Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/sound/soc/intel/catpt/registers.h b/sound/soc/intel/catpt/registers.h
new file mode 100644
index 000000000..47280d828
--- /dev/null
+++ b/sound/soc/intel/catpt/registers.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SND_SOC_INTEL_CATPT_REGS_H
+#define __SND_SOC_INTEL_CATPT_REGS_H
+
+#include <linux/bitops.h>
+#include <linux/iopoll.h>
+#include <uapi/linux/pci_regs.h>
+
+#define CATPT_SHIM_REGS_SIZE	4096
+#define CATPT_DMA_REGS_SIZE	1024
+#define CATPT_DMA_COUNT		2
+#define CATPT_SSP_REGS_SIZE	512
+
+/* DSP Shim registers */
+
+#define CATPT_SHIM_CS1		0x00
+#define CATPT_SHIM_ISC		0x18
+#define CATPT_SHIM_ISD		0x20
+#define CATPT_SHIM_IMC		0x28
+#define CATPT_SHIM_IMD		0x30
+#define CATPT_SHIM_IPCC		0x38
+#define CATPT_SHIM_IPCD		0x40
+#define CATPT_SHIM_CLKCTL	0x78
+#define CATPT_SHIM_CS2		0x80
+#define CATPT_SHIM_LTRC		0xE0
+#define CATPT_SHIM_HMDC		0xE8
+
+#define CATPT_CS_LPCS		BIT(31)
+#define CATPT_CS_SFCR(ssp)	BIT(27 + (ssp))
+#define CATPT_CS_S1IOCS		BIT(23)
+#define CATPT_CS_S0IOCS		BIT(21)
+#define CATPT_CS_PCE		BIT(15)
+#define CATPT_CS_SDPM(ssp)	BIT(11 + (ssp))
+#define CATPT_CS_STALL		BIT(10)
+#define CATPT_CS_DCS		GENMASK(6, 4)
+/* b100 DSP core & audio fabric high clock */
+#define CATPT_CS_DCS_HIGH	(0x4 << 4)
+#define CATPT_CS_SBCS(ssp)	BIT(2 + (ssp))
+#define CATPT_CS_RST		BIT(1)
+
+#define CATPT_ISC_IPCDB		BIT(1)
+#define CATPT_ISC_IPCCD		BIT(0)
+#define CATPT_ISD_DCPWM		BIT(31)
+#define CATPT_ISD_IPCCB		BIT(1)
+#define CATPT_ISD_IPCDD		BIT(0)
+
+#define CATPT_IMC_IPCDB		BIT(1)
+#define CATPT_IMC_IPCCD		BIT(0)
+#define CATPT_IMD_IPCCB		BIT(1)
+#define CATPT_IMD_IPCDD		BIT(0)
+
+#define CATPT_IPCC_BUSY		BIT(31)
+#define CATPT_IPCC_DONE		BIT(30)
+#define CATPT_IPCD_BUSY		BIT(31)
+#define CATPT_IPCD_DONE		BIT(30)
+
+#define CATPT_CLKCTL_CFCIP	BIT(31)
+#define CATPT_CLKCTL_SMOS	GENMASK(25, 24)
+
+#define CATPT_HMDC_HDDA(e, ch)	BIT(8 * (e) + (ch))
+
+/* defaults to reset SHIM registers to after each power cycle */
+#define CATPT_CS_DEFAULT	0x8480040E
+#define CATPT_ISC_DEFAULT	0x0
+#define CATPT_ISD_DEFAULT	0x0
+#define CATPT_IMC_DEFAULT	0x7FFF0003
+#define CATPT_IMD_DEFAULT	0x7FFF0003
+#define CATPT_IPCC_DEFAULT	0x0
+#define CATPT_IPCD_DEFAULT	0x0
+#define CATPT_CLKCTL_DEFAULT	0x7FF
+#define CATPT_CS2_DEFAULT	0x0
+#define CATPT_LTRC_DEFAULT	0x0
+#define CATPT_HMDC_DEFAULT	0x0
+
+/* PCI Configuration registers */
+
+#define CATPT_PCI_PMCAPID	0x80
+#define CATPT_PCI_PMCS		(CATPT_PCI_PMCAPID + PCI_PM_CTRL)
+#define CATPT_PCI_VDRTCTL0	0xA0
+#define CATPT_PCI_VDRTCTL2	0xA8
+
+#define CATPT_VDRTCTL2_DTCGE	BIT(10)
+#define CATPT_VDRTCTL2_DCLCGE	BIT(1)
+#define CATPT_VDRTCTL2_CGEALL	0xF7F
+
+/* LPT PCI Configuration bits */
+
+#define LPT_VDRTCTL0_DSRAMPGE(b)	BIT(16 + (b))
+#define LPT_VDRTCTL0_DSRAMPGE_MASK	GENMASK(31, 16)
+#define LPT_VDRTCTL0_ISRAMPGE(b)	BIT(6 + (b))
+#define LPT_VDRTCTL0_ISRAMPGE_MASK	GENMASK(15, 6)
+#define LPT_VDRTCTL0_D3SRAMPGD		BIT(2)
+#define LPT_VDRTCTL0_D3PGD		BIT(1)
+#define LPT_VDRTCTL0_APLLSE		BIT(0)
+
