Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 688 insertions, 0 deletions

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
new file mode 100644
index 000000000..99308ed85
--- /dev/null
+++ b/sound/soc/intel/boards/Kconfig
@@ -0,0 +1,688 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig SND_SOC_INTEL_MACH
+	bool "Intel Machine drivers"
+	depends on SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL
+	help
+	 Intel ASoC Machine Drivers. If you have a Intel machine that
+	 has an audio controller with a DSP and I2S or DMIC port, then
+	 enable this option by saying Y
+
+	 Note that the answer to this question doesn't directly affect the
+	 kernel: saying N will just cause the configurator to skip all
+	 the questions about Intel ASoC machine drivers.
+
+if SND_SOC_INTEL_MACH
+
+config SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES
+	bool "Use more user friendly long card names"
+	help
+	  Some drivers report the I/O configuration to userspace through the
+	  soundcard's long card name in the control user space AP. An unfortunate
+	  side effect is that this long name may also be used by the GUI,
+	  confusing users with information they don't need.
+	  This option prevents the long name from being modified, and the I/O
+	  configuration will be provided through a different component interface.
+	  Select Y if userspace like UCM (Use Case Manager) uses the component
+	  interface.
+	  If unsure select N.
+
+config SND_SOC_INTEL_HDA_DSP_COMMON
+	tristate
+
+config SND_SOC_INTEL_SOF_MAXIM_COMMON
+	tristate
+
+config SND_SOC_INTEL_SOF_REALTEK_COMMON
+	tristate
+
+config SND_SOC_INTEL_SOF_CIRRUS_COMMON
+	tristate
+
+if SND_SOC_INTEL_CATPT
+
+config SND_SOC_INTEL_HASWELL_MACH
+	tristate "Haswell with RT5640 I2S codec"
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT5640
+	help
+	  This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
+	  Ultrabook platforms. This is a recommended option.
+	  Say Y or m if you have such a device.
+	  If unsure select "N".
+
+endif ## SND_SOC_INTEL_CATPT
+
+if SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL
+
+config SND_SOC_INTEL_BDW_RT5650_MACH
+	tristate "Broadwell with RT5650 codec"
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT5645
+	help
+	  This adds the ASoC machine driver for Intel Broadwell platforms with
+	  the RT5650 codec.
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BDW_RT5677_MACH
+	tristate "Broadwell with RT5677 codec"
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on SPI_MASTER
+	select SPI_PXA2XX
+	select SND_SOC_RT5677_SPI
+	select SND_SOC_RT5677
+	help
+	  This adds support for Intel Broadwell platform based boards with
+	  the RT5677 audio codec. This is a recommended option.
+	  Say Y or m if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BROADWELL_MACH
+	tristate "Broadwell with RT286 I2S codec"
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT286
+	help
+	  This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
+	  Ultrabook platforms.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+endif ## SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL
+
+if SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL
+
+config SND_SOC_INTEL_BYTCR_RT5640_MACH
+	tristate "Baytrail and Baytrail-CR with RT5640 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_RT5640
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+	  platforms with RT5640 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BYTCR_RT5651_MACH
+	tristate "Baytrail and Baytrail-CR with RT5651 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_RT5651
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+	  platforms with RT5651 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BYTCR_WM5102_MACH
+	tristate "Baytrail and Baytrail-CR with WM5102 codec"
+	depends on MFD_ARIZONA && MFD_WM5102 && SPI_MASTER && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_WM5102
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+	  platforms with WM5102 audio codec.
