Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 264 insertions, 0 deletions

diff --git a/tools/power/acpi/man/acpidump.8 b/tools/power/acpi/man/acpidump.8
new file mode 100644
index 000000000..79e2d1d43
--- /dev/null
+++ b/tools/power/acpi/man/acpidump.8
@@ -0,0 +1,127 @@
+.TH ACPIDUMP 8
+.SH NAME
+acpidump \- dump a system's ACPI tables to an ASCII file
+
+.SH SYNOPSIS
+.B acpidump
+.RI [ options ]
+.br
+
+.SH DESCRIPTION
+.B acpidump
+dumps the systems ACPI tables to an ASCII file appropriate for
+attaching to a bug report.
+
+Subsequently, they can be processed by utilities in the ACPICA package.
+
+.SH OPTIONS
+acpidump options are as follow:
+.TP
+.B Options
+.TP
+.B \-b
+Dump tables to binary files
+.TP
+.B \-h \-?
+This help message
+.TP
+.B \-o <File>
+Redirect output to file
+.TP
+.B \-r <Address>
+Dump tables from specified RSDP
+.TP
+.B \-s
+Print table summaries only
+.TP
+.B \-v
+Display version information
+.TP
+.B \-z
+Verbose mode
+.TP
+.B Table Options
+.TP
+.B \-a <Address>
+Get table via a physical address
+.TP
+.B \-c <on|off>
+Turning on/off customized table dumping
+.TP
+.B \-f <BinaryFile>
+Get table via a binary file
+.TP
+.B \-n <Signature>
+Get table via a name/signature
+.TP
+.B \-x
+Do not use but dump XSDT
+.TP
+.B \-x \-x
+Do not use or dump XSDT
+.TP
+.fi
+Invocation without parameters dumps all available tables.
+.TP
+Multiple mixed instances of -a, -f, and -n are supported.
+
+.SH EXAMPLES
+
+.nf
+# acpidump > acpidump.out
+
+$ acpixtract -a acpidump.out
+        Acpi table [DSDT] -  15974 bytes written to DSDT.dat
+        Acpi table [FACS] -     64 bytes written to FACS.dat
+        Acpi table [FACP] -    116 bytes written to FACP.dat
+        Acpi table [APIC] -    120 bytes written to APIC.dat
+        Acpi table [MCFG] -     60 bytes written to MCFG.dat
+        Acpi table [SSDT] -    444 bytes written to SSDT1.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT2.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT3.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT4.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT5.dat
+        Acpi table [RSDT] -     76 bytes written to RSDT.dat
+        Acpi table [RSDP] -     20 bytes written to RSDP.dat
+
+$ iasl -d *.dat
+...
+.fi
+creates *.dsl, a human readable form which can be edited
+and compiled using iasl.
+
+
+.SH NOTES
+
+.B "acpidump "
+must be run as root.
+
+.SH REFERENCES
+ACPICA: https://acpica.org/
+
+.SH FILES
+.ta
+.nf
+/dev/mem
+/sys/firmware/acpi/tables/*
+/sys/firmware/acpi/tables/dynamic/*
+/sys/firmware/efi/systab
+.fi
+
+.SH AUTHOR
+.TP
+Original by:
+ Len Brown <len.brown@intel.com>
+.TP
+Written by:
+ Chao Guan <chao.guan@intel.com>
+.TP
+Updated by:
+ Bob Moore <robert.moore@intel.com>
+ Lv Zheng <lv.zheng@intel.com>
+
+.SH SEE ALSO
+\&\fIacpixtract\fR\|(8), \fIiasl\fR\|(8).
