Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

12 files changed, 2395 insertions, 0 deletions

diff --git a/tools/perf/pmu-events/arch/powerpc/power10/cache.json b/tools/perf/pmu-events/arch/powerpc/power10/cache.json
new file mode 100644
index 000000000..605be14f4
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/cache.json
@@ -0,0 +1,57 @@
+[
+  {
+    "EventCode": "0x1003C",
+    "EventName": "PM_EXEC_STALL_DMISS_L2L3",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from either the local L2 or local L3."
+  },
+  {
+    "EventCode": "0x1E054",
+    "EventName": "PM_EXEC_STALL_DMISS_L21_L31",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from another core's L2 or L3 on the same chip."
+  },
+  {
+    "EventCode": "0x34054",
+    "EventName": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from the local L2 or local L3, without a dispatch conflict."
+  },
+  {
+    "EventCode": "0x34056",
+    "EventName": "PM_EXEC_STALL_LOAD_FINISH",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was finishing a load after its data was reloaded from a data source beyond the local L1; cycles in which the LSU was processing an L1-hit; cycles in which the NTF instruction merged with another load in the LMQ; cycles in which the NTF instruction is waiting for a data reload for a load miss, but the data comes back with a non-NTF instruction."
+  },
+  {
+    "EventCode": "0x3006C",
+    "EventName": "PM_RUN_CYC_SMT2_MODE",
+    "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT2 mode."
+  },
+  {
+    "EventCode": "0x300F4",
+    "EventName": "PM_RUN_INST_CMPL_CONC",
+    "BriefDescription": "PowerPC instructions completed by this thread when all threads in the core had the run-latch set."
+  },
+  {
+    "EventCode": "0x4C016",
+    "EventName": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from the local L2 or local L3, with a dispatch conflict."
+  },
+  {
+    "EventCode": "0x4D014",
+    "EventName": "PM_EXEC_STALL_LOAD",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a load instruction executing in the Load Store Unit."
+  },
+  {
+    "EventCode": "0x4D016",
+    "EventName": "PM_EXEC_STALL_PTESYNC",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a PTESYNC instruction executing in the Load Store Unit."
+  },
+  {
+    "EventCode": "0x401EA",
+    "EventName": "PM_THRESH_EXC_128",
+    "BriefDescription": "Threshold counter exceeded a value of 128."
+  },
+  {
+    "EventCode": "0x400F6",
+    "EventName": "PM_BR_MPRED_CMPL",
+    "BriefDescription": "A mispredicted branch completed. Includes direction and target."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/floating_point.json b/tools/perf/pmu-events/arch/powerpc/power10/floating_point.json
new file mode 100644
index 000000000..54acb55e2
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/floating_point.json
@@ -0,0 +1,7 @@
+[
+  {
+    "EventCode": "0x4016E",
+    "EventName": "PM_THRESH_NOT_MET",
+    "BriefDescription": "Threshold counter did not meet threshold."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/frontend.json b/tools/perf/pmu-events/arch/powerpc/power10/frontend.json
new file mode 100644
index 000000000..558f9530f
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/frontend.json
@@ -0,0 +1,247 @@
+[
+  {
+    "EventCode": "0x10004",
+    "EventName": "PM_EXEC_STALL_TRANSLATION",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline suffered a TLB miss or ERAT miss and waited for it to resolve."
+  },
+  {
+    "EventCode": "0x10006",
+    "EventName": "PM_DISP_STALL_HELD_OTHER_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch for any other reason."
+  },
+  {
+    "EventCode": "0x10010",
+    "EventName": "PM_PMC4_OVERFLOW",
+    "BriefDescription": "The event selected for PMC4 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x10020",
+    "EventName": "PM_PMC4_REWIND",
+    "BriefDescription": "The speculative event selected for PMC4 rewinds and the counter for PMC4 is not charged."
+  },
+  {
+    "EventCode": "0x10038",
+    "EventName": "PM_DISP_STALL_TRANSLATION",
+    "BriefDescription": "Cycles when dispatch was stalled for this thread because the MMU was handling a translation miss."
+  },
+  {
+    "EventCode": "0x1003A",
+    "EventName": "PM_DISP_STALL_BR_MPRED_IC_L2",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from the local L2 after suffering a branch mispredict."
+  },
+  {
+    "EventCode": "0x1D05E",
+    "EventName": "PM_DISP_STALL_HELD_HALT_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch because of power management."
+  },
+  {
+    "EventCode": "0x1E050",
+    "EventName": "PM_DISP_STALL_HELD_STF_MAPPER_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch because the STF mapper/SRB was full. Includes GPR (count, link, tar), VSR, VMR, FPR."
+  },
+  {
+    "EventCode": "0x1F054",
+    "EventName": "PM_DTLB_HIT",
+    "BriefDescription": "The PTE required by the instruction was resident in the TLB (data TLB access). When MMCR1[16]=0 this event counts only demand hits. When MMCR1[16]=1 this event includes demand and prefetch. Applies to both HPT and RPT."
+  },
+  {
+    "EventCode": "0x10064",
+    "EventName": "PM_DISP_STALL_IC_L2",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from the local L2."
+  },
+  {
+    "EventCode": "0x101E8",
+    "EventName": "PM_THRESH_EXC_256",
+    "BriefDescription": "Threshold counter exceeded a count of 256."
+  },
+  {
+    "EventCode": "0x101EC",
+    "EventName": "PM_THRESH_MET",
+    "BriefDescription": "Threshold exceeded."
+  },
+  {
+    "EventCode": "0x100F2",
+    "EventName": "PM_1PLUS_PPC_CMPL",
+    "BriefDescription": "Cycles in which at least one instruction is completed by this thread."
+  },
+  {
+    "EventCode": "0x100F6",
+    "EventName": "PM_IERAT_MISS",
+    "BriefDescription": "IERAT Reloaded to satisfy an IERAT miss. All page sizes are counted by this event."
+  },
+  {
+    "EventCode": "0x100F8",
+    "EventName": "PM_DISP_STALL_CYC",
+    "BriefDescription": "Cycles the ICT has no itags assigned to this thread (no instructions were dispatched during these cycles)."
+  },
+  {
+    "EventCode": "0x20006",
+    "EventName": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch due to Issue queue full. Includes issue queue and branch queue."
+  },
+  {
+    "EventCode": "0x20114",
+    "EventName": "PM_MRK_L2_RC_DISP",
+    "BriefDescription": "Marked instruction RC dispatched in L2."
+  },
+  {
+    "EventCode": "0x2C010",
+    "EventName": "PM_EXEC_STALL_LSU",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was executing in the Load Store Unit. This does not include simple fixed point instructions."
+  },
+  {
+    "EventCode": "0x2C016",
+    "EventName": "PM_DISP_STALL_IERAT_ONLY_MISS",
+    "BriefDescription": "Cycles when dispatch was stalled while waiting to resolve an instruction ERAT miss."
+  },
+  {
+    "EventCode": "0x2C01E",
+    "EventName": "PM_DISP_STALL_BR_MPRED_IC_L3",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from the local L3 after suffering a branch mispredict."
+  },
+  {
+    "EventCode": "0x2D01A",
+    "EventName": "PM_DISP_STALL_IC_MISS",
+    "BriefDescription": "Cycles when dispatch was stalled for this thread due to an Icache Miss."
+  },
+  {
+    "EventCode": "0x2E018",
+    "EventName": "PM_DISP_STALL_FETCH",
+    "BriefDescription": "Cycles when dispatch was stalled for this thread because Fetch was being held."
+  },
+  {
+    "EventCode": "0x2E01A",
+    "EventName": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch because the XVFC mapper/SRB was full."
+  },
+  {
+    "EventCode": "0x2C142",
+    "EventName": "PM_MRK_XFER_FROM_SRC_PMC2",
+    "BriefDescription": "For a marked data transfer instruction, the processor's L1 data cache was reloaded from the source specified in MMCR3[15:27]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x24050",
+    "EventName": "PM_IOPS_DISP",
+    "BriefDescription": "Internal Operations dispatched. PM_IOPS_DISP / PM_INST_DISP will show the average number of internal operations per PowerPC instruction."
+  },
+  {
+    "EventCode": "0x2405E",
+    "EventName": "PM_ISSUE_CANCEL",
+    "BriefDescription": "An instruction issued and the issue was later cancelled. Only one cancel per PowerPC instruction."
+  },
+  {
+    "EventCode": "0x200FA",
+    "EventName": "PM_BR_TAKEN_CMPL",
+    "BriefDescription": "Branch Taken instruction completed."
+  },
+  {
+    "EventCode": "0x30004",
+    "EventName": "PM_DISP_STALL_FLUSH",
+    "BriefDescription": "Cycles when dispatch was stalled because of a flush that happened to an instruction(s) that was not yet NTC. PM_EXEC_STALL_NTC_FLUSH only includes instructions that were flushed after becoming NTC."
+  },
+  {
+    "EventCode": "0x3000A",
+    "EventName": "PM_DISP_STALL_ITLB_MISS",
+    "BriefDescription": "Cycles when dispatch was stalled while waiting to resolve an instruction TLB miss."
+  },
+  {
+    "EventCode": "0x30012",
+    "EventName": "PM_FLUSH_COMPLETION",
+    "BriefDescription": "The instruction that was next to complete (oldest in the pipeline) did not complete because it suffered a flush."
+  },
+  {
+    "EventCode": "0x30014",
+    "EventName": "PM_EXEC_STALL_STORE",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a store instruction executing in the Load Store Unit."
+  },
+  {
+    "EventCode": "0x30018",
+    "EventName": "PM_DISP_STALL_HELD_SCOREBOARD_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch while waiting on the Scoreboard. This event combines VSCR and FPSCR together."
