Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 295 insertions, 0 deletions

diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c
new file mode 100644
index 000000000..0838632c7
--- /dev/null
+++ b/sound/usb/line6/midi.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/export.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+
+#include "driver.h"
+#include "midi.h"
+
+#define line6_rawmidi_substream_midi(substream) \
+	((struct snd_line6_midi *)((substream)->rmidi->private_data))
+
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length);
+
+/*
+	Pass data received via USB to MIDI.
+*/
+void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
+			int length)
+{
+	if (line6->line6midi->substream_receive)
+		snd_rawmidi_receive(line6->line6midi->substream_receive,
+				    data, length);
+}
+
+/*
+	Read data from MIDI buffer and transmit them via USB.
+*/
+static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *line6midi = line6->line6midi;
+	struct midi_buffer *mb = &line6midi->midibuf_out;
+	unsigned char chunk[LINE6_FALLBACK_MAXPACKETSIZE];
+	int req, done;
+
+	for (;;) {
+		req = min3(line6_midibuf_bytes_free(mb), line6->max_packet_size,
+			   LINE6_FALLBACK_MAXPACKETSIZE);
+		done = snd_rawmidi_transmit_peek(substream, chunk, req);
+
+		if (done == 0)
+			break;
+
+		line6_midibuf_write(mb, chunk, done);
+		snd_rawmidi_transmit_ack(substream, done);
+	}
+
+	for (;;) {
+		done = line6_midibuf_read(mb, chunk,
+					  LINE6_FALLBACK_MAXPACKETSIZE,
+					  LINE6_MIDIBUF_READ_TX);
+
+		if (done == 0)
+			break;
+
+		send_midi_async(line6, chunk, done);
+	}
+}
+
+/*
+	Notification of completion of MIDI transmission.
+*/
+static void midi_sent(struct urb *urb)
+{
+	unsigned long flags;
+	int status;
+	int num;
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+
+	status = urb->status;
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
+
+	if (status == -ESHUTDOWN)
+		return;
+
+	spin_lock_irqsave(&line6->line6midi->lock, flags);
+	num = --line6->line6midi->num_active_send_urbs;
+
+	if (num == 0) {
+		line6_midi_transmit(line6->line6midi->substream_transmit);
+		num = line6->line6midi->num_active_send_urbs;
+	}
+
+	if (num == 0)
+		wake_up(&line6->line6midi->send_wait);
+
+	spin_unlock_irqrestore(&line6->line6midi->lock, flags);
+}
+
+/*
+	Send an asynchronous MIDI message.
+	Assumes that line6->line6midi->lock is held
+	(i.e., this function is serialized).
+*/
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length)
+{
+	struct urb *urb;
+	int retval;
+	unsigned char *transfer_buffer;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL)
+		return -ENOMEM;
+
+	transfer_buffer = kmemdup(data, length, GFP_ATOMIC);
+
+	if (transfer_buffer == NULL) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	usb_fill_int_urb(urb, line6->usbdev,
+			 usb_sndintpipe(line6->usbdev,
+					 line6->properties->ep_ctrl_w),
+			 transfer_buffer, length, midi_sent, line6,
+			 line6->interval);
+	urb->actual_length = 0;
+	retval = usb_urb_ep_type_check(urb);
+	if (retval < 0)
+		goto error;
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval < 0)
+		goto error;
+
+	++line6->line6midi->num_active_send_urbs;
+	return 0;
+
+ error:
+	dev_err(line6->ifcdev, "usb_submit_urb failed\n");
+	usb_free_urb(urb);
+	return retval;
+}
+
+static int line6_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream,
+				      int up)
+{
+	unsigned long flags;
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	line6->line6midi->substream_transmit = substream;
+	spin_lock_irqsave(&line6->line6midi->lock, flags);
+
+	if (line6->line6midi->num_active_send_urbs == 0)
+		line6_midi_transmit(substream);
+
+	spin_unlock_irqrestore(&line6->line6midi->lock, flags);
+}
+
+static void line6_midi_output_drain(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *midi = line6->line6midi;
+
+	wait_event_interruptible(midi->send_wait,
+				 midi->num_active_send_urbs == 0);
+}
+
+static int line6_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream,
+				     int up)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	if (up)
+		line6->line6midi->substream_receive = substream;
+	else
+		line6->line6midi->substream_receive = NULL;
+}
+
+static const struct snd_rawmidi_ops line6_midi_output_ops = {
+	.open = line6_midi_output_open,
+	.close = line6_midi_output_close,
+	.trigger = line6_midi_output_trigger,
+	.drain = line6_midi_output_drain,
+};
+
+static const struct snd_rawmidi_ops line6_midi_input_ops = {
+	.open = line6_midi_input_open,
+	.close = line6_midi_input_close,
+	.trigger = line6_midi_input_trigger,
+};
+
+/* Create a MIDI device */
+static int snd_line6_new_midi(struct usb_line6 *line6,
+			      struct snd_rawmidi **rmidi_ret)
+{
+	struct snd_rawmidi *rmidi;
+	int err;
+
+	err = snd_rawmidi_new(line6->card, "Line 6 MIDI", 0, 1, 1, rmidi_ret);
+	if (err < 0)
+		return err;
+
+	rmidi = *rmidi_ret;
+	strcpy(rmidi->id, line6->properties->id);
+	strcpy(rmidi->name, line6->properties->name);
+
+	rmidi->info_flags =
+	    SNDRV_RAWMIDI_INFO_OUTPUT |
+	    SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
+
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+			    &line6_midi_output_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+			    &line6_midi_input_ops);
+	return 0;
+}
+
+/* MIDI device destructor */
+static void snd_line6_midi_free(struct snd_rawmidi *rmidi)
+{
+	struct snd_line6_midi *line6midi = rmidi->private_data;
+
+	line6_midibuf_destroy(&line6midi->midibuf_in);
+	line6_midibuf_destroy(&line6midi->midibuf_out);
+	kfree(line6midi);
+}
+
+/*
+	Initialize the Line 6 MIDI subsystem.
+*/
+int line6_init_midi(struct usb_line6 *line6)
+{
+	int err;
+	struct snd_rawmidi *rmidi;
+	struct snd_line6_midi *line6midi;
+
+	if (!(line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)) {
+		/* skip MIDI initialization and report success */
+		return 0;
+	}
+
+	err = snd_line6_new_midi(line6, &rmidi);
+	if (err < 0)
+		return err;
+
+	line6midi = kzalloc(sizeof(struct snd_line6_midi), GFP_KERNEL);
+	if (!line6midi)
+		return -ENOMEM;
+
+	rmidi->private_data = line6midi;
+	rmidi->private_free = snd_line6_midi_free;
+
+	init_waitqueue_head(&line6midi->send_wait);
+	spin_lock_init(&line6midi->lock);
+	line6midi->line6 = line6;
+
+	err = line6_midibuf_init(&line6midi->midibuf_in, MIDI_BUFFER_SIZE, 0);
+	if (err < 0)
+		return err;
+
+	err = line6_midibuf_init(&line6midi->midibuf_out, MIDI_BUFFER_SIZE, 1);
+	if (err < 0)
+		return err;
+
+	line6->line6midi = line6midi;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_init_midi);