Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

9 files changed, 567 insertions, 0 deletions

diff --git a/tools/edid/1024x768.S b/tools/edid/1024x768.S
new file mode 100644
index 000000000..4aed3f9ab
--- /dev/null
+++ b/tools/edid/1024x768.S
@@ -0,0 +1,43 @@
+/*
+   1024x768.S: EDID data set for standard 1024x768 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 65000 /* kHz */
+#define XPIX 1024
+#define YPIX 768
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 320
+#define YBLANK 38
+#define XOFFSET 8
+#define XPULSE 144
+#define YOFFSET 3
+#define YPULSE 6
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux XGA"
+#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
+#define HSYNC_POL 0
+#define VSYNC_POL 0
+
+#include "edid.S"
diff --git a/tools/edid/1280x1024.S b/tools/edid/1280x1024.S
new file mode 100644
index 000000000..b26dd424c
--- /dev/null
+++ b/tools/edid/1280x1024.S
@@ -0,0 +1,43 @@
+/*
+   1280x1024.S: EDID data set for standard 1280x1024 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 108000 /* kHz */
+#define XPIX 1280
+#define YPIX 1024
+#define XY_RATIO XY_RATIO_5_4
+#define XBLANK 408
+#define YBLANK 42
+#define XOFFSET 48
+#define XPULSE 112
+#define YOFFSET 1
+#define YPULSE 3
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+
+#include "edid.S"
diff --git a/tools/edid/1600x1200.S b/tools/edid/1600x1200.S
new file mode 100644
index 000000000..0d091b282
--- /dev/null
+++ b/tools/edid/1600x1200.S
@@ -0,0 +1,43 @@
+/*
+   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
+
+   Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 162000 /* kHz */
+#define XPIX 1600
+#define YPIX 1200
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 560
+#define YBLANK 50
+#define XOFFSET 64
+#define XPULSE 192
+#define YOFFSET 1
+#define YPULSE 3
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux UXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+
+#include "edid.S"
diff --git a/tools/edid/1680x1050.S b/tools/edid/1680x1050.S
new file mode 100644
index 000000000..7dfed9a33
--- /dev/null
+++ b/tools/edid/1680x1050.S
@@ -0,0 +1,43 @@
+/*
+   1680x1050.S: EDID data set for standard 1680x1050 60 Hz monitor
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 146250 /* kHz */
+#define XPIX 1680
+#define YPIX 1050
+#define XY_RATIO XY_RATIO_16_10
+#define XBLANK 560
+#define YBLANK 39
+#define XOFFSET 104
+#define XPULSE 176
+#define YOFFSET 3
+#define YPULSE 6
+#define DPI 96
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux WSXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+
+#include "edid.S"
diff --git a/tools/edid/1920x1080.S b/tools/edid/1920x1080.S
new file mode 100644
index 000000000..d6ffbba28
--- /dev/null
+++ b/tools/edid/1920x1080.S
@@ -0,0 +1,43 @@
+/*
+   1920x1080.S: EDID data set for standard 1920x1080 60 Hz monitor
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 148500 /* kHz */
+#define XPIX 1920
+#define YPIX 1080
+#define XY_RATIO XY_RATIO_16_9
+#define XBLANK 280
+#define YBLANK 45
+#define XOFFSET 88
+#define XPULSE 44
+#define YOFFSET 4
+#define YPULSE 5
+#define DPI 96
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux FHD"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+
+#include "edid.S"
diff --git a/tools/edid/800x600.S b/tools/edid/800x600.S
new file mode 100644
index 000000000..a5616588d
--- /dev/null
+++ b/tools/edid/800x600.S
@@ -0,0 +1,40 @@
+/*
+   800x600.S: EDID data set for standard 800x600 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+   Copyright (C) 2014 Linaro Limited
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 40000 /* kHz */
+#define XPIX 800
+#define YPIX 600
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 256
+#define YBLANK 28
+#define XOFFSET 40
+#define XPULSE 128
+#define YOFFSET 1
+#define YPULSE 4
