Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 362 insertions, 0 deletions

diff --git a/tools/testing/selftests/arm64/abi/syscall-abi-asm.S b/tools/testing/selftests/arm64/abi/syscall-abi-asm.S
new file mode 100644
index 000000000..df3230fda
--- /dev/null
+++ b/tools/testing/selftests/arm64/abi/syscall-abi-asm.S
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2021 ARM Limited.
+//
+// Assembly portion of the syscall ABI test
+
+//
+// Load values from memory into registers, invoke a syscall and save the
+// register values back to memory for later checking.  The syscall to be
+// invoked is configured in x8 of the input GPR data.
+//
+// x0:	SVE VL, 0 for FP only
+// x1:	SME VL
+//
+//	GPRs:	gpr_in, gpr_out
+//	FPRs:	fpr_in, fpr_out
+//	Zn:	z_in, z_out
+//	Pn:	p_in, p_out
+//	FFR:	ffr_in, ffr_out
+//	ZA:	za_in, za_out
+//	SVCR:	svcr_in, svcr_out
+
+#include "syscall-abi.h"
+
+.arch_extension sve
+
+#define ID_AA64SMFR0_EL1_SMEver_SHIFT           56
+#define ID_AA64SMFR0_EL1_SMEver_WIDTH           4
+
+/*
+ * LDR (vector to ZA array):
+ *	LDR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _ldr_za nw, nxbase, offset=0
+	.inst	0xe1000000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * STR (vector from ZA array):
+ *	STR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _str_za nw, nxbase, offset=0
+	.inst	0xe1200000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * LDR (ZT0)
+ *
+ *	LDR ZT0, nx
+ */
+.macro _ldr_zt nx
+	.inst	0xe11f8000			\
+		| (((\nx) & 0x1f) << 5)
+.endm
+
+/*
+ * STR (ZT0)
+ *
+ *	STR ZT0, nx
+ */
+.macro _str_zt nx
+	.inst	0xe13f8000			\
+		| (((\nx) & 0x1f) << 5)
+.endm
+
+.globl do_syscall
+do_syscall:
+	// Store callee saved registers x19-x29 (80 bytes) plus x0 and x1
+	stp	x29, x30, [sp, #-112]!
+	mov	x29, sp
+	stp	x0, x1, [sp, #16]
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	// Set SVCR if we're doing SME
+	cbz	x1, 1f
+	adrp	x2, svcr_in
+	ldr	x2, [x2, :lo12:svcr_in]
+	msr	S3_3_C4_C2_2, x2
+1:
+
+	// Load ZA and ZT0 if enabled - uses x12 as scratch due to SME LDR
+	tbz	x2, #SVCR_ZA_SHIFT, 1f
+	mov	w12, #0
+	ldr	x2, =za_in
+2:	_ldr_za 12, 2
+	add	x2, x2, x1
+	add	x12, x12, #1
+	cmp	x1, x12
+	bne	2b
+
+	// ZT0
+	mrs	x2, S3_0_C0_C4_5	// ID_AA64SMFR0_EL1
+	ubfx	x2, x2, #ID_AA64SMFR0_EL1_SMEver_SHIFT, \
+			 #ID_AA64SMFR0_EL1_SMEver_WIDTH
+	cbz	x2, 1f
+	adrp	x2, zt_in
+	add	x2, x2, :lo12:zt_in
+	_ldr_zt 2
+1:
+
+	// Load GPRs x8-x28, and save our SP/FP for later comparison
+	ldr	x2, =gpr_in
+	add	x2, x2, #64
+	ldp	x8, x9, [x2], #16
+	ldp	x10, x11, [x2], #16
