Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 544 insertions, 0 deletions

diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
new file mode 100644
index 000000000..49d3da8f7
--- /dev/null
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  cht_bsw_rt5672.c - ASoc Machine driver for Intel Cherryview-based platforms
+ *                     Cherrytrail and Braswell, with RT5672 codec.
+ *
+ *  Copyright (C) 2014 Intel Corp
+ *  Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
+ *          Mengdong Lin <mengdong.lin@intel.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/soc-acpi.h>
+#include "../../codecs/rt5670.h"
+#include "../atom/sst-atom-controls.h"
+#include "../common/soc-intel-quirks.h"
+
+
+/* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */
+#define CHT_PLAT_CLK_3_HZ	19200000
+#define CHT_CODEC_DAI	"rt5670-aif1"
+
+struct cht_mc_private {
+	struct snd_soc_jack headset;
+	char codec_name[SND_ACPI_I2C_ID_LEN];
+	struct clk *mclk;
+	bool use_ssp0;
+};
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin cht_bsw_headset_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct snd_soc_dai *codec_dai;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI);
+	if (!codec_dai) {
+		dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
+		return -EIO;
+	}
+
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		if (ctx->mclk) {
+			ret = clk_prepare_enable(ctx->mclk);
+			if (ret < 0) {
+				dev_err(card->dev,
+					"could not configure MCLK state");
+				return ret;
+			}
+		}
+
+		/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK,
+				CHT_PLAT_CLK_3_HZ, 48000 * 512);
+		if (ret < 0) {
+			dev_err(card->dev, "can't set codec pll: %d\n", ret);
+			return ret;
+		}
+
+		/* set codec sysclk source to PLL */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1,
+			48000 * 512, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+			return ret;
+		}
+	} else {
+		/* Set codec sysclk source to its internal clock because codec
+		 * PLL will be off when idle and MCLK will also be off by ACPI
+		 * when codec is runtime suspended. Codec needs clock for jack
+		 * detection and button press.
+		 */
+		snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_RCCLK,
+				       48000 * 512, SND_SOC_CLOCK_IN);
+
+		if (ctx->mclk)
+			clk_disable_unprepare(ctx->mclk);
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Int Mic", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+			SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route cht_audio_map[] = {
+	{"IN1P", NULL, "Headset Mic"},
+	{"IN1N", NULL, "Headset Mic"},
+	{"DMIC L1", NULL, "Int Mic"},
+	{"DMIC R1", NULL, "Int Mic"},
+	{"Headphone", NULL, "HPOL"},
+	{"Headphone", NULL, "HPOR"},
+	{"Ext Spk", NULL, "SPOLP"},
+	{"Ext Spk", NULL, "SPOLN"},
+	{"Ext Spk", NULL, "SPORP"},
+	{"Ext Spk", NULL, "SPORN"},
+	{"Headphone", NULL, "Platform Clock"},
+	{"Headset Mic", NULL, "Platform Clock"},
+	{"Int Mic", NULL, "Platform Clock"},
+	{"Ext Spk", NULL, "Platform Clock"},
+};
+
+static const struct snd_soc_dapm_route cht_audio_ssp0_map[] = {
+	{"AIF1 Playback", NULL, "ssp0 Tx"},
+	{"ssp0 Tx", NULL, "modem_out"},
+	{"modem_in", NULL, "ssp0 Rx"},
+	{"ssp0 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route cht_audio_ssp2_map[] = {
+	{"AIF1 Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx"},
+	{"codec_in1", NULL, "ssp2 Rx"},
+	{"ssp2 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_kcontrol_new cht_mc_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Int Mic"),
+	SOC_DAPM_PIN_SWITCH("Ext Spk"),
+};
+
+static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK,
+				  CHT_PLAT_CLK_3_HZ, params_rate(params) * 512);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
+	/* set codec sysclk source to PLL */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1,
+				     params_rate(params) * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct acpi_gpio_params headset_gpios = { 0, 0, false };
+
+static const struct acpi_gpio_mapping cht_rt5672_gpios[] = {
+	{ "headset-gpios", &headset_gpios, 1 },
+	{},
+};
+
+static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
+{
+	int ret;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0);
+	struct snd_soc_component *component = codec_dai->component;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
+
+	if (devm_acpi_dev_add_driver_gpios(component->dev, cht_rt5672_gpios))
+		dev_warn(runtime->dev, "Unable to add GPIO mapping table\n");
+
+	/* Select codec ASRC clock source to track I2S1 clock, because codec
+	 * is in slave mode and 100fs I2S format (BCLK = 100 * LRCLK) cannot
+	 * be supported by RT5672. Otherwise, ASRC will be disabled and cause
+	 * noise.
