Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 702 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt5631.h b/sound/soc/codecs/rt5631.h
new file mode 100644
index 000000000..8a6b99a48
--- /dev/null
+++ b/sound/soc/codecs/rt5631.h
@@ -0,0 +1,702 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __RTCODEC5631_H__
+#define __RTCODEC5631_H__
+
+
+#define RT5631_RESET				0x00
+#define RT5631_SPK_OUT_VOL			0x02
+#define RT5631_HP_OUT_VOL			0x04
+#define RT5631_MONO_AXO_1_2_VOL		0x06
+#define RT5631_AUX_IN_VOL			0x0A
+#define RT5631_STEREO_DAC_VOL_1		0x0C
+#define RT5631_MIC_CTRL_1			0x0E
+#define RT5631_STEREO_DAC_VOL_2		0x10
+#define RT5631_ADC_CTRL_1			0x12
+#define RT5631_ADC_REC_MIXER			0x14
+#define RT5631_ADC_CTRL_2			0x16
+#define RT5631_VDAC_DIG_VOL			0x18
+#define RT5631_OUTMIXER_L_CTRL			0x1A
+#define RT5631_OUTMIXER_R_CTRL			0x1C
+#define RT5631_AXO1MIXER_CTRL			0x1E
+#define RT5631_AXO2MIXER_CTRL			0x20
+#define RT5631_MIC_CTRL_2			0x22
+#define RT5631_DIG_MIC_CTRL			0x24
+#define RT5631_MONO_INPUT_VOL			0x26
+#define RT5631_SPK_MIXER_CTRL			0x28
+#define RT5631_SPK_MONO_OUT_CTRL		0x2A
+#define RT5631_SPK_MONO_HP_OUT_CTRL		0x2C
+#define RT5631_SDP_CTRL				0x34
+#define RT5631_MONO_SDP_CTRL			0x36
+#define RT5631_STEREO_AD_DA_CLK_CTRL		0x38
+#define RT5631_PWR_MANAG_ADD1		0x3A
+#define RT5631_PWR_MANAG_ADD2		0x3B
+#define RT5631_PWR_MANAG_ADD3		0x3C
+#define RT5631_PWR_MANAG_ADD4		0x3E
+#define RT5631_GEN_PUR_CTRL_REG		0x40
+#define RT5631_GLOBAL_CLK_CTRL			0x42
+#define RT5631_PLL_CTRL				0x44
+#define RT5631_INT_ST_IRQ_CTRL_1		0x48
+#define RT5631_INT_ST_IRQ_CTRL_2		0x4A
+#define RT5631_GPIO_CTRL			0x4C
+#define RT5631_MISC_CTRL			0x52
+#define RT5631_DEPOP_FUN_CTRL_1		0x54
+#define RT5631_DEPOP_FUN_CTRL_2		0x56
+#define RT5631_JACK_DET_CTRL			0x5A
+#define RT5631_SOFT_VOL_CTRL			0x5C
+#define RT5631_ALC_CTRL_1			0x64
+#define RT5631_ALC_CTRL_2			0x65
+#define RT5631_ALC_CTRL_3			0x66
+#define RT5631_PSEUDO_SPATL_CTRL		0x68
+#define RT5631_INDEX_ADD			0x6A
+#define RT5631_INDEX_DATA			0x6C
+#define RT5631_EQ_CTRL				0x6E
+#define RT5631_VENDOR_ID			0x7A
+#define RT5631_VENDOR_ID1			0x7C
+#define RT5631_VENDOR_ID2			0x7E
+
+/* Index of Codec Private Register definition */
+#define RT5631_EQ_BW_LOP			0x00
+#define RT5631_EQ_GAIN_LOP			0x01
+#define RT5631_EQ_FC_BP1			0x02
+#define RT5631_EQ_BW_BP1			0x03
+#define RT5631_EQ_GAIN_BP1			0x04
+#define RT5631_EQ_FC_BP2			0x05
+#define RT5631_EQ_BW_BP2			0x06
+#define RT5631_EQ_GAIN_BP2			0x07
+#define RT5631_EQ_FC_BP3			0x08
+#define RT5631_EQ_BW_BP3			0x09
+#define RT5631_EQ_GAIN_BP3			0x0a
+#define RT5631_EQ_BW_HIP			0x0b
+#define RT5631_EQ_GAIN_HIP			0x0c
+#define RT5631_EQ_HPF_A1			0x0d
+#define RT5631_EQ_HPF_A2			0x0e
+#define RT5631_EQ_HPF_GAIN			0x0f
+#define RT5631_EQ_PRE_VOL_CTRL			0x11
+#define RT5631_EQ_POST_VOL_CTRL		0x12
+#define RT5631_TEST_MODE_CTRL			0x39
+#define RT5631_CP_INTL_REG2			0x45
+#define RT5631_ADDA_MIXER_INTL_REG3		0x52
+#define RT5631_SPK_INTL_CTRL			0x56
+
+
+/* global definition */
+#define RT5631_L_MUTE					(0x1 << 15)
+#define RT5631_L_MUTE_SHIFT				15
+#define RT5631_L_EN					(0x1 << 14)
+#define RT5631_L_EN_SHIFT				14
+#define RT5631_R_MUTE					(0x1 << 7)
+#define RT5631_R_MUTE_SHIFT				7
+#define RT5631_R_EN					(0x1 << 6)
+#define RT5631_R_EN_SHIFT				6
+#define RT5631_VOL_MASK				0x1f
+#define RT5631_L_VOL_SHIFT				8
+#define RT5631_R_VOL_SHIFT				0
+
+/* Speaker Output Control(0x02) */
+#define RT5631_SPK_L_VOL_SEL_MASK			(0x1 << 14)
+#define RT5631_SPK_L_VOL_SEL_VMID			(0x0 << 14)
+#define RT5631_SPK_L_VOL_SEL_SPKMIX_L			(0x1 << 14)
+#define RT5631_SPK_R_VOL_SEL_MASK			(0x1 << 6)
+#define RT5631_SPK_R_VOL_SEL_VMID			(0x0 << 6)
