Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 209 insertions, 0 deletions

diff --git a/tools/arch/mips/include/uapi/asm/kvm.h b/tools/arch/mips/include/uapi/asm/kvm.h
new file mode 100644
index 000000000..d2714cc1c
--- /dev/null
+++ b/tools/arch/mips/include/uapi/asm/kvm.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012  MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Cavium, Inc.
+ * Authors: Sanjay Lal <sanjayl@kymasys.com>
+ */
+
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+#include <linux/types.h>
+
+/*
+ * KVM MIPS specific structures and definitions.
+ *
+ * Some parts derived from the x86 version of this file.
+ */
+
+/*
+ * for KVM_GET_REGS and KVM_SET_REGS
+ *
+ * If Config[AT] is zero (32-bit CPU), the register contents are
+ * stored in the lower 32-bits of the struct kvm_regs fields and sign
+ * extended to 64-bits.
+ */
+struct kvm_regs {
+	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+	__u64 gpr[32];
+	__u64 hi;
+	__u64 lo;
+	__u64 pc;
+};
+
+/*
+ * for KVM_GET_FPU and KVM_SET_FPU
+ */
+struct kvm_fpu {
+};
+
+
+/*
+ * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access various
+ * registers.  The id field is broken down as follows:
+ *
+ *  bits[63..52] - As per linux/kvm.h
+ *  bits[51..32] - Must be zero.
+ *  bits[31..16] - Register set.
+ *
+ * Register set = 0: GP registers from kvm_regs (see definitions below).
+ *
+ * Register set = 1: CP0 registers.
+ *  bits[15..8]  - Must be zero.
+ *  bits[7..3]   - Register 'rd'  index.
+ *  bits[2..0]   - Register 'sel' index.
+ *
+ * Register set = 2: KVM specific registers (see definitions below).
+ *
+ * Register set = 3: FPU / MSA registers (see definitions below).
+ *
+ * Other sets registers may be added in the future.  Each set would
+ * have its own identifier in bits[31..16].
+ */
+
+#define KVM_REG_MIPS_GP		(KVM_REG_MIPS | 0x0000000000000000ULL)
+#define KVM_REG_MIPS_CP0	(KVM_REG_MIPS | 0x0000000000010000ULL)
+#define KVM_REG_MIPS_KVM	(KVM_REG_MIPS | 0x0000000000020000ULL)
+#define KVM_REG_MIPS_FPU	(KVM_REG_MIPS | 0x0000000000030000ULL)
+
+
+/*
+ * KVM_REG_MIPS_GP - General purpose registers from kvm_regs.
+ */
+
+#define KVM_REG_MIPS_R0		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  0)
+#define KVM_REG_MIPS_R1		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  1)
+#define KVM_REG_MIPS_R2		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  2)
+#define KVM_REG_MIPS_R3		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  3)
+#define KVM_REG_MIPS_R4		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  4)
+#define KVM_REG_MIPS_R5		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  5)
+#define KVM_REG_MIPS_R6		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  6)
+#define KVM_REG_MIPS_R7		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  7)
+#define KVM_REG_MIPS_R8		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  8)
+#define KVM_REG_MIPS_R9		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 |  9)
+#define KVM_REG_MIPS_R10	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 10)
+#define KVM_REG_MIPS_R11	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 11)
+#define KVM_REG_MIPS_R12	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 12)
+#define KVM_REG_MIPS_R13	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 13)
+#define KVM_REG_MIPS_R14	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 14)
+#define KVM_REG_MIPS_R15	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 15)
+#define KVM_REG_MIPS_R16	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 16)
+#define KVM_REG_MIPS_R17	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 17)
+#define KVM_REG_MIPS_R18	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 18)
+#define KVM_REG_MIPS_R19	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 19)
+#define KVM_REG_MIPS_R20	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 20)
+#define KVM_REG_MIPS_R21	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 21)
+#define KVM_REG_MIPS_R22	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 22)
+#define KVM_REG_MIPS_R23	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 23)
+#define KVM_REG_MIPS_R24	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 24)
+#define KVM_REG_MIPS_R25	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 25)
+#define KVM_REG_MIPS_R26	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 26)
+#define KVM_REG_MIPS_R27	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 27)
+#define KVM_REG_MIPS_R28	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 28)
+#define KVM_REG_MIPS_R29	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 29)
+#define KVM_REG_MIPS_R30	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 30)
+#define KVM_REG_MIPS_R31	(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 31)
+
+#define KVM_REG_MIPS_HI		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 32)
+#define KVM_REG_MIPS_LO		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 33)
+#define KVM_REG_MIPS_PC		(KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 34)
+
+
+/*
+ * KVM_REG_MIPS_KVM - KVM specific control registers.
