Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 421 insertions, 0 deletions

diff --git a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
new file mode 100644
index 000000000..13ccf50db
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
@@ -0,0 +1,421 @@
+[
+    {
+        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
+        "EventCode": "0xE6",
+        "EventName": "BACLEARS.ANY",
+        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.COUNT",
+        "PublicDescription": "This event counts the number of the Decode Stream Buffer (DSB)-to-MITE switches including all misses because of missing Decode Stream Buffer (DSB) cache and u-arch forced misses.\nNote: Invoking MITE requires two or three cycles delay.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
+        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced DSB miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x1",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced a critical DSB miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.DSB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x11",
+        "PEBS": "1",
+        "PublicDescription": "Number of retired Instructions that experienced a critical DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. Critical means stalls were exposed to the back-end as a result of the DSB miss.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.ITLB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x14",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.L1I_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x12",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.L2_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x13",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400106",
+        "PEBS": "2",
+        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x408006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x401006",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x410006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x100206",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x200206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x300206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x402006",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400406",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x420006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_64",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x404006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400806",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.STLB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x15",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.",
+        "EventCode": "0x80",
+        "EventName": "ICACHE_16B.IFDATA_STALL",
+        "PublicDescription": "Cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_HIT",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_MISS",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_STALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS",
+        "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Cycles MITE is delivering 4 Uops",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x24"
+    },
+    {
+        "BriefDescription": "Cycles MITE is delivering any Uop",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS",
+        "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x24"
+    },
+    {
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_DSB_CYCLES",
+        "PublicDescription": "Counts cycles during which uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_MITE_UOPS",
+        "PublicDescription": "Counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_SWITCHES",
+        "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_UOPS",
+        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
+        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "CounterMask": "4",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.",
+        "CounterMask": "1",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "CounterMask": "3",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
+        "CounterMask": "2",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
+        "CounterMask": "1",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    }
+]