Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 301 insertions, 0 deletions

diff --git a/tools/perf/util/expr.y b/tools/perf/util/expr.y
new file mode 100644
index 000000000..635e56235
--- /dev/null
+++ b/tools/perf/util/expr.y
@@ -0,0 +1,301 @@
+/* Simple expression parser */
+%{
+#define YYDEBUG 1
+#include <assert.h>
+#include <math.h>
+#include <stdlib.h>
+#include "util/debug.h"
+#define IN_EXPR_Y 1
+#include "expr.h"
+%}
+
+%define api.pure full
+
+%parse-param { double *final_val }
+%parse-param { struct expr_parse_ctx *ctx }
+%parse-param { bool compute_ids }
+%parse-param {void *scanner}
+%lex-param {void* scanner}
+
+%union {
+	double	 num;
+	char	*str;
+	struct ids {
+		/*
+		 * When creating ids, holds the working set of event ids. NULL
+		 * implies the set is empty.
+		 */
+		struct hashmap *ids;
+		/*
+		 * The metric value. When not creating ids this is the value
+		 * read from a counter, a constant or some computed value. When
+		 * creating ids the value is either a constant or BOTTOM. NAN is
+		 * used as the special BOTTOM value, representing a "set of all
+		 * values" case.
+		 */
+		double val;
+	} ids;
+}
+
+%token ID NUMBER MIN MAX IF ELSE LITERAL D_RATIO SOURCE_COUNT EXPR_ERROR
+%left MIN MAX IF
+%left '|'
+%left '^'
+%left '&'
+%left '<' '>'
+%left '-' '+'
+%left '*' '/' '%'
+%left NEG NOT
+%type <num> NUMBER LITERAL
+%type <str> ID
+%destructor { free ($$); } <str>
+%type <ids> expr if_expr
+%destructor { ids__free($$.ids); } <ids>
+
+%{
+static void expr_error(double *final_val __maybe_unused,
+		       struct expr_parse_ctx *ctx __maybe_unused,
+		       bool compute_ids __maybe_unused,
+		       void *scanner,
+		       const char *s)
+{
+	pr_debug("%s\n", s);
+}
+
+/*
+ * During compute ids, the special "bottom" value uses NAN to represent the set
+ * of all values. NAN is selected as it isn't a useful constant value.
+ */
+#define BOTTOM NAN
+
+/* During computing ids, does val represent a constant (non-BOTTOM) value? */
+static bool is_const(double val)
+{
+	return isfinite(val);
+}
+
+static struct ids union_expr(struct ids ids1, struct ids ids2)
+{
+	struct ids result = {
+		.val = BOTTOM,
+		.ids = ids__union(ids1.ids, ids2.ids),
+	};
+	return result;
+}
+
+static struct ids handle_id(struct expr_parse_ctx *ctx, char *id,
+			    bool compute_ids, bool source_count)
+{
+	struct ids result;
+
+	if (!compute_ids) {
+		/*
+		 * Compute the event's value from ID. If the ID isn't known then
+		 * it isn't used to compute the formula so set to NAN.
+		 */
+		struct expr_id_data *data;
+
+		result.val = NAN;
+		if (expr__resolve_id(ctx, id, &data) == 0) {
+			result.val = source_count
+				? expr_id_data__source_count(data)
+				: expr_id_data__value(data);
+		}
+		result.ids = NULL;
+		free(id);
+	} else {
+		/*
+		 * Set the value to BOTTOM to show that any value is possible
+		 * when the event is computed. Create a set of just the ID.
+		 */
+		result.val = BOTTOM;
+		result.ids = ids__new();
+		if (!result.ids || ids__insert(result.ids, id)) {
+			pr_err("Error creating IDs for '%s'", id);
+			free(id);
+		}
+	}
+	return result;
+}
+
+/*
+ * If we're not computing ids or $1 and $3 are constants, compute the new
+ * constant value using OP. Its invariant that there are no ids.  If computing
+ * ids for non-constants union the set of IDs that must be computed.
+ */
+#define BINARY_LONG_OP(RESULT, OP, LHS, RHS)				\
+	if (!compute_ids || (is_const(LHS.val) && is_const(RHS.val))) { \
+		assert(LHS.ids == NULL);				\
+		assert(RHS.ids == NULL);				\
+		RESULT.val = (long)LHS.val OP (long)RHS.val;		\
+		RESULT.ids = NULL;					\
+	} else {							\
+	        RESULT = union_expr(LHS, RHS);				\
+	}
+
+#define BINARY_OP(RESULT, OP, LHS, RHS)					\
+	if (!compute_ids || (is_const(LHS.val) && is_const(RHS.val))) { \
+		assert(LHS.ids == NULL);				\
+		assert(RHS.ids == NULL);				\
+		RESULT.val = LHS.val OP RHS.val;			\
+		RESULT.ids = NULL;					\
+	} else {							\
+	        RESULT = union_expr(LHS, RHS);				\
+	}
+
+%}
+%%
+
+start: if_expr
+{
+	if (compute_ids)
+		ctx->ids = ids__union($1.ids, ctx->ids);
+
+	if (final_val)
+		*final_val = $1.val;
+}
+;
+
+if_expr: expr IF expr ELSE if_expr
+{
+	if (fpclassify($3.val) == FP_ZERO) {
+		/*
+		 * The IF expression evaluated to 0 so treat as false, take the
+		 * ELSE and discard everything else.
