Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 220 insertions, 0 deletions

diff --git a/tools/lib/perf/Makefile b/tools/lib/perf/Makefile
new file mode 100644
index 000000000..d8cad124e
--- /dev/null
+++ b/tools/lib/perf/Makefile
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+# Most of this file is copied from tools/lib/bpf/Makefile
+
+LIBPERF_VERSION = 0
+LIBPERF_PATCHLEVEL = 0
+LIBPERF_EXTRAVERSION = 1
+
+MAKEFLAGS += --no-print-directory
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+#$(info Determined 'srctree' to be $(srctree))
+endif
+
+INSTALL = install
+
+# Use DESTDIR for installing into a different root directory.
+# This is useful for building a package. The program will be
+# installed in this directory as if it was the root directory.
+# Then the build tool can move it later.
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
+include $(srctree)/tools/scripts/Makefile.include
+include $(srctree)/tools/scripts/Makefile.arch
+
+ifeq ($(LP64), 1)
+  libdir_relative = lib64
+else
+  libdir_relative = lib
+endif
+
+prefix ?=
+libdir = $(prefix)/$(libdir_relative)
+
+# Shell quotes
+libdir_SQ = $(subst ','\'',$(libdir))
+libdir_relative_SQ = $(subst ','\'',$(libdir_relative))
+
+ifeq ("$(origin V)", "command line")
+  VERBOSE = $(V)
+endif
+ifndef VERBOSE
+  VERBOSE = 0
+endif
+
+ifeq ($(VERBOSE),1)
+  Q =
+else
+  Q = @
+endif
+
+TEST_ARGS := $(if $(V),-v)
+
+# Set compile option CFLAGS
+ifdef EXTRA_CFLAGS
+  CFLAGS := $(EXTRA_CFLAGS)
+else
+  CFLAGS := -g -Wall
+endif
+
+INCLUDES = \
+-I$(srctree)/tools/lib/perf/include \
+-I$(srctree)/tools/lib/ \
+-I$(srctree)/tools/include \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/ \
+-I$(srctree)/tools/arch/$(SRCARCH)/include/uapi \
+-I$(srctree)/tools/include/uapi
+
+# Append required CFLAGS
+override CFLAGS += $(EXTRA_WARNINGS)
+override CFLAGS += -Werror -Wall
+override CFLAGS += -fPIC
+override CFLAGS += $(INCLUDES)
+override CFLAGS += -fvisibility=hidden
+
+all:
+
+export srctree OUTPUT CC LD CFLAGS V
+export DESTDIR DESTDIR_SQ
+
+include $(srctree)/tools/build/Makefile.include
+
+VERSION_SCRIPT := libperf.map
+
+PATCHLEVEL    = $(LIBPERF_PATCHLEVEL)
+EXTRAVERSION  = $(LIBPERF_EXTRAVERSION)
+VERSION       = $(LIBPERF_VERSION).$(LIBPERF_PATCHLEVEL).$(LIBPERF_EXTRAVERSION)
+
+LIBPERF_SO := $(OUTPUT)libperf.so.$(VERSION)
+LIBPERF_A  := $(OUTPUT)libperf.a
+LIBPERF_IN := $(OUTPUT)libperf-in.o
+LIBPERF_PC := $(OUTPUT)libperf.pc
+
+LIBPERF_ALL := $(LIBPERF_A) $(OUTPUT)libperf.so*
+
+LIB_DIR := $(srctree)/tools/lib/api/
+
+ifneq ($(OUTPUT),)
+ifneq ($(subdir),)
+  API_PATH=$(OUTPUT)/../lib/api/
+else
+  API_PATH=$(OUTPUT)
+endif
+else
+  API_PATH=$(LIB_DIR)
+endif
+
+LIBAPI = $(API_PATH)libapi.a
+export LIBAPI
+
+$(LIBAPI): FORCE
+	$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) $(OUTPUT)libapi.a
+
+$(LIBAPI)-clean:
+	$(call QUIET_CLEAN, libapi)
+	$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null
+
+$(LIBPERF_IN): FORCE
+	$(Q)$(MAKE) $(build)=libperf
+
+$(LIBPERF_A): $(LIBPERF_IN)