+#define RT5631_SPK_R_VOL_SEL_SPKMIX_R			(0x1 << 6)
+
+/* Headphone Output Control(0x04) */
+#define RT5631_HP_L_VOL_SEL_MASK			(0x1 << 14)
+#define RT5631_HP_L_VOL_SEL_VMID			(0x0 << 14)
+#define RT5631_HP_L_VOL_SEL_OUTMIX_L			(0x1 << 14)
+#define RT5631_HP_R_VOL_SEL_MASK			(0x1 << 6)
+#define RT5631_HP_R_VOL_SEL_VMID			(0x0 << 6)
+#define RT5631_HP_R_VOL_SEL_OUTMIX_R			(0x1 << 6)
+
+/* Output Control for AUXOUT/MONO(0x06) */
+#define RT5631_AUXOUT_1_VOL_SEL_MASK			(0x1 << 14)
+#define RT5631_AUXOUT_1_VOL_SEL_VMID			(0x0 << 14)
+#define RT5631_AUXOUT_1_VOL_SEL_OUTMIX_L		(0x1 << 14)
+#define RT5631_MUTE_MONO				(0x1 << 13)
+#define RT5631_MUTE_MONO_SHIFT			13
+#define RT5631_AUXOUT_2_VOL_SEL_MASK			(0x1 << 6)
+#define RT5631_AUXOUT_2_VOL_SEL_VMID			(0x0 << 6)
+#define RT5631_AUXOUT_2_VOL_SEL_OUTMIX_R		(0x1 << 6)
+
+/* Microphone Input Control 1(0x0E) */
+#define RT5631_MIC1_DIFF_INPUT_CTRL			(0x1 << 15)
+#define RT5631_MIC1_DIFF_INPUT_SHIFT			15
+#define RT5631_MIC2_DIFF_INPUT_CTRL			(0x1 << 7)
+#define RT5631_MIC2_DIFF_INPUT_SHIFT			7
+
+/* Stereo DAC Digital Volume2(0x10) */
+#define RT5631_DAC_VOL_MASK				0xff
+
+/* ADC Recording Mixer Control(0x14) */
+#define RT5631_M_OUTMIXER_L_TO_RECMIXER_L		(0x1 << 15)
+#define RT5631_M_OUTMIXL_RECMIXL_BIT			15
+#define RT5631_M_MIC1_TO_RECMIXER_L			(0x1 << 14)
+#define RT5631_M_MIC1_RECMIXL_BIT			14
+#define RT5631_M_AXIL_TO_RECMIXER_L			(0x1 << 13)
+#define RT5631_M_AXIL_RECMIXL_BIT			13
+#define RT5631_M_MONO_IN_TO_RECMIXER_L		(0x1 << 12)
+#define RT5631_M_MONO_IN_RECMIXL_BIT			12
+#define RT5631_M_OUTMIXER_R_TO_RECMIXER_R		(0x1 << 7)
+#define RT5631_M_OUTMIXR_RECMIXR_BIT			7
+#define RT5631_M_MIC2_TO_RECMIXER_R			(0x1 << 6)
+#define RT5631_M_MIC2_RECMIXR_BIT			6
+#define RT5631_M_AXIR_TO_RECMIXER_R			(0x1 << 5)
+#define RT5631_M_AXIR_RECMIXR_BIT			5
+#define RT5631_M_MONO_IN_TO_RECMIXER_R		(0x1 << 4)
+#define RT5631_M_MONO_IN_RECMIXR_BIT			4
+
+/* Left Output Mixer Control(0x1A) */
+#define RT5631_M_RECMIXER_L_TO_OUTMIXER_L		(0x1 << 15)
+#define RT5631_M_RECMIXL_OUTMIXL_BIT			15
+#define RT5631_M_RECMIXER_R_TO_OUTMIXER_L		(0x1 << 14)
+#define RT5631_M_RECMIXR_OUTMIXL_BIT			14
+#define RT5631_M_DAC_L_TO_OUTMIXER_L			(0x1 << 13)
+#define RT5631_M_DACL_OUTMIXL_BIT			13
+#define RT5631_M_MIC1_TO_OUTMIXER_L			(0x1 << 12)
+#define RT5631_M_MIC1_OUTMIXL_BIT			12
+#define RT5631_M_MIC2_TO_OUTMIXER_L			(0x1 << 11)
+#define RT5631_M_MIC2_OUTMIXL_BIT			11
+#define RT5631_M_MONO_IN_P_TO_OUTMIXER_L		(0x1 << 10)
+#define RT5631_M_MONO_INP_OUTMIXL_BIT		10
+#define RT5631_M_AXIL_TO_OUTMIXER_L			(0x1 << 9)
+#define RT5631_M_AXIL_OUTMIXL_BIT			9
+#define RT5631_M_AXIR_TO_OUTMIXER_L			(0x1 << 8)
+#define RT5631_M_AXIR_OUTMIXL_BIT			8
+#define RT5631_M_VDAC_TO_OUTMIXER_L			(0x1 << 7)
+#define RT5631_M_VDAC_OUTMIXL_BIT			7
+
+/* Right Output Mixer Control(0x1C) */
+#define RT5631_M_RECMIXER_L_TO_OUTMIXER_R		(0x1 << 15)
+#define RT5631_M_RECMIXL_OUTMIXR_BIT			15
+#define RT5631_M_RECMIXER_R_TO_OUTMIXER_R		(0x1 << 14)
+#define RT5631_M_RECMIXR_OUTMIXR_BIT			14
+#define RT5631_M_DAC_R_TO_OUTMIXER_R			(0x1 << 13)
+#define RT5631_M_DACR_OUTMIXR_BIT			13
+#define RT5631_M_MIC1_TO_OUTMIXER_R			(0x1 << 12)
+#define RT5631_M_MIC1_OUTMIXR_BIT			12
+#define RT5631_M_MIC2_TO_OUTMIXER_R			(0x1 << 11)
+#define RT5631_M_MIC2_OUTMIXR_BIT			11
+#define RT5631_M_MONO_IN_N_TO_OUTMIXER_R		(0x1 << 10)
+#define RT5631_M_MONO_INN_OUTMIXR_BIT		10
+#define RT5631_M_AXIL_TO_OUTMIXER_R			(0x1 << 9)
+#define RT5631_M_AXIL_OUTMIXR_BIT			9
+#define RT5631_M_AXIR_TO_OUTMIXER_R			(0x1 << 8)
+#define RT5631_M_AXIR_OUTMIXR_BIT			8
+#define RT5631_M_VDAC_TO_OUTMIXER_R			(0x1 << 7)
