Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json b/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json
new file mode 100644
index 000000000..3995b528e
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/floating-point.json
@@ -0,0 +1,224 @@
+[
+  {
+    "EventName": "fpu_pipe_assignment.dual",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to all pipes.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to all pipes.",
+    "UMask": "0xf0"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual3",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 3.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 3.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual2",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 2.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 2.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual1",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 1.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 1.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.dual0",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number multi-pipe uOps assigned to pipe 0.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number multi-pipe uOps assigned to pipe 0.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number uOps assigned to all fpu pipes.",
+    "PublicDescription": "The number of operations (uOps) and dual-pipe uOps dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to all pipes.",
+    "UMask": "0x0f"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total3",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 3.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one-cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 3.",
+    "UMask": "0x08"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total2",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 2.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 2.",
+    "UMask": "0x04"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total1",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps on pipe 1.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 1.",
+    "UMask": "0x02"
+  },
+  {
+    "EventName": "fpu_pipe_assignment.total0",
+    "EventCode": "0x00",
+    "BriefDescription": "Total number of fp uOps  on pipe 0.",
+    "PublicDescription": "The number of operations (uOps) dispatched to each of the 4 FPU execution pipelines. This event reflects how busy the FPU pipelines are and may be used for workload characterization. This includes all operations performed by x87, MMX, and SSE instructions, including moves. Each increment represents a one- cycle dispatch event. This event is a speculative event. Since this event includes non-numeric operations it is not suitable for measuring MFLOPS. Total number uOps assigned to pipe 0.",
+    "UMask": "0x01"
+  },
+  {
+    "EventName": "fp_sched_empty",
+    "EventCode": "0x01",
+    "BriefDescription": "This is a speculative event. The number of cycles in which the FPU scheduler is empty. Note that some Ops like FP loads bypass the scheduler."
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.all",
+    "EventCode": "0x02",
+    "BriefDescription": "All Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8.",
+    "UMask": "0x07"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.div_sqr_r_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Divide and square root Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Divide and square root Ops.",
+    "UMask": "0x04"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.mul_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Multiply Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Multiply Ops.",
+    "UMask": "0x02"
+  },
+  {
+    "EventName": "fp_retx87_fp_ops.add_sub_ops",
+    "EventCode": "0x02",
+    "BriefDescription": "Add/subtract Ops.",
+    "PublicDescription": "The number of x87 floating-point Ops that have retired. The number of events logged per cycle can vary from 0 to 8. Add/subtract Ops.",
+    "UMask": "0x01"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.all",
+    "EventCode": "0x03",
+    "BriefDescription": "All FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15.",
+    "UMask": "0xff"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_mult_add_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "UMask": "0x80"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_div_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision divide/square root FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision divide/square root FLOPS.",
+    "UMask": "0x40"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_mult_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision multiply FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision multiply FLOPS.",
+    "UMask": "0x20"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.dp_add_sub_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Double precision add/subtract FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Double precision add/subtract FLOPS.",
+    "UMask": "0x10"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_mult_add_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single precision multiply-add FLOPS. Multiply-add counts as 2 FLOPS.",
+    "UMask": "0x08"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_div_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision divide/square root FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision divide/square root FLOPS.",
+    "UMask": "0x04"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_mult_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision multiply FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision multiply FLOPS.",
+    "UMask": "0x02"
+  },
+  {
+    "EventName": "fp_ret_sse_avx_ops.sp_add_sub_flops",
+    "EventCode": "0x03",
+    "BriefDescription": "Single-precision add/subtract FLOPS.",
+    "PublicDescription": "This is a retire-based event. The number of retired SSE/AVX FLOPS. The number of events logged per cycle can vary from 0 to 64. This event can count above 15. Single-precision add/subtract FLOPS.",
+    "UMask": "0x01"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.optimized",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Scalar Ops optimized.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Scalar Ops optimized.",
+    "UMask": "0x08"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.opt_potential",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of Ops that are candidates for optimization (have Z-bit either set or pass).",
+    "UMask": "0x04"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops_elim",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops eliminated.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops eliminated.",
+    "UMask": "0x02"
+  },
+  {
+    "EventName": "fp_num_mov_elim_scal_op.sse_mov_ops",
+    "EventCode": "0x04",
+    "BriefDescription": "Number of SSE Move Ops.",
+    "PublicDescription": "This is a dispatch based speculative event, and is useful for measuring the effectiveness of the Move elimination and Scalar code optimization schemes. Number of SSE Move Ops.",
+    "UMask": "0x01"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
+    "PublicDescription": "The number of serializing Ops retired. x87 control word mispredict traps due to mispredictions in RC or PC, or changes in mask bits.",
+    "UMask": "0x08"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.x87_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "x87 bottom-executing uOps retired.",
+    "PublicDescription": "The number of serializing Ops retired. x87 bottom-executing uOps retired.",
+    "UMask": "0x04"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_ctrl_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
+    "PublicDescription": "The number of serializing Ops retired. SSE control word mispredict traps due to mispredictions in RC, FTZ or DAZ, or changes in mask bits.",
+    "UMask": "0x02"
+  },
+  {
+    "EventName": "fp_retired_ser_ops.sse_bot_ret",
+    "EventCode": "0x05",
+    "BriefDescription": "SSE bottom-executing uOps retired.",
+    "PublicDescription": "The number of serializing Ops retired. SSE bottom-executing uOps retired.",
+    "UMask": "0x01"
+  }
+]