Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1022 insertions, 0 deletions

diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json
new file mode 100644
index 000000000..d1e64e0d6
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json
@@ -0,0 +1,1022 @@
+[
+    {
+        "BriefDescription": "Divide operations executed",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x14",
+        "EventName": "ARITH.FPU_DIV",
+        "PublicDescription": "Divide operations executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles when divider is busy executing divide operations",
+        "EventCode": "0x14",
+        "EventName": "ARITH.FPU_DIV_ACTIVE",
+        "PublicDescription": "Cycles that the divider is active, includes INT and FP. Set 'edge =1, cmask=1' to count the number of divides.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Speculative and retired  branches",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_BRANCHES",
+        "PublicDescription": "Counts all near executed branches (not necessarily retired).",
+        "SampleAfterValue": "200003",
+        "UMask": "0xff"
+    },
+    {
+        "BriefDescription": "Speculative and retired macro-conditional branches",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_CONDITIONAL",
+        "PublicDescription": "Speculative and retired macro-conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
+    },
+    {
+        "BriefDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_DIRECT_JMP",
+        "PublicDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc2"
+    },
+    {
+        "BriefDescription": "Speculative and retired direct near calls",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_DIRECT_NEAR_CALL",
+        "PublicDescription": "Speculative and retired direct near calls.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xd0"
+    },
+    {
+        "BriefDescription": "Speculative and retired indirect branches excluding calls and returns",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
+        "PublicDescription": "Speculative and retired indirect branches excluding calls and returns.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "Speculative and retired indirect return branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_INDIRECT_NEAR_RETURN",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc8"
+    },
+    {
+        "BriefDescription": "Not taken macro-conditional branches",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.NONTAKEN_CONDITIONAL",
+        "PublicDescription": "Not taken macro-conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired macro-conditional branches",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_CONDITIONAL",
+        "PublicDescription": "Taken speculative and retired macro-conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_DIRECT_JUMP",
+        "PublicDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x82"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired direct near calls",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_DIRECT_NEAR_CALL",
+        "PublicDescription": "Taken speculative and retired direct near calls.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x90"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect branches excluding calls and returns",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
+        "PublicDescription": "Taken speculative and retired indirect branches excluding calls and returns.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x84"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect calls",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL",
+        "PublicDescription": "Taken speculative and retired indirect calls.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xa0"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect branches with return mnemonic",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_RETURN",
+        "PublicDescription": "Taken speculative and retired indirect branches with return mnemonic.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x88"
+    },
+    {
+        "BriefDescription": "All (macro) branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Branch instructions at retirement.",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "All (macro) branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Conditional branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Far branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
+        "PublicDescription": "Number of far branches retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Direct and indirect near call instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3).",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL_R3",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Return instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Taken branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Not taken branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
+        "PublicDescription": "Counts the number of not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Speculative and retired mispredicted macro conditional branches",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_BRANCHES",
+        "PublicDescription": "Counts all near executed branches (not necessarily retired).",
+        "SampleAfterValue": "200003",
+        "UMask": "0xff"
+    },
+    {
+        "BriefDescription": "Speculative and retired mispredicted macro conditional branches",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_CONDITIONAL",
+        "PublicDescription": "Speculative and retired mispredicted macro conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
+    },
+    {
+        "BriefDescription": "Mispredicted indirect branches excluding calls and returns",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
+        "PublicDescription": "Mispredicted indirect branches excluding calls and returns.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.NONTAKEN_CONDITIONAL",
+        "PublicDescription": "Not taken speculative and retired mispredicted macro conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted macro conditional branches",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_CONDITIONAL",
+        "PublicDescription": "Taken speculative and retired mispredicted macro conditional branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
+        "PublicDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x84"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect calls",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_NEAR_CALL",
+        "PublicDescription": "Taken speculative and retired mispredicted indirect calls.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xa0"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_RETURN_NEAR",
+        "PublicDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x88"
