Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 449 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h
new file mode 100644
index 000000000..c9f636af7
--- /dev/null
+++ b/sound/soc/codecs/rt1015.h
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rt1015.h  --  RT1015 ALSA SoC audio amplifier driver
+//
+// Copyright 2019 Realtek Semiconductor Corp.
+// Author: Jack Yu <jack.yu@realtek.com>
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 2 as
+// published by the Free Software Foundation.
+//
+
+#ifndef __RT1015_H__
+#define __RT1015_H__
+#include <sound/rt1015.h>
+
+#define RT1015_DEVICE_ID_VAL			0x1011
+#define RT1015_DEVICE_ID_VAL2			0x1015
+
+#define RT1015_RESET				0x0000
+#define RT1015_CLK2				0x0004
+#define RT1015_CLK3				0x0006
+#define RT1015_PLL1				0x000a
+#define RT1015_PLL2				0x000c
+#define RT1015_DUM_RW1				0x000e
+#define RT1015_DUM_RW2				0x0010
+#define RT1015_DUM_RW3				0x0012
+#define RT1015_DUM_RW4				0x0014
+#define RT1015_DUM_RW5				0x0016
+#define RT1015_DUM_RW6				0x0018
+#define RT1015_CLK_DET				0x0020
+#define RT1015_SIL_DET				0x0022
+#define RT1015_CUSTOMER_ID			0x0076
+#define RT1015_PCODE_FWVER			0x0078
+#define RT1015_VER_ID				0x007a
+#define RT1015_VENDOR_ID			0x007c
+#define RT1015_DEVICE_ID			0x007d
+#define RT1015_PAD_DRV1				0x00f0
+#define RT1015_PAD_DRV2				0x00f2
+#define RT1015_GAT_BOOST			0x00f3
+#define RT1015_PRO_ALT				0x00f4
+#define RT1015_OSCK_STA				0x00f6
+#define RT1015_MAN_I2C				0x0100
+#define RT1015_DAC1				0x0102
+#define RT1015_DAC2				0x0104
+#define RT1015_DAC3				0x0106
+#define RT1015_ADC1				0x010c
+#define RT1015_ADC2				0x010e
+#define RT1015_TDM_MASTER			0x0111
+#define RT1015_TDM_TCON				0x0112
+#define RT1015_TDM1_1				0x0114
+#define RT1015_TDM1_2				0x0116
+#define RT1015_TDM1_3				0x0118
+#define RT1015_TDM1_4				0x011a
+#define RT1015_TDM1_5				0x011c
+#define RT1015_MIXER1				0x0300
+#define RT1015_MIXER2				0x0302
+#define RT1015_ANA_PROTECT1			0x0311
+#define RT1015_ANA_CTRL_SEQ1			0x0313
+#define RT1015_ANA_CTRL_SEQ2			0x0314
+#define RT1015_VBAT_DET_DEB			0x031a
+#define RT1015_VBAT_VOLT_DET1			0x031c
+#define RT1015_VBAT_VOLT_DET2			0x031d
+#define RT1015_VBAT_TEST_OUT1			0x031e
+#define RT1015_VBAT_TEST_OUT2			0x031f
+#define RT1015_VBAT_PROT_ATT			0x0320
+#define RT1015_VBAT_DET_CODE			0x0321
+#define RT1015_PWR1				0x0322
+#define RT1015_PWR4				0x0328
+#define RT1015_PWR5				0x0329
+#define RT1015_PWR6				0x032a
+#define RT1015_PWR7				0x032b
+#define RT1015_PWR8				0x032c