+		 */
+		$$.val = $5.val;
+		$$.ids = $5.ids;
+		ids__free($1.ids);
+		ids__free($3.ids);
+	} else if (!compute_ids || is_const($3.val)) {
+		/*
+		 * If ids aren't computed then treat the expression as true. If
+		 * ids are being computed and the IF expr is a non-zero
+		 * constant, then also evaluate the true case.
+		 */
+		$$.val = $1.val;
+		$$.ids = $1.ids;
+		ids__free($3.ids);
+		ids__free($5.ids);
+	} else if ($1.val == $5.val) {
+		/*
+		 * LHS == RHS, so both are an identical constant. No need to
+		 * evaluate any events.
+		 */
+		$$.val = $1.val;
+		$$.ids = NULL;
+		ids__free($1.ids);
+		ids__free($3.ids);
+		ids__free($5.ids);
+	} else {
+		/*
+		 * Value is either the LHS or RHS and we need the IF expression
+		 * to compute it.
+		 */
+		$$ = union_expr($1, union_expr($3, $5));
+	}
+}
+| expr
+;
+
+expr: NUMBER
+{
+	$$.val = $1;
+	$$.ids = NULL;
+}
+| ID				{ $$ = handle_id(ctx, $1, compute_ids, /*source_count=*/false); }
+| SOURCE_COUNT '(' ID ')'	{ $$ = handle_id(ctx, $3, compute_ids, /*source_count=*/true); }
+| expr '|' expr { BINARY_LONG_OP($$, |, $1, $3); }
+| expr '&' expr { BINARY_LONG_OP($$, &, $1, $3); }
+| expr '^' expr { BINARY_LONG_OP($$, ^, $1, $3); }
+| expr '<' expr { BINARY_OP($$, <, $1, $3); }
+| expr '>' expr { BINARY_OP($$, >, $1, $3); }
+| expr '+' expr { BINARY_OP($$, +, $1, $3); }
+| expr '-' expr { BINARY_OP($$, -, $1, $3); }
+| expr '*' expr { BINARY_OP($$, *, $1, $3); }
+| expr '/' expr
+{
+	if (fpclassify($3.val) == FP_ZERO) {
+		pr_debug("division by zero\n");
+		YYABORT;
+	} else if (!compute_ids || (is_const($1.val) && is_const($3.val))) {
+		assert($1.ids == NULL);
+		assert($3.ids == NULL);
+		$$.val = $1.val / $3.val;
+		$$.ids = NULL;
+	} else {
+		/* LHS and/or RHS need computing from event IDs so union. */
+		$$ = union_expr($1, $3);
+	}
+}
+| expr '%' expr
+{
+	if (fpclassify($3.val) == FP_ZERO) {
+		pr_debug("division by zero\n");
+		YYABORT;
+	} else if (!compute_ids || (is_const($1.val) && is_const($3.val))) {
+		assert($1.ids == NULL);
+		assert($3.ids == NULL);
+		$$.val = (long)$1.val % (long)$3.val;
+		$$.ids = NULL;
+	} else {
+		/* LHS and/or RHS need computing from event IDs so union. */
+		$$ = union_expr($1, $3);
+	}
+}
+| D_RATIO '(' expr ',' expr ')'
+{
+	if (fpclassify($5.val) == FP_ZERO) {
+		/*
+		 * Division by constant zero always yields zero and no events
+		 * are necessary.
+		 */
+		assert($5.ids == NULL);
+		$$.val = 0.0;
+		$$.ids = NULL;
+		ids__free($3.ids);
+	} else if (!compute_ids || (is_const($3.val) && is_const($5.val))) {
+		assert($3.ids == NULL);
+		assert($5.ids == NULL);
+		$$.val = $3.val / $5.val;
+		$$.ids = NULL;
+	} else {
+		/* LHS and/or RHS need computing from event IDs so union. */
+		$$ = union_expr($3, $5);
+	}
+}
+| '-' expr %prec NEG
+{
+	$$.val = -$2.val;
+	$$.ids = $2.ids;
+}
+| '(' if_expr ')'
+{
+	$$ = $2;
+}
+| MIN '(' expr ',' expr ')'
+{
+	if (!compute_ids) {
+		$$.val = $3.val < $5.val ? $3.val : $5.val;
+		$$.ids = NULL;
+	} else {
+		$$ = union_expr($3, $5);
+	}
+}
+| MAX '(' expr ',' expr ')'
+{
+	if (!compute_ids) {
+		$$.val = $3.val > $5.val ? $3.val : $5.val;
+		$$.ids = NULL;
+	} else {
+		$$ = union_expr($3, $5);
+	}
+}
+| LITERAL
+{
+	$$.val = $1;
+	$$.ids = NULL;
+}
+;
+
+%%