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SVGA"
+#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+
+#include "edid.S"
diff --git a/tools/edid/Makefile b/tools/edid/Makefile
new file mode 100644
index 000000000..85a927dfa
--- /dev/null
+++ b/tools/edid/Makefile
@@ -0,0 +1,37 @@
+
+SOURCES	:= $(wildcard [0-9]*x[0-9]*.S)
+
+BIN	:= $(patsubst %.S, %.bin, $(SOURCES))
+
+IHEX	:= $(patsubst %.S, %.bin.ihex, $(SOURCES))
+
+CODE	:= $(patsubst %.S, %.c, $(SOURCES))
+
+all:	$(BIN) $(IHEX) $(CODE)
+
+clean:
+	@rm -f *.o *.bin.ihex *.bin *.c
+
+%.o:	%.S
+	@cc -c $^
+
+%.bin.nocrc:	%.o
+	@objcopy -Obinary $^ $@
+
+%.crc:	%.bin.nocrc
+	@list=$$(for i in `seq 1 127`; do head -c$$i $^ | tail -c1 \
+		| hexdump -v -e '/1 "%02X+"'; done); \
+		echo "ibase=16;100-($${list%?})%100" | bc >$@
+
+%.p:	%.crc %.S
+	@cc -c -DCRC="$$(cat $*.crc)" -o $@ $*.S
+
+%.bin:	%.p
+	@objcopy -Obinary $^ $@
+
+%.bin.ihex:	%.p
+	@objcopy -Oihex $^ $@
+	@dos2unix $@ 2>/dev/null
+
+%.c:	%.bin
+	@echo "{" >$@; hexdump -f hex $^ >>$@; echo "};" >>$@
diff --git a/tools/edid/edid.S b/tools/edid/edid.S
new file mode 100644
index 000000000..c3d138155
--- /dev/null
+++ b/tools/edid/edid.S
@@ -0,0 +1,274 @@
+/*
+   edid.S: EDID data template
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+
+/* Manufacturer */
+#define MFG_LNX1 'L'
+#define MFG_LNX2 'N'
+#define MFG_LNX3 'X'
+#define SERIAL 0
+#define YEAR 2012
+#define WEEK 5
+
+/* EDID 1.3 standard definitions */
+#define XY_RATIO_16_10	0b00
+#define XY_RATIO_4_3	0b01
+#define XY_RATIO_5_4	0b10
+#define XY_RATIO_16_9	0b11
+
+/* Provide defaults for the timing bits */
+#ifndef ESTABLISHED_TIMING1_BITS
+#define ESTABLISHED_TIMING1_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING2_BITS
+#define ESTABLISHED_TIMING2_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING3_BITS
+#define ESTABLISHED_TIMING3_BITS 0x00
+#endif
+
+#define mfgname2id(v1,v2,v3) \
+	((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
+#define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
+#define lsbs2(v1,v2) (((v1&0x0f)<<4)+(v2&0x0f))
+#define msbs2(v1,v2) ((((v1>>8)&0x0f)<<4)+((v2>>8)&0x0f))
+#define msbs4(v1,v2,v3,v4) \
+	((((v1>>8)&0x03)<<6)+(((v2>>8)&0x03)<<4)+\
+	(((v3>>4)&0x03)<<2)+((v4>>4)&0x03))
+#define pixdpi2mm(pix,dpi) ((pix*25)/dpi)
+#define xsize pixdpi2mm(XPIX,DPI)
+#define ysize pixdpi2mm(YPIX,DPI)
+
+		.data
+
+/* Fixed header pattern */
+header:		.byte	0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00
+
+mfg_id:		.hword	swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
+
+prod_code:	.hword	0
+
+/* Serial number. 32 bits, little endian. */
+serial_number:	.long	SERIAL
+
+/* Week of manufacture */
+week:		.byte	WEEK
+
+/* Year of manufacture, less 1990. (1990-2245)
+   If week=255, it is the model year instead */
+year:		.byte	YEAR-1990
+
+version:	.byte	VERSION 	/* EDID version, usually 1 (for 1.3) */
+revision:	.byte	REVISION	/* EDID revision, usually 3 (for 1.3) */
+
+/* If Bit 7=1	Digital input. If set, the following bit definitions apply:
+     Bits 6-1	Reserved, must be 0
+     Bit 0	Signal is compatible with VESA DFP 1.x TMDS CRGB,
+		  1 pixel per clock, up to 8 bits per color, MSB aligned,
+   If Bit 7=0	Analog input. If clear, the following bit definitions apply:
+     Bits 6-5	Video white and sync levels, relative to blank
+		  00=+0.7/-0.3 V; 01=+0.714/-0.286 V;
+		  10=+1.0/-0.4 V; 11=+0.7/0 V
+   Bit 4	Blank-to-black setup (pedestal) expected
+   Bit 3	Separate sync supported
+   Bit 2	Composite sync (on HSync) supported
+   Bit 1	Sync on green supported
+   Bit 0	VSync pulse must be serrated when somposite or
+		  sync-on-green is used. */
+video_parms:	.byte	0x6d
+
+/* Maximum horizontal image size, in centimetres
+   (max 292 cm/115 in at 16:9 aspect ratio) */
+max_hor_size:	.byte	xsize/10
+
+/* Maximum vertical image size, in centimetres.