+#define RT1015_PWR9				0x032d
+#define RT1015_CLASSD_SEQ			0x032e
+#define RT1015_SMART_BST_CTRL1			0x0330
+#define RT1015_SMART_BST_CTRL2			0x0332
+#define RT1015_ANA_CTRL1			0x0334
+#define RT1015_ANA_CTRL2			0x0336
+#define RT1015_PWR_STATE_CTRL			0x0338
+#define RT1015_MONO_DYNA_CTRL			0x04fa
+#define RT1015_MONO_DYNA_CTRL1			0x04fc
+#define RT1015_MONO_DYNA_CTRL2			0x04fe
+#define RT1015_MONO_DYNA_CTRL3			0x0500
+#define RT1015_MONO_DYNA_CTRL4			0x0502
+#define RT1015_MONO_DYNA_CTRL5			0x0504
+#define RT1015_SPK_VOL					0x0506
+#define RT1015_SHORT_DETTOP1			0x0508
+#define RT1015_SHORT_DETTOP2			0x050a
+#define RT1015_SPK_DC_DETECT1			0x0519
+#define RT1015_SPK_DC_DETECT2			0x051a
+#define RT1015_SPK_DC_DETECT3			0x051b
+#define RT1015_SPK_DC_DETECT4			0x051d
+#define RT1015_SPK_DC_DETECT5			0x051f
+#define RT1015_BAT_RPO_STEP1			0x0536
+#define RT1015_BAT_RPO_STEP2			0x0538
+#define RT1015_BAT_RPO_STEP3			0x053a
+#define RT1015_BAT_RPO_STEP4			0x053c
+#define RT1015_BAT_RPO_STEP5			0x053d
+#define RT1015_BAT_RPO_STEP6			0x053e
+#define RT1015_BAT_RPO_STEP7			0x053f
+#define RT1015_BAT_RPO_STEP8			0x0540
+#define RT1015_BAT_RPO_STEP9			0x0541
+#define RT1015_BAT_RPO_STEP10			0x0542
+#define RT1015_BAT_RPO_STEP11			0x0543
+#define RT1015_BAT_RPO_STEP12			0x0544
+#define RT1015_SPREAD_SPEC1			0x0568
+#define RT1015_SPREAD_SPEC2			0x056a
+#define RT1015_PAD_STATUS			0x1000
+#define RT1015_PADS_PULLING_CTRL1		0x1002
+#define RT1015_PADS_DRIVING			0x1006
+#define RT1015_SYS_RST1				0x1007
+#define RT1015_SYS_RST2				0x1009
+#define RT1015_SYS_GATING1			0x100a
+#define RT1015_TEST_MODE1			0x100c
+#define RT1015_TEST_MODE2			0x100d
+#define RT1015_TIMING_CTRL1			0x100e
+#define RT1015_PLL_INT				0x1010
+#define RT1015_TEST_OUT1			0x1020
+#define RT1015_DC_CALIB_CLSD1			0x1200
+#define RT1015_DC_CALIB_CLSD2			0x1202
+#define RT1015_DC_CALIB_CLSD3			0x1204
+#define RT1015_DC_CALIB_CLSD4			0x1206
+#define RT1015_DC_CALIB_CLSD5			0x1208
+#define RT1015_DC_CALIB_CLSD6			0x120a
+#define RT1015_DC_CALIB_CLSD7			0x120c
+#define RT1015_DC_CALIB_CLSD8			0x120e
+#define RT1015_DC_CALIB_CLSD9			0x1210
+#define RT1015_DC_CALIB_CLSD10			0x1212
+#define RT1015_CLSD_INTERNAL1			0x1300
+#define RT1015_CLSD_INTERNAL2			0x1302
+#define RT1015_CLSD_INTERNAL3			0x1304
+#define RT1015_CLSD_INTERNAL4			0x1305
+#define RT1015_CLSD_INTERNAL5			0x1306
+#define RT1015_CLSD_INTERNAL6			0x1308
+#define RT1015_CLSD_INTERNAL7			0x130a
+#define RT1015_CLSD_INTERNAL8			0x130c
+#define RT1015_CLSD_INTERNAL9			0x130e
