Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 947 insertions, 0 deletions

diff --git a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
new file mode 100644
index 000000000..11d41ce8c
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json
@@ -0,0 +1,947 @@
+[
+    {
+        "BriefDescription": "This event counts executed load operations with all the following traits: 1. addressing of the format [base + offset], 2. the offset is between 1 and 2047, 3. the address specified in the base register is in one page and the address [base+offset] is in an.",
+        "EventCode": "0xB6",
+        "EventName": "AGU_BYPASS_CANCEL.COUNT",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Divide operations executed.",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x14",
+        "EventName": "ARITH.FPU_DIV",
+        "PublicDescription": "This event counts the number of the divide operations executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when divider is busy executing divide operations.",
+        "EventCode": "0x14",
+        "EventName": "ARITH.FPU_DIV_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Speculative and retired  branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_BRANCHES",
+        "SampleAfterValue": "200003",
+        "UMask": "0xff"
+    },
+    {
+        "BriefDescription": "Speculative and retired macro-conditional branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
+    },
+    {
+        "BriefDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_DIRECT_JMP",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc2"
+    },
+    {
+        "BriefDescription": "Speculative and retired direct near calls.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_DIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xd0"
+    },
+    {
+        "BriefDescription": "Speculative and retired indirect branches excluding calls and returns.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "Speculative and retired indirect return branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.ALL_INDIRECT_NEAR_RETURN",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc8"
+    },
+    {
+        "BriefDescription": "Not taken macro-conditional branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.NONTAKEN_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired macro-conditional branches.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_DIRECT_JUMP",
+        "SampleAfterValue": "200003",
+        "UMask": "0x82"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired direct near calls.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_DIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x90"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect branches excluding calls and returns.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
+        "SampleAfterValue": "200003",
+        "UMask": "0x84"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect calls.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xa0"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired indirect branches with return mnemonic.",
+        "EventCode": "0x88",
+        "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_RETURN",
+        "SampleAfterValue": "200003",
+        "UMask": "0x88"
+    },
+    {
+        "BriefDescription": "All (macro) branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "All (macro) branch instructions retired. (Precise Event - PEBS).",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Conditional branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Far branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Direct and indirect near call instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Return instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Taken branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Not taken branch instructions retired.",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Speculative and retired mispredicted macro conditional branches.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_BRANCHES",
+        "SampleAfterValue": "200003",
+        "UMask": "0xff"
+    },
+    {
+        "BriefDescription": "Speculative and retired mispredicted macro conditional branches.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
+    },
+    {
+        "BriefDescription": "Speculative and retired mispredicted direct near calls.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_DIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xd0"
+    },
+    {
+        "BriefDescription": "Mispredicted indirect branches excluding calls and returns.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.NONTAKEN_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted macro conditional branches.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_CONDITIONAL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted direct near calls.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_DIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x90"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
+        "SampleAfterValue": "200003",
+        "UMask": "0x84"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect calls.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_NEAR_CALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0xa0"
+    },
+    {
+        "BriefDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic.",
+        "EventCode": "0x89",
+        "EventName": "BR_MISP_EXEC.TAKEN_RETURN_NEAR",
+        "SampleAfterValue": "200003",
+        "UMask": "0x88"
+    },
+    {
+        "BriefDescription": "All mispredicted macro branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "Mispredicted macro branch instructions retired. (Precise Event - PEBS).",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Direct and indirect mispredicted near call instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Mispredicted not taken branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.NOT_TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Mispredicted taken branch instructions retired.",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Count XClk pulses when this thread is unhalted and the other is halted.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Reference cycles when the core is not in halt state.",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Core cycles when the thread is not in halt state.",
+        "EventName": "CPU_CLK_UNHALTED.THREAD",
+        "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Thread cycles when thread is not in halt state.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Each cycle there was a miss-pending demand load this thread, increment by 1. Note this is in DCU and connected to Umask 1. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.",
+        "CounterMask": "2",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_PENDING",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Each cycle there was a MLC-miss pending demand load this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0.",
+        "CounterMask": "1",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_PENDING",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Each cycle there was no dispatch for this thread, increment by 1. Note this is connect to Umask 2. No dispatch can be deduced from the UOPS_EXECUTED event.",
+        "CounterMask": "4",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_NO_DISPATCH",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Each cycle there was a miss-pending demand load this thread and no uops dispatched, increment by 1. Note this is in DCU and connected to Umask 1 and 2. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.",
+        "CounterMask": "6",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_PENDING",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Each cycle there was a MLC-miss pending demand load and no uops dispatched on this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0 and 2.",
+        "CounterMask": "5",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_PENDING",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x5"
+    },
+    {
+        "BriefDescription": "Stall cycles because IQ is full.",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.IQ_FULL",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.LCP",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Instructions retired from execution.",
+        "EventName": "INST_RETIRED.ANY",
+        "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of instructions retired. General Counter   - architectural event.",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Instructions retired. (Precise Event - PEBS).",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.PREC_DIST",
+        "PEBS": "2",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) external stall is sent to Instruction Decode Queue (IDQ) for the thread.",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RAT_STALL_CYCLES",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of cycles waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
+        "CounterMask": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
+        "CounterMask": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_STALLS_COUNT",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Number of cases where any load ends up with a valid block-code written to the load buffer (including blocks due to Memory Order Buffer (MOB), Data Cache Unit (DCU), TLB, but load has no DCU miss).",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.ALL_BLOCK",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Loads delayed due to SB blocks, preceding store operations with known addresses but unknown data.",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.DATA_UNKNOWN",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.NO_SR",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding.",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.STORE_FORWARD",
