Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 261 insertions, 0 deletions

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
new file mode 100644
index 000000000..41b649452
--- /dev/null
+++ b/tools/testing/selftests/Makefile
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0
+TARGETS += alsa
+TARGETS += amd-pstate
+TARGETS += arm64
+TARGETS += bpf
+TARGETS += breakpoints
+TARGETS += capabilities
+TARGETS += cgroup
+TARGETS += clone3
+TARGETS += core
+TARGETS += cpufreq
+TARGETS += cpu-hotplug
+TARGETS += damon
+TARGETS += drivers/dma-buf
+TARGETS += drivers/s390x/uvdevice
+TARGETS += drivers/net/bonding
+TARGETS += drivers/net/team
+TARGETS += efivarfs
+TARGETS += exec
+TARGETS += filesystems
+TARGETS += filesystems/binderfs
+TARGETS += filesystems/epoll
+TARGETS += filesystems/fat
+TARGETS += firmware
+TARGETS += fpu
+TARGETS += ftrace
+TARGETS += futex
+TARGETS += gpio
+TARGETS += intel_pstate
+TARGETS += iommu
+TARGETS += ipc
+TARGETS += ir
+TARGETS += kcmp
+TARGETS += kexec
+TARGETS += kvm
+TARGETS += landlock
+TARGETS += lib
+TARGETS += livepatch
+TARGETS += lkdtm
+TARGETS += membarrier
+TARGETS += memfd
+TARGETS += memory-hotplug
+TARGETS += mincore
+TARGETS += mount
+TARGETS += mount_setattr
+TARGETS += move_mount_set_group
+TARGETS += mqueue
+TARGETS += nci
+TARGETS += net
+TARGETS += net/af_unix
+TARGETS += net/forwarding
+TARGETS += net/hsr
+TARGETS += net/mptcp
+TARGETS += net/openvswitch
+TARGETS += netfilter
+TARGETS += nsfs
+TARGETS += pidfd
+TARGETS += pid_namespace
+TARGETS += powerpc
+TARGETS += proc
+TARGETS += pstore
+TARGETS += ptrace
+TARGETS += openat2
+TARGETS += resctrl
+TARGETS += rlimits
+TARGETS += rseq
+TARGETS += rtc
+TARGETS += seccomp
+TARGETS += sgx
+TARGETS += sigaltstack
+TARGETS += size
+TARGETS += sparc64
+TARGETS += splice
+TARGETS += static_keys
+TARGETS += sync
+TARGETS += syscall_user_dispatch
+TARGETS += sysctl
+TARGETS += tc-testing
+TARGETS += tdx
+TARGETS += timens
+ifneq (1, $(quicktest))
+TARGETS += timers
+endif
+TARGETS += tmpfs
+TARGETS += tpm2
+TARGETS += user
+TARGETS += vDSO
+TARGETS += vm
+TARGETS += x86
+TARGETS += zram
+#Please keep the TARGETS list alphabetically sorted
+# Run "make quicktest=1 run_tests" or
+# "make quicktest=1 kselftest" from top level Makefile
+
+TARGETS_HOTPLUG = cpu-hotplug
+TARGETS_HOTPLUG += memory-hotplug
+
+# User can optionally provide a TARGETS skiplist.  By default we skip
+# BPF since it has cutting edge build time dependencies which require
+# more effort to install.
+SKIP_TARGETS ?= bpf
+ifneq ($(SKIP_TARGETS),)
+	TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
+	override TARGETS := $(TMP)
+endif
+
+# User can set FORCE_TARGETS to 1 to require all targets to be successfully
+# built; make will fail if any of the targets cannot be built. If
+# FORCE_TARGETS is not set (the default), make will succeed if at least one
+# of the targets gets built.
+FORCE_TARGETS ?=
+
+# Clear LDFLAGS and MAKEFLAGS when implicit rules are missing.  This provides
+# implicit rules to sub-test Makefiles which avoids build failures in test
+# Makefile that don't have explicit build rules.
+ifeq (,$(LINK.c))
+override LDFLAGS =
+override MAKEFLAGS =
+endif
+
+# Append kselftest to KBUILD_OUTPUT and O to avoid cluttering
+# KBUILD_OUTPUT with selftest objects and headers installed
+# by selftests Makefile or lib.mk.
+ifdef building_out_of_srctree
+override LDFLAGS =
+endif
+
+top_srcdir ?= ../../..
+
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
+
+ifneq ($(KBUILD_OUTPUT),)
+  # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
+  # expand a shell special character '~'. We use a somewhat tedious way here.