+#define RT1015_CLSD_OCP_CTRL			0x130f
+#define RT1015_VREF_LV				0x1310
+#define RT1015_MBIAS1				0x1312
+#define RT1015_MBIAS2				0x1314
+#define RT1015_MBIAS3				0x1316
+#define RT1015_MBIAS4				0x1318
+#define RT1015_VREF_LV1				0x131a
+#define RT1015_S_BST_TIMING_INTER1		0x1322
+#define RT1015_S_BST_TIMING_INTER2		0x1323
+#define RT1015_S_BST_TIMING_INTER3		0x1324
+#define RT1015_S_BST_TIMING_INTER4		0x1325
+#define RT1015_S_BST_TIMING_INTER5		0x1326
+#define RT1015_S_BST_TIMING_INTER6		0x1327
+#define RT1015_S_BST_TIMING_INTER7		0x1328
+#define RT1015_S_BST_TIMING_INTER8		0x1329
+#define RT1015_S_BST_TIMING_INTER9		0x132a
+#define RT1015_S_BST_TIMING_INTER10		0x132b
+#define RT1015_S_BST_TIMING_INTER11		0x1330
+#define RT1015_S_BST_TIMING_INTER12		0x1331
+#define RT1015_S_BST_TIMING_INTER13		0x1332
+#define RT1015_S_BST_TIMING_INTER14		0x1333
+#define RT1015_S_BST_TIMING_INTER15		0x1334
+#define RT1015_S_BST_TIMING_INTER16		0x1335
+#define RT1015_S_BST_TIMING_INTER17		0x1336
+#define RT1015_S_BST_TIMING_INTER18		0x1337
+#define RT1015_S_BST_TIMING_INTER19		0x1338
+#define RT1015_S_BST_TIMING_INTER20		0x1339
+#define RT1015_S_BST_TIMING_INTER21		0x133a
+#define RT1015_S_BST_TIMING_INTER22		0x133b
+#define RT1015_S_BST_TIMING_INTER23		0x133c
+#define RT1015_S_BST_TIMING_INTER24		0x133d
+#define RT1015_S_BST_TIMING_INTER25		0x133e
+#define RT1015_S_BST_TIMING_INTER26		0x133f
+#define RT1015_S_BST_TIMING_INTER27		0x1340
+#define RT1015_S_BST_TIMING_INTER28		0x1341
+#define RT1015_S_BST_TIMING_INTER29		0x1342
+#define RT1015_S_BST_TIMING_INTER30		0x1343
+#define RT1015_S_BST_TIMING_INTER31		0x1344
+#define RT1015_S_BST_TIMING_INTER32		0x1345
+#define RT1015_S_BST_TIMING_INTER33		0x1346
+#define RT1015_S_BST_TIMING_INTER34		0x1347
+#define RT1015_S_BST_TIMING_INTER35		0x1348
+#define RT1015_S_BST_TIMING_INTER36		0x1349
+
+/* 0x0004 */
+#define RT1015_CLK_SYS_PRE_SEL_MASK		(0x3 << 14)
+#define RT1015_CLK_SYS_PRE_SEL_SFT		14
+#define RT1015_CLK_SYS_PRE_SEL_MCLK		(0x0 << 14)
+#define RT1015_CLK_SYS_PRE_SEL_PLL		(0x2 << 14)
+#define RT1015_PLL_SEL_MASK			(0x1 << 13)
+#define RT1015_PLL_SEL_SFT			13
+#define RT1015_PLL_SEL_PLL_SRC2			(0x0 << 13)
+#define RT1015_PLL_SEL_BCLK			(0x1 << 13)
+#define RT1015_FS_PD_MASK			(0x7 << 4)
+#define RT1015_FS_PD_SFT			4
+
+/* 0x000a */
+#define RT1015_PLL_M_MAX			0xf
+#define RT1015_PLL_M_MASK			(RT1015_PLL_M_MAX << 12)
+#define RT1015_PLL_M_SFT			12
+#define RT1015_PLL_M_BP				(0x1 << 11)
+#define RT1015_PLL_M_BP_SFT			11
