Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 242 insertions, 0 deletions

diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
new file mode 100644
index 000000000..73f3e61f2
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Freescale MPC5200 PSC in I2S mode
+// ALSA SoC Digital Audio Interface (DAI) driver
+//
+// Copyright (C) 2008 Secret Lab Technologies Ltd.
+// Copyright (C) 2009 Jon Smirl, Digispeaker
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+
+/**
+ * PSC_I2S_RATES: sample rates supported by the I2S
+ *
+ * This driver currently only supports the PSC running in I2S slave mode,
+ * which means the codec determines the sample rate.  Therefore, we tell
+ * ALSA that we support all rates and let the codec driver decide what rates
+ * are really supported.
+ */
+#define PSC_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
+
+/**
+ * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
+ */
+#define PSC_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
+			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
+
+static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
+	u32 mode;
+
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+		" periods=%i buffer_size=%i  buffer_bytes=%i\n",
+		__func__, substream, params_period_size(params),
+		params_period_bytes(params), params_periods(params),
+		params_buffer_size(params), params_buffer_bytes(params));
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		mode = MPC52xx_PSC_SICR_SIM_CODEC_8;
+		break;
+	case SNDRV_PCM_FORMAT_S16_BE:
+		mode = MPC52xx_PSC_SICR_SIM_CODEC_16;
+		break;
+	case SNDRV_PCM_FORMAT_S24_BE:
+		mode = MPC52xx_PSC_SICR_SIM_CODEC_24;
+		break;
+	case SNDRV_PCM_FORMAT_S32_BE:
+		mode = MPC52xx_PSC_SICR_SIM_CODEC_32;
+		break;
+	default:
+		dev_dbg(psc_dma->dev, "invalid format\n");
+		return -EINVAL;
+	}
+	out_be32(&psc_dma->psc_regs->sicr, psc_dma->sicr | mode);
+
+	return 0;
+}
+
+/**
+ * psc_i2s_set_sysclk: set the clock frequency and direction
+ *
+ * This function is called by the machine driver to tell us what the clock
+ * frequency and direction are.
+ *
+ * Currently, we only support operating as a clock slave (SND_SOC_CLOCK_IN),
+ * and we don't care about the frequency.  Return an error if the direction
+ * is not SND_SOC_CLOCK_IN.
+ *
+ * @clk_id: reserved, should be zero
+ * @freq: the frequency of the given clock ID, currently ignored
+ * @dir: SND_SOC_CLOCK_IN (clock slave) or SND_SOC_CLOCK_OUT (clock master)
+ */
+static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
+			      int clk_id, unsigned int freq, int dir)
+{
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(cpu_dai);
+	dev_dbg(psc_dma->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
+				cpu_dai, dir);
+	return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
+}
+
+/**
+ * psc_i2s_set_fmt: set the serial format.
+ *
+ * This function is called by the machine driver to tell us what serial
+ * format to use.
+ *
+ * This driver only supports I2S mode.  Return an error if the format is
+ * not SND_SOC_DAIFMT_I2S.
+ *
+ * @format: one of SND_SOC_DAIFMT_xxx
+ */
+static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
+{
+	struct psc_dma *psc_dma = snd_soc_dai_get_drvdata(cpu_dai);
+	dev_dbg(psc_dma->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
+				cpu_dai, format);
+	return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
+}
+
+/* ---------------------------------------------------------------------
+ * ALSA SoC Bindings
+ *
+ * - Digital Audio Interface (DAI) template
+ * - create/destroy dai hooks
+ */
+
+/**
+ * psc_i2s_dai_template: template CPU Digital Audio Interface
+ */
+static const struct snd_soc_dai_ops psc_i2s_dai_ops = {
+	.hw_params	= psc_i2s_hw_params,
+	.set_sysclk	= psc_i2s_set_sysclk,
+	.set_fmt	= psc_i2s_set_fmt,
+};
+
+static struct snd_soc_dai_driver psc_i2s_dai[] = {{
+	.name = "mpc5200-psc-i2s.0",
+	.playback = {
+		.stream_name = "I2S Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PSC_I2S_RATES,
+		.formats = PSC_I2S_FORMATS,
+	},
+	.capture = {
+		.stream_name = "I2S Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PSC_I2S_RATES,
+		.formats = PSC_I2S_FORMATS,
+	},
+	.ops = &psc_i2s_dai_ops,
+} };
+
+static const struct snd_soc_component_driver psc_i2s_component = {
+	.name			= "mpc5200-i2s",
+	.legacy_dai_naming	= 1,
+};
+
+/* ---------------------------------------------------------------------
+ * OF platform bus binding code:
+ * - Probe/remove operations
+ * - OF device match table
+ */
+static int psc_i2s_of_probe(struct platform_device *op)
+{
+	int rc;
+	struct psc_dma *psc_dma;
+	struct mpc52xx_psc __iomem *regs;
+
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	rc = snd_soc_register_component(&op->dev, &psc_i2s_component,
+					psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
+	if (rc != 0) {
+		pr_err("Failed to register DAI\n");
+		return rc;
+	}
+
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
+
+	/* Configure the serial interface mode; defaulting to CODEC8 mode */
+	psc_dma->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
+			MPC52xx_PSC_SICR_CLKPOL;
+	out_be32(&psc_dma->psc_regs->sicr,
+		 psc_dma->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
+
+	/* Check for the codec handle.  If it is not present then we
+	 * are done */
+	if (!of_get_property(op->dev.of_node, "codec-handle", NULL))
+		return 0;
+
+	/* Due to errata in the dma mode; need to line up enabling
+	 * the transmitter with a transition on the frame sync
+	 * line */
+
+	/* first make sure it is low */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
+		;
+	/* then wait for the transition to high */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
+		;
+	/* Finally, enable the PSC.
+	 * Receiver must always be enabled; even when we only want
+	 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
+
+	/* Go */
+	out_8(&psc_dma->psc_regs->command,
+			MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+
+	return 0;
+
+}
+
+static int psc_i2s_of_remove(struct platform_device *op)
+{
+	mpc5200_audio_dma_destroy(op);
+	snd_soc_unregister_component(&op->dev);
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id psc_i2s_match[] = {
+	{ .compatible = "fsl,mpc5200-psc-i2s", },
+	{ .compatible = "fsl,mpc5200b-psc-i2s", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, psc_i2s_match);
+
+static struct platform_driver psc_i2s_driver = {
+	.probe = psc_i2s_of_probe,
+	.remove = psc_i2s_of_remove,
+	.driver = {
+		.name = "mpc5200-psc-i2s",
+		.of_match_table = psc_i2s_match,
+	},
+};
+
+module_platform_driver(psc_i2s_driver);
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
+MODULE_LICENSE("GPL");
+