+	 */
+	rt5670_sel_asrc_clk_src(component,
+				RT5670_DA_STEREO_FILTER
+				| RT5670_DA_MONO_L_FILTER
+				| RT5670_DA_MONO_R_FILTER
+				| RT5670_AD_STEREO_FILTER
+				| RT5670_AD_MONO_L_FILTER
+				| RT5670_AD_MONO_R_FILTER,
+				RT5670_CLK_SEL_I2S1_ASRC);
+
+	if (ctx->use_ssp0) {
+		ret = snd_soc_dapm_add_routes(&runtime->card->dapm,
+					      cht_audio_ssp0_map,
+					      ARRAY_SIZE(cht_audio_ssp0_map));
+	} else {
+		ret = snd_soc_dapm_add_routes(&runtime->card->dapm,
+					      cht_audio_ssp2_map,
+					      ARRAY_SIZE(cht_audio_ssp2_map));
+	}
+	if (ret)
+		return ret;
+
+	ret = snd_soc_card_jack_new_pins(runtime->card, "Headset",
+					 SND_JACK_HEADSET | SND_JACK_BTN_0 |
+					 SND_JACK_BTN_1 | SND_JACK_BTN_2,
+					 &ctx->headset,
+					 cht_bsw_headset_pins,
+					 ARRAY_SIZE(cht_bsw_headset_pins));
+        if (ret)
+                return ret;
+
+	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
+	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
+
+	rt5670_set_jack_detect(component, &ctx->headset);
+	if (ctx->mclk) {
+		/*
+		 * The firmware might enable the clock at
+		 * boot (this information may or may not
+		 * be reflected in the enable clock register).
+		 * To change the rate we must disable the clock
+		 * first to cover these cases. Due to common
+		 * clock framework restrictions that do not allow
+		 * to disable a clock that has not been enabled,
+		 * we need to enable the clock first.
+		 */
+		ret = clk_prepare_enable(ctx->mclk);
+		if (!ret)
+			clk_disable_unprepare(ctx->mclk);
+
+		ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+		if (ret) {
+			dev_err(runtime->dev, "unable to set MCLK rate\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hw_params *params)
+{
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+						SNDRV_PCM_HW_PARAM_CHANNELS);
+	int ret, bits;
+
+	/* The DSP will convert the FE rate to 48k, stereo, 24bits */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	if (ctx->use_ssp0) {
+		/* set SSP0 to 16-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+		bits = 16;
+	} else {
+		/* set SSP2 to 24-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+		bits = 24;
+	}
+
+	/*
+	 * The default mode for the cpu-dai is TDM 4 slot. The default mode
+	 * for the codec-dai is I2S. So we need to either set the cpu-dai to
+	 * I2S mode to match the codec-dai, or set the codec-dai to TDM 4 slot
+	 * (or program both to yet another mode).
+	 * One board, the Lenovo Miix 2 10, uses not 1 but 2 codecs connected
+	 * to SSP2. The second piggy-backed, output-only codec is inside the
+	 * keyboard-dock (which has extra speakers). Unlike the main rt5672
+	 * codec, we cannot configure this codec, it is hard coded to use
+	 * 2 channel 24 bit I2S. For this to work we must use I2S mode on this
+	 * board. Since we only support 2 channels anyways, there is no need
+	 * for TDM on any cht-bsw-rt5672 designs. So we use I2S 2ch everywhere.
+	 */
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
+				  SND_SOC_DAIFMT_I2S     |
+				  SND_SOC_DAIFMT_NB_NF   |
+				  SND_SOC_DAIFMT_BP_FP);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cht_aif1_startup(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_hw_constraint_single(substream->runtime,
+			SNDRV_PCM_HW_PARAM_RATE, 48000);
+}
+
+static const struct snd_soc_ops cht_aif1_ops = {
+	.startup = cht_aif1_startup,
+};
+
+static const struct snd_soc_ops cht_be_ssp2_ops = {
+	.hw_params = cht_aif1_hw_params,
+};
+
+SND_SOC_DAILINK_DEF(dummy,
+	DAILINK_COMP_ARRAY(COMP_DUMMY()));
+
+SND_SOC_DAILINK_DEF(media,
+	DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
+
+SND_SOC_DAILINK_DEF(deepbuffer,
+	DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
+
+SND_SOC_DAILINK_DEF(ssp2_port,
+	DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
+SND_SOC_DAILINK_DEF(ssp2_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5670:00",
+				      "rt5670-aif1")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
+
+static struct snd_soc_dai_link cht_dailink[] = {
+	/* Front End DAI links */
+	[MERR_DPCM_AUDIO] = {
+		.name = "Audio Port",
+		.stream_name = "Audio",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &cht_aif1_ops,
+		SND_SOC_DAILINK_REG(media, dummy, platform),
+	},
+	[MERR_DPCM_DEEP_BUFFER] = {
+		.name = "Deep-Buffer Audio Port",
+		.stream_name = "Deep-Buffer Audio",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.ops = &cht_aif1_ops,
+		SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
+	},
+
+	/* Back End DAI links */
+	{
+		/* SSP2 - Codec */
+		.name = "SSP2-Codec",
+		.id = 0,