+#define RT5631_M_VDAC_OUTMIXR_BIT			7
+
+/* Lout Mixer Control(0x1E) */
+#define RT5631_M_MIC1_TO_AXO1MIXER			(0x1 << 15)
+#define RT5631_M_MIC1_AXO1MIX_BIT			15
+#define RT5631_M_MIC2_TO_AXO1MIXER			(0x1 << 11)
+#define RT5631_M_MIC2_AXO1MIX_BIT			11
+#define RT5631_M_OUTMIXER_L_TO_AXO1MIXER		(0x1 << 7)
+#define RT5631_M_OUTMIXL_AXO1MIX_BIT			7
+#define RT5631_M_OUTMIXER_R_TO_AXO1MIXER		(0x1 << 6)
+#define RT5631_M_OUTMIXR_AXO1MIX_BIT			6
+
+/* Rout Mixer Control(0x20) */
+#define RT5631_M_MIC1_TO_AXO2MIXER			(0x1 << 15)
+#define RT5631_M_MIC1_AXO2MIX_BIT			15
+#define RT5631_M_MIC2_TO_AXO2MIXER			(0x1 << 11)
+#define RT5631_M_MIC2_AXO2MIX_BIT			11
+#define RT5631_M_OUTMIXER_L_TO_AXO2MIXER		(0x1 << 7)
+#define RT5631_M_OUTMIXL_AXO2MIX_BIT			7
+#define RT5631_M_OUTMIXER_R_TO_AXO2MIXER		(0x1 << 6)
+#define RT5631_M_OUTMIXR_AXO2MIX_BIT			6
+
+/* Micphone Input Control 2(0x22) */
+#define RT5631_MIC_BIAS_90_PRECNET_AVDD 1
+#define RT5631_MIC_BIAS_75_PRECNET_AVDD 2
+
+#define RT5631_MIC1_BOOST_CTRL_MASK			(0xf << 12)
+#define RT5631_MIC1_BOOST_CTRL_BYPASS		(0x0 << 12)
+#define RT5631_MIC1_BOOST_CTRL_20DB			(0x1 << 12)
+#define RT5631_MIC1_BOOST_CTRL_24DB			(0x2 << 12)
+#define RT5631_MIC1_BOOST_CTRL_30DB			(0x3 << 12)
+#define RT5631_MIC1_BOOST_CTRL_35DB			(0x4 << 12)
+#define RT5631_MIC1_BOOST_CTRL_40DB			(0x5 << 12)
+#define RT5631_MIC1_BOOST_CTRL_34DB			(0x6 << 12)
+#define RT5631_MIC1_BOOST_CTRL_50DB			(0x7 << 12)
+#define RT5631_MIC1_BOOST_CTRL_52DB			(0x8 << 12)
+#define RT5631_MIC1_BOOST_SHIFT			12
+
+#define RT5631_MIC2_BOOST_CTRL_MASK			(0xf << 8)
+#define RT5631_MIC2_BOOST_CTRL_BYPASS		(0x0 << 8)
+#define RT5631_MIC2_BOOST_CTRL_20DB			(0x1 << 8)
+#define RT5631_MIC2_BOOST_CTRL_24DB			(0x2 << 8)
+#define RT5631_MIC2_BOOST_CTRL_30DB			(0x3 << 8)
+#define RT5631_MIC2_BOOST_CTRL_35DB			(0x4 << 8)
+#define RT5631_MIC2_BOOST_CTRL_40DB			(0x5 << 8)
+#define RT5631_MIC2_BOOST_CTRL_34DB			(0x6 << 8)
+#define RT5631_MIC2_BOOST_CTRL_50DB			(0x7 << 8)
+#define RT5631_MIC2_BOOST_CTRL_52DB			(0x8 << 8)
+#define RT5631_MIC2_BOOST_SHIFT			8
+
+#define RT5631_MICBIAS1_VOLT_CTRL_MASK		(0x1 << 7)
+#define RT5631_MICBIAS1_VOLT_CTRL_90P			(0x0 << 7)
+#define RT5631_MICBIAS1_VOLT_CTRL_75P			(0x1 << 7)
+
+#define RT5631_MICBIAS1_S_C_DET_MASK			(0x1 << 6)
+#define RT5631_MICBIAS1_S_C_DET_DIS			(0x0 << 6)
+#define RT5631_MICBIAS1_S_C_DET_ENA			(0x1 << 6)
+
+#define RT5631_MICBIAS1_SHORT_CURR_DET_MASK		(0x3 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_600UA	(0x0 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_1500UA	(0x1 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_2000UA	(0x2 << 4)
+
+#define RT5631_MICBIAS2_VOLT_CTRL_MASK		(0x1 << 3)
+#define RT5631_MICBIAS2_VOLT_CTRL_90P			(0x0 << 3)
+#define RT5631_MICBIAS2_VOLT_CTRL_75P			(0x1 << 3)
+
+#define RT5631_MICBIAS2_S_C_DET_MASK			(0x1 << 2)
+#define RT5631_MICBIAS2_S_C_DET_DIS			(0x0 << 2)
+#define RT5631_MICBIAS2_S_C_DET_ENA			(0x1 << 2)
+
+#define RT5631_MICBIAS2_SHORT_CURR_DET_MASK		(0x3)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_600UA	(0x0)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_1500UA	(0x1)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_2000UA	(0x2)
+
+
+/* Digital Microphone Control(0x24) */
+#define RT5631_DMIC_ENA_MASK				(0x1 << 15)
+#define RT5631_DMIC_ENA_SHIFT				15
+/* DMIC_ENA: DMIC to ADC Digital filter */
+#define RT5631_DMIC_ENA				(0x1 << 15)
+/* DMIC_DIS: ADC mixer to ADC Digital filter */
+#define RT5631_DMIC_DIS					(0x0 << 15)
+#define RT5631_DMIC_L_CH_MUTE				(0x1 << 13)
+#define RT5631_DMIC_L_CH_MUTE_SHIFT			13
+#define RT5631_DMIC_R_CH_MUTE				(0x1 << 12)
+#define RT5631_DMIC_R_CH_MUTE_SHIFT			12
