Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 156 insertions, 0 deletions

diff --git a/tools/lib/perf/Documentation/Makefile b/tools/lib/perf/Documentation/Makefile
new file mode 100644
index 000000000..972754082
--- /dev/null
+++ b/tools/lib/perf/Documentation/Makefile
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+# Most of this file is copied from tools/perf/Documentation/Makefile
+
+include ../../../scripts/Makefile.include
+include ../../../scripts/utilities.mak
+
+MAN3_TXT  = libperf.txt
+MAN7_TXT  = libperf-counting.txt libperf-sampling.txt
+MAN_EX    = examples/*.c
+
+MAN_TXT   = $(MAN3_TXT) $(MAN7_TXT)
+
+_MAN_XML  = $(patsubst %.txt,%.xml,$(MAN_TXT))
+_MAN_HTML = $(patsubst %.txt,%.html,$(MAN_TXT))
+_MAN_3    = $(patsubst %.txt,%.3,$(MAN3_TXT))
+_MAN_7    = $(patsubst %.txt,%.7,$(MAN7_TXT))
+
+MAN_XML   = $(addprefix $(OUTPUT),$(_MAN_XML))
+MAN_HTML  = $(addprefix $(OUTPUT),$(_MAN_HTML))
+MAN_3     = $(addprefix $(OUTPUT),$(_MAN_3))
+MAN_7     = $(addprefix $(OUTPUT),$(_MAN_7))
+MAN_X     = $(MAN_3) $(MAN_7)
+
+# Make the path relative to DESTDIR, not prefix
+ifndef DESTDIR
+  prefix ?=$(HOME)
+endif
+
+mandir  ?= $(prefix)/share/man
+man3dir  = $(mandir)/man3
+man7dir  = $(mandir)/man7
+
+docdir  ?= $(prefix)/share/doc/libperf
+htmldir  = $(docdir)/html
+exdir    = $(docdir)/examples
+
+ASCIIDOC        = asciidoc
+ASCIIDOC_EXTRA  = --unsafe -f asciidoc.conf
+ASCIIDOC_HTML   = xhtml11
+MANPAGE_XSL     = manpage-normal.xsl
+XMLTO_EXTRA     =
+XMLTO           =xmlto
+
+INSTALL ?= install
+RM      ?= rm -f
+
+# For asciidoc ...
+#	-7.1.2,	no extra settings are needed.
+#	8.0-,	set ASCIIDOC8.
+#
+
+# For docbook-xsl ...
+#	-1.68.1,	set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+#	1.69.0,		no extra settings are needed?
+#	1.69.1-1.71.0,	set DOCBOOK_SUPPRESS_SP?
+#	1.71.1,		no extra settings are needed?
+#	1.72.0,		set DOCBOOK_XSL_172.
+#	1.73.0-,	set ASCIIDOC_NO_ROFF
+
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+
+ifdef ASCIIDOC8
+  ASCIIDOC_EXTRA += -a asciidoc7compatible
+endif
+ifdef DOCBOOK_XSL_172
+  ASCIIDOC_EXTRA += -a libperf-asciidoc-no-roff
+  MANPAGE_XSL = manpage-1.72.xsl
+else
+  ifdef ASCIIDOC_NO_ROFF
+    # docbook-xsl after 1.72 needs the regular XSL, but will not
+    # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+    ASCIIDOC_EXTRA += -a libperf-asciidoc-no-roff
+  endif
+endif
+ifdef MAN_BOLD_LITERAL
+  XMLTO_EXTRA += -m manpage-bold-literal.xsl
+endif
+ifdef DOCBOOK_SUPPRESS_SP
+  XMLTO_EXTRA += -m manpage-suppress-sp.xsl
+endif
+
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
+export DESTDIR DESTDIR_SQ
+
+# Please note that there is a minor bug in asciidoc.
+# The version after 6.0.3 _will_ include the patch found here:
+#   http://marc.theaimsgroup.com/?l=libtraceevent&m=111558757202243&w=2
+#
+# Until that version is released you may have to apply the patch
+# yourself - yes, all 6 characters of it!
+
+QUIET_SUBDIR0  = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1  =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+  PRINT_DIR = --no-print-directory
+else # "make -w"
+  NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+  ifneq ($(V),1)
+    QUIET_ASCIIDOC = @echo '  ASCIIDOC '$@;
+    QUIET_XMLTO    = @echo '  XMLTO    '$@;
+  endif
+endif
+
+all: $(MAN_X) $(MAN_HTML)
+
+$(MAN_HTML) $(MAN_X): asciidoc.conf
+
+install-man: all
+	$(call QUIET_INSTALL, man) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(man3dir); \
+		$(INSTALL) -m 644 $(MAN_3) $(DESTDIR)$(man3dir); \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir); \
+		$(INSTALL) -m 644 $(MAN_7) $(DESTDIR)$(man7dir);
+
+install-html:
+	$(call QUIET_INSTALL, html) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(htmldir); \
+		$(INSTALL) -m 644 $(MAN_HTML) $(DESTDIR)$(htmldir); \
+
+install-examples:
+	$(call QUIET_INSTALL, examples) \
+		$(INSTALL) -d -m 755 $(DESTDIR)$(exdir); \
+		$(INSTALL) -m 644 $(MAN_EX) $(DESTDIR)$(exdir); \
+
+CLEAN_FILES =					\
+	$(MAN_XML) $(addsuffix +,$(MAN_XML))	\
+	$(MAN_HTML) $(addsuffix +,$(MAN_HTML))	\
+	$(MAN_X)
+
+clean:
+	$(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES)
+
+$(MAN_3): $(OUTPUT)%.3: %.xml
+	$(QUIET_XMLTO)$(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
+
+$(MAN_7): $(OUTPUT)%.7: %.xml
+	$(QUIET_XMLTO)$(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
+
+$(MAN_XML): $(OUTPUT)%.xml: %.txt
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b docbook -d manpage \
+		$(ASCIIDOC_EXTRA) -alibperf_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \
+	mv $@+ $@
+
+$(MAN_HTML): $(OUTPUT)%.html: %.txt
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \
+	$(ASCIIDOC_EXTRA) -aperf_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \
+	mv $@+ $@