+    },
+    {
+        "BriefDescription": "All mispredicted macro branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Mispredicted branch instructions at retirement.",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "Mispredicted macro branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "number of near branch instructions retired that were mispredicted and taken.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Count XClk pulses when this thread is unhalted and the other is halted.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
+        "PublicDescription": "Increments at the frequency of XCLK (100 MHz) when not halted.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted. (counts at 100 MHz rate)",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Reference cycles when the core is not in halt state.",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
+        "PublicDescription": "Reference cycles when the thread is unhalted. (counts at 100 MHz rate)",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted. (counts at 100 MHz rate)",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Core cycles when the thread is not in halt state.",
+        "EventName": "CPU_CLK_UNHALTED.THREAD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
+        "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Thread cycles when thread is not in halt state",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
+        "PublicDescription": "Counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
+        "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
+        "CounterMask": "8",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles with pending L1 cache miss loads.",
+        "CounterMask": "8",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_PENDING",
+        "PublicDescription": "Cycles with pending L1 cache miss loads. Set AnyThread to count per core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles while L2 cache miss load* is outstanding.",
+        "CounterMask": "1",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with pending L2 cache miss loads.",
+        "CounterMask": "1",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_PENDING",
+        "PublicDescription": "Cycles with pending L2 miss loads. Set AnyThread to count per core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with pending memory loads.",
+        "CounterMask": "2",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_LDM_PENDING",
+        "PublicDescription": "Cycles with pending memory loads. Set AnyThread to count per core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
+        "CounterMask": "2",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "This event increments by 1 for every cycle where there was no execute for this thread.",
+        "CounterMask": "4",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_NO_EXECUTE",
+        "PublicDescription": "Total execution stalls.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
+        "CounterMask": "12",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Execution stalls due to L1 data cache misses",
+        "CounterMask": "12",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_PENDING",
+        "PublicDescription": "Execution stalls due to L1 data cache miss loads. Set Cmask=0CH.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Execution stalls while L2 cache miss load* is outstanding.",
+        "CounterMask": "5",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x5"
+    },
+    {
+        "BriefDescription": "Execution stalls due to L2 cache misses.",
+        "CounterMask": "5",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_PENDING",
+        "PublicDescription": "Number of loads missed L2.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x5"
+    },
+    {
+        "BriefDescription": "Execution stalls due to memory subsystem.",
+        "CounterMask": "6",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_LDM_PENDING",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
+        "CounterMask": "6",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Total execution stalls.",
+        "CounterMask": "4",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Stall cycles because IQ is full",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.IQ_FULL",
+        "PublicDescription": "Stall cycles due to IQ is full.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.LCP",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Instructions retired from execution.",
+        "EventName": "INST_RETIRED.ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of instructions retired. General Counter   - architectural event",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "PublicDescription": "Number of instructions at retirement.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.PREC_DIST",
+        "PEBS": "2",
+        "PublicDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of cycles waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
+        "CounterMask": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
+        "CounterMask": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "This event counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.NO_SR",
+        "PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.STORE_FORWARD",
+        "PublicDescription": "Loads blocked by overlapping with store buffer that cannot be forwarded.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "False dependencies in MOB due to partial compare on address",
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
+        "PublicDescription": "False dependencies in MOB due to partial compare on address.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for hardware prefetch",
+        "EventCode": "0x4C",
+        "EventName": "LOAD_HIT_PRE.HW_PF",
+        "PublicDescription": "Non-SW-prefetch load dispatches that hit fill buffer allocated for H/W prefetch.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for software prefetch",
+        "EventCode": "0x4C",
+        "EventName": "LOAD_HIT_PRE.SW_PF",
+        "PublicDescription": "Non-SW-prefetch load dispatches that hit fill buffer allocated for S/W prefetch.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder",
+        "CounterMask": "4",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_4_UOPS",
+        "PublicDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder",
+        "CounterMask": "1",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_ACTIVE",
+        "PublicDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of Uops delivered by the LSD.",
+        "EventCode": "0xA8",