+ */
+
+/*
+ * CP0_Count control
+ * DC:    Set 0: Master disable CP0_Count and set COUNT_RESUME to now
+ *        Set 1: Master re-enable CP0_Count with unchanged bias, handling timer
+ *               interrupts since COUNT_RESUME
+ *        This can be used to freeze the timer to get a consistent snapshot of
+ *        the CP0_Count and timer interrupt pending state, while also resuming
+ *        safely without losing time or guest timer interrupts.
+ * Other: Reserved, do not change.
+ */
+#define KVM_REG_MIPS_COUNT_CTL	    (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 0)
+#define KVM_REG_MIPS_COUNT_CTL_DC	0x00000001
+
+/*
+ * CP0_Count resume monotonic nanoseconds
+ * The monotonic nanosecond time of the last set of COUNT_CTL.DC (master
+ * disable). Any reads and writes of Count related registers while
+ * COUNT_CTL.DC=1 will appear to occur at this time. When COUNT_CTL.DC is
+ * cleared again (master enable) any timer interrupts since this time will be
+ * emulated.
+ * Modifications to times in the future are rejected.
+ */
+#define KVM_REG_MIPS_COUNT_RESUME   (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 1)
+/*
+ * CP0_Count rate in Hz
+ * Specifies the rate of the CP0_Count timer in Hz. Modifications occur without
+ * discontinuities in CP0_Count.
+ */
+#define KVM_REG_MIPS_COUNT_HZ	    (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 2)
+
+
+/*
+ * KVM_REG_MIPS_FPU - Floating Point and MIPS SIMD Architecture (MSA) registers.
+ *
+ *  bits[15..8]  - Register subset (see definitions below).
+ *  bits[7..5]   - Must be zero.
+ *  bits[4..0]   - Register number within register subset.
+ */
+
+#define KVM_REG_MIPS_FPR	(KVM_REG_MIPS_FPU | 0x0000000000000000ULL)
+#define KVM_REG_MIPS_FCR	(KVM_REG_MIPS_FPU | 0x0000000000000100ULL)
+#define KVM_REG_MIPS_MSACR	(KVM_REG_MIPS_FPU | 0x0000000000000200ULL)
+
+/*
+ * KVM_REG_MIPS_FPR - Floating point / Vector registers.
+ */
+#define KVM_REG_MIPS_FPR_32(n)	(KVM_REG_MIPS_FPR | KVM_REG_SIZE_U32  | (n))
+#define KVM_REG_MIPS_FPR_64(n)	(KVM_REG_MIPS_FPR | KVM_REG_SIZE_U64  | (n))
+#define KVM_REG_MIPS_VEC_128(n)	(KVM_REG_MIPS_FPR | KVM_REG_SIZE_U128 | (n))
+
+/*
+ * KVM_REG_MIPS_FCR - Floating point control registers.
+ */
+#define KVM_REG_MIPS_FCR_IR	(KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 |  0)
+#define KVM_REG_MIPS_FCR_CSR	(KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 31)
+
+/*
+ * KVM_REG_MIPS_MSACR - MIPS SIMD Architecture (MSA) control registers.
+ */
+#define KVM_REG_MIPS_MSA_IR	 (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 |  0)
+#define KVM_REG_MIPS_MSA_CSR	 (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 |  1)
+
+
+/*
+ * KVM MIPS specific structures and definitions
+ *
+ */
+struct kvm_debug_exit_arch {
+	__u64 epc;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+/* definition of registers in kvm_run */
+struct kvm_sync_regs {
+};
+
+/* dummy definition */
+struct kvm_sregs {
+};
+
+struct kvm_mips_interrupt {
+	/* in */
+	__u32 cpu;
+	__u32 irq;
+};
+
+#endif /* __LINUX_KVM_MIPS_H */