Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 112 insertions, 0 deletions

diff --git a/tools/hv/lsvmbus b/tools/hv/lsvmbus
new file mode 100644
index 000000000..099f2c44d
--- /dev/null
+++ b/tools/hv/lsvmbus
@@ -0,0 +1,112 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: GPL-2.0
+
+import os
+from optparse import OptionParser
+
+help_msg = "print verbose messages. Try -vv, -vvv for  more verbose messages"
+parser = OptionParser()
+parser.add_option(
+	"-v", "--verbose", dest="verbose", help=help_msg, action="count")
+
+(options, args) = parser.parse_args()
+
+verbose = 0
+if options.verbose is not None:
+	verbose = options.verbose
+
+vmbus_sys_path = '/sys/bus/vmbus/devices'
+if not os.path.isdir(vmbus_sys_path):
+	print("%s doesn't exist: exiting..." % vmbus_sys_path)
+	exit(-1)
+
+vmbus_dev_dict = {
+	'{0e0b6031-5213-4934-818b-38d90ced39db}': '[Operating system shutdown]',
+	'{9527e630-d0ae-497b-adce-e80ab0175caf}': '[Time Synchronization]',
+	'{57164f39-9115-4e78-ab55-382f3bd5422d}': '[Heartbeat]',
+	'{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}': '[Data Exchange]',
+	'{35fa2e29-ea23-4236-96ae-3a6ebacba440}': '[Backup (volume checkpoint)]',
+	'{34d14be3-dee4-41c8-9ae7-6b174977c192}': '[Guest services]',
+	'{525074dc-8985-46e2-8057-a307dc18a502}': '[Dynamic Memory]',
+	'{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}': 'Synthetic mouse',
+	'{f912ad6d-2b17-48ea-bd65-f927a61c7684}': 'Synthetic keyboard',
+	'{da0a7802-e377-4aac-8e77-0558eb1073f8}': 'Synthetic framebuffer adapter',
+	'{f8615163-df3e-46c5-913f-f2d2f965ed0e}': 'Synthetic network adapter',
+	'{32412632-86cb-44a2-9b5c-50d1417354f5}': 'Synthetic IDE Controller',
+	'{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}': 'Synthetic SCSI Controller',
+	'{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}': 'Synthetic fiber channel adapter',
+	'{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}': 'Synthetic RDMA adapter',
+	'{44c4f61d-4444-4400-9d52-802e27ede19f}': 'PCI Express pass-through',
+	'{276aacf4-ac15-426c-98dd-7521ad3f01fe}': '[Reserved system device]',
+	'{f8e65716-3cb3-4a06-9a60-1889c5cccab5}': '[Reserved system device]',
+	'{3375baf4-9e15-4b30-b765-67acb10d607b}': '[Reserved system device]',
+}
+
+
+def get_vmbus_dev_attr(dev_name, attr):
+	try:
+		f = open('%s/%s/%s' % (vmbus_sys_path, dev_name, attr), 'r')
+		lines = f.readlines()
+		f.close()
+	except IOError:
+		lines = []
+
+	return lines
+
+
+class VMBus_Dev:
+	pass
+
+
+vmbus_dev_list = []
+
+for f in os.listdir(vmbus_sys_path):
+	vmbus_id = get_vmbus_dev_attr(f, 'id')[0].strip()
+	class_id = get_vmbus_dev_attr(f, 'class_id')[0].strip()
+	device_id = get_vmbus_dev_attr(f, 'device_id')[0].strip()
+	dev_desc = vmbus_dev_dict.get(class_id, 'Unknown')
+
+	chn_vp_mapping = get_vmbus_dev_attr(f, 'channel_vp_mapping')
+	chn_vp_mapping = [c.strip() for c in chn_vp_mapping]
+	chn_vp_mapping = sorted(
+		chn_vp_mapping, key=lambda c: int(c.split(':')[0]))
+
+	chn_vp_mapping = [
+		'\tRel_ID=%s, target_cpu=%s' %
+		(c.split(':')[0], c.split(':')[1]) for c in chn_vp_mapping
+	]
+	d = VMBus_Dev()
+	d.sysfs_path = '%s/%s' % (vmbus_sys_path, f)
+	d.vmbus_id = vmbus_id
+	d.class_id = class_id
+	d.device_id = device_id
+	d.dev_desc = dev_desc
+	d.chn_vp_mapping = '\n'.join(chn_vp_mapping)
+	if d.chn_vp_mapping:
+		d.chn_vp_mapping += '\n'
+
+	vmbus_dev_list.append(d)
+
+
+vmbus_dev_list = sorted(vmbus_dev_list, key=lambda d: int(d.vmbus_id))
+
+format0 = '%2s: %s'
+format1 = '%2s: Class_ID = %s - %s\n%s'
+format2 = '%2s: Class_ID = %s - %s\n\tDevice_ID = %s\n\tSysfs path: %s\n%s'
+
+for d in vmbus_dev_list:
+	if verbose == 0:
+		print(('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc))
+	elif verbose == 1:
+		print(
+			('VMBUS ID ' + format1) %
+			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping)
+		)
+	else:
+		print(
+			('VMBUS ID ' + format2) %
+			(
+				d.vmbus_id, d.class_id, d.dev_desc,
+				d.device_id, d.sysfs_path, d.chn_vp_mapping
+			)
+		)