+	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIBPERF_IN)
+
+$(LIBPERF_SO): $(LIBPERF_IN) $(LIBAPI)
+	$(QUIET_LINK)$(CC) --shared -Wl,-soname,libperf.so \
+                                    -Wl,--version-script=$(VERSION_SCRIPT) $^ -o $@
+	@ln -sf $(@F) $(OUTPUT)libperf.so
+	@ln -sf $(@F) $(OUTPUT)libperf.so.$(LIBPERF_VERSION)
+
+
+libs: $(LIBPERF_A) $(LIBPERF_SO) $(LIBPERF_PC)
+
+all: fixdep
+	$(Q)$(MAKE) libs
+
+clean: $(LIBAPI)-clean
+	$(call QUIET_CLEAN, libperf) $(RM) $(LIBPERF_A) \
+                *.o *~ *.a *.so *.so.$(VERSION) *.so.$(LIBPERF_VERSION) .*.d .*.cmd tests/*.o LIBPERF-CFLAGS $(LIBPERF_PC) \
+                $(TESTS_STATIC) $(TESTS_SHARED)
+
+TESTS_IN = tests-in.o
+
+TESTS_STATIC = $(OUTPUT)tests-static
+TESTS_SHARED = $(OUTPUT)tests-shared
+
+$(TESTS_IN): FORCE
+	$(Q)$(MAKE) $(build)=tests
+
+$(TESTS_STATIC): $(TESTS_IN) $(LIBPERF_A) $(LIBAPI)
+	$(QUIET_LINK)$(CC) -o $@ $^
+
+$(TESTS_SHARED): $(TESTS_IN) $(LIBAPI)
+	$(QUIET_LINK)$(CC) -o $@ -L$(or $(OUTPUT),.) $^ -lperf
+
+make-tests: libs $(TESTS_SHARED) $(TESTS_STATIC)
+
+tests: make-tests
+	@echo "running static:"
+	@./$(TESTS_STATIC) $(TEST_ARGS)
+	@echo "running dynamic:"
+	@LD_LIBRARY_PATH=. ./$(TESTS_SHARED) $(TEST_ARGS)
+
+$(LIBPERF_PC):
+	$(QUIET_GEN)sed -e "s|@PREFIX@|$(prefix)|" \
+		-e "s|@LIBDIR@|$(libdir_SQ)|" \
+		-e "s|@VERSION@|$(VERSION)|" \
+		< libperf.pc.template > $@
+
+define do_install_mkdir
+	if [ ! -d '$(DESTDIR_SQ)$1' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+	fi
+endef
+
+define do_install
+	if [ ! -d '$2' ]; then             \
+		$(INSTALL) -d -m 755 '$2'; \
+	fi;                                \
+	$(INSTALL) $1 $(if $3,-m $3,) '$2'
+endef
+
+install_lib: libs
+	$(call QUIET_INSTALL, $(LIBPERF_ALL)) \
+		$(call do_install_mkdir,$(libdir_SQ)); \
+		cp -fpR $(LIBPERF_ALL) $(DESTDIR)$(libdir_SQ)
+
+HDRS := bpf_perf.h core.h cpumap.h threadmap.h evlist.h evsel.h event.h mmap.h
+INTERNAL_HDRS := cpumap.h evlist.h evsel.h lib.h mmap.h threadmap.h xyarray.h
+
+INSTALL_HDRS_PFX := $(DESTDIR)$(prefix)/include/perf
+INSTALL_HDRS := $(addprefix $(INSTALL_HDRS_PFX)/, $(HDRS))
+INSTALL_INTERNAL_HDRS_PFX := $(DESTDIR)$(prefix)/include/internal
+INSTALL_INTERNAL_HDRS := $(addprefix $(INSTALL_INTERNAL_HDRS_PFX)/, $(INTERNAL_HDRS))
+
+$(INSTALL_HDRS): $(INSTALL_HDRS_PFX)/%.h: include/perf/%.h
+	$(call QUIET_INSTALL, $@) \
+		$(call do_install,$<,$(INSTALL_HDRS_PFX)/,644)
+
+$(INSTALL_INTERNAL_HDRS): $(INSTALL_INTERNAL_HDRS_PFX)/%.h: include/internal/%.h
+	$(call QUIET_INSTALL, $@) \
+		$(call do_install,$<,$(INSTALL_INTERNAL_HDRS_PFX)/,644)
+
+install_headers: $(INSTALL_HDRS) $(INSTALL_INTERNAL_HDRS)
+	$(call QUIET_INSTALL, libperf_headers)
+
+install_pkgconfig: $(LIBPERF_PC)
+	$(call QUIET_INSTALL, $(LIBPERF_PC)) \
+		$(call do_install,$(LIBPERF_PC),$(DESTDIR_SQ)$(libdir_SQ)/pkgconfig,644)
+
+install_doc:
+	$(Q)$(MAKE) -C Documentation install-man install-html install-examples
+
+install: install_lib install_headers install_pkgconfig install_doc
+
+FORCE:
+
+.PHONY: all install clean tests FORCE