+#define RT1015_PLL_N_MAX			0x1ff
+#define RT1015_PLL_N_MASK			(RT1015_PLL_N_MAX << 0)
+#define RT1015_PLL_N_SFT			0
+
+/* 0x000c */
+#define RT1015_PLL_BPK_MASK			(0x1 << 5)
+#define RT1015_PLL_BPK				(0x0 << 5)
+#define RT1015_PLL_K_MAX			0x1f
+#define RT1015_PLL_K_MASK			(RT1015_PLL_K_MAX)
+#define RT1015_PLL_K_SFT			0
+
+/* 0x0020 */
+#define RT1015_EN_BCLK_DET_MASK			(0x1 << 15)
+#define RT1015_EN_BCLK_DET				(0x1 << 15)
+#define RT1015_DIS_BCLK_DET				(0x0 << 15)
+
+/* 0x007a */
+#define RT1015_ID_MASK				0xff
+#define RT1015_ID_VERA				0x0
+#define RT1015_ID_VERB				0x1
+
+/* 0x00f2 */
+#define RT1015_MONO_LR_SEL_MASK			(0x3 << 4)
+#define RT1015_MONO_L_CHANNEL			(0x0 << 4)
+#define RT1015_MONO_R_CHANNEL			(0x1 << 4)
+#define RT1015_MONO_LR_MIX_CHANNEL			(0x2 << 4)
+
+/* 0x0102 */
+#define RT1015_DAC_VOL_MASK			(0x7f << 9)
+#define RT1015_DAC_VOL_SFT			9
+
+/* 0x0104 */
+#define RT1015_DAC_CLK				(0x1 << 13)
+#define RT1015_DAC_CLK_BIT			13
+
+/* 0x0106 */
+#define RT1015_DAC_MUTE_MASK			(0x1 << 15)
+#define RT1015_DA_MUTE_SFT			15
+#define RT1015_DVOL_MUTE_FLAG_SFT		12
+
+/* 0x0111 */
+#define RT1015_TCON_TDM_MS_MASK			(0x1 << 14)
+#define RT1015_TCON_TDM_MS_SFT			14
+#define RT1015_TCON_TDM_MS_S			(0x0 << 14)
+#define RT1015_TCON_TDM_MS_M			(0x1 << 14)
+#define RT1015_I2S_DL_MASK			(0x7 << 8)
+#define RT1015_I2S_DL_SFT			8
+#define RT1015_I2S_DL_16			(0x0 << 8)
+#define RT1015_I2S_DL_20			(0x1 << 8)
+#define RT1015_I2S_DL_24			(0x2 << 8)
+#define RT1015_I2S_DL_8				(0x3 << 8)
+#define RT1015_I2S_M_DF_MASK			(0x7 << 0)
+#define RT1015_I2S_M_DF_SFT			0
+#define RT1015_I2S_M_DF_I2S			(0x0)
+#define RT1015_I2S_M_DF_LEFT			(0x1)
+#define RT1015_I2S_M_DF_PCM_A			(0x2)
+#define RT1015_I2S_M_DF_PCM_B			(0x3)
+#define RT1015_I2S_M_DF_PCM_A_N			(0x6)
+#define RT1015_I2S_M_DF_PCM_B_N			(0x7)
+
+/* TDM_tcon Setting (0x0112) */
+#define RT1015_I2S_TCON_DF_MASK			(0x7 << 13)
+#define RT1015_I2S_TCON_DF_SFT			13
+#define RT1015_I2S_TCON_DF_I2S			(0x0 << 13)
+#define RT1015_I2S_TCON_DF_LEFT			(0x1 << 13)
+#define RT1015_I2S_TCON_DF_PCM_A		(0x2 << 13)
+#define RT1015_I2S_TCON_DF_PCM_B		(0x3 << 13)
+#define RT1015_I2S_TCON_DF_PCM_A_N		(0x6 << 13)
+#define RT1015_I2S_TCON_DF_PCM_B_N		(0x7 << 13)
+#define RT1015_TCON_BCLK_SEL_MASK		(0x3 << 10)
+#define RT1015_TCON_BCLK_SEL_SFT		10
+#define RT1015_TCON_BCLK_SEL_32FS		(0x0 << 10)
+#define RT1015_TCON_BCLK_SEL_64FS		(0x1 << 10)
+#define RT1015_TCON_BCLK_SEL_128FS		(0x2 << 10)
+#define RT1015_TCON_BCLK_SEL_256FS		(0x3 << 10)