+/* WPT PCI Configuration bits */
+
+#define WPT_VDRTCTL0_DSRAMPGE(b)	BIT(12 + (b))
+#define WPT_VDRTCTL0_DSRAMPGE_MASK	GENMASK(31, 12)
+#define WPT_VDRTCTL0_ISRAMPGE(b)	BIT(2 + (b))
+#define WPT_VDRTCTL0_ISRAMPGE_MASK	GENMASK(11, 2)
+#define WPT_VDRTCTL0_D3SRAMPGD		BIT(1)
+#define WPT_VDRTCTL0_D3PGD		BIT(0)
+
+#define WPT_VDRTCTL2_APLLSE		BIT(31)
+
+/* defaults to reset SSP registers to after each power cycle */
+#define CATPT_SSC0_DEFAULT		0x0
+#define CATPT_SSC1_DEFAULT		0x0
+#define CATPT_SSS_DEFAULT		0xF004
+#define CATPT_SSIT_DEFAULT		0x0
+#define CATPT_SSD_DEFAULT		0xC43893A3
+#define CATPT_SSTO_DEFAULT		0x0
+#define CATPT_SSPSP_DEFAULT		0x0
+#define CATPT_SSTSA_DEFAULT		0x0
+#define CATPT_SSRSA_DEFAULT		0x0
+#define CATPT_SSTSS_DEFAULT		0x0
+#define CATPT_SSCR2_DEFAULT		0x0
+#define CATPT_SSPSP2_DEFAULT		0x0
+
+/* Physically the same block, access address differs between host and dsp */
+#define CATPT_DSP_DRAM_OFFSET		0x400000
+#define catpt_to_host_offset(offset)	((offset) & ~(CATPT_DSP_DRAM_OFFSET))
+#define catpt_to_dsp_offset(offset)	((offset) | CATPT_DSP_DRAM_OFFSET)
+
+#define CATPT_MEMBLOCK_SIZE	0x8000
+#define catpt_num_dram(cdev)	(hweight_long((cdev)->spec->dram_mask))
+#define catpt_num_iram(cdev)	(hweight_long((cdev)->spec->iram_mask))
+#define catpt_dram_size(cdev)	(catpt_num_dram(cdev) * CATPT_MEMBLOCK_SIZE)
+#define catpt_iram_size(cdev)	(catpt_num_iram(cdev) * CATPT_MEMBLOCK_SIZE)
+
+/* registry I/O helpers */
+
+#define catpt_shim_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->spec->host_shim_offset)
+#define catpt_dma_addr(cdev, dma) \
+	((cdev)->lpe_ba + (cdev)->spec->host_dma_offset[dma])
+#define catpt_ssp_addr(cdev, ssp) \
+	((cdev)->lpe_ba + (cdev)->spec->host_ssp_offset[ssp])
+#define catpt_inbox_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->ipc.config.inbox_offset)
+#define catpt_outbox_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->ipc.config.outbox_offset)
+
+#define catpt_writel_ssp(cdev, ssp, reg, val) \
+	writel(val, catpt_ssp_addr(cdev, ssp) + (reg))
+
+#define catpt_readl_shim(cdev, reg) \
+	readl(catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_writel_shim(cdev, reg, val) \
+	writel(val, catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_updatel_shim(cdev, reg, mask, val) \
+	catpt_writel_shim(cdev, reg, \
+			  (catpt_readl_shim(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_shim(cdev, reg, val, cond, delay_us, timeout_us) \
+	readl_poll_timeout(catpt_shim_addr(cdev) + CATPT_SHIM_##reg, \
+			   val, cond, delay_us, timeout_us)
+
+#define catpt_readl_pci(cdev, reg) \
+	readl(cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_writel_pci(cdev, reg, val) \
+	writel(val, cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_updatel_pci(cdev, reg, mask, val) \
+	catpt_writel_pci(cdev, reg, \
+			 (catpt_readl_pci(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_pci(cdev, reg, val, cond, delay_us, timeout_us) \
+	readl_poll_timeout((cdev)->pci_ba + CATPT_PCI_##reg, \
+			   val, cond, delay_us, timeout_us)
+
+#endif