Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 447 insertions, 0 deletions

diff --git a/sound/soc/codecs/ts3a227e.c b/sound/soc/codecs/ts3a227e.c
new file mode 100644
index 000000000..2305a472d
--- /dev/null
+++ b/sound/soc/codecs/ts3a227e.c
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TS3A227E Autonomous Audio Accessory Detection and Configuration Switch
+ *
+ * Copyright (C) 2014 Google, Inc.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/soc.h>
+
+#include "ts3a227e.h"
+
+struct ts3a227e {
+	struct device *dev;
+	struct regmap *regmap;
+	struct snd_soc_jack *jack;
+	bool plugged;
+	bool mic_present;
+	unsigned int buttons_held;
+	int irq;
+};
+
+/* Button values to be reported on the jack */
+static const int ts3a227e_buttons[] = {
+	SND_JACK_BTN_0,
+	SND_JACK_BTN_1,
+	SND_JACK_BTN_2,
+	SND_JACK_BTN_3,
+};
+
+#define TS3A227E_NUM_BUTTONS 4
+#define TS3A227E_JACK_MASK (SND_JACK_HEADPHONE | \
+			    SND_JACK_MICROPHONE | \
+			    SND_JACK_BTN_0 | \
+			    SND_JACK_BTN_1 | \
+			    SND_JACK_BTN_2 | \
+			    SND_JACK_BTN_3)
+
+/* TS3A227E registers */
+#define TS3A227E_REG_DEVICE_ID		0x00
+#define TS3A227E_REG_INTERRUPT		0x01
+#define TS3A227E_REG_KP_INTERRUPT	0x02
+#define TS3A227E_REG_INTERRUPT_DISABLE	0x03
+#define TS3A227E_REG_SETTING_1		0x04
+#define TS3A227E_REG_SETTING_2		0x05
+#define TS3A227E_REG_SETTING_3		0x06
+#define TS3A227E_REG_SWITCH_CONTROL_1	0x07
+#define TS3A227E_REG_SWITCH_CONTROL_2	0x08
+#define TS3A227E_REG_SWITCH_STATUS_1	0x09
+#define TS3A227E_REG_SWITCH_STATUS_2	0x0a
+#define TS3A227E_REG_ACCESSORY_STATUS	0x0b
+#define TS3A227E_REG_ADC_OUTPUT		0x0c
+#define TS3A227E_REG_KP_THRESHOLD_1	0x0d
+#define TS3A227E_REG_KP_THRESHOLD_2	0x0e
+#define TS3A227E_REG_KP_THRESHOLD_3	0x0f
+
+/* TS3A227E_REG_INTERRUPT 0x01 */
+#define INS_REM_EVENT 0x01
+#define DETECTION_COMPLETE_EVENT 0x02
+
+/* TS3A227E_REG_KP_INTERRUPT 0x02 */
+#define PRESS_MASK(idx) (0x01 << (2 * (idx)))
+#define RELEASE_MASK(idx) (0x02 << (2 * (idx)))
+
+/* TS3A227E_REG_INTERRUPT_DISABLE 0x03 */
+#define INS_REM_INT_DISABLE 0x01
+#define DETECTION_COMPLETE_INT_DISABLE 0x02
+#define ADC_COMPLETE_INT_DISABLE 0x04
+#define INTB_DISABLE 0x08
+
+/* TS3A227E_REG_SETTING_1 0x4 */
+#define DEBOUNCE_INSERTION_SETTING_SFT (0)
+#define DEBOUNCE_INSERTION_SETTING_MASK (0x7 << DEBOUNCE_PRESS_SETTING_SFT)
+
+/* TS3A227E_REG_SETTING_2 0x05 */
+#define KP_ENABLE 0x04
+
+/* TS3A227E_REG_SETTING_3 0x06 */
+#define MICBIAS_SETTING_SFT 3
+#define MICBIAS_SETTING_MASK (0x7 << MICBIAS_SETTING_SFT)
+#define DEBOUNCE_RELEASE_SETTING_SFT 2
+#define DEBOUNCE_RELEASE_SETTING_MASK (0x1 << DEBOUNCE_RELEASE_SETTING_SFT)
+#define DEBOUNCE_PRESS_SETTING_SFT 0
+#define DEBOUNCE_PRESS_SETTING_MASK (0x3 << DEBOUNCE_PRESS_SETTING_SFT)
+
+/* TS3A227E_REG_ACCESSORY_STATUS  0x0b */
+#define TYPE_3_POLE 0x01
+#define TYPE_4_POLE_OMTP 0x02
+#define TYPE_4_POLE_STANDARD 0x04
+#define JACK_INSERTED 0x08
+#define EITHER_MIC_MASK (TYPE_4_POLE_OMTP | TYPE_4_POLE_STANDARD)
+
+static const struct reg_default ts3a227e_reg_defaults[] = {
+	{ TS3A227E_REG_DEVICE_ID, 0x10 },