+#define RT1015_TCON_CH_LEN_MASK			(0x3 << 5)
+#define RT1015_TCON_CH_LEN_SFT			5
+#define RT1015_TCON_CH_LEN_16B			(0x0 << 5)
+#define RT1015_TCON_CH_LEN_20B			(0x1 << 5)
+#define RT1015_TCON_CH_LEN_24B			(0x2 << 5)
+#define RT1015_TCON_CH_LEN_32B			(0x3 << 5)
+#define RT1015_TCON_BCLK_MST_MASK			(0x1 << 4)
+#define RT1015_TCON_BCLK_MST_SFT			4
+#define RT1015_TCON_BCLK_MST_INV		(0x1 << 4)
+
+/* TDM1 Setting-1 (0x0114) */
+#define RT1015_TDM_INV_BCLK_MASK		(0x1 << 15)
+#define RT1015_TDM_INV_BCLK_SFT			15
+#define RT1015_TDM_INV_BCLK			(0x1 << 15)
+#define RT1015_I2S_CH_TX_MASK			(0x3 << 10)
+#define RT1015_I2S_CH_TX_SFT			10
+#define RT1015_I2S_TX_2CH			(0x0 << 10)
+#define RT1015_I2S_TX_4CH			(0x1 << 10)
+#define RT1015_I2S_TX_6CH			(0x2 << 10)
+#define RT1015_I2S_TX_8CH			(0x3 << 10)
+#define RT1015_I2S_CH_RX_MASK			(0x3 << 8)
+#define RT1015_I2S_CH_RX_SFT			8
+#define RT1015_I2S_RX_2CH			(0x0 << 8)
+#define RT1015_I2S_RX_4CH			(0x1 << 8)
+#define RT1015_I2S_RX_6CH			(0x2 << 8)
+#define RT1015_I2S_RX_8CH			(0x3 << 8)
+#define RT1015_I2S_LR_CH_SEL_MASK			(0x1 << 7)
+#define RT1015_I2S_LR_CH_SEL_SFT			7
+#define RT1015_I2S_LEFT_CH_SEL			(0x0 << 7)
+#define RT1015_I2S_RIGHT_CH_SEL			(0x1 << 7)
+#define RT1015_I2S_CH_TX_LEN_MASK			(0x7 << 4)
+#define RT1015_I2S_CH_TX_LEN_SFT			4
+#define RT1015_I2S_CH_TX_LEN_16B			(0x0 << 4)
+#define RT1015_I2S_CH_TX_LEN_20B			(0x1 << 4)
+#define RT1015_I2S_CH_TX_LEN_24B			(0x2 << 4)
+#define RT1015_I2S_CH_TX_LEN_32B			(0x3 << 4)
+#define RT1015_I2S_CH_TX_LEN_8B			(0x4 << 4)
+#define RT1015_I2S_CH_RX_LEN_MASK			(0x7 << 0)
+#define RT1015_I2S_CH_RX_LEN_SFT			0
+#define RT1015_I2S_CH_RX_LEN_16B			(0x0 << 0)
+#define RT1015_I2S_CH_RX_LEN_20B			(0x1 << 0)
+#define RT1015_I2S_CH_RX_LEN_24B			(0x2 << 0)
+#define RT1015_I2S_CH_RX_LEN_32B			(0x3 << 0)
+#define RT1015_I2S_CH_RX_LEN_8B			(0x4 << 0)
+
+/* TDM1 Setting-4 (0x011a) */
+#define RT1015_TDM_I2S_TX_L_DAC1_1_MASK			(0x7 << 12)
+#define RT1015_TDM_I2S_TX_R_DAC1_1_MASK			(0x7 << 8)
+#define RT1015_TDM_I2S_TX_L_DAC1_1_SFT 12
+#define RT1015_TDM_I2S_TX_R_DAC1_1_SFT 8
+
+/* 0x0330 */
+#define RT1015_ABST_AUTO_EN_MASK		(0x1 << 13)
+#define RT1015_ABST_AUTO_MODE			(0x1 << 13)
+#define RT1015_ABST_REG_MODE			(0x0 << 13)
+#define RT1015_ABST_FIX_TGT_MASK		(0x1 << 12)
+#define RT1015_ABST_FIX_TGT_EN			(0x1 << 12)
+#define RT1015_ABST_FIX_TGT_DIS			(0x0 << 12)
+#define RT1015_BYPASS_SWR_REG_MASK		(0x1 << 7)
+#define RT1015_BYPASS_SWRREG_BYPASS		(0x1 << 7)
+#define RT1015_BYPASS_SWRREG_PASS		(0x0 << 7)
+
+/* 0x0322 */