+  },
+  {
+    "EventCode": "0x30026",
+    "EventName": "PM_EXEC_STALL_STORE_MISS",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a store whose cache line was not resident in the L1 and was waiting for allocation of the missing line into the L1."
+  },
+  {
+    "EventCode": "0x3012A",
+    "EventName": "PM_MRK_L2_RC_DONE",
+    "BriefDescription": "L2 RC machine completed the transaction for the marked instruction."
+  },
+  {
+    "EventCode": "0x3F046",
+    "EventName": "PM_ITLB_HIT_1G",
+    "BriefDescription": "Instruction TLB hit (IERAT reload) page size 1G, which implies Radix Page Table translation is in use. When MMCR1[17]=0 this event counts only for demand misses. When MMCR1[17]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x34058",
+    "EventName": "PM_DISP_STALL_BR_MPRED_ICMISS",
+    "BriefDescription": "Cycles when dispatch was stalled after a mispredicted branch resulted in an instruction cache miss."
+  },
+  {
+    "EventCode": "0x3D05C",
+    "EventName": "PM_DISP_STALL_HELD_RENAME_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch because the mapper/SRB was full. Includes GPR (count, link, tar), VSR, VMR, FPR and XVFC."
+  },
+  {
+    "EventCode": "0x3E052",
+    "EventName": "PM_DISP_STALL_IC_L3",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from the local L3."
+  },
+  {
+    "EventCode": "0x3E054",
+    "EventName": "PM_LD_MISS_L1",
+    "BriefDescription": "Load Missed L1, counted at execution time (can be greater than loads finished). LMQ merges are not included in this count. i.e. if a load instruction misses on an address that is already allocated on the LMQ, this event will not increment for that load). Note that this count is per slice, so if a load spans multiple slices this event will increment multiple times for a single load."
+  },
+  {
+    "EventCode": "0x301EA",
+    "EventName": "PM_THRESH_EXC_1024",
+    "BriefDescription": "Threshold counter exceeded a value of 1024."
+  },
+  {
+    "EventCode": "0x300FA",
+    "EventName": "PM_INST_FROM_L3MISS",
+    "BriefDescription": "The processor's instruction cache was reloaded from a source other than the local core's L1, L2, or L3 due to a demand miss."
+  },
+  {
+    "EventCode": "0x40006",
+    "EventName": "PM_ISSUE_KILL",
+    "BriefDescription": "Cycles in which an instruction or group of instructions were cancelled after being issued. This event increments once per occurrence, regardless of how many instructions are included in the issue group."
+  },
+  {
+    "EventCode": "0x40116",
+    "EventName": "PM_MRK_LARX_FIN",
+    "BriefDescription": "Marked load and reserve instruction (LARX) finished. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x4C010",
+    "EventName": "PM_DISP_STALL_BR_MPRED_IC_L3MISS",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from sources beyond the local L3 after suffering a mispredicted branch."
+  },
+  {
+    "EventCode": "0x4D01E",
+    "EventName": "PM_DISP_STALL_BR_MPRED",
+    "BriefDescription": "Cycles when dispatch was stalled for this thread due to a mispredicted branch."
+  },
+  {
+    "EventCode": "0x4E010",
+    "EventName": "PM_DISP_STALL_IC_L3MISS",
+    "BriefDescription": "Cycles when dispatch was stalled while the instruction was fetched from any source beyond the local L3."
+  },
+  {
+    "EventCode": "0x4E01A",
+    "EventName": "PM_DISP_STALL_HELD_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch for any reason."
+  },
+  {
+    "EventCode": "0x4003C",
+    "EventName": "PM_DISP_STALL_HELD_SYNC_CYC",
+    "BriefDescription": "Cycles in which the NTC instruction is held at dispatch because of a synchronizing instruction that requires the ICT to be empty before dispatch."
+  },
+  {
+    "EventCode": "0x44056",
+    "EventName": "PM_VECTOR_ST_CMPL",
+    "BriefDescription": "Vector store instructions completed."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/locks.json b/tools/perf/pmu-events/arch/powerpc/power10/locks.json
new file mode 100644
index 000000000..b5a0d6521
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/locks.json
@@ -0,0 +1,12 @@
+[
+  {
+    "EventCode": "0x1E058",
+    "EventName": "PM_STCX_FAIL_FIN",
+    "BriefDescription": "Conditional store instruction (STCX) failed. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x4E050",
+    "EventName": "PM_STCX_PASS_FIN",
+    "BriefDescription": "Conditional store instruction (STCX) passed. LARX and STCX are instructions used to acquire a lock."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/marked.json b/tools/perf/pmu-events/arch/powerpc/power10/marked.json
new file mode 100644
index 000000000..58b5dfe3a
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/marked.json
@@ -0,0 +1,142 @@
+[
+  {
+    "EventCode": "0x1002C",
+    "EventName": "PM_LD_PREFETCH_CACHE_LINE_MISS",
+    "BriefDescription": "The L1 cache was reloaded with a line that fulfills a prefetch request."
+  },
+  {
+    "EventCode": "0x10132",
+    "EventName": "PM_MRK_INST_ISSUED",
+    "BriefDescription": "Marked instruction issued. Note that stores always get issued twice, the address gets issued to the LSU and the data gets issued to the VSU. Also, issues can sometimes get killed/cancelled and cause multiple sequential issues for the same instruction."
+  },
+  {
+    "EventCode": "0x101E0",
+    "EventName": "PM_MRK_INST_DISP",
+    "BriefDescription": "The thread has dispatched a randomly sampled marked instruction."
+  },
+  {
+    "EventCode": "0x101E2",
+    "EventName": "PM_MRK_BR_TAKEN_CMPL",
+    "BriefDescription": "Marked Branch Taken instruction completed."
+  },
+  {
+    "EventCode": "0x20112",
+    "EventName": "PM_MRK_NTF_FIN",
+    "BriefDescription": "The marked instruction became the oldest in the pipeline before it finished. It excludes instructions that finish at dispatch."
+  },
+  {
+    "EventCode": "0x2C01C",
+    "EventName": "PM_EXEC_STALL_DMISS_OFF_CHIP",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from a remote chip."
+  },
+  {
+    "EventCode": "0x20138",
+    "EventName": "PM_MRK_ST_NEST",
+    "BriefDescription": "A store has been sampled/marked and is at the point of execution where it has completed in the core and can no longer be flushed. At this point the store is sent to the L2."
+  },
+  {
+    "EventCode": "0x2013A",
+    "EventName": "PM_MRK_BRU_FIN",
+    "BriefDescription": "Marked Branch instruction finished."
+  },
+  {
+    "EventCode": "0x2C144",
+    "EventName": "PM_MRK_XFER_FROM_SRC_CYC_PMC2",
+    "BriefDescription": "Cycles taken for a marked demand miss to reload a line from the source specified in MMCR3[15:27]."
+  },
+  {
+    "EventCode": "0x24156",
+    "EventName": "PM_MRK_STCX_FIN",
+    "BriefDescription": "Marked conditional store instruction (STCX) finished. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x24158",
+    "EventName": "PM_MRK_INST",
+    "BriefDescription": "An instruction was marked. Includes both Random Instruction Sampling (RIS) at decode time and Random Event Sampling (RES) at the time the configured event happens."
+  },
+  {
+    "EventCode": "0x2415C",
+    "EventName": "PM_MRK_BR_CMPL",
+    "BriefDescription": "A marked branch completed. All branches are included."
+  },
+  {
+    "EventCode": "0x200FD",
+    "EventName": "PM_L1_ICACHE_MISS",
+    "BriefDescription": "Demand iCache Miss."
+  },
+  {
+    "EventCode": "0x30130",
+    "EventName": "PM_MRK_INST_FIN",
+    "BriefDescription": "marked instruction finished. Excludes instructions that finish at dispatch. Note that stores always finish twice since the address gets issued to the LSU and the data gets issued to the VSU."
+  },
+  {
+    "EventCode": "0x34146",
+    "EventName": "PM_MRK_LD_CMPL",
+    "BriefDescription": "Marked loads completed."
+  },
+  {
+    "EventCode": "0x3E158",
+    "EventName": "PM_MRK_STCX_FAIL",
+    "BriefDescription": "Marked conditional store instruction (STCX) failed. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x3E15A",
+    "EventName": "PM_MRK_ST_FIN",
+    "BriefDescription": "The marked instruction was a store of any kind."
+  },
+  {
+    "EventCode": "0x30068",
+    "EventName": "PM_L1_ICACHE_RELOADED_PREF",
+    "BriefDescription": "Counts all Icache prefetch reloads ( includes demand turned into prefetch)."
+  },
+  {
+    "EventCode": "0x301E4",
+    "EventName": "PM_MRK_BR_MPRED_CMPL",
+    "BriefDescription": "Marked Branch Mispredicted. Includes direction and target."
+  },
+  {
+    "EventCode": "0x300F6",
+    "EventName": "PM_LD_DEMAND_MISS_L1",
+    "BriefDescription": "The L1 cache was reloaded with a line that fulfills a demand miss request. Counted at reload time, before finish."
+  },
+  {
+    "EventCode": "0x300FE",
+    "EventName": "PM_DATA_FROM_L3MISS",
+    "BriefDescription": "The processor's data cache was reloaded from a source other than the local core's L1, L2, or L3 due to a demand miss."
+  },
+  {
+    "EventCode": "0x40012",
+    "EventName": "PM_L1_ICACHE_RELOADED_ALL",
+    "BriefDescription": "Counts all Icache reloads includes demand, prefetch, prefetch turned into demand and demand turned into prefetch."
