Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/tools/Makefile b/tools/Makefile
new file mode 100644
index 000000000..e497875fc
--- /dev/null
+++ b/tools/Makefile
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0
+# Some of the tools (perf) use same make variables
+# as in kernel build.
+export srctree=
+export objtree=
+
+include scripts/Makefile.include
+
+help:
+	@echo 'Possible targets:'
+	@echo ''
+	@echo '  acpi                   - ACPI tools'
+	@echo '  bpf                    - misc BPF tools'
+	@echo '  cgroup                 - cgroup tools'
+	@echo '  counter                - counter tools'
+	@echo '  cpupower               - a tool for all things x86 CPU power'
+	@echo '  debugging              - tools for debugging'
+	@echo '  firewire               - the userspace part of nosy, an IEEE-1394 traffic sniffer'
+	@echo '  firmware               - Firmware tools'
+	@echo '  freefall               - laptop accelerometer program for disk protection'
+	@echo '  gpio                   - GPIO tools'
+	@echo '  hv                     - tools used when in Hyper-V clients'
+	@echo '  iio                    - IIO tools'
+	@echo '  intel-speed-select     - Intel Speed Select tool'
+	@echo '  kvm_stat               - top-like utility for displaying kvm statistics'
+	@echo '  leds                   - LEDs  tools'
+	@echo '  nolibc                 - nolibc headers testing and installation'
+	@echo '  objtool                - an ELF object analysis tool'
+	@echo '  pci                    - PCI tools'
+	@echo '  perf                   - Linux performance measurement and analysis tool'
+	@echo '  selftests              - various kernel selftests'
+	@echo '  bootconfig             - boot config tool'
+	@echo '  spi                    - spi tools'
+	@echo '  tmon                   - thermal monitoring and tuning tool'
+	@echo '  thermometer            - temperature capture tool'
+	@echo '  thermal-engine         - thermal monitoring tool'
+	@echo '  thermal                - thermal library'
+	@echo '  tracing                - misc tracing tools'
+	@echo '  turbostat              - Intel CPU idle stats and freq reporting tool'
+	@echo '  usb                    - USB testing tools'
+	@echo '  virtio                 - vhost test module'
+	@echo '  vm                     - misc vm tools'
+	@echo '  wmi			- WMI interface examples'
+	@echo '  x86_energy_perf_policy - Intel energy policy tool'
+	@echo ''
+	@echo 'You can do:'
+	@echo ' $$ make -C tools/ <tool>_install'
+	@echo ''
+	@echo '  from the kernel command line to build and install one of'
+	@echo '  the tools above'
+	@echo ''
+	@echo '  $$ make tools/all'
+	@echo ''
+	@echo '  builds all tools.'
+	@echo ''
+	@echo '  $$ make tools/install'
+	@echo ''
+	@echo '  installs all tools.'
+	@echo ''
+	@echo 'Cleaning targets:'
+	@echo ''
+	@echo '  all of the above with the "_clean" string appended cleans'
+	@echo '    the respective build directory.'
+	@echo '  clean: a summary clean target to clean _all_ folders'
+
+acpi: FORCE
+	$(call descend,power/$@)
+
+cpupower: FORCE
+	$(call descend,power/$@)
+
+cgroup counter firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
+	$(call descend,$@)
+
+bpf/%: FORCE
+	$(call descend,$@)
+
+libapi: FORCE
+	$(call descend,lib/api)
+
+nolibc: FORCE
+	$(call descend,include/nolibc)
+
+nolibc_%: FORCE
+	$(call descend,include/nolibc,$(patsubst nolibc_%,%,$@))
+
+# The perf build does not follow the descend function setup,
+# invoking it via it's own make rule.
+PERF_O   = $(if $(O),$(O)/tools/perf,)
+
+perf: FORCE
+	$(Q)mkdir -p $(PERF_O) .