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
+	tristate "Cherrytrail & Braswell with RT5672 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_RT5670
+	help
+	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+	  platforms with RT5672 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
+	tristate "Cherrytrail & Braswell with RT5645/5650 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_RT5645
+	help
+	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+	  platforms with RT5645/5650 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
+	tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_MAX98090
+	select SND_SOC_TS3A227E
+	help
+	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+	  platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
+	tristate "Cherrytrail & Braswell with NAU88L24 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_NAU8824
+	help
+	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+	  platforms with NAU88L24 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_CX2072X_MACH
+	tristate "Baytrail & Cherrytrail with CX2072X codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_CX2072X
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail &
+	  Cherrytrail platforms with Conexant CX2072X audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
+	tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_DA7213
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
+	  platforms with DA7212/7213 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
+	tristate "Baytrail & Cherrytrail with ES8316 codec"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_ACPI
+	select SND_SOC_ES8316
+	help
+	  This adds support for ASoC machine driver for Intel(R) Baytrail &
+	  Cherrytrail platforms with ES8316 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+endif ## SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL
+
+if SND_SST_ATOM_HIFI2_PLATFORM
+
+config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
+	tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
+	help
+	  This adds support for ASoC machine driver for the MinnowBoard Max or
+	  Up boards and provides access to I2S signals on the Low-Speed
+	  connector. This is not a recommended option outside of these cases.
+	  It is not intended to be enabled by distros by default.
+	  Say Y or m if you have such a device.
+
+	  If unsure select "N".
+
+endif ## SND_SST_ATOM_HIFI2_PLATFORM
+
+if SND_SOC_INTEL_SKL
+
+config SND_SOC_INTEL_SKL_RT286_MACH
+	tristate "SKL with RT286 I2S mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT286
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	help
+	   This adds support for ASoC machine driver for Skylake platforms
+	   with RT286 I2S audio codec.
+	   Say Y or m if you have such a device.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
+	tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_NAU8825
+	select SND_SOC_SSM4567
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for NAU88L25 + SSM4567.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
+	tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_NAU8825
+	select SND_SOC_MAX98357A
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for NAU88L25 + MAX98357A.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+endif ## SND_SOC_INTEL_SKL
+
+config SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
+	tristate
+	select SND_SOC_DA7219
+	select SND_SOC_MAX98357A
+	select SND_SOC_MAX98390
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+
+config SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
+	tristate
+	select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
+
+if SND_SOC_INTEL_APL
+
+config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
+	tristate "Broxton with DA7219 and MAX98357A/MAX98390 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
+	help
+	   This adds support for ASoC machine driver for Broxton-P platforms
+	   with DA7219 + MAX98357A/MAX98390 I2S audio codec.
+	   Say Y or m if you have such a device. This is a recommended option.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_BXT_RT298_MACH
+	tristate "Broxton with RT298 I2S mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT298
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	help
+	   This adds support for ASoC machine driver for Broxton platforms
+	   with RT286 I2S audio codec.
+	   Say Y or m if you have such a device. This is a recommended option.
+	   If unsure select "N".
+
+endif ## SND_SOC_INTEL_APL
+
+if SND_SOC_SOF_APOLLOLAKE
+
+config SND_SOC_INTEL_SOF_WM8804_MACH
+	tristate "SOF with Wolfson/Cirrus WM8804 codec"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_WM8804_I2C
+	help
+	  This adds support for ASoC machine driver for Intel platforms
+	  with the Wolfson/Cirrus WM8804 I2S audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+endif ## SND_SOC_SOF_APOLLOLAKE
+
+if SND_SOC_INTEL_KBL
+
+config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
+	tristate "KBL with RT5663 and MAX98927 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT5663
+	select SND_SOC_MAX98927
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_SKYLAKE_SSP_CLK
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for RT5663 + MAX98927.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
+	tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SPI
+	select SND_SOC_RT5663
+	select SND_SOC_RT5514
+	select SND_SOC_RT5514_SPI
+	select SND_SOC_MAX98927
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_SKYLAKE_SSP_CLK
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for RT5663 + RT5514 + MAX98927.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
+	tristate "KBL with DA7219 and MAX98357A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for DA7219 + MAX98357A I2S audio codec.
+	  Say Y if you have such a device.