+        "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load.  The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store.  See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual.  The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "False dependencies in MOB due to partial compare.",
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
+        "PublicDescription": "Aliasing occurs when a load is issued after a store and their memory addresses are offset by 4K.  This event counts the number of loads that aliased with a preceding store, resulting in an extended address check in the pipeline.  The enhanced address check typically has a performance penalty of 5 cycles.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event counts the number of times that load operations are temporarily blocked because of older stores, with addresses that are not yet known. A load operation may incur more than one block of this type.",
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ALL_STA_BLOCK",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for hardware prefetch.",
+        "EventCode": "0x4C",
+        "EventName": "LOAD_HIT_PRE.HW_PF",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for software prefetch.",
+        "EventCode": "0x4C",
+        "EventName": "LOAD_HIT_PRE.SW_PF",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
+        "CounterMask": "4",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_4_UOPS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
+        "CounterMask": "1",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of Uops delivered by the LSD.",
+        "EventCode": "0xA8",
+        "EventName": "LSD.UOPS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of machine clears (nukes) of any type.",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.COUNT",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event counts the number of executed Intel AVX masked load operations that refer to an illegal address range with the mask bits set to 0.",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.MASKMOV",
+        "PublicDescription": "Maskmov false fault - counts number of time ucode passes through Maskmov flow due to instruction's mask being 0 while the flow was completed without raising a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Self-modifying code (SMC) detected.",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.SMC",
+        "PublicDescription": "This event is incremented when self-modifying code (SMC) is detected, which causes a machine clear.  Machine clears can have a significant performance impact if they are happening frequently.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired instructions experiencing ITLB misses.",
+        "EventCode": "0xC1",
+        "EventName": "OTHER_ASSISTS.ITLB_MISS_RETIRED",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Increments the number of flags-merge uops in flight each cycle.",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Performance sensitive flags-merging uops added by Sandy Bridge u-arch.",
+        "CounterMask": "1",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP_CYCLES",
+        "PublicDescription": "This event counts the number of cycles spent executing performance-sensitive flags-merging uops. For example, shift CL (merge_arith_flags). For more details, See the Intel? 64 and IA-32 Architectures Optimization Reference Manual.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Multiply packed/scalar single precision uops allocated.",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.MUL_SINGLE_UOP",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Cycles with at least one slow LEA uop being allocated.",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.SLOW_LEA_WINDOW",
+        "PublicDescription": "This event counts the number of cycles with at least one slow LEA uop being allocated. A uop is generally considered as slow LEA if it has three sources (for example, two sources and immediate) regardless of whether it is a result of LEA instruction or not. Examples of the slow LEA uop are or uops with base, index, and offset source operands using base and index reqisters, where base is EBR/RBP/R13, using RIP relative or 16-bit addressing modes. See the Intel? 64 and IA-32 Architectures Optimization Reference Manual for more details about slow LEA instructions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Resource-related stall cycles.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the cycles of stall due to lack of load buffers.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.LB",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Resource stalls due to load or store buffers all being in use.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.LB_SB",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xa"
+    },
+    {
+        "BriefDescription": "Resource stalls due to memory buffers or Reservation Station (RS) being fully utilized.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.MEM_RS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Resource stalls due to Rob being full, FCSW, MXCSR and OTHER.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.OOO_RSRC",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xf0"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to re-order buffer full.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.ROB",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to no eligible RS entry available.",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.RS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.SB",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles with either free list is empty.",
+        "EventCode": "0x5B",
+        "EventName": "RESOURCE_STALLS2.ALL_FL_EMPTY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Resource stalls2 control structures full for physical registers.",
+        "EventCode": "0x5B",
+        "EventName": "RESOURCE_STALLS2.ALL_PRF_CONTROL",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xf"
+    },
+    {
+        "BriefDescription": "Cycles when Allocator is stalled if BOB is full and new branch needs it.",
+        "EventCode": "0x5B",
+        "EventName": "RESOURCE_STALLS2.BOB_FULL",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Resource stalls out of order resources full.",
+        "EventCode": "0x5B",
+        "EventName": "RESOURCE_STALLS2.OOO_RSRC",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4f"
+    },
+    {
+        "BriefDescription": "Count cases of saving new LBR.",
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread.",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_CYCLES",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_END",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Uops dispatched from any thread.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_DISPATCHED.CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Uops dispatched per thread.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_DISPATCHED.THREAD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 0.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 0.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 1.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 1.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 2.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 2.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 3.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 3.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 4.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 4.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Cycles per thread when uops are dispatched to port 5.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles per core when uops are dispatched to port 5.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5_CORE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS).",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.ANY",
+        "PublicDescription": "This event counts the number of Uops issued by the front-end of the pipeilne to the back-end.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads.",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.CORE_STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread.",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Actually retired uops.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.ALL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts the number of micro-ops retired.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles without actually retired uops.",
+        "CounterMask": "1",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.CORE_STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retirement slots used.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
+        "PEBS": "1",
+        "PublicDescription": "This event counts the number of retirement slots used each cycle.  There are potentially 4 slots that can be used each cycle - meaning, 4 micro-ops or 4 instructions could retire each cycle.  This event is used in determining the 'Retiring' category of the Top-Down pipeline slots characterization.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles without actually retired uops.",
+        "CounterMask": "1",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.STALL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "CounterMask": "10",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    }
+]