Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 617 insertions, 0 deletions

diff --git a/sound/usb/6fire/control.c b/sound/usb/6fire/control.c
new file mode 100644
index 000000000..9bd8dcbb6
--- /dev/null
+++ b/sound/usb/6fire/control.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Mixer control
+ *
+ * Author:	Torsten Schenk <torsten.schenk@zoho.com>
+ * Created:	Jan 01, 2011
+ * Copyright:	(C) Torsten Schenk
+ *
+ * Thanks to:
+ * - Holger Ruckdeschel: he found out how to control individual channel
+ *   volumes and introduced mute switch
+ */
+
+#include <linux/interrupt.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+
+#include "control.h"
+#include "comm.h"
+#include "chip.h"
+
+static const char * const opt_coax_texts[2] = { "Optical", "Coax" };
+static const char * const line_phono_texts[2] = { "Line", "Phono" };
+
+/*
+ * data that needs to be sent to device. sets up card internal stuff.
+ * values dumped from windows driver and filtered by trial'n'error.
+ */
+static const struct {
+	u8 type;
+	u8 reg;
+	u8 value;
+}
+init_data[] = {
+	{ 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 },
+	{ 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 },
+	{ 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 },
+	{ 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 },
+	{ 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 },
+	{ 0x12, 0x0d, 0x38 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 },
+	{ 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 },
+	{ 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 },
+	{ 0 } /* TERMINATING ENTRY */
+};
+
+static const int rates_altsetting[] = { 1, 1, 2, 2, 3, 3 };
+/* values to write to soundcard register for all samplerates */
+static const u16 rates_6fire_vl[] = {0x00, 0x01, 0x00, 0x01, 0x00, 0x01};
+static const u16 rates_6fire_vh[] = {0x11, 0x11, 0x10, 0x10, 0x00, 0x00};
+
+static DECLARE_TLV_DB_MINMAX(tlv_output, -9000, 0);
+static DECLARE_TLV_DB_MINMAX(tlv_input, -1500, 1500);
+
+enum {
+	DIGITAL_THRU_ONLY_SAMPLERATE = 3
+};
+
+static void usb6fire_control_output_vol_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	int i;
+
+	if (comm_rt)
+		for (i = 0; i < 6; i++)
+			if (!(rt->ovol_updated & (1 << i))) {
+				comm_rt->write8(comm_rt, 0x12, 0x0f + i,
+					180 - rt->output_vol[i]);
+				rt->ovol_updated |= 1 << i;
+			}
+}
+
+static void usb6fire_control_output_mute_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+
+	if (comm_rt)
+		comm_rt->write8(comm_rt, 0x12, 0x0e, ~rt->output_mute);
+}
+
+static void usb6fire_control_input_vol_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	int i;
+
+	if (comm_rt)
+		for (i = 0; i < 2; i++)
+			if (!(rt->ivol_updated & (1 << i))) {
+				comm_rt->write8(comm_rt, 0x12, 0x1c + i,
+					rt->input_vol[i] & 0x3f);
+				rt->ivol_updated |= 1 << i;
+			}
+}
+
+static void usb6fire_control_line_phono_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	if (comm_rt) {
+		comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch);
+		comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch);
+	}
+}
+
+static void usb6fire_control_opt_coax_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+	if (comm_rt) {
+		comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch);
+		comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch);
+	}
+}
+
+static int usb6fire_control_set_rate(struct control_runtime *rt, int rate)
+{
+	int ret;
+	struct usb_device *device = rt->chip->dev;
+	struct comm_runtime *comm_rt = rt->chip->comm;
+
+	if (rate < 0 || rate >= CONTROL_N_RATES)
+		return -EINVAL;
+
+	ret = usb_set_interface(device, 1, rates_altsetting[rate]);