+
+config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
+	tristate "KBL with DA7219 and MAX98927 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_DA7219
+	select SND_SOC_MAX98927
+	select SND_SOC_MAX98373_I2C
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for DA7219 + MAX98927 I2S audio codec.
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_KBL_RT5660_MACH
+	tristate "KBL with RT5660 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	select SND_SOC_RT5660
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for RT5660 I2S audio codec.
+	  Say Y if you have such a device.
+
+endif ## SND_SOC_INTEL_KBL
+
+if SND_SOC_SOF_GEMINILAKE
+
+config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH
+	tristate "GLK with DA7219 and MAX98357A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
+	help
+	   This adds support for ASoC machine driver for Geminilake platforms
+	   with DA7219 + MAX98357A I2S audio codec.
+	   Say Y or m if you have such a device. This is a recommended option.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
+	tristate "GLK with RT5682 and MAX98357A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_RT5682_I2C
+	select SND_SOC_RT5682S
+	select SND_SOC_MAX98357A
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	help
+	   This adds support for ASoC machine driver for Geminilake platforms
+	   with RT5682 + MAX98357A I2S audio codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+
+endif ## SND_SOC_SOF_GEMINILAKE
+
+if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
+
+config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
+	tristate "Skylake+ with HDA Codecs"
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_DMIC
+	# SND_SOC_HDAC_HDA is already selected
+	help
+	  This adds support for ASoC machine driver for Intel Skylake+
+	  platforms with display (HDMI/DP) and HDA audio codecs, and
+	  Smart Sound Technology (SST) integrated audio DSP.
+	  Say Y or m if you have such a device. This is a recommended option.
+	  If unsure select "N".
+
+endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
+
+if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
+config SND_SOC_INTEL_SOF_RT5682_MACH
+	tristate "SOF with rt5682 codec in I2S Mode"
+	depends on I2C && ACPI
+	depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
+		    (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
+		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
+	select SND_SOC_MAX98373_I2C
+	select SND_SOC_MAX98390
+	select SND_SOC_RT1011
+	select SND_SOC_RT1015
+	select SND_SOC_RT1015P
+	select SND_SOC_RT5682_I2C
+	select SND_SOC_RT5682S
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_INTEL_SOF_MAXIM_COMMON
+	select SND_SOC_INTEL_SOF_REALTEK_COMMON
+	help
+	   This adds support for ASoC machine driver for SOF platforms
+	   with rt5682 codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_SOF_CS42L42_MACH
+	tristate "SOF with cs42l42 codec in I2S Mode"
+	depends on I2C && ACPI
+	depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
+		    (MFD_INTEL_LPSS || COMPILE_TEST))
+	select SND_SOC_CS42L42
+	select SND_SOC_MAX98357A
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_INTEL_SOF_MAXIM_COMMON
+	help
+	   This adds support for ASoC machine driver for SOF platforms
+	   with cs42l42 codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_SOF_PCM512x_MACH
+	tristate "SOF with TI PCM512x codec"
+	depends on I2C && ACPI
+	depends on (SND_SOC_SOF_HDA_AUDIO_CODEC && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
+		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
+	depends on SND_HDA_CODEC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_PCM512x_I2C
+	help
+	  This adds support for ASoC machine driver for SOF platforms
+	  with TI PCM512x I2S audio codec.
+	  Say Y or m if you have such a device.
+	  If unsure select "N".
+
+config SND_SOC_INTEL_SOF_ES8336_MACH
+	tristate "SOF with ES8336 or ES8326 codec in I2S mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_ES8316
+	select SND_SOC_ES8326
+	select SND_SOC_DMIC
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	help
+	   This adds support for ASoC machine driver for SOF platforms
+	   with es8336 codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_SOF_NAU8825_MACH
+	tristate "SOF with nau8825 codec in I2S Mode"
+	depends on I2C && ACPI
+	depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
+		    (MFD_INTEL_LPSS || COMPILE_TEST))
+	select SND_SOC_NAU8825
+	select SND_SOC_RT1015P
+	select SND_SOC_MAX98373_I2C
+	select SND_SOC_MAX98357A
+	select SND_SOC_NAU8315
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_INTEL_SOF_MAXIM_COMMON
+	select SND_SOC_INTEL_SOF_REALTEK_COMMON
+	help
+	   This adds support for ASoC machine driver for SOF platforms
+	   with nau8825 codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+
+endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
+
+if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK)
+
+config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH
+	tristate "CML_LP with DA7219 and MAX98357A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
+	help
+	   This adds support for ASoC machine driver for Cometlake platforms
+	   with DA7219 + MAX98357A I2S audio codec.