+	ldp	x12, x13, [x2], #16
+	ldp	x14, x15, [x2], #16
+	ldp	x16, x17, [x2], #16
+	ldp	x18, x19, [x2], #16
+	ldp	x20, x21, [x2], #16
+	ldp	x22, x23, [x2], #16
+	ldp	x24, x25, [x2], #16
+	ldp	x26, x27, [x2], #16
+	ldr	x28, [x2], #8
+	str	x29, [x2], #8		// FP
+	str	x30, [x2], #8		// LR
+
+	// Load FPRs if we're not doing neither SVE nor streaming SVE
+	cbnz	x0, 1f
+	ldr	x2, =svcr_in
+	tbnz	x2, #SVCR_SM_SHIFT, 1f
+
+	ldr	x2, =fpr_in
+	ldp	q0, q1, [x2]
+	ldp	q2, q3, [x2, #16 * 2]
+	ldp	q4, q5, [x2, #16 * 4]
+	ldp	q6, q7, [x2, #16 * 6]
+	ldp	q8, q9, [x2, #16 * 8]
+	ldp	q10, q11, [x2, #16 * 10]
+	ldp	q12, q13, [x2, #16 * 12]
+	ldp	q14, q15, [x2, #16 * 14]
+	ldp	q16, q17, [x2, #16 * 16]
+	ldp	q18, q19, [x2, #16 * 18]
+	ldp	q20, q21, [x2, #16 * 20]
+	ldp	q22, q23, [x2, #16 * 22]
+	ldp	q24, q25, [x2, #16 * 24]
+	ldp	q26, q27, [x2, #16 * 26]
+	ldp	q28, q29, [x2, #16 * 28]
+	ldp	q30, q31, [x2, #16 * 30]
+
+	b	2f
+1:
+
+	// Load the SVE registers if we're doing SVE/SME
+
+	ldr	x2, =z_in
+	ldr	z0, [x2, #0, MUL VL]
+	ldr	z1, [x2, #1, MUL VL]
+	ldr	z2, [x2, #2, MUL VL]
+	ldr	z3, [x2, #3, MUL VL]
+	ldr	z4, [x2, #4, MUL VL]
+	ldr	z5, [x2, #5, MUL VL]
+	ldr	z6, [x2, #6, MUL VL]
+	ldr	z7, [x2, #7, MUL VL]
+	ldr	z8, [x2, #8, MUL VL]
+	ldr	z9, [x2, #9, MUL VL]
+	ldr	z10, [x2, #10, MUL VL]
+	ldr	z11, [x2, #11, MUL VL]
+	ldr	z12, [x2, #12, MUL VL]
+	ldr	z13, [x2, #13, MUL VL]
+	ldr	z14, [x2, #14, MUL VL]
+	ldr	z15, [x2, #15, MUL VL]
+	ldr	z16, [x2, #16, MUL VL]
+	ldr	z17, [x2, #17, MUL VL]
+	ldr	z18, [x2, #18, MUL VL]
+	ldr	z19, [x2, #19, MUL VL]
+	ldr	z20, [x2, #20, MUL VL]
+	ldr	z21, [x2, #21, MUL VL]
+	ldr	z22, [x2, #22, MUL VL]
+	ldr	z23, [x2, #23, MUL VL]
+	ldr	z24, [x2, #24, MUL VL]
+	ldr	z25, [x2, #25, MUL VL]
+	ldr	z26, [x2, #26, MUL VL]
+	ldr	z27, [x2, #27, MUL VL]
+	ldr	z28, [x2, #28, MUL VL]
+	ldr	z29, [x2, #29, MUL VL]
+	ldr	z30, [x2, #30, MUL VL]
+	ldr	z31, [x2, #31, MUL VL]
+
+	// Only set a non-zero FFR, test patterns must be zero since the
+	// syscall should clear it - this lets us handle FA64.
+	ldr	x2, =ffr_in
+	ldr	p0, [x2]
+	ldr	x2, [x2, #0]
+	cbz	x2, 1f
+	wrffr	p0.b
+1:
+
+	ldr	x2, =p_in
+	ldr	p0, [x2, #0, MUL VL]
+	ldr	p1, [x2, #1, MUL VL]
+	ldr	p2, [x2, #2, MUL VL]
+	ldr	p3, [x2, #3, MUL VL]
+	ldr	p4, [x2, #4, MUL VL]
+	ldr	p5, [x2, #5, MUL VL]
+	ldr	p6, [x2, #6, MUL VL]
+	ldr	p7, [x2, #7, MUL VL]
+	ldr	p8, [x2, #8, MUL VL]
+	ldr	p9, [x2, #9, MUL VL]
+	ldr	p10, [x2, #10, MUL VL]
+	ldr	p11, [x2, #11, MUL VL]
+	ldr	p12, [x2, #12, MUL VL]
+	ldr	p13, [x2, #13, MUL VL]
+	ldr	p14, [x2, #14, MUL VL]
