Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt1016.h b/sound/soc/codecs/rt1016.h
new file mode 100644
index 000000000..041d6a5a6
--- /dev/null
+++ b/sound/soc/codecs/rt1016.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * rt1016.h  --  RT1016 ALSA SoC audio amplifier driver
+ *
+ * Copyright 2020 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RT1016_H__
+#define __RT1016_H__
+
+#define RT1016_DEVICE_ID_VAL	0x6595
+
+#define RT1016_RESET		0x00
+#define RT1016_PADS_CTRL_1	0x01
+#define RT1016_PADS_CTRL_2	0x02
+#define RT1016_I2C_CTRL		0x03
+#define RT1016_VOL_CTRL_1	0x04
+#define RT1016_VOL_CTRL_2	0x05
+#define RT1016_VOL_CTRL_3	0x06
+#define RT1016_ANA_CTRL_1	0x07
+#define RT1016_MUX_SEL		0x08
+#define RT1016_RX_I2S_CTRL	0x09
+#define RT1016_ANA_FLAG		0x0a
+#define RT1016_VERSION2_ID	0x0c
+#define RT1016_VERSION1_ID	0x0d
+#define RT1016_VENDER_ID	0x0e
+#define RT1016_DEVICE_ID	0x0f
+#define RT1016_ANA_CTRL_2	0x11
+#define RT1016_TEST_SIGNAL	0x1c
+#define RT1016_TEST_CTRL_1	0x1d
+#define RT1016_TEST_CTRL_2	0x1e
+#define RT1016_TEST_CTRL_3	0x1f
+#define RT1016_CLOCK_1		0x20
+#define RT1016_CLOCK_2		0x21
+#define RT1016_CLOCK_3		0x22
+#define RT1016_CLOCK_4		0x23
+#define RT1016_CLOCK_5		0x24
+#define RT1016_CLOCK_6		0x25
+#define RT1016_CLOCK_7		0x26
+#define RT1016_I2S_CTRL		0x40
+#define RT1016_DAC_CTRL_1	0x60
+#define RT1016_SC_CTRL_1	0x80
+#define RT1016_SC_CTRL_2	0x81
+#define RT1016_SC_CTRL_3	0x82
+#define RT1016_SC_CTRL_4	0x83
+#define RT1016_SIL_DET		0xa0
+#define RT1016_SYS_CLK		0xc0
+#define RT1016_BIAS_CUR		0xc1
+#define RT1016_DAC_CTRL_2	0xc2
+#define RT1016_LDO_CTRL		0xc3
+#define RT1016_CLASSD_1		0xc4
+#define RT1016_PLL1		0xc5
+#define RT1016_PLL2		0xc6
+#define RT1016_PLL3		0xc7
+#define RT1016_CLASSD_2		0xc8
+#define RT1016_CLASSD_OUT	0xc9
+#define RT1016_CLASSD_3		0xca
+#define RT1016_CLASSD_4		0xcb
+#define RT1016_CLASSD_5		0xcc
+#define RT1016_PWR_CTRL		0xcf
+
+/* global definition */
+#define RT1016_L_VOL_MASK			(0xff << 8)
+#define RT1016_L_VOL_SFT			8
+#define RT1016_R_VOL_MASK			(0xff)
+#define RT1016_R_VOL_SFT			0
+
+/* 0x04 */
+#define RT1016_DA_MUTE_L_SFT			7
+#define RT1016_DA_MUTE_R_SFT			6
+
+/* 0x20 */
+#define RT1016_CLK_SYS_SEL_MASK			(0x1 << 15)
+#define RT1016_CLK_SYS_SEL_SFT			15
+#define RT1016_CLK_SYS_SEL_MCLK			(0x0 << 15)
+#define RT1016_CLK_SYS_SEL_PLL			(0x1 << 15)
+#define RT1016_PLL_SEL_MASK			(0x1 << 13)
+#define RT1016_PLL_SEL_SFT			13
+#define RT1016_PLL_SEL_MCLK			(0x0 << 13)
+#define RT1016_PLL_SEL_BCLK			(0x1 << 13)
+
+/* 0x21 */
+#define RT1016_FS_PD_MASK			(0x7 << 13)
+#define RT1016_FS_PD_SFT			13
+#define RT1016_OSR_PD_MASK			(0x3 << 10)
+#define RT1016_OSR_PD_SFT			10
+
+/* 0x22 */
+#define RT1016_PWR_DAC_FILTER			(0x1 << 11)
+#define RT1016_PWR_DAC_FILTER_BIT		11
+#define RT1016_PWR_DACMOD			(0x1 << 10)
+#define RT1016_PWR_DACMOD_BIT			10
+#define RT1016_PWR_CLK_FIFO			(0x1 << 9)
+#define RT1016_PWR_CLK_FIFO_BIT			9
+#define RT1016_PWR_CLK_PUREDC			(0x1 << 8)
+#define RT1016_PWR_CLK_PUREDC_BIT		8
+#define RT1016_PWR_SIL_DET			(0x1 << 7)
+#define RT1016_PWR_SIL_DET_BIT			7
+#define RT1016_PWR_RC_25M			(0x1 << 6)
+#define RT1016_PWR_RC_25M_BIT			6
+#define RT1016_PWR_PLL1				(0x1 << 5)
+#define RT1016_PWR_PLL1_BIT			5
+#define RT1016_PWR_ANA_CTRL			(0x1 << 4)
+#define RT1016_PWR_ANA_CTRL_BIT			4
+#define RT1016_PWR_CLK_SYS			(0x1 << 3)
