Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
new file mode 100644
index 000000000..bd015ec98
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -0,0 +1,157 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+================
+bpftool-cgroup
+================
+-------------------------------------------------------------------------------
+tool for inspection and simple manipulation of eBPF progs
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+.. include:: substitutions.rst
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **cgroup** *COMMAND*
+
+	*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } }
+
+	*COMMANDS* :=
+	{ **show** | **list** | **tree** | **attach** | **detach** | **help** }
+
+CGROUP COMMANDS
+===============
+
+|	**bpftool** **cgroup** { **show** | **list** } *CGROUP* [**effective**]
+|	**bpftool** **cgroup tree** [*CGROUP_ROOT*] [**effective**]
+|	**bpftool** **cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
+|	**bpftool** **cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
+|	**bpftool** **cgroup help**
+|
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+|	*ATTACH_TYPE* := { **cgroup_inet_ingress** | **cgroup_inet_egress** |
+|		**cgroup_inet_sock_create** | **cgroup_sock_ops** |
+|		**cgroup_device** | **cgroup_inet4_bind** | **cgroup_inet6_bind** |
+|		**cgroup_inet4_post_bind** | **cgroup_inet6_post_bind** |
+|		**cgroup_inet4_connect** | **cgroup_inet6_connect** |
+|		**cgroup_inet4_getpeername** | **cgroup_inet6_getpeername** |
+|		**cgroup_inet4_getsockname** | **cgroup_inet6_getsockname** |
+|		**cgroup_udp4_sendmsg** | **cgroup_udp6_sendmsg** |
+|		**cgroup_udp4_recvmsg** | **cgroup_udp6_recvmsg** |
+|		**cgroup_sysctl** | **cgroup_getsockopt** | **cgroup_setsockopt** |
+|		**cgroup_inet_sock_release** }
+|	*ATTACH_FLAGS* := { **multi** | **override** }
+
+DESCRIPTION
+===========
+	**bpftool cgroup { show | list }** *CGROUP* [**effective**]
+		  List all programs attached to the cgroup *CGROUP*.
+
+		  Output will start with program ID followed by attach type,
+		  attach flags and program name.
+
+		  If **effective** is specified retrieve effective programs that
+		  will execute for events within a cgroup. This includes
+		  inherited along with attached ones.
+
+	**bpftool cgroup tree** [*CGROUP_ROOT*] [**effective**]
+		  Iterate over all cgroups in *CGROUP_ROOT* and list all
+		  attached programs. If *CGROUP_ROOT* is not specified,
+		  bpftool uses cgroup v2 mountpoint.
+
+		  The output is similar to the output of cgroup show/list
+		  commands: it starts with absolute cgroup path, followed by
+		  program ID, attach type, attach flags and program name.
+
+		  If **effective** is specified retrieve effective programs that
+		  will execute for events within a cgroup. This includes
+		  inherited along with attached ones.
+
+	**bpftool cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
+		  Attach program *PROG* to the cgroup *CGROUP* with attach type
+		  *ATTACH_TYPE* and optional *ATTACH_FLAGS*.
+
+		  *ATTACH_FLAGS* can be one of: **override** if a sub-cgroup installs
+		  some bpf program, the program in this cgroup yields to sub-cgroup
+		  program; **multi** if a sub-cgroup installs some bpf program,
+		  that cgroup program gets run in addition to the program in this
+		  cgroup.
+
+		  Only one program is allowed to be attached to a cgroup with
+		  no attach flags or the **override** flag. Attaching another
+		  program will release old program and attach the new one.
+
+		  Multiple programs are allowed to be attached to a cgroup with
+		  **multi**. They are executed in FIFO order (those that were
+		  attached first, run first).
+
+		  Non-default *ATTACH_FLAGS* are supported by kernel version 4.14
+		  and later.
+
+		  *ATTACH_TYPE* can be on of:
+		  **ingress** ingress path of the inet socket (since 4.10);
+		  **egress** egress path of the inet socket (since 4.10);
+		  **sock_create** opening of an inet socket (since 4.10);
+		  **sock_ops** various socket operations (since 4.12);
+		  **device** device access (since 4.15);
+		  **bind4** call to bind(2) for an inet4 socket (since 4.17);
+		  **bind6** call to bind(2) for an inet6 socket (since 4.17);
+		  **post_bind4** return from bind(2) for an inet4 socket (since 4.17);
+		  **post_bind6** return from bind(2) for an inet6 socket (since 4.17);
+		  **connect4** call to connect(2) for an inet4 socket (since 4.17);
+		  **connect6** call to connect(2) for an inet6 socket (since 4.17);
+		  **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an
+		  unconnected udp4 socket (since 4.18);
+		  **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an
+		  unconnected udp6 socket (since 4.18);
+		  **recvmsg4** call to recvfrom(2), recvmsg(2), recvmmsg(2) for
+		  an unconnected udp4 socket (since 5.2);
+		  **recvmsg6** call to recvfrom(2), recvmsg(2), recvmmsg(2) for
+		  an unconnected udp6 socket (since 5.2);
+		  **sysctl** sysctl access (since 5.2);
+		  **getsockopt** call to getsockopt (since 5.3);
+		  **setsockopt** call to setsockopt (since 5.3);
+		  **getpeername4** call to getpeername(2) for an inet4 socket (since 5.8);
+		  **getpeername6** call to getpeername(2) for an inet6 socket (since 5.8);
+		  **getsockname4** call to getsockname(2) for an inet4 socket (since 5.8);
+		  **getsockname6** call to getsockname(2) for an inet6 socket (since 5.8).
+		  **sock_release** closing an userspace inet socket (since 5.9).
+
+	**bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
+		  Detach *PROG* from the cgroup *CGROUP* and attach type
+		  *ATTACH_TYPE*.
+
+	**bpftool prog help**
+		  Print short help message.
+
+OPTIONS
+=======
+	.. include:: common_options.rst
+
+	-f, --bpffs
+		  Show file names of pinned programs.
+
+EXAMPLES
+========
+|
+| **# mount -t bpf none /sys/fs/bpf/**
+| **# mkdir /sys/fs/cgroup/test.slice**
+| **# bpftool prog load ./device_cgroup.o /sys/fs/bpf/prog**
+| **# bpftool cgroup attach /sys/fs/cgroup/test.slice/ device id 1 allow_multi**
+
+**# bpftool cgroup list /sys/fs/cgroup/test.slice/**
+
+::
+
+    ID       AttachType      AttachFlags     Name
+    1        device          allow_multi     bpf_prog1
+
+|
+| **# bpftool cgroup detach /sys/fs/cgroup/test.slice/ device id 1**
+| **# bpftool cgroup list /sys/fs/cgroup/test.slice/**
+
+::
+
+    ID       AttachType      AttachFlags     Name