+  },
+  {
+    "EventCode": "0x40134",
+    "EventName": "PM_MRK_INST_TIMEO",
+    "BriefDescription": "Marked instruction finish timeout (instruction was lost)."
+  },
+  {
+    "EventCode": "0x4505A",
+    "EventName": "PM_SP_FLOP_CMPL",
+    "BriefDescription": "Single Precision floating point instructions completed."
+  },
+  {
+    "EventCode": "0x4D058",
+    "EventName": "PM_VECTOR_FLOP_CMPL",
+    "BriefDescription": "Vector floating point instructions completed."
+  },
+  {
+    "EventCode": "0x4D05A",
+    "EventName": "PM_NON_MATH_FLOP_CMPL",
+    "BriefDescription": "Non Math instructions completed."
+  },
+  {
+    "EventCode": "0x401E0",
+    "EventName": "PM_MRK_INST_CMPL",
+    "BriefDescription": "marked instruction completed."
+  },
+  {
+    "EventCode": "0x400FE",
+    "EventName": "PM_DATA_FROM_MEMORY",
+    "BriefDescription": "The processor's data cache was reloaded from local, remote, or distant memory due to a demand miss."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/memory.json b/tools/perf/pmu-events/arch/powerpc/power10/memory.json
new file mode 100644
index 000000000..843b51f53
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/memory.json
@@ -0,0 +1,187 @@
+[
+  {
+    "EventCode": "0x1000A",
+    "EventName": "PM_PMC3_REWIND",
+    "BriefDescription": "The speculative event selected for PMC3 rewinds and the counter for PMC3 is not charged."
+  },
+  {
+    "EventCode": "0x1C040",
+    "EventName": "PM_XFER_FROM_SRC_PMC1",
+    "BriefDescription": "The processor's L1 data cache was reloaded from the source specified in MMCR3[0:12]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x1C142",
+    "EventName": "PM_MRK_XFER_FROM_SRC_PMC1",
+    "BriefDescription": "For a marked data transfer instruction, the processor's L1 data cache was reloaded from the source specified in MMCR3[0:12]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x1C144",
+    "EventName": "PM_MRK_XFER_FROM_SRC_CYC_PMC1",
+    "BriefDescription": "Cycles taken for a marked demand miss to reload a line from the source specified in MMCR3[0:12]."
+  },
+  {
+    "EventCode": "0x1C056",
+    "EventName": "PM_DERAT_MISS_4K",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 4K. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x1C058",
+    "EventName": "PM_DTLB_MISS_16G",
+    "BriefDescription": "Data TLB reload (after a miss) page size 16G. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x1C05C",
+    "EventName": "PM_DTLB_MISS_2M",
+    "BriefDescription": "Data TLB reload (after a miss) page size 2M. Implies radix translation was used. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x1E056",
+    "EventName": "PM_EXEC_STALL_STORE_PIPE",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was executing in the store unit. This does not include cycles spent handling store misses, PTESYNC instructions or TLBIE instructions."
+  },
+  {
+    "EventCode": "0x1F150",
+    "EventName": "PM_MRK_ST_L2_CYC",
+    "BriefDescription": "Cycles from L2 RC dispatch to L2 RC completion."
+  },
+  {
+    "EventCode": "0x10062",
+    "EventName": "PM_LD_L3MISS_PEND_CYC",
+    "BriefDescription": "Cycles L3 miss was pending for this thread."
+  },
+  {
+    "EventCode": "0x20010",
+    "EventName": "PM_PMC1_OVERFLOW",
+    "BriefDescription": "The event selected for PMC1 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x2001A",
+    "EventName": "PM_ITLB_HIT",
+    "BriefDescription": "The PTE required to translate the instruction address was resident in the TLB (instruction TLB access/IERAT reload). Applies to both HPT and RPT. When MMCR1[17]=0 this event counts only for demand misses. When MMCR1[17]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x2003E",
+    "EventName": "PM_PTESYNC_FIN",
+    "BriefDescription": "Ptesync instruction finished in the store unit. Only one ptesync can finish at a time."
+  },
+  {
+    "EventCode": "0x2C040",
+    "EventName": "PM_XFER_FROM_SRC_PMC2",
+    "BriefDescription": "The processor's L1 data cache was reloaded from the source specified in MMCR3[15:27]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x2C054",
+    "EventName": "PM_DERAT_MISS_64K",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 64K. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x2C056",
+    "EventName": "PM_DTLB_MISS_4K",
+    "BriefDescription": "Data TLB reload (after a miss) page size 4K. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x2D154",
+    "EventName": "PM_MRK_DERAT_MISS_64K",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 64K for a marked instruction. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x200F6",
+    "EventName": "PM_DERAT_MISS",
+    "BriefDescription": "DERAT Reloaded to satisfy a DERAT miss. All page sizes are counted by this event. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x30016",
+    "EventName": "PM_EXEC_STALL_DERAT_DTLB_MISS",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline suffered a TLB miss and waited for it resolve."
+  },
+  {
+    "EventCode": "0x3C040",
+    "EventName": "PM_XFER_FROM_SRC_PMC3",
+    "BriefDescription": "The processor's L1 data cache was reloaded from the source specified in MMCR3[30:42]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x3C142",
+    "EventName": "PM_MRK_XFER_FROM_SRC_PMC3",
+    "BriefDescription": "For a marked data transfer instruction, the processor's L1 data cache was reloaded from the source specified in MMCR3[30:42]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x3C144",
+    "EventName": "PM_MRK_XFER_FROM_SRC_CYC_PMC3",
+    "BriefDescription": "Cycles taken for a marked demand miss to reload a line from the source specified in MMCR3[30:42]."
+  },
+  {
+    "EventCode": "0x3C054",
+    "EventName": "PM_DERAT_MISS_16M",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 16M. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x3C056",
+    "EventName": "PM_DTLB_MISS_64K",
+    "BriefDescription": "Data TLB reload (after a miss) page size 64K. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x3C058",
+    "EventName": "PM_LARX_FIN",
+    "BriefDescription": "Load and reserve instruction (LARX) finished. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x301E2",
+    "EventName": "PM_MRK_ST_CMPL",
+    "BriefDescription": "Marked store completed and sent to nest. Note that this count excludes cache-inhibited stores."
+  },
+  {
+    "EventCode": "0x300FC",
+    "EventName": "PM_DTLB_MISS",
+    "BriefDescription": "The DPTEG required for the load/store instruction in execution was missing from the TLB. It includes pages of all sizes for demand and prefetch activity."
+  },
+  {
+    "EventCode": "0x4D02C",
+    "EventName": "PM_PMC1_REWIND",
+    "BriefDescription": "The speculative event selected for PMC1 rewinds and the counter for PMC1 is not charged."
+  },
+  {
+    "EventCode": "0x4003E",
+    "EventName": "PM_LD_CMPL",
+    "BriefDescription": "Loads completed."
+  },
+  {
+    "EventCode": "0x4C040",
+    "EventName": "PM_XFER_FROM_SRC_PMC4",
+    "BriefDescription": "The processor's L1 data cache was reloaded from the source specified in MMCR3[45:57]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x4C142",
+    "EventName": "PM_MRK_XFER_FROM_SRC_PMC4",
+    "BriefDescription": "For a marked data transfer instruction, the processor's L1 data cache was reloaded from the source specified in MMCR3[45:57]. If MMCR1[16|17] is 0 (default), this count includes only lines that were reloaded to satisfy a demand miss. If MMCR1[16|17] is 1, this count includes both demand misses and prefetch reloads."
+  },
+  {
+    "EventCode": "0x4C144",
+    "EventName": "PM_MRK_XFER_FROM_SRC_CYC_PMC4",
+    "BriefDescription": "Cycles taken for a marked demand miss to reload a line from the source specified in MMCR3[45:57]."
+  },
+  {
+    "EventCode": "0x4C056",
+    "EventName": "PM_DTLB_MISS_16M",
+    "BriefDescription": "Data TLB reload (after a miss) page size 16M. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x4C05A",
+    "EventName": "PM_DTLB_MISS_1G",
+    "BriefDescription": "Data TLB reload (after a miss) page size 1G. Implies radix translation was used. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x4C15E",
+    "EventName": "PM_MRK_DTLB_MISS_64K",
+    "BriefDescription": "Marked Data TLB reload (after a miss) page size 64K. When MMCR1[16]=0 this event counts only for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x4D056",
+    "EventName": "PM_NON_FMA_FLOP_CMPL",
+    "BriefDescription": "Non FMA instruction completed."