+		.no_pcm = 1,
+		.init = cht_codec_init,
+		.be_hw_params_fixup = cht_codec_fixup,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &cht_be_ssp2_ops,
+		SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
+	},
+};
+
+static int cht_suspend_pre(struct snd_soc_card *card)
+{
+	struct snd_soc_component *component;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+
+	for_each_card_components(card, component) {
+		if (!strncmp(component->name,
+			     ctx->codec_name, sizeof(ctx->codec_name))) {
+
+			dev_dbg(component->dev, "disabling jack detect before going to suspend.\n");
+			rt5670_jack_suspend(component);
+			break;
+		}
+	}
+	return 0;
+}
+
+static int cht_resume_post(struct snd_soc_card *card)
+{
+	struct snd_soc_component *component;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+
+	for_each_card_components(card, component) {
+		if (!strncmp(component->name,
+			     ctx->codec_name, sizeof(ctx->codec_name))) {
+
+			dev_dbg(component->dev, "enabling jack detect for resume.\n");
+			rt5670_jack_resume(component);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/* use space before codec name to simplify card ID, and simplify driver name */
+#define SOF_CARD_NAME "bytcht rt5672" /* card name will be 'sof-bytcht rt5672' */
+#define SOF_DRIVER_NAME "SOF"
+
+#define CARD_NAME "cht-bsw-rt5672"
+#define DRIVER_NAME NULL /* card name will be used for driver name */
+
+/* SoC card */
+static struct snd_soc_card snd_soc_card_cht = {
+	.owner = THIS_MODULE,
+	.dai_link = cht_dailink,
+	.num_links = ARRAY_SIZE(cht_dailink),
+	.dapm_widgets = cht_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets),
+	.dapm_routes = cht_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(cht_audio_map),
+	.controls = cht_mc_controls,
+	.num_controls = ARRAY_SIZE(cht_mc_controls),
+	.suspend_pre = cht_suspend_pre,
+	.resume_post = cht_resume_post,
+};
+
+#define RT5672_I2C_DEFAULT	"i2c-10EC5670:00"
+
+static int snd_cht_mc_probe(struct platform_device *pdev)
+{
+	int ret_val = 0;
+	struct cht_mc_private *drv;
+	struct snd_soc_acpi_mach *mach = pdev->dev.platform_data;
+	const char *platform_name;
+	struct acpi_device *adev;
+	bool sof_parent;
+	int dai_index = 0;
+	int i;
+
+	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	strcpy(drv->codec_name, RT5672_I2C_DEFAULT);
+
+	/* find index of codec dai */
+	for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) {
+		if (!strcmp(cht_dailink[i].codecs->name, RT5672_I2C_DEFAULT)) {
+			dai_index = i;
+			break;
+		}
+	}
+
+	/* fixup codec name based on HID */
+	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
+	if (adev) {
+		snprintf(drv->codec_name, sizeof(drv->codec_name),
+			 "i2c-%s", acpi_dev_name(adev));
+		put_device(&adev->dev);
+		cht_dailink[dai_index].codecs->name = drv->codec_name;
+	}
+
+	/* Use SSP0 on Bay Trail CR devices */
+	if (soc_intel_is_byt() && mach->mach_params.acpi_ipc_irq_index == 0) {
+		cht_dailink[dai_index].cpus->dai_name = "ssp0-port";
+		drv->use_ssp0 = true;
+	}
+
+	/* override platform name, if required */
+	snd_soc_card_cht.dev = &pdev->dev;
+	platform_name = mach->mach_params.platform;
+
+	ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht,
+							platform_name);
+	if (ret_val)
+		return ret_val;
+
+	snd_soc_card_cht.components = rt5670_components();
+
+	drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+	if (IS_ERR(drv->mclk)) {
+		dev_err(&pdev->dev,
+			"Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+			PTR_ERR(drv->mclk));
+		return PTR_ERR(drv->mclk);
+	}
+	snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
+
+	sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
+
+	/* set card and driver name */
+	if (sof_parent) {
+		snd_soc_card_cht.name = SOF_CARD_NAME;
+		snd_soc_card_cht.driver_name = SOF_DRIVER_NAME;
+	} else {
+		snd_soc_card_cht.name = CARD_NAME;
+		snd_soc_card_cht.driver_name = DRIVER_NAME;
+	}
+
+	/* set pm ops */
+	if (sof_parent)
+		pdev->dev.driver->pm = &snd_soc_pm_ops;
+
+	/* register the soc card */
+	ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);
+	if (ret_val) {
+		dev_err(&pdev->dev,
+			"snd_soc_register_card failed %d\n", ret_val);
+		return ret_val;
+	}
+	platform_set_drvdata(pdev, &snd_soc_card_cht);
+	return ret_val;
+}
+
+static struct platform_driver snd_cht_mc_driver = {
+	.driver = {
+		.name = "cht-bsw-rt5672",
+	},
+	.probe = snd_cht_mc_probe,
+};
+
+module_platform_driver(snd_cht_mc_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
+MODULE_AUTHOR("Subhransu S. Prusty, Mengdong Lin");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cht-bsw-rt5672");