 14)
+
+/* SPK Protection-Temperature Protection-4 (0x0510) */
+#define RT1011_STP_R0_SELECT_MASK			(0x3 << 6)
+#define RT1011_STP_R0_SELECT_EFUSE			(0x0 << 6)
+#define RT1011_STP_R0_SELECT_START_VAL	(0x1 << 6)
+#define RT1011_STP_R0_SELECT_REG			(0x2 << 6)
+#define RT1011_STP_R0_SELECT_FORCE_ZERO	(0x3 << 6)
+
+/* SPK Protection-Temperature Protection-6 (0x0512) */
+#define RT1011_STP_R0_EN_MASK			(0x1 << 7)
+#define RT1011_STP_R0_EN_BIT		7
+#define RT1011_STP_R0_EN		(0x1 << 7)
+#define RT1011_STP_T0_EN_MASK			(0x1 << 6)
+#define RT1011_STP_T0_EN_BIT		6
+#define RT1011_STP_T0_EN		(0x1 << 6)
+
+/* Cross Biquad Setting-1 (0x0702) */
+#define RT1011_MONO_LR_SEL_MASK			(0x3 << 5)
+#define RT1011_MONO_L_CHANNEL			(0x0 << 5)
+#define RT1011_MONO_R_CHANNEL			(0x1 << 5)
+#define RT1011_MONO_LR_MIX_CHANNEL			(0x2 << 5)
+
+/* ClassD Internal Setting-1 (0x1300) */
+#define RT1011_DRIVER_READY_SPK			(0x1 << 12)
+#define RT1011_DRIVER_READY_SPK_BIT		12
+#define RT1011_RECV_MODE_SPK_MASK			(0x1 << 5)
+#define RT1011_SPK_MODE			(0x0 << 5)
+#define RT1011_RECV_MODE			(0x1 << 5)
+#define RT1011_RECV_MODE_SPK_BIT		5
+
+/* ClassD Internal Setting-3 (0x1304) */
+#define RT1011_REG_GAIN_CLASSD_RI_SPK_MASK			(0x7 << 12)
+#define RT1011_REG_GAIN_CLASSD_RI_410K (0x0 << 12)
+#define RT1011_REG_GAIN_CLASSD_RI_95K (0x1 << 12)
+#define RT1011_REG_GAIN_CLASSD_RI_82P5K (0x2 << 12)
+#define RT1011_REG_GAIN_CLASSD_RI_72P5K (0x3 << 12)
+#define RT1011_REG_GAIN_CLASSD_RI_62P5K (0x4 << 12)
+
+/* ClassD Internal Setting-8 (0x130c) */
+#define RT1011_TM_PORPVDD_SPK		(0x1 << 1)
+#define RT1011_TM_PORPVDD_SPK_BIT		1
+
+/* SPK Protection-Temperature Protection-SINE_GEN_REG-1 (0x1500) */
+#define RT1011_STP_SIN_GEN_EN_MASK (0x1 << 13)
+#define RT1011_STP_SIN_GEN_EN		(0x1 << 13)
+#define RT1011_STP_SIN_GEN_EN_BIT		13
+
+
+/* System Clock Source */
+enum {
+	RT1011_FS_SYS_PRE_S_MCLK,
+	RT1011_FS_SYS_PRE_S_BCLK,
+	RT1011_FS_SYS_PRE_S_PLL1,
+	RT1011_FS_SYS_PRE_S_RCCLK,	/* 12M Hz */
+};
+
+/* PLL Source 1/2 */
+enum {
+	RT1011_PLL1_S_BCLK,
+	RT1011_PLL2_S_MCLK,
+	RT1011_PLL2_S_RCCLK,	/* 12M Hz */
+};
+
+enum {
+	RT1011_AIF1,
+	RT1011_AIFS
+};
+
+enum {
+	RT1011_I2S_REF_NONE,
+	RT1011_I2S_REF_LEFT_CH,
+	RT1011_I2S_REF_RIGHT_CH,
+};
+
+/* BiQual & DRC related settings */
+#define RT1011_BQ_DRC_NUM 128
+struct rt1011_bq_drc_params {
+	unsigned short val;
+	unsigned short reg;
+#ifdef CONFIG_64BIT
+	unsigned int reserved;
+#endif
+};
+enum {
+	RT1011_ADVMODE_INITIAL_SET,
+	RT1011_ADVMODE_SEP_BQ_COEFF,
+	RT1011_ADVMODE_EQ_BQ_COEFF,
+	RT1011_ADVMODE_BQ_UI_COEFF,
+	RT1011_ADVMODE_SMARTBOOST_COEFF,
+	RT1011_ADVMODE_NUM,
+};
+
+struct rt1011_priv {
+	struct snd_soc_component *component;
+	struct regmap *regmap;
+	struct work_struct cali_work;
+	struct rt1011_bq_drc_params **bq_drc_params;
+
+	int sysclk;
+	int sysclk_src;
+	int lrck;
+	int bclk;
+	int id;
+
+	int pll_src;
+	int pll_in;
+	int pll_out;
+
+	int bq_drc_set;
+	unsigned int r0_reg, cali_done;
+	unsigned int r0_calib, temperature_calib;
+	int recv_spk_mode;
+	int i2s_ref;
+};
+
+#endif		/* end of _RT1011_H_ */