+  },
+  {
+    "EventCode": "0x40164",
+    "EventName": "PM_MRK_DERAT_MISS_2M",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 2M for a marked instruction. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
new file mode 100644
index 000000000..b57526fa4
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
@@ -0,0 +1,676 @@
+[
+    {
+        "BriefDescription": "Percentage of cycles that are run cycles",
+        "MetricExpr": "PM_RUN_CYC / PM_CYC * 100",
+        "MetricGroup": "General",
+        "MetricName": "RUN_CYCLES_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction",
+        "MetricExpr": "PM_CYC / PM_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "CYCLES_PER_INSTRUCTION"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled for any reason",
+        "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because there was a flush",
+        "MetricExpr": "PM_DISP_STALL_FLUSH / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_FLUSH_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because the MMU was handling a translation miss",
+        "MetricExpr": "PM_DISP_STALL_TRANSLATION / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_TRANSLATION_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled waiting to resolve an instruction ERAT miss",
+        "MetricExpr": "PM_DISP_STALL_IERAT_ONLY_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_IERAT_ONLY_MISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled waiting to resolve an instruction TLB miss",
+        "MetricExpr": "PM_DISP_STALL_ITLB_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_ITLB_MISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to an icache miss",
+        "MetricExpr": "PM_DISP_STALL_IC_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_IC_MISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from the local L2",
+        "MetricExpr": "PM_DISP_STALL_IC_L2 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_IC_L2_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from the local L3",
+        "MetricExpr": "PM_DISP_STALL_IC_L3 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_IC_L3_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from any source beyond the local L3",
+        "MetricExpr": "PM_DISP_STALL_IC_L3MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_IC_L3MISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to an icache miss after a branch mispredict",
+        "MetricExpr": "PM_DISP_STALL_BR_MPRED_ICMISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_BR_MPRED_ICMISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from the local L2 after suffering a branch mispredict",
+        "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L2 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_BR_MPRED_IC_L2_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from the local L3 after suffering a branch mispredict",
+        "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_BR_MPRED_IC_L3_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from any source beyond the local L3 after suffering a branch mispredict",
+        "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_BR_MPRED_IC_L3MISS_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to a branch mispredict",
+        "MetricExpr": "PM_DISP_STALL_BR_MPRED / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_BR_MPRED_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch for any reason",
+        "MetricExpr": "PM_DISP_STALL_HELD_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because of a synchronizing instruction that requires the ICT to be empty before dispatch",
+        "MetricExpr": "PM_DISP_STALL_HELD_SYNC_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISP_HELD_STALL_SYNC_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch while waiting on the scoreboard",
+        "MetricExpr": "PM_DISP_STALL_HELD_SCOREBOARD_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISP_HELD_STALL_SCOREBOARD_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch due to issue queue full",
+        "MetricExpr": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISP_HELD_STALL_ISSQ_FULL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the mapper/SRB was full",
+        "MetricExpr": "PM_DISP_STALL_HELD_RENAME_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_RENAME_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the STF mapper/SRB was full",
+        "MetricExpr": "PM_DISP_STALL_HELD_STF_MAPPER_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_STF_MAPPER_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the XVFC mapper/SRB was full",
+        "MetricExpr": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_XVFC_MAPPER_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch for any other reason",
+        "MetricExpr": "PM_DISP_STALL_HELD_OTHER_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_OTHER_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction has been dispatched but not issued for any reason",
+        "MetricExpr": "PM_ISSUE_STALL / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "ISSUE_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting to be finished in one of the execution units",
+        "MetricExpr": "PM_EXEC_STALL / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "EXECUTION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction spent executing an NTC instruction that gets flushed some time after dispatch",
+        "MetricExpr": "PM_EXEC_STALL_NTC_FLUSH / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "NTC_FLUSH_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTF instruction finishes at dispatch",
+        "MetricExpr": "PM_EXEC_STALL_FIN_AT_DISP / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "FIN_AT_DISP_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the branch unit",
+        "MetricExpr": "PM_EXEC_STALL_BRU / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "BRU_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a simple fixed point instruction that is executing in the LSU",
+        "MetricExpr": "PM_EXEC_STALL_SIMPLE_FX / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "SIMPLE_FX_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the VSU",
+        "MetricExpr": "PM_EXEC_STALL_VSU / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "VSU_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting to be finished in one of the execution units",
+        "MetricExpr": "PM_EXEC_STALL_TRANSLATION / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "TRANSLATION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a load or store that suffered a translation miss",
+        "MetricExpr": "PM_EXEC_STALL_DERAT_ONLY_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DERAT_ONLY_MISS_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is recovering from a TLB miss",
+        "MetricExpr": "PM_EXEC_STALL_DERAT_DTLB_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DERAT_DTLB_MISS_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the LSU",
+        "MetricExpr": "PM_EXEC_STALL_LSU / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "LSU_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a load that is executing in the LSU",
+        "MetricExpr": "PM_EXEC_STALL_LOAD / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "LOAD_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_L2L3_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, with an RC dispatch conflict",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_L2L3_CONFLICT_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, without an RC dispatch conflict",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_L2L3_NOCONFLICT_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a source beyond the local L2 and local L3",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_L3MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_L3MISS_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a neighbor chiplet's L2 or L3 in the same chip",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_L21_L31 / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_L21_L31_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from L4, local memory or OpenCAPI chip",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_LMEM / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_LMEM_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a remote chip (cache, L4, memory or OpenCAPI) in the same group",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_CHIP / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_OFF_CHIP_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a distant chip (cache, L4, memory or OpenCAPI chip)",
+        "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_NODE / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DMISS_OFF_NODE_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing a TLBIEL instruction",
+        "MetricExpr": "PM_EXEC_STALL_TLBIEL / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "TLBIEL_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is finishing a load after its data has been reloaded from a data source beyond the local L1, OR when the LSU is processing an L1-hit, OR when the NTF instruction merged with another load in the LMQ",
+        "MetricExpr": "PM_EXEC_STALL_LOAD_FINISH / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "LOAD_FINISH_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a store that is executing in the LSU",
+        "MetricExpr": "PM_EXEC_STALL_STORE / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "STORE_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is in the store unit outside of handling store misses or other special store operations",
+        "MetricExpr": "PM_EXEC_STALL_STORE_PIPE / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "STORE_PIPE_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a store whose cache line was not resident in the L1 and had to wait for allocation of the missing line into the L1",
+        "MetricExpr": "PM_EXEC_STALL_STORE_MISS / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "STORE_MISS_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a TLBIE instruction waiting for a response from the L2",
+        "MetricExpr": "PM_EXEC_STALL_TLBIE / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "TLBIE_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing a PTESYNC instruction",
+        "MetricExpr": "PM_EXEC_STALL_PTESYNC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "PTESYNC_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction cannot complete because the thread was blocked",
+        "MetricExpr": "PM_CMPL_STALL / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction cannot complete because it was interrupted by ANY exception",
+        "MetricExpr": "PM_CMPL_STALL_EXCEPTION / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "EXCEPTION_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is stuck at finish waiting for the non-speculative finish of either a STCX instruction waiting for its result or a load waiting for non-critical sectors of data and ECC",
+        "MetricExpr": "PM_CMPL_STALL_MEM_ECC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "MEM_ECC_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a STCX instruction waiting for resolution from the nest",
+        "MetricExpr": "PM_CMPL_STALL_STCX / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "STCX_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a LWSYNC instruction waiting to complete",
+        "MetricExpr": "PM_CMPL_STALL_LWSYNC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "LWSYNC_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a HWSYNC instruction stuck at finish waiting for a response from the L2",
+        "MetricExpr": "PM_CMPL_STALL_HWSYNC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "HWSYNC_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction required special handling before completion",
+        "MetricExpr": "PM_CMPL_STALL_SPECIAL / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "SPECIAL_COMPLETION_STALL_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because fetch was being held, so there was nothing in the pipeline for this thread",
+        "MetricExpr": "PM_DISP_STALL_FETCH / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_FETCH_CPI"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because of power management",
+        "MetricExpr": "PM_DISP_STALL_HELD_HALT_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "CPI",
+        "MetricName": "DISPATCHED_HELD_HALT_CPI"
+    },
+    {
+        "BriefDescription": "Percentage of flushes per completed instruction",
+        "MetricExpr": "PM_FLUSH / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Others",
+        "MetricName": "FLUSH_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of flushes due to a branch mispredict per completed instruction",
+        "MetricExpr": "PM_FLUSH_MPRED / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Others",
+        "MetricName": "BR_MPRED_FLUSH_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of branch mispredictions per completed instruction",
+        "MetricExpr": "PM_BR_MPRED_CMPL / PM_RUN_INST_CMPL",
+        "MetricGroup": "Others",
+        "MetricName": "BRANCH_MISPREDICTION_RATE"
+    },
+    {
+        "BriefDescription": "Percentage of finished loads that missed in the L1",
+        "MetricExpr": "PM_LD_MISS_L1 / PM_LD_REF_L1 * 100",
+        "MetricGroup": "Others",
+        "MetricName": "L1_LD_MISS_RATIO",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions that were loads that missed the L1",
+        "MetricExpr": "PM_LD_MISS_L1 / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Others",
+        "MetricName": "L1_LD_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions when the DPTEG required for the load/store instruction in execution was missing from the TLB",
+        "MetricExpr": "PM_DTLB_MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Others",
+        "MetricName": "DTLB_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of completed instructions dispatched per instruction completed",
+        "MetricExpr": "PM_INST_DISP / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "DISPATCH_PER_INST_CMPL"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions that were a demand load that did not hit in the L1 or L2",
+        "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "General",
+        "MetricName": "L2_LD_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions that were demand fetches that missed the L1 icache",
+        "MetricExpr": "PM_L1_ICACHE_MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Instruction_Misses",
+        "MetricName": "L1_INST_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions that were demand fetches that reloaded from beyond the L3 icache",
+        "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "General",
+        "MetricName": "L3_INST_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of completed instructions per cycle",
+        "MetricExpr": "PM_INST_CMPL / PM_CYC",
+        "MetricGroup": "General",
+        "MetricName": "IPC"
+    },
+    {
+        "BriefDescription": "Average number of cycles per completed instruction group",
+        "MetricExpr": "PM_CYC / PM_1PLUS_PPC_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "CYCLES_PER_COMPLETED_INSTRUCTIONS_SET"
+    },
+    {
+        "BriefDescription": "Percentage of cycles when at least 1 instruction dispatched",
+        "MetricExpr": "PM_1PLUS_PPC_DISP / PM_RUN_CYC * 100",
+        "MetricGroup": "General",
+        "MetricName": "CYCLES_ATLEAST_ONE_INST_DISPATCHED",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of finished loads per completed instruction",