+        "EventName": "LSD.UOPS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of machine clears (nukes) of any type.",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.COUNT",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event counts the number of executed Intel AVX masked load operations that refer to an illegal address range with the mask bits set to 0.",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.MASKMOV",
+        "PublicDescription": "Counts the number of executed AVX masked load operations that refer to an illegal address range with the mask bits set to 0.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Self-modifying code (SMC) detected.",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.SMC",
+        "PublicDescription": "Number of self-modifying-code machine clears detected.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of integer Move Elimination candidate uops that were eliminated.",
+        "EventCode": "0x58",
+        "EventName": "MOVE_ELIMINATION.INT_ELIMINATED",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of integer Move Elimination candidate uops that were not eliminated.",
+        "EventCode": "0x58",
+        "EventName": "MOVE_ELIMINATION.INT_NOT_ELIMINATED",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times any microcode assist is invoked by HW upon uop writeback.",
+        "EventCode": "0xC1",
+        "EventName": "OTHER_ASSISTS.ANY_WB_ASSIST",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Resource-related stall cycles",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.ANY",
+        "PublicDescription": "Cycles Allocation is stalled due to Resource Related reason.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to re-order buffer full.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.ROB",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to no eligible RS entry available.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.RS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.SB",
+        "PublicDescription": "Cycles stalled due to no store buffers available (not including draining form sync).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Count cases of saving new LBR",
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
+        "PublicDescription": "Count cases of saving new LBR records by hardware.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_CYCLES",
+        "PublicDescription": "Cycles the RS is empty for the thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_END",
+        "Invert": "1",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 0",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 0.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 0",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0_CORE",
+        "PublicDescription": "Cycles per core when uops are dispatched to port 0.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 1",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 1.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 1",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1_CORE",
+        "PublicDescription": "Cycles per core when uops are dispatched to port 1.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 2",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 2.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Uops dispatched to port 2, loads and stores per core (speculative and retired).",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 3",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 3.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 3",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3_CORE",
+        "PublicDescription": "Cycles per core when load or STA uops are dispatched to port 3.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 4",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 4.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 4",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4_CORE",
+        "PublicDescription": "Cycles per core when uops are dispatched to port 4.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 5",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
+        "PublicDescription": "Cycles which a Uop is dispatched on port 5.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 5",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5_CORE",
+        "PublicDescription": "Cycles per core when uops are dispatched to port 5.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of uops executed on the core.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE",
+        "PublicDescription": "Counts total number of uops to be executed per-core each cycle.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
+        "PublicDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
+        "PublicDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core",
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "PublicDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
+        "PublicDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
+        "Invert": "1",
+        "PublicDescription": "Cycles with no micro-ops executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
+        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.THREAD",
+        "PublicDescription": "Counts total number of uops to be executed per-thread each cycle. Set Cmask = 1, INV =1 to count stall cycles.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.ANY",
+        "PublicDescription": "Increments each cycle the # of Uops issued by the RAT to RS. Set Cmask = 1, Inv = 1, Any= 1to count stalled cycles of this core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.CORE_STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of flags-merge uops being allocated.",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.FLAGS_MERGE",
+        "PublicDescription": "Number of flags-merge uops allocated. Such uops adds delay.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of Multiply packed/scalar single precision uops allocated",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.SINGLE_MUL",
+        "PublicDescription": "Number of multiply packed/scalar single precision uops allocated.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.SLOW_LEA",
+        "PublicDescription": "Number of slow LEA or similar uops allocated. Such uop has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired uops.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.ALL",
+        "PEBS": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles without actually retired uops.",
+        "CounterMask": "1",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.CORE_STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retirement slots used.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
+        "PEBS": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles without actually retired uops.",
+        "CounterMask": "1",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "CounterMask": "10",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    }
+]