+   If either byte is 0, undefined (e.g. projector) */
+max_vert_size:	.byte	ysize/10
+
+/* Display gamma, minus 1, times 100 (range 1.00-3.5 */
+gamma:		.byte	120
+
+/* Bit 7	DPMS standby supported
+   Bit 6	DPMS suspend supported
+   Bit 5	DPMS active-off supported
+   Bits 4-3	Display type: 00=monochrome; 01=RGB colour;
+		  10=non-RGB multicolour; 11=undefined
+   Bit 2	Standard sRGB colour space. Bytes 25-34 must contain
+		  sRGB standard values.
+   Bit 1	Preferred timing mode specified in descriptor block 1.
+   Bit 0	GTF supported with default parameter values. */
+dsp_features:	.byte	0xea
+
+/* Chromaticity coordinates. */
+/* Red and green least-significant bits
+   Bits 7-6	Red x value least-significant 2 bits
+   Bits 5-4	Red y value least-significant 2 bits
+   Bits 3-2	Green x value lst-significant 2 bits
+   Bits 1-0	Green y value least-significant 2 bits */
+red_green_lsb:	.byte	0x5e
+
+/* Blue and white least-significant 2 bits */
+blue_white_lsb:	.byte	0xc0
+
+/* Red x value most significant 8 bits.
+   0-255 encodes 0-0.996 (255/256); 0-0.999 (1023/1024) with lsbits */
+red_x_msb:	.byte	0xa4
+
+/* Red y value most significant 8 bits */
+red_y_msb:	.byte	0x59
+
+/* Green x and y value most significant 8 bits */
+green_x_y_msb:	.byte	0x4a,0x98
+
+/* Blue x and y value most significant 8 bits */
+blue_x_y_msb:	.byte	0x25,0x20
+
+/* Default white point x and y value most significant 8 bits */
+white_x_y_msb:	.byte	0x50,0x54
+
+/* Established timings */
+/* Bit 7	720x400 @ 70 Hz
+   Bit 6	720x400 @ 88 Hz
+   Bit 5	640x480 @ 60 Hz
+   Bit 4	640x480 @ 67 Hz
+   Bit 3	640x480 @ 72 Hz
+   Bit 2	640x480 @ 75 Hz
+   Bit 1	800x600 @ 56 Hz
+   Bit 0	800x600 @ 60 Hz */
+estbl_timing1:	.byte	ESTABLISHED_TIMING1_BITS
+
+/* Bit 7	800x600 @ 72 Hz
+   Bit 6	800x600 @ 75 Hz
+   Bit 5	832x624 @ 75 Hz
+   Bit 4	1024x768 @ 87 Hz, interlaced (1024x768)
+   Bit 3	1024x768 @ 60 Hz
+   Bit 2	1024x768 @ 72 Hz
+   Bit 1	1024x768 @ 75 Hz
+   Bit 0	1280x1024 @ 75 Hz */
+estbl_timing2:	.byte	ESTABLISHED_TIMING2_BITS
+
+/* Bit 7	1152x870 @ 75 Hz (Apple Macintosh II)
+   Bits 6-0 	Other manufacturer-specific display mod */
+estbl_timing3:	.byte	ESTABLISHED_TIMING3_BITS
+
+/* Standard timing */
+/* X resolution, less 31, divided by 8 (256-2288 pixels) */
+std_xres:	.byte	(XPIX/8)-31
+/* Y resolution, X:Y pixel ratio
+   Bits 7-6	X:Y pixel ratio: 00=16:10; 01=4:3; 10=5:4; 11=16:9.