+        "MetricExpr": "PM_LD_REF_L1 / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "LOADS_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of finished stores per completed instruction",
+        "MetricExpr": "PM_ST_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "STORES_PER_INST"
+    },
+    {
+        "BriefDescription": "Percentage of demand loads that reloaded from beyond the L2 per completed instruction",
+        "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "dL1_Reloads",
+        "MetricName": "DL1_RELOAD_FROM_L2_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of demand loads that reloaded from beyond the L3 per completed instruction",
+        "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "dL1_Reloads",
+        "MetricName": "DL1_RELOAD_FROM_L3_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses with 4k page size per completed instruction",
+        "MetricExpr": "PM_DERAT_MISS_4K / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_4K_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses with 64k page size per completed instruction",
+        "MetricExpr": "PM_DERAT_MISS_64K / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_64K_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of run cycles per completed instruction",
+        "MetricExpr": "PM_RUN_CYC / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "RUN_CPI"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses per completed instruction",
+        "MetricExpr": "PM_DERAT_MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of completed instructions per run cycle",
+        "MetricExpr": "PM_RUN_INST_CMPL / PM_RUN_CYC",
+        "MetricGroup": "General",
+        "MetricName": "RUN_IPC"
+    },
+    {
+        "BriefDescription": "Average number of completed instructions per instruction group",
+        "MetricExpr": "PM_RUN_INST_CMPL / PM_1PLUS_PPC_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "AVERAGE_COMPLETED_INSTRUCTION_SET_SIZE"
+    },
+    {
+        "BriefDescription": "Average number of finished instructions per completed instructions",
+        "MetricExpr": "PM_INST_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "INST_FIN_PER_CMPL"
+    },
+    {
+        "BriefDescription": "Average cycles per completed instruction when the NTF instruction is completing and the finish was overlooked",
+        "MetricExpr": "PM_EXEC_STALL_UNKNOWN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "EXEC_STALL_UNKOWN_CPI"
+    },
+    {
+        "BriefDescription": "Percentage of finished branches that were taken",
+        "MetricExpr": "PM_BR_TAKEN_CMPL / PM_BR_FIN * 100",
+        "MetricGroup": "General",
+        "MetricName": "TAKEN_BRANCHES",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of completed instructions that were a demand load that did not hit in the L1, L2, or the L3",
+        "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "General",
+        "MetricName": "L3_LD_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Average number of finished branches per completed instruction",
+        "MetricExpr": "PM_BR_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "BRANCHES_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of instructions finished in the LSU per completed instruction",
+        "MetricExpr": "PM_LSU_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "LSU_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of instructions finished in the VSU per completed instruction",
+        "MetricExpr": "PM_VSU_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "VSU_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of TLBIE instructions finished in the LSU per completed instruction",
+        "MetricExpr": "PM_TLBIE_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "TLBIE_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of STCX instructions finshed per completed instruction",
+        "MetricExpr": "PM_STCX_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "STXC_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of LARX instructions finshed per completed instruction",
+        "MetricExpr": "PM_LARX_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "LARX_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of PTESYNC instructions finshed per completed instruction",
+        "MetricExpr": "PM_PTESYNC_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "PTESYNC_PER_INST"
+    },
+    {
+        "BriefDescription": "Average number of simple fixed-point instructions finshed in the store unit per completed instruction",
+        "MetricExpr": "PM_FX_LSU_FIN / PM_RUN_INST_CMPL",
+        "MetricGroup": "General",
+        "MetricName": "FX_PER_INST"
+    },
+    {
+        "BriefDescription": "Percentage of demand load misses that reloaded the L1 cache",
+        "MetricExpr": "PM_LD_DEMAND_MISS_L1 / PM_LD_MISS_L1 * 100",
+        "MetricGroup": "General",
+        "MetricName": "DL1_MISS_RELOADS",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L2",
+        "MetricExpr": "PM_DATA_FROM_L2MISS / PM_LD_DEMAND_MISS_L1 * 100",
+        "MetricGroup": "dL1_Reloads",
+        "MetricName": "DL1_RELOAD_FROM_L2_MISS",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L3",
+        "MetricExpr": "PM_DATA_FROM_L3MISS / PM_LD_DEMAND_MISS_L1 * 100",
+        "MetricGroup": "dL1_Reloads",
+        "MetricName": "DL1_RELOAD_FROM_L3_MISS",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of cycles stalled due to the NTC instruction waiting for a load miss to resolve from a source beyond the local L2 and local L3",
+        "MetricExpr": "DMISS_L3MISS_STALL_CPI / RUN_CPI * 100",
+        "MetricGroup": "General",
+        "MetricName": "DCACHE_MISS_CPI",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses with 2M page size per completed instruction",
+        "MetricExpr": "PM_DERAT_MISS_2M / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_2M_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses with 16M page size per completed instruction",
+        "MetricExpr": "PM_DERAT_MISS_16M / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_16M_MISS_RATE",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "DERAT miss ratio for 4K page size",
+        "MetricExpr": "PM_DERAT_MISS_4K / PM_DERAT_MISS",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_4K_MISS_RATIO"
+    },
+    {
+        "BriefDescription": "DERAT miss ratio for 2M page size",
+        "MetricExpr": "PM_DERAT_MISS_2M / PM_DERAT_MISS",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_2M_MISS_RATIO"
+    },
+    {
+        "BriefDescription": "DERAT miss ratio for 16M page size",
+        "MetricExpr": "PM_DERAT_MISS_16M / PM_DERAT_MISS",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_16M_MISS_RATIO"
+    },
+    {
+        "BriefDescription": "DERAT miss ratio for 64K page size",
+        "MetricExpr": "PM_DERAT_MISS_64K / PM_DERAT_MISS",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_64K_MISS_RATIO"
+    },
+    {
+        "BriefDescription": "Percentage of DERAT misses that resulted in TLB reloads",
+        "MetricExpr": "PM_DTLB_MISS / PM_DERAT_MISS * 100",
+        "MetricGroup": "Translation",
+        "MetricName": "DERAT_MISS_RELOAD",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of icache misses that were reloaded from beyond the local L3",
+        "MetricExpr": "PM_INST_FROM_L3MISS / PM_L1_ICACHE_MISS * 100",
+        "MetricGroup": "Instruction_Misses",
+        "MetricName": "INST_FROM_L3_MISS",
+        "ScaleUnit": "1%"
+    },
+    {
+        "BriefDescription": "Percentage of icache reloads from the beyond the L3 per completed instruction",
+        "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
+        "MetricGroup": "Instruction_Misses",
+        "MetricName": "INST_FROM_L3_MISS_RATE",
+        "ScaleUnit": "1%"
+    }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
new file mode 100644
index 000000000..fe050d443
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
@@ -0,0 +1,424 @@
+[
+    {
+      "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "LOCAL_NODE_PUMP_RETRY_RATIO_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_LNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_LNS_PUMP01\\,chip\\=?@) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "LOCAL_NODE_PUMP_RETRY_RATIO_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_LNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_LNS_PUMP23\\,chip\\=?@) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "GROUP_PUMP_RETRY_RATIO_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_GROUP_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_GROUP_PUMP01\\,chip\\=?@) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "GROUP_PUMP_RETRY_RATIO_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_GROUP_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_GROUP_PUMP23\\,chip\\=?@) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_GROUP_PUMPS_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_GROUP_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_GROUP_PUMPS_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_GROUP_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_GROUP_PUMPS_RETRIES_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_GROUP_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_GROUP_PUMPS_RETRIES_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_GROUP_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_VECTOR_GROUP_PUMPS_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_VECTOR_GROUP_PUMPS_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_LOCAL_NODE_PUMPS_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_LNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_LOCAL_NODE_PUMPS_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_LNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_VECTOR_GROUP_PUMPS_RETRIES_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_VECTOR_GROUP_PUMPS_RETRIES_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_LNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_LOCAL_NODE_PUMPS_RETRIES_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_LNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_REMOTE_NODE_PUMPS_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_REMOTE_NODE_PUMPS_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_NEAR_NODE_PUMPS_P01",
+      "MetricExpr": "(hv_24x7@PM_PB_NNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_NEAR_NODE_PUMPS_P23",
+      "MetricExpr": "(hv_24x7@PM_PB_NNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PAU_CYC\\,chip\\=?@)",
+      "ScaleUnit": "4",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_INT_PB_BW",
+      "MetricExpr": "(hv_24x7@PM_PB_INT_DATA_XFER\\,chip\\=?@)",
+      "ScaleUnit": "2.09MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK0_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK1_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK2_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK3_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK4_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK5_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK6_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK7_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK0_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK1_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK2_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK3_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK4_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK5_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK6_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "XLINK7_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK0_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK1_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK2_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK3_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK4_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK5_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK6_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK7_OUT_TOTAL_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK0_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK1_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK2_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK3_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK4_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK5_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK6_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "ALINK7_OUT_DATA_UTILIZATION",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "ScaleUnit": "1.063%",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_DATA_BANDWIDTH_TRANSFERRED_OVER_PB_PCI1",
+      "MetricExpr": "(hv_24x7@PM_PCI1_32B_INOUT\\,chip\\=?@)",
+      "ScaleUnit": "3.28e-2MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_DATA_BANDWIDTH_TRANSFERRED_OVER_PB_PCI0",
+      "MetricExpr": "(hv_24x7@PM_PCI0_32B_INOUT\\,chip\\=?@)",
+      "ScaleUnit": "3.28e-2MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_READ_BW_MC0_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC0_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "5.24e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_READ_BW_MC1_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC1_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "5.24e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_READ_BW_MC2_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC2_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "5.24e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_READ_BW_MC3_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC3_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "5.24e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_WRITE_BW_MC0_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC0_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "2.6e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_WRITE_BW_MC1_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC1_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "2.6e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_WRITE_BW_MC2_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC2_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "2.6e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "TOTAL_MCS_WRITE_BW_MC3_CHAN01",
+      "MetricExpr": "(hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC3_CHAN01\\,chip\\=?@)",
+      "ScaleUnit": "2.6e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "Memory_RD_BW_Chip",
+      "MetricExpr": "(hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC0_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC1_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC2_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_128B_RD_DATA_BLOCKS_MC3_CHAN01\\,chip\\=?@)",
+      "MetricGroup": "Memory_BW",
+      "ScaleUnit": "5.24e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "Memory_WR_BW_Chip",
+      "MetricExpr": "(hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC0_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC1_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC2_CHAN01\\,chip\\=?@ + hv_24x7@PM_MCS_64B_WR_DATA_BLOCKS_MC3_CHAN01\\,chip\\=?@ )",
+      "MetricGroup": "Memory_BW",
+      "ScaleUnit": "2.6e-1MB",
+      "AggregationMode": "PerChip"
+    },
+    {
+      "MetricName": "PowerBUS_Frequency",
+      "MetricExpr": "(hv_24x7@PM_PAU_CYC\\,chip\\=?@ )",
+      "ScaleUnit": "2.56e-7GHz",
+      "AggregationMode": "PerChip"
+    }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/others.json b/tools/perf/pmu-events/arch/powerpc/power10/others.json
new file mode 100644
index 000000000..7d0de1a28
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/others.json
@@ -0,0 +1,272 @@
+[
+  {
+    "EventCode": "0x10016",
+    "EventName": "PM_VSU0_ISSUE",
+    "BriefDescription": "VSU instructions issued to VSU pipe 0."