+#define RT5631_DMIC_L_CH_LATCH_MASK			(0x1 << 9)
+#define RT5631_DMIC_L_CH_LATCH_RISING			(0x1 << 9)
+#define RT5631_DMIC_L_CH_LATCH_FALLING		(0x0 << 9)
+#define RT5631_DMIC_R_CH_LATCH_MASK			(0x1 << 8)
+#define RT5631_DMIC_R_CH_LATCH_RISING			(0x1 << 8)
+#define RT5631_DMIC_R_CH_LATCH_FALLING		(0x0 << 8)
+#define RT5631_DMIC_CLK_CTRL_MASK			(0x3 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_128FS			(0x0 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_64FS			(0x1 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_32FS			(0x2 << 4)
+
+/* Microphone Input Volume(0x26) */
+#define RT5631_MONO_DIFF_INPUT_SHIFT			15
+
+/* Speaker Mixer Control(0x28) */
+#define RT5631_M_RECMIXER_L_TO_SPKMIXER_L		(0x1 << 15)
+#define RT5631_M_RECMIXL_SPKMIXL_BIT			15
+#define RT5631_M_MIC1_P_TO_SPKMIXER_L		(0x1 << 14)
+#define RT5631_M_MIC1P_SPKMIXL_BIT			14
+#define RT5631_M_DAC_L_TO_SPKMIXER_L			(0x1 << 13)
+#define RT5631_M_DACL_SPKMIXL_BIT			13
+#define RT5631_M_OUTMIXER_L_TO_SPKMIXER_L		(0x1 << 12)
+#define RT5631_M_OUTMIXL_SPKMIXL_BIT			12
+
+#define RT5631_M_RECMIXER_R_TO_SPKMIXER_R		(0x1 << 7)
+#define RT5631_M_RECMIXR_SPKMIXR_BIT			7
+#define RT5631_M_MIC2_P_TO_SPKMIXER_R		(0x1 << 6)
+#define RT5631_M_MIC2P_SPKMIXR_BIT			6
+#define RT5631_M_DAC_R_TO_SPKMIXER_R			(0x1 << 5)
+#define RT5631_M_DACR_SPKMIXR_BIT			5
+#define RT5631_M_OUTMIXER_R_TO_SPKMIXER_R		(0x1 << 4)
+#define RT5631_M_OUTMIXR_SPKMIXR_BIT			4
+
+/* Speaker/Mono Output Control(0x2A) */
+#define RT5631_M_SPKVOL_L_TO_SPOL_MIXER		(0x1 << 15)
+#define RT5631_M_SPKVOLL_SPOLMIX_BIT			15
+#define RT5631_M_SPKVOL_R_TO_SPOL_MIXER		(0x1 << 14)
+#define RT5631_M_SPKVOLR_SPOLMIX_BIT			14
+#define RT5631_M_SPKVOL_L_TO_SPOR_MIXER		(0x1 << 13)
+#define RT5631_M_SPKVOLL_SPORMIX_BIT			13
+#define RT5631_M_SPKVOL_R_TO_SPOR_MIXER		(0x1 << 12)
+#define RT5631_M_SPKVOLR_SPORMIX_BIT			12
+#define RT5631_M_OUTVOL_L_TO_MONOMIXER		(0x1 << 11)
+#define RT5631_M_OUTVOLL_MONOMIX_BIT			11
+#define RT5631_M_OUTVOL_R_TO_MONOMIXER		(0x1 << 10)
+#define RT5631_M_OUTVOLR_MONOMIX_BIT			10
+
+/* Speaker/Mono/HP Output Control(0x2C) */
+#define RT5631_SPK_L_MUX_SEL_MASK			(0x3 << 14)
+#define RT5631_SPK_L_MUX_SEL_SPKMIXER_L		(0x0 << 14)
+#define RT5631_SPK_L_MUX_SEL_MONO_IN			(0x1 << 14)
+#define RT5631_SPK_L_MUX_SEL_DAC_L			(0x3 << 14)
+#define RT5631_SPK_L_MUX_SEL_SHIFT			14
+
+#define RT5631_SPK_R_MUX_SEL_MASK			(0x3 << 10)
+#define RT5631_SPK_R_MUX_SEL_SPKMIXER_R		(0x0 << 10)
+#define RT5631_SPK_R_MUX_SEL_MONO_IN			(0x1 << 10)
+#define RT5631_SPK_R_MUX_SEL_DAC_R			(0x3 << 10)
+#define RT5631_SPK_R_MUX_SEL_SHIFT			10
+
+#define RT5631_MONO_MUX_SEL_MASK			(0x3 << 6)
+#define RT5631_MONO_MUX_SEL_MONOMIXER		(0x0 << 6)
+#define RT5631_MONO_MUX_SEL_MONO_IN			(0x1 << 6)
+#define RT5631_MONO_MUX_SEL_SHIFT			6
+
+#define RT5631_HP_L_MUX_SEL_MASK			(0x1 << 3)
+#define RT5631_HP_L_MUX_SEL_HPVOL_L			(0x0 << 3)
+#define RT5631_HP_L_MUX_SEL_DAC_L			(0x1 << 3)
+#define RT5631_HP_L_MUX_SEL_SHIFT			3
+
+#define RT5631_HP_R_MUX_SEL_MASK			(0x1 << 2)
+#define RT5631_HP_R_MUX_SEL_HPVOL_R			(0x0 << 2)
+#define RT5631_HP_R_MUX_SEL_DAC_R			(0x1 << 2)
+#define RT5631_HP_R_MUX_SEL_SHIFT			2
+
+/* Stereo I2S Serial Data Port Control(0x34) */
+#define RT5631_SDP_MODE_SEL_MASK			(0x1 << 15)
+#define RT5631_SDP_MODE_SEL_MASTER			(0x0 << 15)
+#define RT5631_SDP_MODE_SEL_SLAVE			(0x1 << 15)
+
+#define RT5631_SDP_ADC_CPS_SEL_MASK			(0x3 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_OFF			(0x0 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_U_LAW			(0x1 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_A_LAW			(0x2 << 10)
+
