Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 236 insertions, 0 deletions

diff --git a/sound/soc/sof/sof-client-probes-ipc3.c b/sound/soc/sof/sof-client-probes-ipc3.c
new file mode 100644
index 000000000..ef768db5f
--- /dev/null
+++ b/sound/soc/sof/sof-client-probes-ipc3.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2019-2022 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+// Code moved to this file by:
+//  Jyri Sarha <jyri.sarha@intel.com>
+//
+
+#include <linux/stddef.h>
+#include <sound/soc.h>
+#include <sound/sof/header.h>
+#include "sof-client.h"
+#include "sof-client-probes.h"
+
+struct sof_probe_dma {
+	unsigned int stream_tag;
+	unsigned int dma_buffer_size;
+} __packed;
+
+struct sof_ipc_probe_dma_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_dma dma[];
+} __packed;
+
+struct sof_ipc_probe_info_params {
+	struct sof_ipc_reply rhdr;
+	unsigned int num_elems;
+	union {
+		DECLARE_FLEX_ARRAY(struct sof_probe_dma, dma);
+		DECLARE_FLEX_ARRAY(struct sof_probe_point_desc, desc);
+	};
+} __packed;
+
+struct sof_ipc_probe_point_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_point_desc desc[];
+} __packed;
+
+struct sof_ipc_probe_point_remove_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	unsigned int buffer_id[];
+} __packed;
+
+/**
+ * ipc3_probes_init - initialize data probing
+ * @cdev:		SOF client device
+ * @stream_tag:		Extractor stream tag
+ * @buffer_size:	DMA buffer size to set for extractor
+ *
+ * Host chooses whether extraction is supported or not by providing
+ * valid stream tag to DSP. Once specified, stream described by that
+ * tag will be tied to DSP for extraction for the entire lifetime of
+ * probe.
+ *
+ * Probing is initialized only once and each INIT request must be
+ * matched by DEINIT call.
+ */
+static int ipc3_probes_init(struct sof_client_dev *cdev, u32 stream_tag,
+			    size_t buffer_size)
+{
+	struct sof_ipc_probe_dma_add_params *msg;
+	size_t size = struct_size(msg, dma, 1);
+	struct sof_ipc_reply reply;
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_INIT;
+	msg->num_elems = 1;
+	msg->dma[0].stream_tag = stream_tag;
+	msg->dma[0].dma_buffer_size = buffer_size;
+
+	ret = sof_client_ipc_tx_message(cdev, msg, &reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * ipc3_probes_deinit - cleanup after data probing
+ * @cdev:		SOF client device
+ *
+ * Host sends DEINIT request to free previously initialized probe
+ * on DSP side once it is no longer needed. DEINIT only when there
+ * are no probes connected and with all injectors detached.
+ */
+static int ipc3_probes_deinit(struct sof_client_dev *cdev)
+{
+	struct sof_ipc_cmd_hdr msg;
+	struct sof_ipc_reply reply;
+
+	msg.size = sizeof(msg);
+	msg.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_DEINIT;
+
+	return sof_client_ipc_tx_message(cdev, &msg, &reply, sizeof(reply));
+}
+
+static int ipc3_probes_info(struct sof_client_dev *cdev, unsigned int cmd,
+			    void **params, size_t *num_params)
+{
+	size_t max_msg_size = sof_client_get_ipc_max_payload_size(cdev);
+	struct sof_ipc_probe_info_params msg = {{{0}}};
+	struct sof_ipc_probe_info_params *reply;
+	size_t bytes;
+	int ret;
+
+	*params = NULL;
+	*num_params = 0;
+
+	reply = kzalloc(max_msg_size, GFP_KERNEL);
+	if (!reply)
+		return -ENOMEM;
+	msg.rhdr.hdr.size = sizeof(msg);
+	msg.rhdr.hdr.cmd = SOF_IPC_GLB_PROBE | cmd;
+
+	ret = sof_client_ipc_tx_message(cdev, &msg, reply, max_msg_size);
+	if (ret < 0 || reply->rhdr.error < 0)
+		goto exit;
+
+	if (!reply->num_elems)
+		goto exit;
+
+	if (cmd == SOF_IPC_PROBE_DMA_INFO)
+		bytes = sizeof(reply->dma[0]);
+	else
+		bytes = sizeof(reply->desc[0]);
+	bytes *= reply->num_elems;
+	*params = kmemdup(&reply->dma[0], bytes, GFP_KERNEL);
+	if (!*params) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	*num_params = reply->num_elems;
+
+exit:
+	kfree(reply);
+	return ret;
+}
+
+/**
+ * ipc3_probes_points_info - retrieve list of active probe points
+ * @cdev:		SOF client device
+ * @desc:	Returned list of active probes
+ * @num_desc:	Returned count of active probes
+ *
+ * Host sends PROBE_POINT_INFO request to obtain list of active probe
+ * points, valid for disconnection when given probe is no longer
+ * required.
+ */
+static int ipc3_probes_points_info(struct sof_client_dev *cdev,
+				   struct sof_probe_point_desc **desc,
+				   size_t *num_desc)
+{
+	return ipc3_probes_info(cdev, SOF_IPC_PROBE_POINT_INFO,
+			       (void **)desc, num_desc);
+}
+
+/**
+ * ipc3_probes_points_add - connect specified probes
+ * @cdev:		SOF client device
+ * @desc:	List of probe points to connect
+ * @num_desc:	Number of elements in @desc
+ *
+ * Dynamically connects to provided set of endpoints. Immediately
+ * after connection is established, host must be prepared to
+ * transfer data from or to target stream given the probing purpose.
+ *
+ * Each probe point should be removed using PROBE_POINT_REMOVE
+ * request when no longer needed.
+ */
+static int ipc3_probes_points_add(struct sof_client_dev *cdev,
+				  struct sof_probe_point_desc *desc,
+				  size_t num_desc)
+{
+	struct sof_ipc_probe_point_add_params *msg;
+	size_t size = struct_size(msg, desc, num_desc);
+	struct sof_ipc_reply reply;
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_desc;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_ADD;
+	memcpy(&msg->desc[0], desc, size - sizeof(*msg));
+
+	ret = sof_client_ipc_tx_message(cdev, msg, &reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * ipc3_probes_points_remove - disconnect specified probes
+ * @cdev:		SOF client device
+ * @buffer_id:		List of probe points to disconnect
+ * @num_buffer_id:	Number of elements in @desc
+ *
+ * Removes previously connected probes from list of active probe
+ * points and frees all resources on DSP side.
+ */
+static int ipc3_probes_points_remove(struct sof_client_dev *cdev,
+				     unsigned int *buffer_id,
+				     size_t num_buffer_id)
+{
+	struct sof_ipc_probe_point_remove_params *msg;
+	size_t size = struct_size(msg, buffer_id, num_buffer_id);
+	struct sof_ipc_reply reply;
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_buffer_id;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_REMOVE;
+	memcpy(&msg->buffer_id[0], buffer_id, size - sizeof(*msg));
+
+	ret = sof_client_ipc_tx_message(cdev, msg, &reply, sizeof(reply));
+	kfree(msg);
+	return ret;
+}
+
+const struct sof_probes_ipc_ops ipc3_probe_ops =  {
+	.init = ipc3_probes_init,
+	.deinit = ipc3_probes_deinit,
+	.points_info = ipc3_probes_points_info,
+	.points_add = ipc3_probes_points_add,
+	.points_remove = ipc3_probes_points_remove,
+};