+  },
+  {
+    "EventCode": "0x1001C",
+    "EventName": "PM_ULTRAVISOR_INST_CMPL",
+    "BriefDescription": "PowerPC instructions that completed while the thread was in ultravisor state."
+  },
+  {
+    "EventCode": "0x100F0",
+    "EventName": "PM_CYC",
+    "BriefDescription": "Processor cycles."
+  },
+  {
+    "EventCode": "0x10134",
+    "EventName": "PM_MRK_ST_DONE_L2",
+    "BriefDescription": "Marked stores completed in L2 (RC machine done)."
+  },
+  {
+    "EventCode": "0x1505E",
+    "EventName": "PM_LD_HIT_L1",
+    "BriefDescription": "Loads that finished without experiencing an L1 miss."
+  },
+  {
+    "EventCode": "0x1F056",
+    "EventName": "PM_DISP_SS0_2_INSTR_CYC",
+    "BriefDescription": "Cycles in which Superslice 0 dispatches either 1 or 2 instructions."
+  },
+  {
+    "EventCode": "0x1F15C",
+    "EventName": "PM_MRK_STCX_L2_CYC",
+    "BriefDescription": "Cycles spent in the nest portion of a marked Stcx instruction. It starts counting when the operation starts to drain to the L2 and it stops counting when the instruction retires from the Instruction Completion Table (ICT) in the Instruction Sequencing Unit (ISU)."
+  },
+  {
+    "EventCode": "0x10066",
+    "EventName": "PM_ADJUNCT_CYC",
+    "BriefDescription": "Cycles in which the thread is in Adjunct state. MSR[S HV PR] bits = 011."
+  },
+  {
+    "EventCode": "0x101E4",
+    "EventName": "PM_MRK_L1_ICACHE_MISS",
+    "BriefDescription": "Marked Instruction suffered an icache Miss."
+  },
+  {
+    "EventCode": "0x101EA",
+    "EventName": "PM_MRK_L1_RELOAD_VALID",
+    "BriefDescription": "Marked demand reload."
+  },
+  {
+    "EventCode": "0x100F4",
+    "EventName": "PM_FLOP_CMPL",
+    "BriefDescription": "Floating Point Operations Completed. Includes any type. It counts once for each 1, 2, 4 or 8 flop instruction. Use PM_1|2|4|8_FLOP_CMPL events to count flops."
+  },
+  {
+    "EventCode": "0x100FA",
+    "EventName": "PM_RUN_LATCH_ANY_THREAD_CYC",
+    "BriefDescription": "Cycles when at least one thread has the run latch set."
+  },
+  {
+    "EventCode": "0x100FC",
+    "EventName": "PM_LD_REF_L1",
+    "BriefDescription": "All L1 D cache load references counted at finish, gated by reject. In P9 and earlier this event counted only cacheable loads but in P10 both cacheable and non-cacheable loads are included."
+  },
+  {
+    "EventCode": "0x2000C",
+    "EventName": "PM_RUN_LATCH_ALL_THREADS_CYC",
+    "BriefDescription": "Cycles when the run latch is set for all threads."
+  },
+  {
+    "EventCode": "0x2E010",
+    "EventName": "PM_ADJUNCT_INST_CMPL",
+    "BriefDescription": "PowerPC instructions that completed while the thread is in Adjunct state."
+  },
+  {
+    "EventCode": "0x2E014",
+    "EventName": "PM_STCX_FIN",
+    "BriefDescription": "Conditional store instruction (STCX) finished. LARX and STCX are instructions used to acquire a lock."
+  },
+  {
+    "EventCode": "0x20130",
+    "EventName": "PM_MRK_INST_DECODED",
+    "BriefDescription": "An instruction was marked at decode time. Random Instruction Sampling (RIS) only."
+  },
+  {
+    "EventCode": "0x20132",
+    "EventName": "PM_MRK_DFU_ISSUE",
+    "BriefDescription": "The marked instruction was a decimal floating point operation issued to the VSU. Measured at issue time."
+  },
+  {
+    "EventCode": "0x20134",
+    "EventName": "PM_MRK_FXU_ISSUE",
+    "BriefDescription": "The marked instruction was a fixed point operation issued to the VSU. Measured at issue time."
+  },
+  {
+    "EventCode": "0x2505C",
+    "EventName": "PM_VSU_ISSUE",
+    "BriefDescription": "At least one VSU instruction was issued to one of the VSU pipes. Up to 4 per cycle. Includes fixed point operations."
+  },
+  {
+    "EventCode": "0x2F054",
+    "EventName": "PM_DISP_SS1_2_INSTR_CYC",
+    "BriefDescription": "Cycles in which Superslice 1 dispatches either 1 or 2 instructions."
+  },
+  {
+    "EventCode": "0x2F056",
+    "EventName": "PM_DISP_SS1_4_INSTR_CYC",
+    "BriefDescription": "Cycles in which Superslice 1 dispatches either 3 or 4 instructions."
+  },
+  {
+    "EventCode": "0x2006C",
+    "EventName": "PM_RUN_CYC_SMT4_MODE",
+    "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT4 mode."
+  },
+  {
+    "EventCode": "0x201E0",
+    "EventName": "PM_MRK_DATA_FROM_MEMORY",
+    "BriefDescription": "The processor's data cache was reloaded from local, remote, or distant memory due to a demand miss for a marked load."
+  },
+  {
+    "EventCode": "0x201E4",
+    "EventName": "PM_MRK_DATA_FROM_L3MISS",
+    "BriefDescription": "The processor's data cache was reloaded from a source other than the local core's L1, L2, or L3 due to a demand miss for a marked load."
+  },
+  {
+    "EventCode": "0x201E8",
+    "EventName": "PM_THRESH_EXC_512",
+    "BriefDescription": "Threshold counter exceeded a value of 512."
+  },
+  {
+    "EventCode": "0x200F2",
+    "EventName": "PM_INST_DISP",
+    "BriefDescription": "PowerPC instructions dispatched."
+  },
+  {
+    "EventCode": "0x30132",
+    "EventName": "PM_MRK_VSU_FIN",
+    "BriefDescription": "VSU marked instructions finished. Excludes simple FX instructions issued to the Store Unit."
+  },
+  {
+    "EventCode": "0x30038",
+    "EventName": "PM_EXEC_STALL_DMISS_LMEM",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from the local memory, local OpenCapp cache, or local OpenCapp memory."
+  },
+  {
+    "EventCode": "0x3F04A",
+    "EventName": "PM_LSU_ST5_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST2 port."
+  },
+  {
+    "EventCode": "0x3405A",
+    "EventName": "PM_PRIVILEGED_INST_CMPL",
+    "BriefDescription": "PowerPC Instructions that completed while the thread is in Privileged state."
+  },
+  {
+    "EventCode": "0x3F150",
+    "EventName": "PM_MRK_ST_DRAIN_CYC",
+    "BriefDescription": "cycles to drain st from core to L2."
+  },
+  {
+    "EventCode": "0x3F054",
+    "EventName": "PM_DISP_SS0_4_INSTR_CYC",
+    "BriefDescription": "Cycles in which Superslice 0 dispatches either 3 or 4 instructions."
+  },
+  {
+    "EventCode": "0x3F056",
+    "EventName": "PM_DISP_SS0_8_INSTR_CYC",
+    "BriefDescription": "Cycles in which Superslice 0 dispatches either 5, 6, 7 or 8 instructions."
+  },
+  {
+    "EventCode": "0x30162",
+    "EventName": "PM_MRK_ISSUE_DEPENDENT_LOAD",
+    "BriefDescription": "The marked instruction was dependent on a load. It is eligible for issue kill."
+  },
+  {
+    "EventCode": "0x40114",
+    "EventName": "PM_MRK_START_PROBE_NOP_DISP",
+    "BriefDescription": "Marked Start probe nop dispatched. Instruction AND R0,R0,R0."
+  },
+  {
+    "EventCode": "0x4001C",
+    "EventName": "PM_VSU_FIN",
+    "BriefDescription": "VSU instructions finished."