+  abs_objtree := $(shell cd $(top_srcdir) && mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd)
+  $(if $(abs_objtree),, \
+    $(error failed to create output directory "$(KBUILD_OUTPUT)"))
+  # $(realpath ...) resolves symlinks
+  abs_objtree := $(realpath $(abs_objtree))
+  BUILD := $(abs_objtree)/kselftest
+  KHDR_INCLUDES := -isystem ${abs_objtree}/usr/include
+else
+  BUILD := $(CURDIR)
+  abs_srctree := $(shell cd $(top_srcdir) && pwd)
+  KHDR_INCLUDES := -isystem ${abs_srctree}/usr/include
+  DEFAULT_INSTALL_HDR_PATH := 1
+endif
+
+# Prepare for headers install
+include $(top_srcdir)/scripts/subarch.include
+ARCH           ?= $(SUBARCH)
+export BUILD
+export KHDR_INCLUDES
+
+# set default goal to all, so make without a target runs all, even when
+# all isn't the first target in the file.
+.DEFAULT_GOAL := all
+
+all:
+	@ret=1;							\
+	for TARGET in $(TARGETS); do				\
+		BUILD_TARGET=$$BUILD/$$TARGET;			\
+		mkdir $$BUILD_TARGET  -p;			\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET	\
+				O=$(abs_objtree)		\
+				$(if $(FORCE_TARGETS),|| exit);	\
+		ret=$$((ret * $$?));				\
+	done; exit $$ret;
+
+run_tests: all
+	@for TARGET in $(TARGETS); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests \
+				O=$(abs_objtree);		    \
+	done;
+
+hotplug:
+	@for TARGET in $(TARGETS_HOTPLUG); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+	done;
+
+run_hotplug: hotplug
+	@for TARGET in $(TARGETS_HOTPLUG); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
+	done;
+
+clean_hotplug:
+	@for TARGET in $(TARGETS_HOTPLUG); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+	done;
+
+run_pstore_crash:
+	$(MAKE) -C pstore run_crash
+
+# Use $BUILD as the default install root. $BUILD points to the
+# right output location for the following cases:
+# 1. output_dir=kernel_src
+# 2. a separate output directory is specified using O= KBUILD_OUTPUT
+# 3. a separate output directory is specified using KBUILD_OUTPUT
+# Avoid conflict with INSTALL_PATH set by the main Makefile
+#
+KSFT_INSTALL_PATH ?= $(BUILD)/kselftest_install
+KSFT_INSTALL_PATH := $(abspath $(KSFT_INSTALL_PATH))
+# Avoid changing the rest of the logic here and lib.mk.
+INSTALL_PATH := $(KSFT_INSTALL_PATH)
+ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
+TEST_LIST := $(INSTALL_PATH)/kselftest-list.txt
+
+install: all
+ifdef INSTALL_PATH
+	@# Ask all targets to install their files
+	mkdir -p $(INSTALL_PATH)/kselftest
+	install -m 744 kselftest/module.sh $(INSTALL_PATH)/kselftest/
+	install -m 744 kselftest/runner.sh $(INSTALL_PATH)/kselftest/
+	install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
+	install -m 744 run_kselftest.sh $(INSTALL_PATH)/
+	rm -f $(TEST_LIST)
+	@ret=1;	\
+	for TARGET in $(TARGETS); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install \
+				O=$(abs_objtree)		\
+				$(if $(FORCE_TARGETS),|| exit);	\
+		ret=$$((ret * $$?));		\
+	done; exit $$ret;
+
+
+	@# Ask all targets to emit their test scripts
+	@# While building kselftest-list.text skip also non-existent TARGET dirs:
+	@# they could be the result of a build failure and should NOT be
+	@# included in the generated runlist.
+	for TARGET in $(TARGETS); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		[ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
+		echo -ne "Emit Tests for $$TARGET\n"; \
+		$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
+			-C $$TARGET emit_tests >> $(TEST_LIST); \
+	done;
+else
+	$(error Error: set INSTALL_PATH to use install)
+endif
+
+FORMAT ?= .gz
+TAR_PATH = $(abspath ${INSTALL_PATH}/kselftest-packages/kselftest.tar${FORMAT})
+gen_tar: install
+	@mkdir -p ${INSTALL_PATH}/kselftest-packages/
+	@tar caf ${TAR_PATH} --exclude=kselftest-packages -C ${INSTALL_PATH} .
+	@echo "Created ${TAR_PATH}"
+
+clean:
+	@for TARGET in $(TARGETS); do \
+		BUILD_TARGET=$$BUILD/$$TARGET;	\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+	done;
+
+.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean gen_tar