+   Bits 5-0	Vertical frequency, less 60 (60-123 Hz) */
+std_vres:	.byte	(XY_RATIO<<6)+VFREQ-60
+		.fill	7,2,0x0101	/* Unused */
+
+descriptor1:
+/* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
+clock:		.hword	CLOCK/10
+
+/* Horizontal active pixels 8 lsbits (0-4095) */
+x_act_lsb:	.byte	XPIX&0xff
+/* Horizontal blanking pixels 8 lsbits (0-4095)
+   End of active to start of next active. */
+x_blk_lsb:	.byte	XBLANK&0xff
+/* Bits 7-4 	Horizontal active pixels 4 msbits
+   Bits 3-0	Horizontal blanking pixels 4 msbits */
+x_msbs:		.byte	msbs2(XPIX,XBLANK)
+
+/* Vertical active lines 8 lsbits (0-4095) */
+y_act_lsb:	.byte	YPIX&0xff
+/* Vertical blanking lines 8 lsbits (0-4095) */
+y_blk_lsb:	.byte	YBLANK&0xff
+/* Bits 7-4 	Vertical active lines 4 msbits
+   Bits 3-0 	Vertical blanking lines 4 msbits */
+y_msbs:		.byte	msbs2(YPIX,YBLANK)
+
+/* Horizontal sync offset pixels 8 lsbits (0-1023) From blanking start */
+x_snc_off_lsb:	.byte	XOFFSET&0xff
+/* Horizontal sync pulse width pixels 8 lsbits (0-1023) */
+x_snc_pls_lsb:	.byte	XPULSE&0xff
+/* Bits 7-4 	Vertical sync offset lines 4 lsbits (0-63)
+   Bits 3-0 	Vertical sync pulse width lines 4 lsbits (0-63) */
+y_snc_lsb:	.byte	lsbs2(YOFFSET, YPULSE)
+/* Bits 7-6 	Horizontal sync offset pixels 2 msbits
+   Bits 5-4 	Horizontal sync pulse width pixels 2 msbits
+   Bits 3-2 	Vertical sync offset lines 2 msbits
+   Bits 1-0 	Vertical sync pulse width lines 2 msbits */
+xy_snc_msbs:	.byte	msbs4(XOFFSET,XPULSE,YOFFSET,YPULSE)
+
+/* Horizontal display size, mm, 8 lsbits (0-4095 mm, 161 in) */
+x_dsp_size:	.byte	xsize&0xff
+
+/* Vertical display size, mm, 8 lsbits (0-4095 mm, 161 in) */
+y_dsp_size:	.byte	ysize&0xff
+
+/* Bits 7-4 	Horizontal display size, mm, 4 msbits
+   Bits 3-0 	Vertical display size, mm, 4 msbits */
+dsp_size_mbsb:	.byte	msbs2(xsize,ysize)
+
+/* Horizontal border pixels (each side; total is twice this) */
+x_border:	.byte	0
+/* Vertical border lines (each side; total is twice this) */
+y_border:	.byte	0
+
+/* Bit 7 	Interlaced
+   Bits 6-5 	Stereo mode: 00=No stereo; other values depend on bit 0:
+   Bit 0=0: 01=Field sequential, sync=1 during right; 10=similar,
+     sync=1 during left; 11=4-way interleaved stereo
+   Bit 0=1 2-way interleaved stereo: 01=Right image on even lines;
+     10=Left image on even lines; 11=side-by-side
+   Bits 4-3 	Sync type: 00=Analog composite; 01=Bipolar analog composite;
+     10=Digital composite (on HSync); 11=Digital separate
+   Bit 2 	If digital separate: Vertical sync polarity (1=positive)
+   Other types: VSync serrated (HSync during VSync)
+   Bit 1 	If analog sync: Sync on all 3 RGB lines (else green only)
+   Digital: HSync polarity (1=positive)
+   Bit 0 	2-way line-interleaved stereo, if bits 4-3 are not 00. */
+features:	.byte	0x18+(VSYNC_POL<<2)+(HSYNC_POL<<1)
+
+descriptor2:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xff	/* Descriptor is monitor serial number (text) */
+		.byte	0	/* Must be zero */
+start1:		.ascii	"Linux #0"
+end1:		.byte	0x0a	/* End marker */
+		.fill	12-(end1-start1), 1, 0x20 /* Padded spaces */
+descriptor3:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xfd	/* Descriptor is monitor range limits */
+		.byte	0	/* Must be zero */
+start2:		.byte	VFREQ-1	/* Minimum vertical field rate (1-255 Hz) */
+		.byte	VFREQ+1	/* Maximum vertical field rate (1-255 Hz) */
+		.byte	(CLOCK/(XPIX+XBLANK))-1 /* Minimum horizontal line rate
+						    (1-255 kHz) */
+		.byte	(CLOCK/(XPIX+XBLANK))+1 /* Maximum horizontal line rate
+						    (1-255 kHz) */
+		.byte	(CLOCK/10000)+1	/* Maximum pixel clock rate, rounded up
+					   to 10 MHz multiple (10-2550 MHz) */
+		.byte	0	/* No extended timing information type */
+end2:		.byte	0x0a	/* End marker */
+		.fill	12-(end2-start2), 1, 0x20 /* Padded spaces */
+descriptor4:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xfc	/* Descriptor is text */
+		.byte	0	/* Must be zero */
+start3:		.ascii	TIMING_NAME
+end3:		.byte	0x0a	/* End marker */
+		.fill	12-(end3-start3), 1, 0x20 /* Padded spaces */
+extensions:	.byte	0	/* Number of extensions to follow */
+checksum:	.byte	CRC	/* Sum of all bytes must be 0 */
diff --git a/tools/edid/hex b/tools/edid/hex
new file mode 100644
index 000000000..8873ebb61
--- /dev/null
+++ b/tools/edid/hex
@@ -0,0 +1 @@
+"\t" 8/1 "0x%02x, " "\n"