Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 206 insertions, 0 deletions

diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
new file mode 100644
index 000000000..f5a8dca66
--- /dev/null
+++ b/sound/usb/usbaudio.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __USBAUDIO_H
+#define __USBAUDIO_H
+/*
+ *   (Tentative) USB Audio Driver for ALSA
+ *
+ *   Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
+ */
+
+/* handling of USB vendor/product ID pairs as 32-bit numbers */
+#define USB_ID(vendor, product) (((unsigned int)(vendor) << 16) | (product))
+#define USB_ID_VENDOR(id) ((id) >> 16)
+#define USB_ID_PRODUCT(id) ((u16)(id))
+
+/*
+ *
+ */
+
+struct media_device;
+struct media_intf_devnode;
+
+#define MAX_CARD_INTERFACES	16
+
+struct snd_usb_audio {
+	int index;
+	struct usb_device *dev;
+	struct snd_card *card;
+	struct usb_interface *intf[MAX_CARD_INTERFACES];
+	u32 usb_id;
+	uint16_t quirk_type;
+	struct mutex mutex;
+	unsigned int system_suspend;
+	atomic_t active;
+	atomic_t shutdown;
+	atomic_t usage_count;
+	wait_queue_head_t shutdown_wait;
+	unsigned int quirk_flags;
+	unsigned int need_delayed_register:1; /* warn for delayed registration */
+	int num_interfaces;
+	int last_iface;
+	int num_suspended_intf;
+	int sample_rate_read_error;
+
+	int badd_profile;		/* UAC3 BADD profile */
+
+	struct list_head pcm_list;	/* list of pcm streams */
+	struct list_head ep_list;	/* list of audio-related endpoints */
+	struct list_head iface_ref_list; /* list of interface refcounts */
+	struct list_head clock_ref_list; /* list of clock refcounts */
+	int pcm_devs;
+
+	struct list_head midi_list;	/* list of midi interfaces */
+
+	struct list_head mixer_list;	/* list of mixer interfaces */
+
+	int setup;			/* from the 'device_setup' module param */
+	bool generic_implicit_fb;	/* from the 'implicit_fb' module param */
+	bool autoclock;			/* from the 'autoclock' module param */
+
+	bool lowlatency;		/* from the 'lowlatency' module param */
+	struct usb_host_interface *ctrl_intf;	/* the audio control interface */
+	struct media_device *media_dev;
+	struct media_intf_devnode *ctl_intf_media_devnode;
+};
+
+#define USB_AUDIO_IFACE_UNUSED	((void *)-1L)
+
+#define usb_audio_err(chip, fmt, args...) \
+	dev_err(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_warn(chip, fmt, args...) \
+	dev_warn(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_info(chip, fmt, args...) \
+	dev_info(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_dbg(chip, fmt, args...) \
+	dev_dbg(&(chip)->dev->dev, fmt, ##args)
+
+/*
+ * Information about devices with broken descriptors
+ */
+
+/* special values for .ifnum */
+#define QUIRK_NODEV_INTERFACE		-3	/* return -ENODEV */
+#define QUIRK_NO_INTERFACE		-2
+#define QUIRK_ANY_INTERFACE		-1
+
+enum quirk_type {
+	QUIRK_IGNORE_INTERFACE,
+	QUIRK_COMPOSITE,
+	QUIRK_AUTODETECT,
+	QUIRK_MIDI_STANDARD_INTERFACE,
+	QUIRK_MIDI_FIXED_ENDPOINT,
+	QUIRK_MIDI_YAMAHA,
+	QUIRK_MIDI_ROLAND,
+	QUIRK_MIDI_MIDIMAN,
+	QUIRK_MIDI_NOVATION,
+	QUIRK_MIDI_RAW_BYTES,
+	QUIRK_MIDI_EMAGIC,
+	QUIRK_MIDI_CME,
+	QUIRK_MIDI_AKAI,
+	QUIRK_MIDI_US122L,
+	QUIRK_MIDI_FTDI,
+	QUIRK_MIDI_CH345,
+	QUIRK_AUDIO_STANDARD_INTERFACE,
+	QUIRK_AUDIO_FIXED_ENDPOINT,
+	QUIRK_AUDIO_EDIROL_UAXX,
+	QUIRK_AUDIO_STANDARD_MIXER,
+
+	QUIRK_TYPE_COUNT
+};
+
+struct snd_usb_audio_quirk {
+	const char *vendor_name;
+	const char *product_name;
+	int16_t ifnum;
+	uint16_t type;
+	const void *data;
+};
+
+#define combine_word(s)    ((*(s)) | ((unsigned int)(s)[1] << 8))