+	   Say Y or m if you have such a device. This is a recommended option.
+	   If unsure select "N".
+
+config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH
+	tristate "CML with RT1011 and RT5682 in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_RT1011
+	select SND_SOC_RT5682_I2C
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	help
+	  This adds support for ASoC machine driver for SOF platform with
+	  RT1011 + RT5682 I2S codec.
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK
+
+if SND_SOC_SOF_JASPERLAKE
+
+config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH
+	tristate "SOF with DA7219 and MAX98373/MAX98360A in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_DA7219
+	select SND_SOC_MAX98373_I2C
+	select SND_SOC_DMIC
+	help
+	  This adds support for ASoC machine driver for SOF platforms
+	  with DA7219 + MAX98373/MAX98360A I2S audio codec.
+	  Say Y if you have such a device.
+	  If unsure select "N".
+
+endif ## SND_SOC_SOF_JASPERLAKE
+
+if SND_SOC_SOF_HDA_LINK
+
+config SND_SOC_INTEL_SOF_SSP_AMP_MACH
+	tristate "SOF with amplifiers in I2S Mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	select SND_SOC_RT1308
+	select SND_SOC_CS35L41_I2C
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_INTEL_SOF_REALTEK_COMMON
+	select SND_SOC_INTEL_SOF_CIRRUS_COMMON
+	help
+	   This adds support for ASoC machine driver for SOF platforms
+	   with RT1308/CS35L41 I2S audio codec.
+	   Say Y if you have such a device.
+	   If unsure select "N".
+endif ## SND_SOC_SOF_HDA_LINK
+
+if SND_SOC_SOF_ELKHARTLAKE
+
+config SND_SOC_INTEL_EHL_RT5660_MACH
+	tristate "EHL with RT5660 in I2S mode"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
+	select SND_SOC_RT5660
+	select SND_SOC_DMIC
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	help
+	  This adds support for ASoC machine driver for Elkhart Lake
+	  platform with RT5660 I2S audio codec.
+
+endif ## SND_SOC_SOF_ELKHARTLAKE
+
+if SND_SOC_SOF_INTEL_SOUNDWIRE
+
+config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH
+	tristate "SoundWire generic machine driver"
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
+	depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST
+	depends on SOUNDWIRE
+	select SND_SOC_MAX98373_I2C
+	select SND_SOC_MAX98373_SDW
+	select SND_SOC_RT700_SDW
+	select SND_SOC_RT711_SDW
+	select SND_SOC_RT711_SDCA_SDW
+	select SND_SOC_RT1308_SDW
+	select SND_SOC_RT1308
+	select SND_SOC_RT1316_SDW
+	select SND_SOC_RT1318_SDW
+	select SND_SOC_RT715_SDW
+	select SND_SOC_RT715_SDCA_SDW
+	select SND_SOC_RT5682_SDW
+	select SND_SOC_DMIC
+	select SND_SOC_INTEL_HDA_DSP_COMMON
+	select SND_SOC_INTEL_SOF_MAXIM_COMMON
+	imply SND_SOC_SDW_MOCKUP
+	help
+	  Add support for Intel SoundWire-based platforms connected to
+	  MAX98373, RT700, RT711, RT1308 and RT715
+	  If unsure select "N".
+
+endif
+
+endif ## SND_SOC_INTEL_MACH