+#define RT5631_SDP_DAC_CPS_SEL_MASK			(0x3 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_OFF			(0x0 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_U_LAW			(0x1 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_A_LAW			(0x2 << 8)
+/* 0:Normal 1:Invert */
+#define RT5631_SDP_I2S_BCLK_POL_CTRL			(0x1 << 7)
+/* 0:Normal 1:Invert */
+#define RT5631_SDP_DAC_R_INV				(0x1 << 6)
+/* 0:ADC data appear at left phase of LRCK
+ * 1:ADC data appear at right phase of LRCK
+ */
+#define RT5631_SDP_ADC_DATA_L_R_SWAP			(0x1 << 5)
+/* 0:DAC data appear at left phase of LRCK
+ * 1:DAC data appear at right phase of LRCK
+ */
+#define RT5631_SDP_DAC_DATA_L_R_SWAP			(0x1 << 4)
+
+/* Data Length Slection */
+#define RT5631_SDP_I2S_DL_MASK				(0x3 << 2)
+#define RT5631_SDP_I2S_DL_16				(0x0 << 2)
+#define RT5631_SDP_I2S_DL_20				(0x1 << 2)
+#define RT5631_SDP_I2S_DL_24				(0x2 << 2)
+#define RT5631_SDP_I2S_DL_8				(0x3 << 2)
+
+/* PCM Data Format Selection */
+#define RT5631_SDP_I2S_DF_MASK				(0x3)
+#define RT5631_SDP_I2S_DF_I2S				(0x0)
+#define RT5631_SDP_I2S_DF_LEFT				(0x1)
+#define RT5631_SDP_I2S_DF_PCM_A			(0x2)
+#define RT5631_SDP_I2S_DF_PCM_B			(0x3)
+
+/* Stereo AD/DA Clock Control(0x38h) */
+#define RT5631_I2S_PRE_DIV_MASK			(0x7 << 13)
+#define RT5631_I2S_PRE_DIV_1				(0x0 << 13)
+#define RT5631_I2S_PRE_DIV_2				(0x1 << 13)
+#define RT5631_I2S_PRE_DIV_4				(0x2 << 13)
+#define RT5631_I2S_PRE_DIV_8				(0x3 << 13)
+#define RT5631_I2S_PRE_DIV_16				(0x4 << 13)
+#define RT5631_I2S_PRE_DIV_32				(0x5 << 13)
+/* CLOCK RELATIVE OF BCLK AND LCRK */
+#define RT5631_I2S_LRCK_SEL_N_BCLK_MASK		(0x1 << 12)
+#define RT5631_I2S_LRCK_SEL_64_BCLK			(0x0 << 12) /* 64FS */
+#define RT5631_I2S_LRCK_SEL_32_BCLK			(0x1 << 12) /* 32FS */
+
+#define RT5631_DAC_OSR_SEL_MASK			(0x3 << 10)
+#define RT5631_DAC_OSR_SEL_128FS			(0x3 << 10)
+#define RT5631_DAC_OSR_SEL_64FS			(0x3 << 10)
+#define RT5631_DAC_OSR_SEL_32FS			(0x3 << 10)
+#define RT5631_DAC_OSR_SEL_16FS			(0x3 << 10)
+
+#define RT5631_ADC_OSR_SEL_MASK			(0x3 << 8)
+#define RT5631_ADC_OSR_SEL_128FS			(0x3 << 8)
+#define RT5631_ADC_OSR_SEL_64FS			(0x3 << 8)
+#define RT5631_ADC_OSR_SEL_32FS			(0x3 << 8)
+#define RT5631_ADC_OSR_SEL_16FS			(0x3 << 8)
+
+#define RT5631_ADDA_FILTER_CLK_SEL_256FS		(0 << 7) /* 256FS */
+#define RT5631_ADDA_FILTER_CLK_SEL_384FS		(1 << 7) /* 384FS */
+
+/* Power managment addition 1 (0x3A) */
+#define RT5631_PWR_MAIN_I2S_EN			(0x1 << 15)
+#define RT5631_PWR_MAIN_I2S_BIT			15
+#define RT5631_PWR_CLASS_D				(0x1 << 12)
+#define RT5631_PWR_CLASS_D_BIT			12
+#define RT5631_PWR_ADC_L_CLK				(0x1 << 11)
+#define RT5631_PWR_ADC_L_CLK_BIT			11
+#define RT5631_PWR_ADC_R_CLK				(0x1 << 10)
+#define RT5631_PWR_ADC_R_CLK_BIT			10
+#define RT5631_PWR_DAC_L_CLK				(0x1 << 9)
+#define RT5631_PWR_DAC_L_CLK_BIT			9
+#define RT5631_PWR_DAC_R_CLK				(0x1 << 8)
+#define RT5631_PWR_DAC_R_CLK_BIT			8
+#define RT5631_PWR_DAC_REF				(0x1 << 7)
+#define RT5631_PWR_DAC_REF_BIT			7
+#define RT5631_PWR_DAC_L_TO_MIXER			(0x1 << 6)
+#define RT5631_PWR_DAC_L_TO_MIXER_BIT		6
+#define RT5631_PWR_DAC_R_TO_MIXER			(0x1 << 5)
+#define RT5631_PWR_DAC_R_TO_MIXER_BIT		5
+
+/* Power managment addition 2 (0x3B) */
+#define RT5631_PWR_OUTMIXER_L				(0x1 << 15)
+#define RT5631_PWR_OUTMIXER_L_BIT			15
+#define RT5631_PWR_OUTMIXER_R				(0x1 << 14)
+#define RT5631_PWR_OUTMIXER_R_BIT			14
+#define RT5631_PWR_SPKMIXER_L				(0x1 << 13)
+#define RT5631_PWR_SPKMIXER_L_BIT			13
+#define RT5631_PWR_SPKMIXER_R				(0x1 << 12)
+#define RT5631_PWR_SPKMIXER_R_BIT			12
+#define RT5631_PWR_RECMIXER_L				(0x1 << 11)
+#define RT5631_PWR_RECMIXER_L_BIT			11
+#define RT5631_PWR_RECMIXER_R				(0x1 << 10)
+#define RT5631_PWR_RECMIXER_R_BIT			10
+#define RT5631_PWR_MIC1_BOOT_GAIN			(0x1 << 5)
