Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 213 insertions, 0 deletions

diff --git a/tools/lib/subcmd/exec-cmd.c b/tools/lib/subcmd/exec-cmd.c
new file mode 100644
index 000000000..5dbea4569
--- /dev/null
+++ b/tools/lib/subcmd/exec-cmd.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/compiler.h>
+#include <linux/string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include "subcmd-util.h"
+#include "exec-cmd.h"
+#include "subcmd-config.h"
+
+#define MAX_ARGS	32
+#define PATH_MAX	4096
+
+static const char *argv_exec_path;
+static const char *argv0_path;
+
+void exec_cmd_init(const char *exec_name, const char *prefix,
+		   const char *exec_path, const char *exec_path_env)
+{
+	subcmd_config.exec_name		= exec_name;
+	subcmd_config.prefix		= prefix;
+	subcmd_config.exec_path		= exec_path;
+	subcmd_config.exec_path_env	= exec_path_env;
+
+	/* Setup environment variable for invoked shell script. */
+	setenv("PREFIX", prefix, 1);
+}
+
+#define is_dir_sep(c) ((c) == '/')
+
+static int is_absolute_path(const char *path)
+{
+	return path[0] == '/';
+}
+
+static const char *get_pwd_cwd(void)
+{
+	static char cwd[PATH_MAX + 1];
+	char *pwd;
+	struct stat cwd_stat, pwd_stat;
+	if (getcwd(cwd, PATH_MAX) == NULL)
+		return NULL;
+	pwd = getenv("PWD");
+	if (pwd && strcmp(pwd, cwd)) {
+		stat(cwd, &cwd_stat);
+		if (!stat(pwd, &pwd_stat) &&
+		    pwd_stat.st_dev == cwd_stat.st_dev &&
+		    pwd_stat.st_ino == cwd_stat.st_ino) {
+			strlcpy(cwd, pwd, PATH_MAX);
+		}
+	}
+	return cwd;
+}
+
+static const char *make_nonrelative_path(const char *path)
+{
+	static char buf[PATH_MAX + 1];
+
+	if (is_absolute_path(path)) {
+		if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX)
+			die("Too long path: %.*s", 60, path);
+	} else {
+		const char *cwd = get_pwd_cwd();
+		if (!cwd)
+			die("Cannot determine the current working directory");
+		if (snprintf(buf, PATH_MAX, "%s/%s", cwd, path) >= PATH_MAX)
+			die("Too long path: %.*s", 60, path);
+	}
+	return buf;
+}
+
+char *system_path(const char *path)
+{
+	char *buf = NULL;
+
+	if (is_absolute_path(path))
+		return strdup(path);
+
+	astrcatf(&buf, "%s/%s", subcmd_config.prefix, path);
+
+	return buf;
+}
+
+const char *extract_argv0_path(const char *argv0)
+{
+	const char *slash;
+
+	if (!argv0 || !*argv0)
+		return NULL;
+	slash = argv0 + strlen(argv0);
+
+	while (argv0 <= slash && !is_dir_sep(*slash))
+		slash--;
+
+	if (slash >= argv0) {
+		argv0_path = strndup(argv0, slash - argv0);
+		return argv0_path ? slash + 1 : NULL;
+	}
+
+	return argv0;
+}
+
+void set_argv_exec_path(const char *exec_path)
+{
+	argv_exec_path = exec_path;
+	/*
+	 * Propagate this setting to external programs.
+	 */
+	setenv(subcmd_config.exec_path_env, exec_path, 1);
+}
+
+
+/* Returns the highest-priority location to look for subprograms. */
+char *get_argv_exec_path(void)
+{
+	char *env;
+
+	if (argv_exec_path)
+		return strdup(argv_exec_path);
+
+	env = getenv(subcmd_config.exec_path_env);
+	if (env && *env)
+		return strdup(env);
+
+	return system_path(subcmd_config.exec_path);
+}
+
+static void add_path(char **out, const char *path)
+{
+	if (path && *path) {
+		if (is_absolute_path(path))
+			astrcat(out, path);
+		else
+			astrcat(out, make_nonrelative_path(path));
+
+		astrcat(out, ":");
+	}
+}
+
+void setup_path(void)
+{
+	const char *old_path = getenv("PATH");
+	char *new_path = NULL;
+	char *tmp = get_argv_exec_path();
+
+	add_path(&new_path, tmp);
+	add_path(&new_path, argv0_path);
+	free(tmp);
+
+	if (old_path)
+		astrcat(&new_path, old_path);
+	else
+		astrcat(&new_path, "/usr/local/bin:/usr/bin:/bin");
+
+	setenv("PATH", new_path, 1);
+
+	free(new_path);
+}
+
+static const char **prepare_exec_cmd(const char **argv)
+{
+	int argc;
+	const char **nargv;
+
+	for (argc = 0; argv[argc]; argc++)
+		; /* just counting */
+	nargv = malloc(sizeof(*nargv) * (argc + 2));
+
+	nargv[0] = subcmd_config.exec_name;
+	for (argc = 0; argv[argc]; argc++)
+		nargv[argc + 1] = argv[argc];
+	nargv[argc + 1] = NULL;
+	return nargv;
+}
+
+int execv_cmd(const char **argv) {
+	const char **nargv = prepare_exec_cmd(argv);
+
+	/* execvp() can only ever return if it fails */
+	execvp(subcmd_config.exec_name, (char **)nargv);
+
+	free(nargv);
+	return -1;
+}
+
+
+int execl_cmd(const char *cmd,...)
+{
+	int argc;
+	const char *argv[MAX_ARGS + 1];
+	const char *arg;
+	va_list param;
+
+	va_start(param, cmd);
+	argv[0] = cmd;
+	argc = 1;
+	while (argc < MAX_ARGS) {
+		arg = argv[argc++] = va_arg(param, char *);
+		if (!arg)
+			break;
+	}
+	va_end(param);
+	if (MAX_ARGS <= argc) {
+		fprintf(stderr, " Error: too many args to run %s\n", cmd);
+		return -1;
+	}
+
+	argv[argc] = NULL;
+	return execv_cmd(argv);
+}