+	if (ret < 0)
+		return ret;
+
+	/* set soundcard clock */
+	ret = comm_rt->write16(comm_rt, 0x02, 0x01, rates_6fire_vl[rate],
+			rates_6fire_vh[rate]);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int usb6fire_control_set_channels(
+	struct control_runtime *rt, int n_analog_out,
+	int n_analog_in, bool spdif_out, bool spdif_in)
+{
+	int ret;
+	struct comm_runtime *comm_rt = rt->chip->comm;
+
+	/* enable analog inputs and outputs
+	 * (one bit per stereo-channel) */
+	ret = comm_rt->write16(comm_rt, 0x02, 0x02,
+			(1 << (n_analog_out / 2)) - 1,
+			(1 << (n_analog_in / 2)) - 1);
+	if (ret < 0)
+		return ret;
+
+	/* disable digital inputs and outputs */
+	/* TODO: use spdif_x to enable/disable digital channels */
+	ret = comm_rt->write16(comm_rt, 0x02, 0x03, 0x00, 0x00);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int usb6fire_control_streaming_update(struct control_runtime *rt)
+{
+	struct comm_runtime *comm_rt = rt->chip->comm;
+
+	if (comm_rt) {
+		if (!rt->usb_streaming && rt->digital_thru_switch)
+			usb6fire_control_set_rate(rt,
+				DIGITAL_THRU_ONLY_SAMPLERATE);
+		return comm_rt->write16(comm_rt, 0x02, 0x00, 0x00,
+			(rt->usb_streaming ? 0x01 : 0x00) |
+			(rt->digital_thru_switch ? 0x08 : 0x00));
+	}
+	return -EINVAL;
+}
+
+static int usb6fire_control_output_vol_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 180;
+	return 0;
+}
+
+static int usb6fire_control_output_vol_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	unsigned int ch = kcontrol->private_value;
+	int changed = 0;
+
+	if (ch > 4) {
+		dev_err(&rt->chip->dev->dev,
+			"Invalid channel in volume control.");
+		return -EINVAL;
+	}
+
+	if (rt->output_vol[ch] != ucontrol->value.integer.value[0]) {
+		rt->output_vol[ch] = ucontrol->value.integer.value[0];
+		rt->ovol_updated &= ~(1 << ch);
+		changed = 1;
+	}
+	if (rt->output_vol[ch + 1] != ucontrol->value.integer.value[1]) {
+		rt->output_vol[ch + 1] = ucontrol->value.integer.value[1];
+		rt->ovol_updated &= ~(2 << ch);
+		changed = 1;
+	}
+
+	if (changed)
+		usb6fire_control_output_vol_update(rt);
+
+	return changed;
+}
+
+static int usb6fire_control_output_vol_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	unsigned int ch = kcontrol->private_value;
+
+	if (ch > 4) {
+		dev_err(&rt->chip->dev->dev,
+			"Invalid channel in volume control.");
+		return -EINVAL;
+	}
+
+	ucontrol->value.integer.value[0] = rt->output_vol[ch];
+	ucontrol->value.integer.value[1] = rt->output_vol[ch + 1];
+	return 0;
+}
+
+static int usb6fire_control_output_mute_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	unsigned int ch = kcontrol->private_value;
+	u8 old = rt->output_mute;
+	u8 value = 0;
+
+	if (ch > 4) {
+		dev_err(&rt->chip->dev->dev,
+			"Invalid channel in volume control.");
+		return -EINVAL;
+	}
+
+	rt->output_mute &= ~(3 << ch);
+	if (ucontrol->value.integer.value[0])
+		value |= 1;
+	if (ucontrol->value.integer.value[1])
+		value |= 2;
+	rt->output_mute |= value << ch;
+
+	if (rt->output_mute != old)
+		usb6fire_control_output_mute_update(rt);
+
+	return rt->output_mute != old;
+}
+
+static int usb6fire_control_output_mute_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	unsigned int ch = kcontrol->private_value;
+	u8 value = rt->output_mute >> ch;
+
+	if (ch > 4) {
+		dev_err(&rt->chip->dev->dev,
+			"Invalid channel in volume control.");
+		return -EINVAL;
+	}
+
+	ucontrol->value.integer.value[0] = 1 & value;
+	value >>= 1;
+	ucontrol->value.integer.value[1] = 1 & value;
+
+	return 0;
+}
+
+static int usb6fire_control_input_vol_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 30;
+	return 0;
+}
+