+	{ TS3A227E_REG_INTERRUPT, 0x00 },
+	{ TS3A227E_REG_KP_INTERRUPT, 0x00 },
+	{ TS3A227E_REG_INTERRUPT_DISABLE, 0x08 },
+	{ TS3A227E_REG_SETTING_1, 0x23 },
+	{ TS3A227E_REG_SETTING_2, 0x00 },
+	{ TS3A227E_REG_SETTING_3, 0x0e },
+	{ TS3A227E_REG_SWITCH_CONTROL_1, 0x00 },
+	{ TS3A227E_REG_SWITCH_CONTROL_2, 0x00 },
+	{ TS3A227E_REG_SWITCH_STATUS_1, 0x0c },
+	{ TS3A227E_REG_SWITCH_STATUS_2, 0x00 },
+	{ TS3A227E_REG_ACCESSORY_STATUS, 0x00 },
+	{ TS3A227E_REG_ADC_OUTPUT, 0x00 },
+	{ TS3A227E_REG_KP_THRESHOLD_1, 0x20 },
+	{ TS3A227E_REG_KP_THRESHOLD_2, 0x40 },
+	{ TS3A227E_REG_KP_THRESHOLD_3, 0x68 },
+};
+
+static bool ts3a227e_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TS3A227E_REG_DEVICE_ID ... TS3A227E_REG_KP_THRESHOLD_3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool ts3a227e_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TS3A227E_REG_INTERRUPT_DISABLE ... TS3A227E_REG_SWITCH_CONTROL_2:
+	case TS3A227E_REG_KP_THRESHOLD_1 ... TS3A227E_REG_KP_THRESHOLD_3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool ts3a227e_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TS3A227E_REG_INTERRUPT ... TS3A227E_REG_INTERRUPT_DISABLE:
+	case TS3A227E_REG_SETTING_1 ... TS3A227E_REG_SETTING_2:
+	case TS3A227E_REG_SWITCH_STATUS_1 ... TS3A227E_REG_ADC_OUTPUT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void ts3a227e_jack_report(struct ts3a227e *ts3a227e)
+{
+	unsigned int i;
+	int report = 0;
+
+	if (!ts3a227e->jack)
+		return;
+
+	if (ts3a227e->plugged)
+		report = SND_JACK_HEADPHONE;
+	if (ts3a227e->mic_present)
+		report |= SND_JACK_MICROPHONE;
+	for (i = 0; i < TS3A227E_NUM_BUTTONS; i++) {
+		if (ts3a227e->buttons_held & (1 << i))
+			report |= ts3a227e_buttons[i];
+	}
+	snd_soc_jack_report(ts3a227e->jack, report, TS3A227E_JACK_MASK);
+}
+
+static void ts3a227e_new_jack_state(struct ts3a227e *ts3a227e, unsigned acc_reg)
+{
+	bool plugged, mic_present;
+
+	plugged = !!(acc_reg & JACK_INSERTED);
+	mic_present = plugged && !!(acc_reg & EITHER_MIC_MASK);
+
+	ts3a227e->plugged = plugged;
+
+	if (mic_present != ts3a227e->mic_present) {
+		ts3a227e->mic_present = mic_present;
+		ts3a227e->buttons_held = 0;
+		if (mic_present) {
+			/* Enable key press detection. */
+			regmap_update_bits(ts3a227e->regmap,
+					   TS3A227E_REG_SETTING_2,
+					   KP_ENABLE, KP_ENABLE);
+		}
+	}
+}
+
+static irqreturn_t ts3a227e_interrupt(int irq, void *data)
+{
+	struct ts3a227e *ts3a227e = (struct ts3a227e *)data;
+	struct regmap *regmap = ts3a227e->regmap;
+	unsigned int int_reg, kp_int_reg, acc_reg, i;
+	struct device *dev = ts3a227e->dev;
+	int ret;
+
+	/* Check for plug/unplug. */
+	ret = regmap_read(regmap, TS3A227E_REG_INTERRUPT, &int_reg);
+	if (ret) {
+		dev_err(dev, "failed to clear interrupt ret=%d\n", ret);
+		return IRQ_NONE;
+	}
+
+	if (int_reg & (DETECTION_COMPLETE_EVENT | INS_REM_EVENT)) {
+		regmap_read(regmap, TS3A227E_REG_ACCESSORY_STATUS, &acc_reg);
+		ts3a227e_new_jack_state(ts3a227e, acc_reg);
+	}
+
+	/* Report any key events. */
+	ret = regmap_read(regmap, TS3A227E_REG_KP_INTERRUPT, &kp_int_reg);
+	if (ret) {