+#define RT1016_PWR_CLK_SYS_BIT			3
+
+/* 0x23 */
+#define RT1016_PWR_LRCK_DET			(0x1 << 15)
+#define RT1016_PWR_LRCK_DET_BIT			15
+#define RT1016_PWR_BCLK_DET			(0x1 << 11)
+#define RT1016_PWR_BCLK_DET_BIT			11
+
+/* 0x40 */
+#define RT1016_I2S_BCLK_MS_MASK			(0x1 << 15)
+#define RT1016_I2S_BCLK_MS_SFT			15
+#define RT1016_I2S_BCLK_MS_32			(0x0 << 15)
+#define RT1016_I2S_BCLK_MS_64			(0x1 << 15)
+#define RT1016_I2S_BCLK_POL_MASK		(0x1 << 13)
+#define RT1016_I2S_BCLK_POL_SFT			13
+#define RT1016_I2S_BCLK_POL_NOR			(0x0 << 13)
+#define RT1016_I2S_BCLK_POL_INV			(0x1 << 13)
+#define RT1016_I2S_DATA_SWAP_MASK		(0x1 << 10)
+#define RT1016_I2S_DATA_SWAP_SFT		10
+#define RT1016_I2S_DL_MASK			(0x7 << 4)
+#define RT1016_I2S_DL_SFT			4
+#define RT1016_I2S_DL_16			(0x1 << 4)
+#define RT1016_I2S_DL_20			(0x2 << 4)
+#define RT1016_I2S_DL_24			(0x3 << 4)
+#define RT1016_I2S_DL_32			(0x4 << 4)
+#define RT1016_I2S_MS_MASK			(0x1 << 3)
+#define RT1016_I2S_MS_SFT			3
+#define RT1016_I2S_MS_M				(0x0 << 3)
+#define RT1016_I2S_MS_S				(0x1 << 3)
+#define RT1016_I2S_DF_MASK			(0x7 << 0)
+#define RT1016_I2S_DF_SFT			0
+#define RT1016_I2S_DF_I2S			(0x0)
+#define RT1016_I2S_DF_LEFT			(0x1)
+#define RT1016_I2S_DF_PCM_A			(0x2)
+#define RT1016_I2S_DF_PCM_B			(0x3)
+
+/* 0xa0 */
+#define RT1016_SIL_DET_EN			(0x1 << 15)
+#define RT1016_SIL_DET_EN_BIT			15
+
+/* 0xc2 */
+#define RT1016_CKGEN_DAC			(0x1 << 13)
+#define RT1016_CKGEN_DAC_BIT			13
+
+/* 0xc4 */
+#define RT1016_VCM_SLOW				(0x1 << 6)
+#define RT1016_VCM_SLOW_BIT			6
+
+/* 0xc5 */
+#define RT1016_PLL_M_MAX			0xf
+#define RT1016_PLL_M_MASK			(RT1016_PLL_M_MAX << 12)
+#define RT1016_PLL_M_SFT			12
+#define RT1016_PLL_M_BP				(0x1 << 11)
+#define RT1016_PLL_M_BP_SFT			11
+#define RT1016_PLL_N_MAX			0x1ff
+#define RT1016_PLL_N_MASK			(RT1016_PLL_N_MAX << 0)
+#define RT1016_PLL_N_SFT			0
+
+/* 0xc6 */
+#define RT1016_PLL2_EN				(0x1 << 15)
+#define RT1016_PLL2_EN_BIT			15
+#define RT1016_PLL_K_BP				(0x1 << 5)
+#define RT1016_PLL_K_BP_SFT			5
+#define RT1016_PLL_K_MAX			0x1f
+#define RT1016_PLL_K_MASK			(RT1016_PLL_K_MAX)
+#define RT1016_PLL_K_SFT			0
+
+/* 0xcf */
+#define RT1016_PWR_BG_1_2			(0x1 << 12)
+#define RT1016_PWR_BG_1_2_BIT			12
+#define RT1016_PWR_MBIAS_BG			(0x1 << 11)
+#define RT1016_PWR_MBIAS_BG_BIT			11
+#define RT1016_PWR_PLL				(0x1 << 9)
+#define RT1016_PWR_PLL_BIT			9
+#define RT1016_PWR_BASIC			(0x1 << 8)
+#define RT1016_PWR_BASIC_BIT			8
+#define RT1016_PWR_CLSD				(0x1 << 7)
+#define RT1016_PWR_CLSD_BIT			7
+#define RT1016_PWR_25M				(0x1 << 6)
+#define RT1016_PWR_25M_BIT			6
+#define RT1016_PWR_DACL				(0x1 << 4)
+#define RT1016_PWR_DACL_BIT			4
+#define RT1016_PWR_DACR				(0x1 << 3)
+#define RT1016_PWR_DACR_BIT			3
+#define RT1016_PWR_LDO2				(0x1 << 2)
+#define RT1016_PWR_LDO2_BIT			2
+#define RT1016_PWR_VREF				(0x1 << 1)
+#define RT1016_PWR_VREF_BIT			1
+#define RT1016_PWR_MBIAS			(0x1 << 0)
+#define RT1016_PWR_MBIAS_BIT			0
+
+/* System Clock Source */
+enum {
+	RT1016_SCLK_S_MCLK,
+	RT1016_SCLK_S_PLL,
+};
+
+/* PLL1 Source */
+enum {
+	RT1016_PLL_S_MCLK,
+	RT1016_PLL_S_BCLK,
+};
+
+enum {
+	RT1016_AIF1,
+	RT1016_AIFS,
+};
+
+struct rt1016_priv {
+	struct snd_soc_component *component;
+	struct regmap *regmap;
+	int sysclk;
+	int sysclk_src;
+	int lrck;
+	int bclk;
+	int master;
+	int pll_src;
+	int pll_in;
+	int pll_out;
+};
+
+#endif /* __RT1016_H__ */