Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 171 insertions, 0 deletions

diff --git a/tools/perf/tests/shell/buildid.sh b/tools/perf/tests/shell/buildid.sh
new file mode 100755
index 000000000..aaf851108
--- /dev/null
+++ b/tools/perf/tests/shell/buildid.sh
@@ -0,0 +1,171 @@
+#!/bin/sh
+# build id cache operations
+# SPDX-License-Identifier: GPL-2.0
+
+# skip if there's no readelf
+if ! [ -x "$(command -v readelf)" ]; then
+	echo "failed: no readelf, install binutils"
+	exit 2
+fi
+
+# skip if there's no compiler
+if ! [ -x "$(command -v cc)" ]; then
+	echo "failed: no compiler, install gcc"
+	exit 2
+fi
+
+# check what we need to test windows binaries
+add_pe=1
+run_pe=1
+if ! perf version --build-options | grep -q 'libbfd: .* on '; then
+	echo "WARNING: perf not built with libbfd. PE binaries will not be tested."
+	add_pe=0
+	run_pe=0
+fi
+if ! which wine > /dev/null; then
+	echo "WARNING: wine not found. PE binaries will not be run."
+	run_pe=0
+fi
+
+# set up wine
+if [ ${run_pe} -eq 1 ]; then
+	wineprefix=$(mktemp -d /tmp/perf.wineprefix.XXX)
+	export WINEPREFIX=${wineprefix}
+	# clear display variables to prevent wine from popping up dialogs
+	unset DISPLAY
+	unset WAYLAND_DISPLAY
+fi
+
+ex_md5=$(mktemp /tmp/perf.ex.MD5.XXX)
+ex_sha1=$(mktemp /tmp/perf.ex.SHA1.XXX)
+ex_pe=$(dirname $0)/../pe-file.exe
+
+echo 'int main(void) { return 0; }' | cc -Wl,--build-id=sha1 -o ${ex_sha1} -x c -
+echo 'int main(void) { return 0; }' | cc -Wl,--build-id=md5 -o ${ex_md5} -x c -
+
+echo "test binaries: ${ex_sha1} ${ex_md5} ${ex_pe}"
+
+check()
+{
+	case $1 in
+	*.exe)
+		# We don't have a tool that can pull a nicely formatted build-id out of
+		# a PE file, but we can extract the whole section with objcopy and
+		# format it ourselves. The .buildid section is a Debug Directory
+		# containing a CodeView entry:
+		#     https://docs.microsoft.com/en-us/windows/win32/debug/pe-format#debug-directory-image-only
+		#     https://github.com/dotnet/runtime/blob/da94c022576a5c3bbc0e896f006565905eb137f9/docs/design/specs/PE-COFF.md
+		# The build-id starts at byte 33 and must be rearranged into a GUID.
+		id=`objcopy -O binary --only-section=.buildid $1 /dev/stdout | \
+			cut -c 33-48 | hexdump -ve '/1 "%02x"' | \
+			sed 's@^\(..\)\(..\)\(..\)\(..\)\(..\)\(..\)\(..\)\(..\)\(.*\)0a$@\4\3\2\1\6\5\8\7\9@'`
+		;;
+	*)
+		id=`readelf -n ${1} 2>/dev/null | grep 'Build ID' | awk '{print $3}'`
+		;;
+	esac
+	echo "build id: ${id}"
+
+	link=${build_id_dir}/.build-id/${id:0:2}/${id:2}
+	echo "link: ${link}"
+
+	if [ ! -h $link ]; then
+		echo "failed: link ${link} does not exist"
+		exit 1
+	fi
+
+	file=${build_id_dir}/.build-id/${id:0:2}/`readlink ${link}`/elf
+	echo "file: ${file}"
+
+	# Check for file permission of original file
+	# in case of pe-file.exe file
+	echo $1 | grep ".exe"
+	if [ $? -eq 0 ]; then
+		if [ -x $1  -a ! -x $file ]; then
+			echo "failed: file ${file} executable does not exist"
+			exit 1
+		fi
+
+		if [ ! -x $file -a ! -e $file ]; then
+			echo "failed: file ${file} does not exist"
+			exit 1
+		fi
+	elif [ ! -x $file ]; then
+		echo "failed: file ${file} does not exist"
+		exit 1
+	fi
+
+	diff ${file} ${1}
+	if [ $? -ne 0 ]; then
+		echo "failed: ${file} do not match"
+		exit 1
+	fi
+
+	${perf} buildid-cache -l | grep ${id}
+	if [ $? -ne 0 ]; then
+		echo "failed: ${id} is not reported by \"perf buildid-cache -l\""
+		exit 1
+	fi
+
+	echo "OK for ${1}"
+}
+
+test_add()
+{
+	build_id_dir=$(mktemp -d /tmp/perf.debug.XXX)
+	perf="perf --buildid-dir ${build_id_dir}"
+
+	${perf} buildid-cache -v -a ${1}
+	if [ $? -ne 0 ]; then
+		echo "failed: add ${1} to build id cache"
+		exit 1
+	fi
+
+	check ${1}
+
+	rm -rf ${build_id_dir}
+}
+
+test_record()
+{
+	data=$(mktemp /tmp/perf.data.XXX)
+	build_id_dir=$(mktemp -d /tmp/perf.debug.XXX)
+	log=$(mktemp /tmp/perf.log.XXX)
+	perf="perf --buildid-dir ${build_id_dir}"
+
+	echo "running: perf record $@"
+	${perf} record --buildid-all -o ${data} $@ &> ${log}
+	if [ $? -ne 0 ]; then
+		echo "failed: record $@"
+		echo "see log: ${log}"
+		exit 1
+	fi
+
+	check ${@: -1}
+
+	rm -f ${log}
+	rm -rf ${build_id_dir}
+	rm -rf ${data}
+}
+
+# add binaries manual via perf buildid-cache -a
+test_add ${ex_sha1}
+test_add ${ex_md5}
+if [ ${add_pe} -eq 1 ]; then
+	test_add ${ex_pe}
+fi
+
+# add binaries via perf record post processing
+test_record ${ex_sha1}
+test_record ${ex_md5}
+if [ ${run_pe} -eq 1 ]; then
+	test_record wine ${ex_pe}
+fi
+
+# cleanup
+rm ${ex_sha1} ${ex_md5}
+if [ ${run_pe} -eq 1 ]; then
+	rm -r ${wineprefix}
+fi
+
+exit ${err}