+static int usb6fire_control_input_vol_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+
+	if (rt->input_vol[0] != ucontrol->value.integer.value[0]) {
+		rt->input_vol[0] = ucontrol->value.integer.value[0] - 15;
+		rt->ivol_updated &= ~(1 << 0);
+		changed = 1;
+	}
+	if (rt->input_vol[1] != ucontrol->value.integer.value[1]) {
+		rt->input_vol[1] = ucontrol->value.integer.value[1] - 15;
+		rt->ivol_updated &= ~(1 << 1);
+		changed = 1;
+	}
+
+	if (changed)
+		usb6fire_control_input_vol_update(rt);
+
+	return changed;
+}
+
+static int usb6fire_control_input_vol_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = rt->input_vol[0] + 15;
+	ucontrol->value.integer.value[1] = rt->input_vol[1] + 15;
+
+	return 0;
+}
+
+static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	return snd_ctl_enum_info(uinfo, 1, 2, line_phono_texts);
+}
+
+static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	if (rt->line_phono_switch != ucontrol->value.integer.value[0]) {
+		rt->line_phono_switch = ucontrol->value.integer.value[0];
+		usb6fire_control_line_phono_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = rt->line_phono_switch;
+	return 0;
+}
+
+static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	return snd_ctl_enum_info(uinfo, 1, 2, opt_coax_texts);
+}
+
+static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+
+	if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) {
+		rt->opt_coax_switch = ucontrol->value.enumerated.item[0];
+		usb6fire_control_opt_coax_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.enumerated.item[0] = rt->opt_coax_switch;
+	return 0;
+}
+
+static int usb6fire_control_digital_thru_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+
+	if (rt->digital_thru_switch != ucontrol->value.integer.value[0]) {
+		rt->digital_thru_switch = ucontrol->value.integer.value[0];
+		usb6fire_control_streaming_update(rt);
+		changed = 1;
+	}
+	return changed;
+}
+
+static int usb6fire_control_digital_thru_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = rt->digital_thru_switch;
+	return 0;
+}
+
+static const struct snd_kcontrol_new vol_elements[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Volume",
+		.index = 0,
+		.private_value = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = usb6fire_control_output_vol_info,
+		.get = usb6fire_control_output_vol_get,
+		.put = usb6fire_control_output_vol_put,
+		.tlv = { .p = tlv_output }
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Volume",
+		.index = 1,
+		.private_value = 2,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = usb6fire_control_output_vol_info,
+		.get = usb6fire_control_output_vol_get,
+		.put = usb6fire_control_output_vol_put,
+		.tlv = { .p = tlv_output }
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Volume",
+		.index = 2,
+		.private_value = 4,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = usb6fire_control_output_vol_info,
+		.get = usb6fire_control_output_vol_get,
+		.put = usb6fire_control_output_vol_put,
+		.tlv = { .p = tlv_output }
+	},
+	{}
+};
+
+static const struct snd_kcontrol_new mute_elements[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Switch",
+		.index = 0,
+		.private_value = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_ctl_boolean_stereo_info,
+		.get = usb6fire_control_output_mute_get,
+		.put = usb6fire_control_output_mute_put,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Switch",
+		.index = 1,
+		.private_value = 2,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_ctl_boolean_stereo_info,
+		.get = usb6fire_control_output_mute_get,
+		.put = usb6fire_control_output_mute_put,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Playback Switch",