+#define combine_triple(s)  (combine_word(s) | ((unsigned int)(s)[2] << 16))
+#define combine_quad(s)    (combine_triple(s) | ((unsigned int)(s)[3] << 24))
+
+int snd_usb_lock_shutdown(struct snd_usb_audio *chip);
+void snd_usb_unlock_shutdown(struct snd_usb_audio *chip);
+
+extern bool snd_usb_use_vmalloc;
+extern bool snd_usb_skip_validation;
+
+/*
+ * Driver behavior quirk flags, stored in chip->quirk_flags
+ *
+ * QUIRK_FLAG_GET_SAMPLE_RATE:
+ *  Skip reading sample rate for devices, as some devices behave inconsistently
+ *  or return error
+ * QUIRK_FLAG_SHARE_MEDIA_DEVICE:
+ *  Create Media Controller API entries
+ * QUIRK_FLAG_ALIGN_TRANSFER:
+ *  Allow alignment on audio sub-slot (channel samples) rather than on audio
+ *  slots (audio frames)
+ * QUIRK_TX_LENGTH:
+ *  Add length specifier to transfers
+ * QUIRK_FLAG_PLAYBACK_FIRST:
+ *  Start playback stream at first even in implement feedback mode
+ * QUIRK_FLAG_SKIP_CLOCK_SELECTOR:
+ *  Skip clock selector setup; the device may reset to invalid state
+ * QUIRK_FLAG_IGNORE_CLOCK_SOURCE:
+ *  Ignore errors from clock source search; i.e. hardcoded clock
+ * QUIRK_FLAG_ITF_USB_DSD_DAC:
+ *  Indicates the device is for ITF-USB DSD based DACs that need a vendor cmd
+ *  to switch between PCM and native DSD mode
+ * QUIRK_FLAG_CTL_MSG_DELAY:
+ *  Add a delay of 20ms at each control message handling
+ * QUIRK_FLAG_CTL_MSG_DELAY_1M:
+ *  Add a delay of 1-2ms at each control message handling
+ * QUIRK_FLAG_CTL_MSG_DELAY_5M:
+ *  Add a delay of 5-6ms at each control message handling
+ * QUIRK_FLAG_IFACE_DELAY:
+ *  Add a delay of 50ms at each interface setup
+ * QUIRK_FLAG_VALIDATE_RATES:
+ *  Perform sample rate validations at probe
+ * QUIRK_FLAG_DISABLE_AUTOSUSPEND:
+ *  Disable runtime PM autosuspend
+ * QUIRK_FLAG_IGNORE_CTL_ERROR:
+ *  Ignore errors for mixer access
+ * QUIRK_FLAG_DSD_RAW:
+ *  Support generic DSD raw U32_BE format
+ * QUIRK_FLAG_SET_IFACE_FIRST:
+ *  Set up the interface at first like UAC1
+ * QUIRK_FLAG_GENERIC_IMPLICIT_FB
+ *  Apply the generic implicit feedback sync mode (same as implicit_fb=1 option)
+ * QUIRK_FLAG_SKIP_IMPLICIT_FB
+ *  Don't apply implicit feedback sync mode
+ * QUIRK_FLAG_IFACE_SKIP_CLOSE
+ *  Don't closed interface during setting sample rate
+ * QUIRK_FLAG_FORCE_IFACE_RESET
+ *  Force an interface reset whenever stopping & restarting a stream
+ *  (e.g. after xrun)
+ * QUIRK_FLAG_FIXED_RATE
+ *  Do not set PCM rate (frequency) when only one rate is available
+ *  for the given endpoint.
+ */
+
+#define QUIRK_FLAG_GET_SAMPLE_RATE	(1U << 0)
+#define QUIRK_FLAG_SHARE_MEDIA_DEVICE	(1U << 1)
+#define QUIRK_FLAG_ALIGN_TRANSFER	(1U << 2)
+#define QUIRK_FLAG_TX_LENGTH		(1U << 3)
+#define QUIRK_FLAG_PLAYBACK_FIRST	(1U << 4)
+#define QUIRK_FLAG_SKIP_CLOCK_SELECTOR	(1U << 5)
+#define QUIRK_FLAG_IGNORE_CLOCK_SOURCE	(1U << 6)
+#define QUIRK_FLAG_ITF_USB_DSD_DAC	(1U << 7)
+#define QUIRK_FLAG_CTL_MSG_DELAY	(1U << 8)
+#define QUIRK_FLAG_CTL_MSG_DELAY_1M	(1U << 9)
+#define QUIRK_FLAG_CTL_MSG_DELAY_5M	(1U << 10)
+#define QUIRK_FLAG_IFACE_DELAY		(1U << 11)
+#define QUIRK_FLAG_VALIDATE_RATES	(1U << 12)
+#define QUIRK_FLAG_DISABLE_AUTOSUSPEND	(1U << 13)
+#define QUIRK_FLAG_IGNORE_CTL_ERROR	(1U << 14)
+#define QUIRK_FLAG_DSD_RAW		(1U << 15)
+#define QUIRK_FLAG_SET_IFACE_FIRST	(1U << 16)
+#define QUIRK_FLAG_GENERIC_IMPLICIT_FB	(1U << 17)
+#define QUIRK_FLAG_SKIP_IMPLICIT_FB	(1U << 18)
+#define QUIRK_FLAG_IFACE_SKIP_CLOSE	(1U << 19)
+#define QUIRK_FLAG_FORCE_IFACE_RESET	(1U << 20)
+#define QUIRK_FLAG_FIXED_RATE		(1U << 21)
+
+#endif /* __USBAUDIO_H */