+#define RT5631_PWR_MIC1_BOOT_GAIN_BIT		5
+#define RT5631_PWR_MIC2_BOOT_GAIN			(0x1 << 4)
+#define RT5631_PWR_MIC2_BOOT_GAIN_BIT		4
+#define RT5631_PWR_MICBIAS1_VOL			(0x1 << 3)
+#define RT5631_PWR_MICBIAS1_VOL_BIT			3
+#define RT5631_PWR_MICBIAS2_VOL			(0x1 << 2)
+#define RT5631_PWR_MICBIAS2_VOL_BIT			2
+#define RT5631_PWR_PLL1				(0x1 << 1)
+#define RT5631_PWR_PLL1_BIT				1
+#define RT5631_PWR_PLL2				(0x1 << 0)
+#define RT5631_PWR_PLL2_BIT				0
+
+/* Power managment addition 3(0x3C) */
+#define RT5631_PWR_VREF				(0x1 << 15)
+#define RT5631_PWR_VREF_BIT				15
+#define RT5631_PWR_FAST_VREF_CTRL			(0x1 << 14)
+#define RT5631_PWR_FAST_VREF_CTRL_BIT			14
+#define RT5631_PWR_MAIN_BIAS				(0x1 << 13)
+#define RT5631_PWR_MAIN_BIAS_BIT			13
+#define RT5631_PWR_AXO1MIXER				(0x1 << 11)
+#define RT5631_PWR_AXO1MIXER_BIT			11
+#define RT5631_PWR_AXO2MIXER				(0x1 << 10)
+#define RT5631_PWR_AXO2MIXER_BIT			10
+#define RT5631_PWR_MONOMIXER				(0x1 << 9)
+#define RT5631_PWR_MONOMIXER_BIT			9
+#define RT5631_PWR_MONO_DEPOP_DIS			(0x1 << 8)
+#define RT5631_PWR_MONO_DEPOP_DIS_BIT		8
+#define RT5631_PWR_MONO_AMP_EN			(0x1 << 7)
+#define RT5631_PWR_MONO_AMP_EN_BIT			7
+#define RT5631_PWR_CHARGE_PUMP			(0x1 << 4)
+#define RT5631_PWR_CHARGE_PUMP_BIT			4
+#define RT5631_PWR_HP_L_AMP				(0x1 << 3)
+#define RT5631_PWR_HP_L_AMP_BIT			3
+#define RT5631_PWR_HP_R_AMP				(0x1 << 2)
+#define RT5631_PWR_HP_R_AMP_BIT			2
+#define RT5631_PWR_HP_DEPOP_DIS			(0x1 << 1)
+#define RT5631_PWR_HP_DEPOP_DIS_BIT			1
+#define RT5631_PWR_HP_AMP_DRIVING			(0x1 << 0)
+#define RT5631_PWR_HP_AMP_DRIVING_BIT		0
+
+/* Power managment addition 4(0x3E) */
+#define RT5631_PWR_SPK_L_VOL				(0x1 << 15)
+#define RT5631_PWR_SPK_L_VOL_BIT			15
+#define RT5631_PWR_SPK_R_VOL				(0x1 << 14)
+#define RT5631_PWR_SPK_R_VOL_BIT			14
+#define RT5631_PWR_LOUT_VOL				(0x1 << 13)
+#define RT5631_PWR_LOUT_VOL_BIT			13
+#define RT5631_PWR_ROUT_VOL				(0x1 << 12)
+#define RT5631_PWR_ROUT_VOL_BIT			12
+#define RT5631_PWR_HP_L_OUT_VOL			(0x1 << 11)
+#define RT5631_PWR_HP_L_OUT_VOL_BIT			11
+#define RT5631_PWR_HP_R_OUT_VOL			(0x1 << 10)
+#define RT5631_PWR_HP_R_OUT_VOL_BIT			10
+#define RT5631_PWR_AXIL_IN_VOL				(0x1 << 9)
+#define RT5631_PWR_AXIL_IN_VOL_BIT			9
+#define RT5631_PWR_AXIR_IN_VOL			(0x1 << 8)
+#define RT5631_PWR_AXIR_IN_VOL_BIT			8
+#define RT5631_PWR_MONO_IN_P_VOL			(0x1 << 7)
+#define RT5631_PWR_MONO_IN_P_VOL_BIT			7
+#define RT5631_PWR_MONO_IN_N_VOL			(0x1 << 6)
+#define RT5631_PWR_MONO_IN_N_VOL_BIT			6
+
+/* General Purpose Control Register(0x40) */
+#define RT5631_SPK_AMP_AUTO_RATIO_EN			(0x1 << 15)
+
+#define RT5631_SPK_AMP_RATIO_CTRL_MASK		(0x7 << 12)
+#define RT5631_SPK_AMP_RATIO_CTRL_2_34		(0x0 << 12) /* 7.40DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_99		(0x1 << 12) /* 5.99DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_68		(0x2 << 12) /* 4.50DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_56		(0x3 << 12) /* 3.86DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_44		(0x4 << 12) /* 3.16DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_27		(0x5 << 12) /* 2.10DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_09		(0x6 << 12) /* 0.80DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_00		(0x7 << 12) /* 0.00DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_SHIFT		12
+
+#define RT5631_STEREO_DAC_HI_PASS_FILT_EN		(0x1 << 11)
+#define RT5631_STEREO_ADC_HI_PASS_FILT_EN		(0x1 << 10)
+/* Select ADC Wind Filter Clock type */
+#define RT5631_ADC_WIND_FILT_MASK			(0x3 << 4)
+#define RT5631_ADC_WIND_FILT_8_16_32K			(0x0 << 4) /*8/16/32k*/
+#define RT5631_ADC_WIND_FILT_11_22_44K		(0x1 << 4) /*11/22/44k*/