+		dev_err(dev, "failed to clear key interrupt ret=%d\n", ret);
+		return IRQ_NONE;
+	}
+
+	for (i = 0; i < TS3A227E_NUM_BUTTONS; i++) {
+		if (kp_int_reg & PRESS_MASK(i))
+			ts3a227e->buttons_held |= (1 << i);
+		if (kp_int_reg & RELEASE_MASK(i))
+			ts3a227e->buttons_held &= ~(1 << i);
+	}
+
+	ts3a227e_jack_report(ts3a227e);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ts3a227e_enable_jack_detect - Specify a jack for event reporting
+ *
+ * @component:  component to register the jack with
+ * @jack: jack to use to report headset and button events on
+ *
+ * After this function has been called the headset insert/remove and button
+ * events 0-3 will be routed to the given jack.  Jack can be null to stop
+ * reporting.
+ */
+int ts3a227e_enable_jack_detect(struct snd_soc_component *component,
+				struct snd_soc_jack *jack)
+{
+	struct ts3a227e *ts3a227e = snd_soc_component_get_drvdata(component);
+
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	ts3a227e->jack = jack;
+	ts3a227e_jack_report(ts3a227e);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ts3a227e_enable_jack_detect);
+
+static struct snd_soc_component_driver ts3a227e_soc_driver;
+
+static const struct regmap_config ts3a227e_regmap_config = {
+	.val_bits = 8,
+	.reg_bits = 8,
+
+	.max_register = TS3A227E_REG_KP_THRESHOLD_3,
+	.readable_reg = ts3a227e_readable_reg,
+	.writeable_reg = ts3a227e_writeable_reg,
+	.volatile_reg = ts3a227e_volatile_reg,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = ts3a227e_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(ts3a227e_reg_defaults),
+};
+
+static int ts3a227e_parse_device_property(struct ts3a227e *ts3a227e,
+				struct device *dev)
+{
+	u32 value;
+	u32 value_ms;
+	u32 setting3_value = 0;
+	u32 setting3_mask = 0;
+	int err;
+
+	err = device_property_read_u32(dev, "ti,micbias", &value);
+	if (!err) {
+		setting3_mask = MICBIAS_SETTING_MASK;
+		setting3_value = (value << MICBIAS_SETTING_SFT) &
+				 MICBIAS_SETTING_MASK;
+	}
+
+	err = device_property_read_u32(dev, "ti,debounce-release-ms",
+				       &value_ms);
+	if (!err) {
+		value = (value_ms > 10);
+		setting3_mask |= DEBOUNCE_RELEASE_SETTING_MASK;
+		setting3_value |= (value << DEBOUNCE_RELEASE_SETTING_SFT) &
+				  DEBOUNCE_RELEASE_SETTING_MASK;
+	}
+
+	err = device_property_read_u32(dev, "ti,debounce-press-ms", &value_ms);
+	if (!err) {
+		value = (value_ms + 20) / 40;
+		if (value > 3)
+			value = 3;
+		setting3_mask |= DEBOUNCE_PRESS_SETTING_MASK;
+		setting3_value |= (value << DEBOUNCE_PRESS_SETTING_SFT) &
+				  DEBOUNCE_PRESS_SETTING_MASK;
+	}
+
+	if (setting3_mask)
+		regmap_update_bits(ts3a227e->regmap, TS3A227E_REG_SETTING_3,
+				   setting3_mask, setting3_value);
+
+	err = device_property_read_u32(dev, "ti,debounce-insertion-ms",
+				       &value_ms);
+	if (!err) {
+		if (value_ms < 165)
+			value = (value_ms + 15) / 30;
+		else if (value_ms < 1500)
+			value = 6;
+		else
+			value = 7;
+		regmap_update_bits(ts3a227e->regmap, TS3A227E_REG_SETTING_1,
+				   DEBOUNCE_INSERTION_SETTING_MASK,
+				   (value << DEBOUNCE_INSERTION_SETTING_SFT) &