+	$(Q)$(MAKE) --no-print-directory -C perf O=$(PERF_O) subdir=
+
+selftests: FORCE
+	$(call descend,testing/$@)
+
+thermal: FORCE
+	$(call descend,lib/$@)
+
+turbostat x86_energy_perf_policy intel-speed-select: FORCE
+	$(call descend,power/x86/$@)
+
+tmon: FORCE
+	$(call descend,thermal/$@)
+
+thermometer: FORCE
+	$(call descend,thermal/$@)
+
+thermal-engine: FORCE thermal
+	$(call descend,thermal/$@)
+
+freefall: FORCE
+	$(call descend,laptop/$@)
+
+kvm_stat: FORCE
+	$(call descend,kvm/$@)
+
+all: acpi cgroup counter cpupower gpio hv firewire \
+		perf selftests bootconfig spi turbostat usb \
+		virtio vm bpf x86_energy_perf_policy \
+		tmon freefall iio objtool kvm_stat wmi \
+		pci debugging tracing thermal thermometer thermal-engine
+
+acpi_install:
+	$(call descend,power/$(@:_install=),install)
+
+cpupower_install:
+	$(call descend,power/$(@:_install=),install)
+
+cgroup_install counter_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
+	$(call descend,$(@:_install=),install)
+
+selftests_install:
+	$(call descend,testing/$(@:_install=),install)
+
+thermal_install:
+	$(call descend,lib/$(@:_install=),install)
+
+turbostat_install x86_energy_perf_policy_install intel-speed-select_install:
+	$(call descend,power/x86/$(@:_install=),install)
+
+tmon_install:
+	$(call descend,thermal/$(@:_install=),install)
+
+thermometer_install:
+	$(call descend,thermal/$(@:_install=),install)
+
+thermal-engine_install:
+	$(call descend,thermal/$(@:_install=),install)
+
+freefall_install:
+	$(call descend,laptop/$(@:_install=),install)
+
+kvm_stat_install:
+	$(call descend,kvm/$(@:_install=),install)
+
+install: acpi_install cgroup_install counter_install cpupower_install gpio_install \
+		hv_install firewire_install iio_install \
+		perf_install selftests_install turbostat_install usb_install \
+		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
+		tmon_install freefall_install objtool_install kvm_stat_install \
+		wmi_install pci_install debugging_install intel-speed-select_install \
+		tracing_install thermometer_install thermal-engine_install
+
+acpi_clean:
+	$(call descend,power/acpi,clean)
+
+cpupower_clean:
+	$(call descend,power/cpupower,clean)
+
+cgroup_clean counter_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
+	$(call descend,$(@:_clean=),clean)
+
+libapi_clean:
+	$(call descend,lib/api,clean)
+
+libbpf_clean:
+	$(call descend,lib/bpf,clean)
+
+libsubcmd_clean:
+	$(call descend,lib/subcmd,clean)
+
+perf_clean:
+	$(Q)mkdir -p $(PERF_O) .
+	$(Q)$(MAKE) --no-print-directory -C perf O=$(PERF_O) subdir= clean
+
+selftests_clean:
+	$(call descend,testing/$(@:_clean=),clean)
+
+thermal_clean:
+	$(call descend,lib/thermal,clean)
+
+turbostat_clean x86_energy_perf_policy_clean intel-speed-select_clean:
+	$(call descend,power/x86/$(@:_clean=),clean)
+
+thermometer_clean:
+	$(call descend,thermal/thermometer,clean)
+
+thermal-engine_clean:
+	$(call descend,thermal/thermal-engine,clean)
+
+tmon_clean:
+	$(call descend,thermal/tmon,clean)
+
+freefall_clean:
+	$(call descend,laptop/freefall,clean)
+
+build_clean:
+	$(call descend,build,clean)
+
+clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_clean \
+		perf_clean selftests_clean turbostat_clean bootconfig_clean spi_clean usb_clean virtio_clean \
+		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
+		freefall_clean build_clean libbpf_clean libsubcmd_clean \
+		gpio_clean objtool_clean leds_clean wmi_clean pci_clean firmware_clean debugging_clean \
+		intel-speed-select_clean tracing_clean thermal_clean thermometer_clean thermal-engine_clean
+
+.PHONY: FORCE