+  },
+  {
+    "EventCode": "0x4C01A",
+    "EventName": "PM_EXEC_STALL_DMISS_OFF_NODE",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from a distant chip."
+  },
+  {
+    "EventCode": "0x4D012",
+    "EventName": "PM_PMC3_SAVED",
+    "BriefDescription": "The conditions for the speculative event selected for PMC3 are met and PMC3 is charged."
+  },
+  {
+    "EventCode": "0x4D022",
+    "EventName": "PM_HYPERVISOR_INST_CMPL",
+    "BriefDescription": "PowerPC instructions that completed while the thread is in hypervisor state."
+  },
+  {
+    "EventCode": "0x4D026",
+    "EventName": "PM_ULTRAVISOR_CYC",
+    "BriefDescription": "Cycles when the thread is in Ultravisor state. MSR[S HV PR]=110."
+  },
+  {
+    "EventCode": "0x4D028",
+    "EventName": "PM_PRIVILEGED_CYC",
+    "BriefDescription": "Cycles when the thread is in Privileged state. MSR[S HV PR]=x00."
+  },
+  {
+    "EventCode": "0x40030",
+    "EventName": "PM_INST_FIN",
+    "BriefDescription": "Instructions finished."
+  },
+  {
+    "EventCode": "0x44146",
+    "EventName": "PM_MRK_STCX_CORE_CYC",
+    "BriefDescription": "Cycles spent in the core portion of a marked Stcx instruction. It starts counting when the instruction is decoded and stops counting when it drains into the L2."
+  },
+  {
+    "EventCode": "0x44054",
+    "EventName": "PM_VECTOR_LD_CMPL",
+    "BriefDescription": "Vector load instructions completed."
+  },
+  {
+    "EventCode": "0x45054",
+    "EventName": "PM_FMA_CMPL",
+    "BriefDescription": "Two floating point instructions completed (FMA class of instructions: fmadd, fnmadd, fmsub, fnmsub). Scalar instructions only."
+  },
+  {
+    "EventCode": "0x45056",
+    "EventName": "PM_SCALAR_FLOP_CMPL",
+    "BriefDescription": "Scalar floating point instructions completed."
+  },
+  {
+    "EventCode": "0x4505C",
+    "EventName": "PM_MATH_FLOP_CMPL",
+    "BriefDescription": "Math floating point instructions completed."
+  },
+  {
+    "EventCode": "0x4D05E",
+    "EventName": "PM_BR_CMPL",
+    "BriefDescription": "A branch completed. All branches are included."
+  },
+  {
+    "EventCode": "0x4E15E",
+    "EventName": "PM_MRK_INST_FLUSHED",
+    "BriefDescription": "The marked instruction was flushed."
+  },
+  {
+    "EventCode": "0x401E6",
+    "EventName": "PM_MRK_INST_FROM_L3MISS",
+    "BriefDescription": "The processor's instruction cache was reloaded from a source other than the local core's L1, L2, or L3 due to a demand miss for a marked instruction."
+  },
+  {
+    "EventCode": "0x401E8",
+    "EventName": "PM_MRK_DATA_FROM_L2MISS",
+    "BriefDescription": "The processor's data cache was reloaded from a source other than the local core's L1 or L2 due to a demand miss for a marked load."
+  },
+  {
+    "EventCode": "0x400F0",
+    "EventName": "PM_LD_DEMAND_MISS_L1_FIN",
+    "BriefDescription": "Load Missed L1, counted at finish time."
+  },
+  {
+    "EventCode": "0x400FA",
+    "EventName": "PM_RUN_INST_CMPL",
+    "BriefDescription": "Completed PowerPC instructions gated by the run latch."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/pipeline.json b/tools/perf/pmu-events/arch/powerpc/power10/pipeline.json
new file mode 100644
index 000000000..b8aded604
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/pipeline.json
@@ -0,0 +1,292 @@
+[
+  {
+    "EventCode": "0x100FE",
+    "EventName": "PM_INST_CMPL",
+    "BriefDescription": "PowerPC instructions completed."
+  },
+  {
+    "EventCode": "0x1000C",
+    "EventName": "PM_LSU_LD0_FIN",
+    "BriefDescription": "LSU Finished an internal operation in LD0 port."
+  },
+  {
+    "EventCode": "0x1000E",
+    "EventName": "PM_MMA_ISSUED",
+    "BriefDescription": "MMA instructions issued."
+  },
+  {
+    "EventCode": "0x10012",
+    "EventName": "PM_LSU_ST0_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST0 port."
+  },
+  {
+    "EventCode": "0x10014",
+    "EventName": "PM_LSU_ST4_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST4 port."
+  },
+  {
+    "EventCode": "0x10018",
+    "EventName": "PM_IC_DEMAND_CYC",
+    "BriefDescription": "Cycles in which an instruction reload is pending to satisfy a demand miss."
+  },
+  {
+    "EventCode": "0x10022",
+    "EventName": "PM_PMC2_SAVED",
+    "BriefDescription": "The conditions for the speculative event selected for PMC2 are met and PMC2 is charged."
+  },
+  {
+    "EventCode": "0x10024",
+    "EventName": "PM_PMC5_OVERFLOW",
+    "BriefDescription": "The event selected for PMC5 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x10058",
+    "EventName": "PM_EXEC_STALL_FIN_AT_DISP",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline finished at dispatch and did not require execution in the LSU, BRU or VSU."
+  },
+  {
+    "EventCode": "0x1005A",
+    "EventName": "PM_FLUSH_MPRED",
+    "BriefDescription": "A flush occurred due to a mispredicted branch. Includes target and direction."
+  },
+  {
+    "EventCode": "0x1C05A",
+    "EventName": "PM_DERAT_MISS_2M",
+    "BriefDescription": "Data ERAT Miss (Data TLB Access) page size 2M. Implies radix translation. When MMCR1[16]=0 this event counts only DERAT reloads for demand misses. When MMCR1[16]=1 this event includes demand misses and prefetches."
+  },
+  {
+    "EventCode": "0x1E05A",
+    "EventName": "PM_CMPL_STALL_LWSYNC",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a lwsync waiting to complete."
+  },
+  {
+    "EventCode": "0x10068",
+    "EventName": "PM_BR_FIN",
+    "BriefDescription": "A branch instruction finished. Includes predicted/mispredicted/unconditional."
+  },
+  {
+    "EventCode": "0x1006A",
+    "EventName": "PM_FX_LSU_FIN",
+    "BriefDescription": "Simple fixed point instruction issued to the store unit. Measured at finish time."
+  },
+  {
+    "EventCode": "0x1006C",
+    "EventName": "PM_RUN_CYC_ST_MODE",
+    "BriefDescription": "Cycles when the run latch is set and the core is in ST mode."
+  },
+  {
+    "EventCode": "0x20004",
+    "EventName": "PM_ISSUE_STALL",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was dispatched but not issued yet."
+  },
+  {
+    "EventCode": "0x2000A",
+    "EventName": "PM_HYPERVISOR_CYC",
+    "BriefDescription": "Cycles when the thread is in Hypervisor state. MSR[S HV PR]=010."
+  },
+  {
+    "EventCode": "0x2000E",
+    "EventName": "PM_LSU_LD1_FIN",
+    "BriefDescription": "LSU Finished an internal operation in LD1 port."
+  },
+  {
+    "EventCode": "0x2C014",
+    "EventName": "PM_CMPL_STALL_SPECIAL",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline required special handling before completing."
+  },
+  {
+    "EventCode": "0x2C018",
+    "EventName": "PM_EXEC_STALL_DMISS_L3MISS",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for a load miss to resolve from a source beyond the local L2 or local L3."
+  },
+  {
+    "EventCode": "0x2D010",
+    "EventName": "PM_LSU_ST1_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST1 port."
+  },
+  {
+    "EventCode": "0x2D012",
+    "EventName": "PM_VSU1_ISSUE",
+    "BriefDescription": "VSU instructions issued to VSU pipe 1."
+  },
+  {
+    "EventCode": "0x2D018",
+    "EventName": "PM_EXEC_STALL_VSU",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was executing in the VSU (includes FXU, VSU, CRU)."
+  },
+  {
+    "EventCode": "0x2D01C",
+    "EventName": "PM_CMPL_STALL_STCX",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a stcx waiting for resolution from the nest before completing."
+  },
+  {
+    "EventCode": "0x2E01E",
+    "EventName": "PM_EXEC_STALL_NTC_FLUSH",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was executing in any unit before it was flushed. Note that if the flush of the oldest instruction happens after finish, the cycles from dispatch to issue will be included in PM_DISP_STALL and the cycles from issue to finish will be included in PM_EXEC_STALL and its corresponding children. This event will also count cycles when the previous NTF instruction is still completing and the new NTF instruction is stalled at dispatch."
+  },
+  {
+    "EventCode": "0x2013C",
+    "EventName": "PM_MRK_FX_LSU_FIN",
+    "BriefDescription": "The marked instruction was simple fixed point that was issued to the store unit. Measured at finish time."
+  },
+  {
+    "EventCode": "0x2405A",
+    "EventName": "PM_NTC_FIN",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline (NTC) finishes. Note that instructions can finish out of order, therefore not all the instructions that finish have a Next-to-complete status."
+  },
+  {
+    "EventCode": "0x201E2",
+    "EventName": "PM_MRK_LD_MISS_L1",
+    "BriefDescription": "Marked DL1 Demand Miss counted at finish time."
+  },
+  {
+    "EventCode": "0x200F4",
+    "EventName": "PM_RUN_CYC",
+    "BriefDescription": "Processor cycles gated by the run latch."