+#define RT5631_ADC_WIND_FILT_12_24_48K		(0x2 << 4) /*12/24/48k*/
+#define RT5631_ADC_WIND_FILT_EN			(0x1 << 3)
+/* SelectADC Wind Filter Corner Frequency */
+#define RT5631_ADC_WIND_CNR_FREQ_MASK	(0x7 << 0)
+#define RT5631_ADC_WIND_CNR_FREQ_82_113_122	(0x0 << 0) /* 82/113/122 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_102_141_153 (0x1 << 0) /* 102/141/153 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_131_180_156 (0x2 << 0) /* 131/180/156 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_163_225_245 (0x3 << 0) /* 163/225/245 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_204_281_306 (0x4 << 0) /* 204/281/306 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_261_360_392 (0x5 << 0) /* 261/360/392 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_327_450_490 (0x6 << 0) /* 327/450/490 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_408_563_612 (0x7 << 0) /* 408/563/612 Hz */
+
+/* Global Clock Control Register(0x42) */
+#define RT5631_SYSCLK_SOUR_SEL_MASK			(0x3 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_MCLK			(0x0 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_PLL			(0x1 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_PLL_TCK		(0x2 << 14)
+
+#define RT5631_PLLCLK_SOUR_SEL_MASK			(0x3 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_MCLK			(0x0 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_BCLK			(0x1 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_VBCLK			(0x2 << 12)
+
+#define RT5631_PLLCLK_PRE_DIV1				(0x0 << 11)
+#define RT5631_PLLCLK_PRE_DIV2				(0x1 << 11)
+
+/* PLL Control(0x44) */
+#define RT5631_PLL_CTRL_M_VAL(m)			((m)&0xf)
+#define RT5631_PLL_CTRL_K_VAL(k)			(((k)&0x7) << 4)
+#define RT5631_PLL_CTRL_N_VAL(n)			(((n)&0xff) << 8)
+
+/* Internal Status and IRQ Control2(0x4A) */
+#define RT5631_ADC_DATA_SEL_MASK			(0x3 << 14)
+#define RT5631_ADC_DATA_SEL_Disable			(0x0 << 14)
+#define RT5631_ADC_DATA_SEL_MIC1			(0x1 << 14)
+#define RT5631_ADC_DATA_SEL_MIC1_SHIFT		14
+#define RT5631_ADC_DATA_SEL_MIC2			(0x2 << 14)
+#define RT5631_ADC_DATA_SEL_MIC2_SHIFT		15
+#define RT5631_ADC_DATA_SEL_STO			(0x3 << 14)
+#define RT5631_ADC_DATA_SEL_SHIFT			14
+
+/* GPIO Pin Configuration(0x4C) */
+#define RT5631_GPIO_PIN_FUN_SEL_MASK			(0x1 << 15)
+#define RT5631_GPIO_PIN_FUN_SEL_IRQ			(0x1 << 15)
+#define RT5631_GPIO_PIN_FUN_SEL_GPIO_DIMC		(0x0 << 15)
+
+#define RT5631_GPIO_DMIC_FUN_SEL_MASK		(0x1 << 3)
+#define RT5631_GPIO_DMIC_FUN_SEL_DIMC		(0x1 << 3)
+#define RT5631_GPIO_DMIC_FUN_SEL_GPIO			(0x0 << 3)
+
+#define RT5631_GPIO_PIN_CON_MASK			(0x1 << 2)
+#define RT5631_GPIO_PIN_SET_INPUT			(0x0 << 2)
+#define RT5631_GPIO_PIN_SET_OUTPUT			(0x1 << 2)
+
+/* De-POP function Control 1(0x54) */
+#define RT5631_POW_ON_SOFT_GEN			(0x1 << 15)
+#define RT5631_EN_MUTE_UNMUTE_DEPOP			(0x1 << 14)
+#define RT5631_EN_DEPOP2_FOR_HP			(0x1 << 7)
+/* Power Down HPAMP_L Starts Up Signal */
+#define RT5631_PD_HPAMP_L_ST_UP			(0x1 << 5)
+/* Power Down HPAMP_R Starts Up Signal */
+#define RT5631_PD_HPAMP_R_ST_UP			(0x1 << 4)
+/* Enable left HP mute/unmute depop */
+#define RT5631_EN_HP_L_M_UN_MUTE_DEPOP		(0x1 << 1)
+/* Enable right HP mute/unmute depop */
+#define RT5631_EN_HP_R_M_UN_MUTE_DEPOP		(0x1 << 0)
+
+/* De-POP Fnction Control(0x56) */
+#define RT5631_EN_ONE_BIT_DEPOP			(0x1 << 15)
+#define RT5631_EN_CAP_FREE_DEPOP			(0x1 << 14)
+
+/* Jack Detect Control Register(0x5A) */
+#define RT5631_JD_USE_MASK				(0x3 << 14)
+#define RT5631_JD_USE_JD2				(0x3 << 14)
+#define RT5631_JD_USE_JD1				(0x2 << 14)
+#define RT5631_JD_USE_GPIO				(0x1 << 14)
+#define RT5631_JD_OFF					(0x0 << 14)
+/* JD trigger enable for HP */
+#define RT5631_JD_HP_EN					(0x1 << 11)
+#define RT5631_JD_HP_TRI_MASK				(0x1 << 10)