+#define RT1015_PWR_LDO2				(0x1 << 15)
+#define RT1015_PWR_LDO2_BIT			15
+#define RT1015_PWR_DAC				(0x1 << 14)
+#define RT1015_PWR_DAC_BIT			14
+#define RT1015_PWR_INTCLK			(0x1 << 13)
+#define RT1015_PWR_INTCLK_BIT			13
+#define RT1015_PWR_ISENSE			(0x1 << 12)
+#define RT1015_PWR_ISENSE_BIT			12
+#define RT1015_PWR_VSENSE			(0x1 << 10)
+#define RT1015_PWR_VSENSE_BIT			10
+#define RT1015_PWR_PLL				(0x1 << 9)
+#define RT1015_PWR_PLL_BIT			9
+#define RT1015_PWR_BG_1_2			(0x1 << 8)
+#define RT1015_PWR_BG_1_2_BIT			8
+#define RT1015_PWR_MBIAS_BG			(0x1 << 7)
+#define RT1015_PWR_MBIAS_BG_BIT			7
+#define RT1015_PWR_VBAT				(0x1 << 6)
+#define RT1015_PWR_VBAT_BIT			6
+#define RT1015_PWR_MBIAS			(0x1 << 4)
+#define RT1015_PWR_MBIAS_BIT			4
+#define RT1015_PWR_ADCV				(0x1 << 3)
+#define RT1015_PWR_ADCV_BIT			3
+#define RT1015_PWR_MIXERV			(0x1 << 2)
+#define RT1015_PWR_MIXERV_BIT			2
+#define RT1015_PWR_SUMV				(0x1 << 1)
+#define RT1015_PWR_SUMV_BIT			1
+#define RT1015_PWR_VREFLV			(0x1 << 0)
+#define RT1015_PWR_VREFLV_BIT			0
+
+/* 0x0324 */
+#define RT1015_PWR_BASIC			(0x1 << 15)
+#define RT1015_PWR_BASIC_BIT			15
+#define RT1015_PWR_SD				(0x1 << 14)
+#define RT1015_PWR_SD_BIT			14
+#define RT1015_PWR_IBIAS			(0x1 << 13)
+#define RT1015_PWR_IBIAS_BIT			13
+#define RT1015_PWR_VCM				(0x1 << 11)
+#define RT1015_PWR_VCM_BIT			11
+
+/* 0x0328 */
+#define RT1015_PWR_SWR				(0x1 << 12)
+#define RT1015_PWR_SWR_BIT			12
+
+/* 0x0519 */
+#define RT1015_EN_CLA_D_DC_DET_MASK	(0x1 << 12)
+#define RT1015_EN_CLA_D_DC_DET		(0x1 << 12)
+#define RT1015_DIS_CLA_D_DC_DET		(0x0 << 12)
+
+/* 0x1300 */
+#define RT1015_PWR_CLSD				(0x1 << 12)
+#define RT1015_PWR_CLSD_BIT			12
+
+/* 0x007a */
+#define RT1015_ID_MASK				0xff
+#define RT1015_ID_VERA				0x0
+#define RT1015_ID_VERB				0x1
+
+/* System Clock Source */
+enum {
+	RT1015_SCLK_S_MCLK,
+	RT1015_SCLK_S_PLL,
+};
+
+/* PLL1 Source */
+enum {
+	RT1015_PLL_S_MCLK,
+	RT1015_PLL_S_BCLK,
+};
+
+enum {
+	RT1015_AIF1,
+	RT1015_AIFS,
+};
+
+enum {
+	RT1015_VERA,
+	RT1015_VERB,
+};
+
+enum {
+	BYPASS,
+	ADAPTIVE,
+	FIXED_ADAPTIVE,
+};
+
+enum {
+	RT1015_Enable_Boost = 0,
+	RT1015_Bypass_Boost,
+};
+
+enum {
+	RT1015_HW_28 = 0,
+	RT1015_HW_29,
+};
+
+struct rt1015_priv {
+	struct snd_soc_component *component;
+	struct rt1015_platform_data pdata;
+	struct regmap *regmap;
+	int sysclk;
+	int sysclk_src;
+	int pll_src;
+	int pll_in;
+	int pll_out;
+	int boost_mode;
+	int bypass_boost;
+	int dac_is_used;
+	int cali_done;
+};
+
+#endif /* __RT1015_H__ */