+  },
+  {
+    "EventCode": "0x30008",
+    "EventName": "PM_EXEC_STALL",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting to finish in one of the execution units (BRU, LSU, VSU). Only cycles between issue and finish are counted in this category."
+  },
+  {
+    "EventCode": "0x3001A",
+    "EventName": "PM_LSU_ST2_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST2 port."
+  },
+  {
+    "EventCode": "0x30020",
+    "EventName": "PM_PMC2_REWIND",
+    "BriefDescription": "The speculative event selected for PMC2 rewinds and the counter for PMC2 is not charged."
+  },
+  {
+    "EventCode": "0x30022",
+    "EventName": "PM_PMC4_SAVED",
+    "BriefDescription": "The conditions for the speculative event selected for PMC4 are met and PMC4 is charged."
+  },
+  {
+    "EventCode": "0x30024",
+    "EventName": "PM_PMC6_OVERFLOW",
+    "BriefDescription": "The event selected for PMC6 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x30028",
+    "EventName": "PM_CMPL_STALL_MEM_ECC",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was waiting for the non-speculative finish of either a stcx waiting for its result or a load waiting for non-critical sectors of data and ECC."
+  },
+  {
+    "EventCode": "0x30036",
+    "EventName": "PM_EXEC_STALL_SIMPLE_FX",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a simple fixed point instruction executing in the Load Store Unit."
+  },
+  {
+    "EventCode": "0x3003A",
+    "EventName": "PM_CMPL_STALL_EXCEPTION",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was not allowed to complete because it was interrupted by ANY exception, which has to be serviced before the instruction can complete."
+  },
+  {
+    "EventCode": "0x3F044",
+    "EventName": "PM_VSU2_ISSUE",
+    "BriefDescription": "VSU instructions issued to VSU pipe 2."
+  },
+  {
+    "EventCode": "0x30058",
+    "EventName": "PM_TLBIE_FIN",
+    "BriefDescription": "TLBIE instructions finished in the LSU. Two TLBIEs can finish each cycle. All will be counted."
+  },
+  {
+    "EventCode": "0x3D058",
+    "EventName": "PM_SCALAR_FSQRT_FDIV_ISSUE",
+    "BriefDescription": "Scalar versions of four floating point operations: fdiv,fsqrt (xvdivdp, xvdivsp, xvsqrtdp, xvsqrtsp)."
+  },
+  {
+    "EventCode": "0x30066",
+    "EventName": "PM_LSU_FIN",
+    "BriefDescription": "LSU Finished an internal operation (up to 4 per cycle)."
+  },
+  {
+    "EventCode": "0x40004",
+    "EventName": "PM_FXU_ISSUE",
+    "BriefDescription": "A fixed point instruction was issued to the VSU."
+  },
+  {
+    "EventCode": "0x40008",
+    "EventName": "PM_NTC_ALL_FIN",
+    "BriefDescription": "Cycles in which both instructions in the ICT entry pair show as finished. These are the cycles between finish and completion for the oldest pair of instructions in the pipeline."
+  },
+  {
+    "EventCode": "0x40010",
+    "EventName": "PM_PMC3_OVERFLOW",
+    "BriefDescription": "The event selected for PMC3 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x4C012",
+    "EventName": "PM_EXEC_STALL_DERAT_ONLY_MISS",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline suffered an ERAT miss and waited for it resolve."
+  },
+  {
+    "EventCode": "0x4C018",
+    "EventName": "PM_CMPL_STALL",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline cannot complete because the thread was blocked for any reason."
+  },
+  {
+    "EventCode": "0x4C01E",
+    "EventName": "PM_LSU_ST3_FIN",
+    "BriefDescription": "LSU Finished an internal operation in ST3 port."
+  },
+  {
+    "EventCode": "0x4D018",
+    "EventName": "PM_EXEC_STALL_BRU",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was executing in the Branch unit."
+  },
+  {
+    "EventCode": "0x4D01A",
+    "EventName": "PM_CMPL_STALL_HWSYNC",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a hwsync waiting for response from L2 before completing."
+  },
+  {
+    "EventCode": "0x4D01C",
+    "EventName": "PM_EXEC_STALL_TLBIEL",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a TLBIEL instruction executing in the Load Store Unit. TLBIEL instructions have lower overhead than TLBIE instructions because they don't get set to the nest."
+  },
+  {
+    "EventCode": "0x4E012",
+    "EventName": "PM_EXEC_STALL_UNKNOWN",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline completed without an ntf_type pulse. The ntf_pulse was missed by the ISU because the NTF finishes and completions came too close together."
+  },
+  {
+    "EventCode": "0x4D020",
+    "EventName": "PM_VSU3_ISSUE",
+    "BriefDescription": "VSU instruction was issued to VSU pipe 3."
+  },
+  {
+    "EventCode": "0x40132",
+    "EventName": "PM_MRK_LSU_FIN",
+    "BriefDescription": "LSU marked instruction finish."
+  },
+  {
+    "EventCode": "0x45058",
+    "EventName": "PM_IC_MISS_CMPL",
+    "BriefDescription": "Non-speculative icache miss, counted at completion."
+  },
+  {
+    "EventCode": "0x4D050",
+    "EventName": "PM_VSU_NON_FLOP_CMPL",
+    "BriefDescription": "Non-floating point VSU instructions completed."
+  },
+  {
+    "EventCode": "0x4D052",
+    "EventName": "PM_2FLOP_CMPL",
+    "BriefDescription": "Double Precision vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg completed."
+  },
+  {
+    "EventCode": "0x400F2",
+    "EventName": "PM_1PLUS_PPC_DISP",
+    "BriefDescription": "Cycles at least one Instr Dispatched."
+  },
+  {
+    "EventCode": "0x400F8",
+    "EventName": "PM_FLUSH",
+    "BriefDescription": "Flush (any type)."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/pmc.json b/tools/perf/pmu-events/arch/powerpc/power10/pmc.json
new file mode 100644
index 000000000..b5d1bd39c
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/pmc.json
@@ -0,0 +1,22 @@
+[
+  {
+    "EventCode": "0x301E8",
+    "EventName": "PM_THRESH_EXC_64",
+    "BriefDescription": "Threshold counter exceeded a value of 64."
+  },
+  {
+    "EventCode": "0x45050",
+    "EventName": "PM_1FLOP_CMPL",
+    "BriefDescription": "One floating point instruction completed (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg)."
+  },
+  {
+    "EventCode": "0x45052",
+    "EventName": "PM_4FLOP_CMPL",
+    "BriefDescription": "Four floating point instructions completed (fadd, fmul, fsub, fcmp, fsel, fabs, fnabs, fres, fsqrte, fneg)."
+  },
+  {
+    "EventCode": "0x4D054",
+    "EventName": "PM_8FLOP_CMPL",
+    "BriefDescription": "Four Double Precision vector instructions completed."
+  }
+]
diff --git a/tools/perf/pmu-events/arch/powerpc/power10/translation.json b/tools/perf/pmu-events/arch/powerpc/power10/translation.json
new file mode 100644
index 000000000..db3766dca
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power10/translation.json
@@ -0,0 +1,57 @@
+[
+  {
+    "EventCode": "0x1F15E",
+    "EventName": "PM_MRK_START_PROBE_NOP_CMPL",
+    "BriefDescription": "Marked Start probe nop (AND R0,R0,R0) completed."
+  },
+  {
+    "EventCode": "0x20016",
+    "EventName": "PM_ST_FIN",
+    "BriefDescription": "Store finish count. Includes speculative activity."
+  },
+  {
+    "EventCode": "0x20018",
+    "EventName": "PM_ST_FWD",
+    "BriefDescription": "Store forwards that finished."
+  },
+  {
+    "EventCode": "0x2011C",
+    "EventName": "PM_MRK_NTF_CYC",
+    "BriefDescription": "Cycles during which the marked instruction is the oldest in the pipeline (NTF or NTC)."
+  },
+  {
+    "EventCode": "0x2E01C",
+    "EventName": "PM_EXEC_STALL_TLBIE",
+    "BriefDescription": "Cycles in which the oldest instruction in the pipeline was a TLBIE instruction executing in the Load Store Unit."
+  },
+  {
+    "EventCode": "0x201E6",
+    "EventName": "PM_THRESH_EXC_32",
+    "BriefDescription": "Threshold counter exceeded a value of 32."
+  },
+  {
+    "EventCode": "0x200F0",
+    "EventName": "PM_ST_CMPL",
+    "BriefDescription": "Stores completed from S2Q (2nd-level store queue). This event includes regular stores, stcx and cache inhibited stores. The following operations are excluded (pteupdate, snoop tlbie complete, store atomics, miso, load atomic payloads, tlbie, tlbsync, slbieg, isync, msgsnd, slbiag, cpabort, copy, tcheck, tend, stsync, dcbst, icbi, dcbf, hwsync, lwsync, ptesync, eieio, msgsync)."
+  },
+  {
+    "EventCode": "0x200FE",
+    "EventName": "PM_DATA_FROM_L2MISS",
+    "BriefDescription": "The processor's data cache was reloaded from a source other than the local core's L1 or L2 due to a demand miss."
+  },
+  {
+    "EventCode": "0x30010",
+    "EventName": "PM_PMC2_OVERFLOW",
+    "BriefDescription": "The event selected for PMC2 caused the event counter to overflow."
+  },
+  {
+    "EventCode": "0x4D010",
+    "EventName": "PM_PMC1_SAVED",
+    "BriefDescription": "The conditions for the speculative event selected for PMC1 are met and PMC1 is charged."
+  },
+  {
+    "EventCode": "0x4D05C",
+    "EventName": "PM_DPP_FLOP_CMPL",
+    "BriefDescription": "Double-Precision or Quad-Precision instructions completed."
+  }
+]