+#define RT5631_JD_HP_TRI_HI				(0x1 << 10)
+#define RT5631_JD_HP_TRI_LO				(0x1 << 10)
+/* JD trigger enable for speaker LP/LN */
+#define RT5631_JD_SPK_L_EN				(0x1 << 9)
+#define RT5631_JD_SPK_L_TRI_MASK			(0x1 << 8)
+#define RT5631_JD_SPK_L_TRI_HI				(0x1 << 8)
+#define RT5631_JD_SPK_L_TRI_LO				(0x0 << 8)
+/* JD trigger enable for speaker RP/RN */
+#define RT5631_JD_SPK_R_EN				(0x1 << 7)
+#define RT5631_JD_SPK_R_TRI_MASK			(0x1 << 6)
+#define RT5631_JD_SPK_R_TRI_HI				(0x1 << 6)
+#define RT5631_JD_SPK_R_TRI_LO				(0x0 << 6)
+/* JD trigger enable for monoout */
+#define RT5631_JD_MONO_EN				(0x1 << 5)
+#define RT5631_JD_MONO_TRI_MASK			(0x1 << 4)
+#define RT5631_JD_MONO_TRI_HI				(0x1 << 4)
+#define RT5631_JD_MONO_TRI_LO				(0x0 << 4)
+/* JD trigger enable for Lout */
+#define RT5631_JD_AUX_1_EN				(0x1 << 3)
+#define RT5631_JD_AUX_1_MASK				(0x1 << 2)
+#define RT5631_JD_AUX_1_TRI_HI				(0x1 << 2)
+#define RT5631_JD_AUX_1_TRI_LO				(0x0 << 2)
+/* JD trigger enable for Rout */
+#define RT5631_JD_AUX_2_EN				(0x1 << 1)
+#define RT5631_JD_AUX_2_MASK				(0x1 << 0)
+#define RT5631_JD_AUX_2_TRI_HI				(0x1 << 0)
+#define RT5631_JD_AUX_2_TRI_LO				(0x0 << 0)
+
+/* ALC CONTROL 1(0x64) */
+#define RT5631_ALC_ATTACK_RATE_MASK			(0x1F << 8)
+#define RT5631_ALC_RECOVERY_RATE_MASK		(0x1F << 0)
+
+/* ALC CONTROL 2(0x65) */
+/* select Compensation gain for Noise gate function */
+#define RT5631_ALC_COM_NOISE_GATE_MASK		(0xF << 0)
+
+/* ALC CONTROL 3(0x66) */
+#define RT5631_ALC_FUN_MASK				(0x3 << 14)
+#define RT5631_ALC_FUN_DIS				(0x0 << 14)
+#define RT5631_ALC_ENA_DAC_PATH			(0x1 << 14)
+#define RT5631_ALC_ENA_ADC_PATH			(0x3 << 14)
+#define RT5631_ALC_PARA_UPDATE			(0x1 << 13)
+#define RT5631_ALC_LIMIT_LEVEL_MASK			(0x1F << 8)
+#define RT5631_ALC_NOISE_GATE_FUN_MASK		(0x1 << 7)
+#define RT5631_ALC_NOISE_GATE_FUN_DIS			(0x0 << 7)
+#define RT5631_ALC_NOISE_GATE_FUN_ENA		(0x1 << 7)
+/* ALC noise gate hold data function */
+#define RT5631_ALC_NOISE_GATE_H_D_MASK		(0x1 << 6)
+#define RT5631_ALC_NOISE_GATE_H_D_DIS			(0x0 << 6)
+#define RT5631_ALC_NOISE_GATE_H_D_ENA		(0x1 << 6)
+
+/* Psedueo Stereo & Spatial Effect Block Control(0x68) */
+#define RT5631_SPATIAL_CTRL_EN				(0x1 << 15)
+#define RT5631_ALL_PASS_FILTER_EN			(0x1 << 14)
+#define RT5631_PSEUDO_STEREO_EN			(0x1 << 13)
+#define RT5631_STEREO_EXPENSION_EN			(0x1 << 12)
+/* 3D gain parameter */
+#define RT5631_GAIN_3D_PARA_MASK		(0x3 << 6)
+#define RT5631_GAIN_3D_PARA_1_00		(0x0 << 6) /* 3D gain 1.0 */
+#define RT5631_GAIN_3D_PARA_1_50		(0x1 << 6) /* 3D gain 1.5 */
+#define RT5631_GAIN_3D_PARA_2_00		(0x2 << 6) /* 3D gain 2.0 */
+/* 3D ratio parameter */
+#define RT5631_RATIO_3D_MASK			(0x3 << 4)
+#define RT5631_RATIO_3D_0_0			(0x0 << 4) /* 3D ratio 0.0 */
+#define RT5631_RATIO_3D_0_66			(0x1 << 4) /* 3D ratio 0.66 */
+#define RT5631_RATIO_3D_1_0			(0x2 << 4) /* 3D ratio 1.0 */
+/* select samplerate for all pass filter */
+#define RT5631_APF_FUN_SLE_MASK			(0x3 << 0)
+#define RT5631_APF_FUN_SEL_48K				(0x3 << 0)
+#define RT5631_APF_FUN_SEL_44_1K			(0x2 << 0)
+#define RT5631_APF_FUN_SEL_32K				(0x1 << 0)
+#define RT5631_APF_FUN_DIS				(0x0 << 0)
+
+/* EQ CONTROL 1(0x6E) */
+#define RT5631_HW_EQ_PATH_SEL_MASK			(0x1 << 15)
+#define RT5631_HW_EQ_PATH_SEL_DAC			(0x0 << 15)
+#define RT5631_HW_EQ_PATH_SEL_ADC			(0x1 << 15)
+#define RT5631_HW_EQ_UPDATE_CTRL			(0x1 << 14)
+
+#define RT5631_EN_HW_EQ_HPF2				(0x1 << 5)
+#define RT5631_EN_HW_EQ_HPF1				(0x1 << 4)
+#define RT5631_EN_HW_EQ_BP3				(0x1 << 3)
+#define RT5631_EN_HW_EQ_BP2				(0x1 << 2)
+#define RT5631_EN_HW_EQ_BP1				(0x1 << 1)
+#define RT5631_EN_HW_EQ_LPF				(0x1 << 0)
+
+
+#endif /* __RTCODEC5631_H__ */