+
+.SH COPYRIGHT
+COPYRIGHT (c) 2013, Intel Corporation.
diff --git a/tools/power/acpi/man/pfrut.8 b/tools/power/acpi/man/pfrut.8
new file mode 100644
index 000000000..3db574770
--- /dev/null
+++ b/tools/power/acpi/man/pfrut.8
@@ -0,0 +1,137 @@
+.TH "PFRUT" "8" "October 2021" "pfrut 1.0" ""
+.hy
+.SH Name
+.PP
+pfrut \- Platform Firmware Runtime Update and Telemetry tool
+.SH SYNOPSIS
+.PP
+\f[B]pfrut\f[R] [\f[I]Options\f[R]]
+.SH DESCRIPTION
+.PP
+The PFRUT(Platform Firmware Runtime Update and Telemetry) kernel interface is designed
+to
+.PD 0
+.P
+.PD
+interact with the platform firmware interface defined in the
+.PD 0
+.P
+.PD
+Management Mode Firmware Runtime
+Update (https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf)
+.PD 0
+.P
+.PD
+\f[B]pfrut\f[R] is the tool to interact with the kernel interface.
+.PD 0
+.P
+.PD
+.SH OPTIONS
+.TP
+.B \f[B]\-h\f[R], \f[B]\-\-help\f[R]
+Display helper information.
+.TP
+.B \f[B]\-l\f[R], \f[B]\-\-load\f[R]
+Load the capsule file into the system.
+To be more specific, the capsule file will be copied to the
+communication buffer.
+.TP
+.B \f[B]\-s\f[R], \f[B]\-\-stage\f[R]
+Stage the capsule image from communication buffer into Management Mode
+and perform authentication.
+.TP
+.B \f[B]\-a\f[R], \f[B]\-\-activate\f[R]
+Activate a previous staged capsule image.
+.TP
+.B \f[B]\-u\f[R], \f[B]\-\-update\f[R]
+Perform both stage and activation actions.
+.TP
+.B \f[B]\-q\f[R], \f[B]\-\-query\f[R]
+Query the update capability.
+.TP
+.B \f[B]\-d\f[R], \f[B]\-\-setrev\f[R]
+Set the revision ID of code injection/driver update.
+.TP
+.B \f[B]\-D\f[R], \f[B]\-\-setrevlog\f[R]
+Set the revision ID of telemetry.
+.TP
+.B \f[B]\-G\f[R], \f[B]\-\-getloginfo\f[R]
+Get telemetry log information and print it out.
+.TP
+.B \f[B]\-T\f[R], \f[B]\-\-type\f[R]
+Set the telemetry log data type.
+.TP
+.B \f[B]\-L\f[R], \f[B]\-\-level\f[R]
+Set the telemetry log level.
+.TP
+.B \f[B]\-R\f[R], \f[B]\-\-read\f[R]
+Read all the telemetry data and print it out.
+.SH EXAMPLES
+.PP
+\f[B]pfrut \-G\f[R]
+.PP
+log_level:4
+.PD 0
+.P
+.PD
+log_type:0
+.PD 0
+.P
+.PD
+log_revid:2
+.PD 0
+.P
+.PD
+max_data_size:65536
+.PD 0
+.P
+.PD
+chunk1_size:0
+.PD 0
+.P
+.PD
+chunk2_size:1401
+.PD 0
+.P
+.PD
+rollover_cnt:0
+.PD 0
+.P
+.PD
+reset_cnt:4
+.PP
+\f[B]pfru \-q\f[R]
+.PP
+code injection image type:794bf8b2\-6e7b\-454e\-885f\-3fb9bb185402
+.PD 0
+.P
+.PD
+fw_version:0
+.PD 0
+.P
+.PD
+code_rt_version:1
+.PD 0
+.P
+.PD
+driver update image type:0e5f0b14\-f849\-7945\-ad81\-bc7b6d2bb245
+.PD 0
+.P
+.PD
+drv_rt_version:0
+.PD 0
+.P
+.PD
+drv_svn:0
+.PD 0
+.P
+.PD
+platform id:39214663\-b1a8\-4eaa\-9024\-f2bb53ea4723
+.PD 0
+.P
+.PD
+oem id:a36db54f\-ea2a\-e14e\-b7c4\-b5780e51ba3d
+.PP
+\f[B]pfrut \-l yours.cap \-u \-T 1 \-L 4\f[R]
+.SH AUTHORS
+Chen Yu.