Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 193 insertions, 0 deletions

diff --git a/tools/perf/ui/browsers/scripts.c b/tools/perf/ui/browsers/scripts.c
new file mode 100644
index 000000000..47d2c7a8c
--- /dev/null
+++ b/tools/perf/ui/browsers/scripts.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "../../builtin.h"
+#include "../../perf.h"
+#include "../../util/util.h" // perf_exe()
+#include "../util.h"
+#include "../../util/hist.h"
+#include "../../util/debug.h"
+#include "../../util/symbol.h"
+#include "../browser.h"
+#include "../libslang.h"
+#include "config.h"
+#include <linux/string.h>
+#include <linux/zalloc.h>
+#include <stdlib.h>
+
+#define SCRIPT_NAMELEN	128
+#define SCRIPT_MAX_NO	64
+/*
+ * Usually the full path for a script is:
+ *	/home/username/libexec/perf-core/scripts/python/xxx.py
+ *	/home/username/libexec/perf-core/scripts/perl/xxx.pl
+ * So 256 should be long enough to contain the full path.
+ */
+#define SCRIPT_FULLPATH_LEN	256
+
+struct script_config {
+	const char **names;
+	char **paths;
+	int index;
+	const char *perf;
+	char extra_format[256];
+};
+
+void attr_to_script(char *extra_format, struct perf_event_attr *attr)
+{
+	extra_format[0] = 0;
+	if (attr->read_format & PERF_FORMAT_GROUP)
+		strcat(extra_format, " -F +metric");
+	if (attr->sample_type & PERF_SAMPLE_BRANCH_STACK)
+		strcat(extra_format, " -F +brstackinsn --xed");
+	if (attr->sample_type & PERF_SAMPLE_REGS_INTR)
+		strcat(extra_format, " -F +iregs");
+	if (attr->sample_type & PERF_SAMPLE_REGS_USER)
+		strcat(extra_format, " -F +uregs");
+	if (attr->sample_type & PERF_SAMPLE_PHYS_ADDR)
+		strcat(extra_format, " -F +phys_addr");
+}
+
+static int add_script_option(const char *name, const char *opt,
+			     struct script_config *c)
+{
+	c->names[c->index] = name;
+	if (asprintf(&c->paths[c->index],
+		     "%s script %s -F +metric %s %s",
+		     c->perf, opt, symbol_conf.inline_name ? " --inline" : "",
+		     c->extra_format) < 0)
+		return -1;
+	c->index++;
+	return 0;
+}
+
+static int scripts_config(const char *var, const char *value, void *data)
+{
+	struct script_config *c = data;
+
+	if (!strstarts(var, "scripts."))
+		return -1;
+	if (c->index >= SCRIPT_MAX_NO)
+		return -1;
+	c->names[c->index] = strdup(var + 7);
+	if (!c->names[c->index])
+		return -1;
+	if (asprintf(&c->paths[c->index], "%s %s", value,
+		     c->extra_format) < 0)
+		return -1;
+	c->index++;
+	return 0;
+}
+
+/*
+ * When success, will copy the full path of the selected script
+ * into  the buffer pointed by script_name, and return 0.
+ * Return -1 on failure.
+ */
+static int list_scripts(char *script_name, bool *custom,
+			struct evsel *evsel)
+{
+	char *buf, *paths[SCRIPT_MAX_NO], *names[SCRIPT_MAX_NO];
+	int i, num, choice;
+	int ret = 0;
+	int max_std, custom_perf;
+	char pbuf[256];
+	const char *perf = perf_exe(pbuf, sizeof pbuf);
+	struct script_config scriptc = {
+		.names = (const char **)names,
+		.paths = paths,
+		.perf = perf
+	};
+
+	script_name[0] = 0;
+
+	/* Preset the script name to SCRIPT_NAMELEN */
+	buf = malloc(SCRIPT_MAX_NO * (SCRIPT_NAMELEN + SCRIPT_FULLPATH_LEN));
+	if (!buf)
+		return -1;
+
+	if (evsel)
+		attr_to_script(scriptc.extra_format, &evsel->core.attr);
+	add_script_option("Show individual samples", "", &scriptc);
+	add_script_option("Show individual samples with assembler", "-F +insn --xed",
+			  &scriptc);
+	add_script_option("Show individual samples with source", "-F +srcline,+srccode",
+			  &scriptc);
+	perf_config(scripts_config, &scriptc);
+	custom_perf = scriptc.index;
+	add_script_option("Show samples with custom perf script arguments", "", &scriptc);
+	i = scriptc.index;
+	max_std = i;
+
+	for (; i < SCRIPT_MAX_NO; i++) {
+		names[i] = buf + (i - max_std) * (SCRIPT_NAMELEN + SCRIPT_FULLPATH_LEN);
+		paths[i] = names[i] + SCRIPT_NAMELEN;
+	}
+
+	num = find_scripts(names + max_std, paths + max_std, SCRIPT_MAX_NO - max_std,
+			SCRIPT_FULLPATH_LEN);
+	if (num < 0)
+		num = 0;
+	choice = ui__popup_menu(num + max_std, (char * const *)names, NULL);
+	if (choice < 0) {
+		ret = -1;
+		goto out;
+	}
+	if (choice == custom_perf) {
+		char script_args[50];
+		int key = ui_browser__input_window("perf script command",
+				"Enter perf script command line (without perf script prefix)",
+				script_args, "", 0);
+		if (key != K_ENTER) {
+			ret = -1;
+			goto out;
+		}
+		sprintf(script_name, "%s script %s", perf, script_args);
+	} else if (choice < num + max_std) {
+		strcpy(script_name, paths[choice]);
+	}
+	*custom = choice >= max_std;
+
+out:
+	free(buf);
+	for (i = 0; i < max_std; i++)
+		zfree(&paths[i]);
+	return ret;
+}
+
+void run_script(char *cmd)
+{
+	pr_debug("Running %s\n", cmd);
+	SLang_reset_tty();
+	if (system(cmd) < 0)
+		pr_warning("Cannot run %s\n", cmd);
+	/*
+	 * SLang doesn't seem to reset the whole terminal, so be more
+	 * forceful to get back to the original state.
+	 */
+	printf("\033[c\033[H\033[J");
+	fflush(stdout);
+	SLang_init_tty(0, 0, 0);
+	SLsmg_refresh();
+}
+
+int script_browse(const char *script_opt, struct evsel *evsel)
+{
+	char *cmd, script_name[SCRIPT_FULLPATH_LEN];
+	bool custom = false;
+
+	memset(script_name, 0, SCRIPT_FULLPATH_LEN);
+	if (list_scripts(script_name, &custom, evsel))
+		return -1;
+
+	if (asprintf(&cmd, "%s%s %s %s%s 2>&1 | less",
+			custom ? "perf script -s " : "",
+			script_name,
+			script_opt ? script_opt : "",
+			input_name ? "-i " : "",
+			input_name ? input_name : "") < 0)
+		return -1;
+
+	run_script(cmd);
+	free(cmd);
+
+	return 0;
+}