+		.index = 2,
+		.private_value = 4,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_ctl_boolean_stereo_info,
+		.get = usb6fire_control_output_mute_get,
+		.put = usb6fire_control_output_mute_put,
+	},
+	{}
+};
+
+static const struct snd_kcontrol_new elements[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Line/Phono Capture Route",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = usb6fire_control_line_phono_info,
+		.get = usb6fire_control_line_phono_get,
+		.put = usb6fire_control_line_phono_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Opt/Coax Capture Route",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = usb6fire_control_opt_coax_info,
+		.get = usb6fire_control_opt_coax_get,
+		.put = usb6fire_control_opt_coax_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Digital Thru Playback Route",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_ctl_boolean_mono_info,
+		.get = usb6fire_control_digital_thru_get,
+		.put = usb6fire_control_digital_thru_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Capture Volume",
+		.index = 0,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = usb6fire_control_input_vol_info,
+		.get = usb6fire_control_input_vol_get,
+		.put = usb6fire_control_input_vol_put,
+		.tlv = { .p = tlv_input }
+	},
+	{}
+};
+
+static int usb6fire_control_add_virtual(
+	struct control_runtime *rt,
+	struct snd_card *card,
+	char *name,
+	const struct snd_kcontrol_new *elems)
+{
+	int ret;
+	int i;
+	struct snd_kcontrol *vmaster =
+		snd_ctl_make_virtual_master(name, tlv_output);
+	struct snd_kcontrol *control;
+
+	if (!vmaster)
+		return -ENOMEM;
+	ret = snd_ctl_add(card, vmaster);
+	if (ret < 0)
+		return ret;
+
+	i = 0;
+	while (elems[i].name) {
+		control = snd_ctl_new1(&elems[i], rt);
+		if (!control)
+			return -ENOMEM;
+		ret = snd_ctl_add(card, control);
+		if (ret < 0)
+			return ret;
+		ret = snd_ctl_add_follower(vmaster, control);
+		if (ret < 0)
+			return ret;
+		i++;
+	}
+	return 0;
+}
+
+int usb6fire_control_init(struct sfire_chip *chip)
+{
+	int i;
+	int ret;
+	struct control_runtime *rt = kzalloc(sizeof(struct control_runtime),
+			GFP_KERNEL);
+	struct comm_runtime *comm_rt = chip->comm;
+
+	if (!rt)
+		return -ENOMEM;
+
+	rt->chip = chip;
+	rt->update_streaming = usb6fire_control_streaming_update;
+	rt->set_rate = usb6fire_control_set_rate;
+	rt->set_channels = usb6fire_control_set_channels;
+
+	i = 0;
+	while (init_data[i].type) {
+		comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg,
+				init_data[i].value);
+		i++;
+	}
+
+	usb6fire_control_opt_coax_update(rt);
+	usb6fire_control_line_phono_update(rt);
+	usb6fire_control_output_vol_update(rt);
+	usb6fire_control_output_mute_update(rt);
+	usb6fire_control_input_vol_update(rt);
+	usb6fire_control_streaming_update(rt);
+
+	ret = usb6fire_control_add_virtual(rt, chip->card,
+		"Master Playback Volume", vol_elements);
+	if (ret) {
+		dev_err(&chip->dev->dev, "cannot add control.\n");
+		kfree(rt);
+		return ret;
+	}
+	ret = usb6fire_control_add_virtual(rt, chip->card,
+		"Master Playback Switch", mute_elements);
+	if (ret) {
+		dev_err(&chip->dev->dev, "cannot add control.\n");
+		kfree(rt);
+		return ret;
+	}
+
+	i = 0;
+	while (elements[i].name) {
+		ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt));
+		if (ret < 0) {
+			kfree(rt);
+			dev_err(&chip->dev->dev, "cannot add control.\n");
+			return ret;
+		}
+		i++;
+	}
+
+	chip->control = rt;
+	return 0;
+}
+
+void usb6fire_control_abort(struct sfire_chip *chip)
+{}
+
+void usb6fire_control_destroy(struct sfire_chip *chip)
+{
+	kfree(chip->control);
+	chip->control = NULL;
+}