+					   DEBOUNCE_INSERTION_SETTING_MASK);
+	}
+
+	return 0;
+}
+
+static int ts3a227e_i2c_probe(struct i2c_client *i2c)
+{
+	struct ts3a227e *ts3a227e;
+	struct device *dev = &i2c->dev;
+	int ret;
+	unsigned int acc_reg;
+
+	ts3a227e = devm_kzalloc(&i2c->dev, sizeof(*ts3a227e), GFP_KERNEL);
+	if (ts3a227e == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, ts3a227e);
+	ts3a227e->dev = dev;
+	ts3a227e->irq = i2c->irq;
+
+	ts3a227e->regmap = devm_regmap_init_i2c(i2c, &ts3a227e_regmap_config);
+	if (IS_ERR(ts3a227e->regmap))
+		return PTR_ERR(ts3a227e->regmap);
+
+	ret = ts3a227e_parse_device_property(ts3a227e, dev);
+	if (ret) {
+		dev_err(dev, "Failed to parse device property: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, i2c->irq, NULL, ts3a227e_interrupt,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"TS3A227E", ts3a227e);
+	if (ret) {
+		dev_err(dev, "Cannot request irq %d (%d)\n", i2c->irq, ret);
+		return ret;
+	}
+
+	ret = devm_snd_soc_register_component(&i2c->dev, &ts3a227e_soc_driver,
+					      NULL, 0);
+	if (ret)
+		return ret;
+
+	/* Enable interrupts except for ADC complete. */
+	regmap_update_bits(ts3a227e->regmap, TS3A227E_REG_INTERRUPT_DISABLE,
+			   INTB_DISABLE | ADC_COMPLETE_INT_DISABLE,
+			   ADC_COMPLETE_INT_DISABLE);
+
+	/* Read jack status because chip might not trigger interrupt at boot. */
+	regmap_read(ts3a227e->regmap, TS3A227E_REG_ACCESSORY_STATUS, &acc_reg);
+	ts3a227e_new_jack_state(ts3a227e, acc_reg);
+	ts3a227e_jack_report(ts3a227e);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ts3a227e_suspend(struct device *dev)
+{
+	struct ts3a227e *ts3a227e = dev_get_drvdata(dev);
+
+	dev_dbg(ts3a227e->dev, "suspend disable irq\n");
+	disable_irq(ts3a227e->irq);
+
+	return 0;
+}
+
+static int ts3a227e_resume(struct device *dev)
+{
+	struct ts3a227e *ts3a227e = dev_get_drvdata(dev);
+
+	dev_dbg(ts3a227e->dev, "resume enable irq\n");
+	enable_irq(ts3a227e->irq);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops ts3a227e_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(ts3a227e_suspend, ts3a227e_resume)
+};
+
+static const struct i2c_device_id ts3a227e_i2c_ids[] = {
+	{ "ts3a227e", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ts3a227e_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ts3a227e_of_match[] = {
+	{ .compatible = "ti,ts3a227e", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ts3a227e_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static struct acpi_device_id ts3a227e_acpi_match[] = {
+	{ "104C227E", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, ts3a227e_acpi_match);
+#endif
+
+static struct i2c_driver ts3a227e_driver = {
+	.driver = {
+		.name = "ts3a227e",
+		.pm = &ts3a227e_pm,
+		.of_match_table = of_match_ptr(ts3a227e_of_match),
+		.acpi_match_table = ACPI_PTR(ts3a227e_acpi_match),
+	},
+	.probe_new = ts3a227e_i2c_probe,
+	.id_table = ts3a227e_i2c_ids,
+};
+module_i2c_driver(ts3a227e_driver);
+
+MODULE_DESCRIPTION("ASoC ts3a227e driver");
+MODULE_AUTHOR("Dylan Reid <dgreid@chromium.org>");
+MODULE_LICENSE("GPL v2");