Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 184 insertions, 0 deletions

diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
new file mode 100644
index 000000000..cac7b2542
--- /dev/null
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
@@ -0,0 +1,184 @@
+# SchedGui.py - Python extension for perf script, basic GUI code for
+#		traces drawing and overview.
+#
+# Copyright (C) 2010 by Frederic Weisbecker <fweisbec@gmail.com>
+#
+# This software is distributed under the terms of the GNU General
+# Public License ("GPL") version 2 as published by the Free Software
+# Foundation.
+
+
+try:
+	import wx
+except ImportError:
+	raise ImportError("You need to install the wxpython lib for this script")
+
+
+class RootFrame(wx.Frame):
+	Y_OFFSET = 100
+	RECT_HEIGHT = 100
+	RECT_SPACE = 50
+	EVENT_MARKING_WIDTH = 5
+
+	def __init__(self, sched_tracer, title, parent = None, id = -1):
+		wx.Frame.__init__(self, parent, id, title)
+
+		(self.screen_width, self.screen_height) = wx.GetDisplaySize()
+		self.screen_width -= 10
+		self.screen_height -= 10
+		self.zoom = 0.5
+		self.scroll_scale = 20
+		self.sched_tracer = sched_tracer
+		self.sched_tracer.set_root_win(self)
+		(self.ts_start, self.ts_end) = sched_tracer.interval()
+		self.update_width_virtual()
+		self.nr_rects = sched_tracer.nr_rectangles() + 1
+		self.height_virtual = RootFrame.Y_OFFSET + (self.nr_rects * (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE))
+
+		# whole window panel
+		self.panel = wx.Panel(self, size=(self.screen_width, self.screen_height))
+
+		# scrollable container
+		self.scroll = wx.ScrolledWindow(self.panel)
+		self.scroll.SetScrollbars(self.scroll_scale, self.scroll_scale, self.width_virtual / self.scroll_scale, self.height_virtual / self.scroll_scale)
+		self.scroll.EnableScrolling(True, True)
+		self.scroll.SetFocus()
+
+		# scrollable drawing area
+		self.scroll_panel = wx.Panel(self.scroll, size=(self.screen_width - 15, self.screen_height / 2))
+		self.scroll_panel.Bind(wx.EVT_PAINT, self.on_paint)
+		self.scroll_panel.Bind(wx.EVT_KEY_DOWN, self.on_key_press)
+		self.scroll_panel.Bind(wx.EVT_LEFT_DOWN, self.on_mouse_down)
+		self.scroll.Bind(wx.EVT_PAINT, self.on_paint)
+		self.scroll.Bind(wx.EVT_KEY_DOWN, self.on_key_press)
+		self.scroll.Bind(wx.EVT_LEFT_DOWN, self.on_mouse_down)
+
+		self.scroll.Fit()
+		self.Fit()
+
+		self.scroll_panel.SetDimensions(-1, -1, self.width_virtual, self.height_virtual, wx.SIZE_USE_EXISTING)
+
+		self.txt = None
+
+		self.Show(True)
+
+	def us_to_px(self, val):
+		return val / (10 ** 3) * self.zoom
+
+	def px_to_us(self, val):
+		return (val / self.zoom) * (10 ** 3)
+
+	def scroll_start(self):
+		(x, y) = self.scroll.GetViewStart()
+		return (x * self.scroll_scale, y * self.scroll_scale)
+
+	def scroll_start_us(self):
+		(x, y) = self.scroll_start()
+		return self.px_to_us(x)
+
+	def paint_rectangle_zone(self, nr, color, top_color, start, end):
+		offset_px = self.us_to_px(start - self.ts_start)
+		width_px = self.us_to_px(end - self.ts_start)
+
+		offset_py = RootFrame.Y_OFFSET + (nr * (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE))
+		width_py = RootFrame.RECT_HEIGHT
+
+		dc = self.dc
+
+		if top_color is not None:
+			(r, g, b) = top_color
+			top_color = wx.Colour(r, g, b)
+			brush = wx.Brush(top_color, wx.SOLID)
+			dc.SetBrush(brush)
+			dc.DrawRectangle(offset_px, offset_py, width_px, RootFrame.EVENT_MARKING_WIDTH)
+			width_py -= RootFrame.EVENT_MARKING_WIDTH
+			offset_py += RootFrame.EVENT_MARKING_WIDTH
+
+		(r ,g, b) = color
+		color = wx.Colour(r, g, b)
+		brush = wx.Brush(color, wx.SOLID)
+		dc.SetBrush(brush)
+		dc.DrawRectangle(offset_px, offset_py, width_px, width_py)
+
+	def update_rectangles(self, dc, start, end):
+		start += self.ts_start
+		end += self.ts_start
+		self.sched_tracer.fill_zone(start, end)
+
+	def on_paint(self, event):
+		dc = wx.PaintDC(self.scroll_panel)
+		self.dc = dc
+
+		width = min(self.width_virtual, self.screen_width)
+		(x, y) = self.scroll_start()
+		start = self.px_to_us(x)
+		end = self.px_to_us(x + width)
+		self.update_rectangles(dc, start, end)
+
+	def rect_from_ypixel(self, y):
+		y -= RootFrame.Y_OFFSET
+		rect = y / (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE)
+		height = y % (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE)
+
+		if rect < 0 or rect > self.nr_rects - 1 or height > RootFrame.RECT_HEIGHT:
+			return -1
+
+		return rect
+
+	def update_summary(self, txt):
+		if self.txt:
+			self.txt.Destroy()
+		self.txt = wx.StaticText(self.panel, -1, txt, (0, (self.screen_height / 2) + 50))
+
+
+	def on_mouse_down(self, event):
+		(x, y) = event.GetPositionTuple()
+		rect = self.rect_from_ypixel(y)
+		if rect == -1:
+			return
+
+		t = self.px_to_us(x) + self.ts_start
+
+		self.sched_tracer.mouse_down(rect, t)
+
+
+	def update_width_virtual(self):
+		self.width_virtual = self.us_to_px(self.ts_end - self.ts_start)
+
+	def __zoom(self, x):
+		self.update_width_virtual()
+		(xpos, ypos) = self.scroll.GetViewStart()
+		xpos = self.us_to_px(x) / self.scroll_scale
+		self.scroll.SetScrollbars(self.scroll_scale, self.scroll_scale, self.width_virtual / self.scroll_scale, self.height_virtual / self.scroll_scale, xpos, ypos)
+		self.Refresh()
+
+	def zoom_in(self):
+		x = self.scroll_start_us()
+		self.zoom *= 2
+		self.__zoom(x)
+
+	def zoom_out(self):
+		x = self.scroll_start_us()
+		self.zoom /= 2
+		self.__zoom(x)
+
+
+	def on_key_press(self, event):
+		key = event.GetRawKeyCode()
+		if key == ord("+"):
+			self.zoom_in()
+			return
+		if key == ord("-"):
+			self.zoom_out()
+			return
+
+		key = event.GetKeyCode()
+		(x, y) = self.scroll.GetViewStart()
+		if key == wx.WXK_RIGHT:
+			self.scroll.Scroll(x + 1, y)
+		elif key == wx.WXK_LEFT:
+			self.scroll.Scroll(x - 1, y)
+		elif key == wx.WXK_DOWN:
+			self.scroll.Scroll(x, y + 1)
+		elif key == wx.WXK_UP:
+			self.scroll.Scroll(x, y - 1)