+	ldr	p15, [x2, #15, MUL VL]
+2:
+
+	// Do the syscall
+	svc	#0
+
+	// Save GPRs x8-x30
+	ldr	x2, =gpr_out
+	add	x2, x2, #64
+	stp	x8, x9, [x2], #16
+	stp	x10, x11, [x2], #16
+	stp	x12, x13, [x2], #16
+	stp	x14, x15, [x2], #16
+	stp	x16, x17, [x2], #16
+	stp	x18, x19, [x2], #16
+	stp	x20, x21, [x2], #16
+	stp	x22, x23, [x2], #16
+	stp	x24, x25, [x2], #16
+	stp	x26, x27, [x2], #16
+	stp	x28, x29, [x2], #16
+	str	x30, [x2]
+
+	// Restore x0 and x1 for feature checks
+	ldp	x0, x1, [sp, #16]
+
+	// Save FPSIMD state
+	ldr	x2, =fpr_out
+	stp	q0, q1, [x2]
+	stp	q2, q3, [x2, #16 * 2]
+	stp	q4, q5, [x2, #16 * 4]
+	stp	q6, q7, [x2, #16 * 6]
+	stp	q8, q9, [x2, #16 * 8]
+	stp	q10, q11, [x2, #16 * 10]
+	stp	q12, q13, [x2, #16 * 12]
+	stp	q14, q15, [x2, #16 * 14]
+	stp	q16, q17, [x2, #16 * 16]
+	stp	q18, q19, [x2, #16 * 18]
+	stp	q20, q21, [x2, #16 * 20]
+	stp	q22, q23, [x2, #16 * 22]
+	stp	q24, q25, [x2, #16 * 24]
+	stp	q26, q27, [x2, #16 * 26]
+	stp	q28, q29, [x2, #16 * 28]
+	stp	q30, q31, [x2, #16 * 30]
+
+	// Save SVCR if we're doing SME
+	cbz	x1, 1f
+	mrs	x2, S3_3_C4_C2_2
+	adrp	x3, svcr_out
+	str	x2, [x3, :lo12:svcr_out]
+1:
+
+	// Save ZA if it's enabled - uses x12 as scratch due to SME STR
+	tbz	x2, #SVCR_ZA_SHIFT, 1f
+	mov	w12, #0
+	ldr	x2, =za_out
+2:	_str_za 12, 2
+	add	x2, x2, x1
+	add	x12, x12, #1
+	cmp	x1, x12
+	bne	2b
+
+	// ZT0
+	mrs	x2, S3_0_C0_C4_5	// ID_AA64SMFR0_EL1
+	ubfx	x2, x2, #ID_AA64SMFR0_EL1_SMEver_SHIFT, \
+			#ID_AA64SMFR0_EL1_SMEver_WIDTH
+	cbz	x2, 1f
+	adrp	x2, zt_out
+	add	x2, x2, :lo12:zt_out
+	_str_zt 2
+1:
+
+	// Save the SVE state if we have some
+	cbz	x0, 1f
+
+	ldr	x2, =z_out
+	str	z0, [x2, #0, MUL VL]
+	str	z1, [x2, #1, MUL VL]
+	str	z2, [x2, #2, MUL VL]
+	str	z3, [x2, #3, MUL VL]
+	str	z4, [x2, #4, MUL VL]
+	str	z5, [x2, #5, MUL VL]
+	str	z6, [x2, #6, MUL VL]
+	str	z7, [x2, #7, MUL VL]
+	str	z8, [x2, #8, MUL VL]
+	str	z9, [x2, #9, MUL VL]
+	str	z10, [x2, #10, MUL VL]
+	str	z11, [x2, #11, MUL VL]
+	str	z12, [x2, #12, MUL VL]
+	str	z13, [x2, #13, MUL VL]
+	str	z14, [x2, #14, MUL VL]
+	str	z15, [x2, #15, MUL VL]
+	str	z16, [x2, #16, MUL VL]
+	str	z17, [x2, #17, MUL VL]
+	str	z18, [x2, #18, MUL VL]
+	str	z19, [x2, #19, MUL VL]
+	str	z20, [x2, #20, MUL VL]
+	str	z21, [x2, #21, MUL VL]
+	str	z22, [x2, #22, MUL VL]
+	str	z23, [x2, #23, MUL VL]
+	str	z24, [x2, #24, MUL VL]
+	str	z25, [x2, #25, MUL VL]
+	str	z26, [x2, #26, MUL VL]
+	str	z27, [x2, #27, MUL VL]
+	str	z28, [x2, #28, MUL VL]
+	str	z29, [x2, #29, MUL VL]
+	str	z30, [x2, #30, MUL VL]
+	str	z31, [x2, #31, MUL VL]
+
+	ldr	x2, =p_out
+	str	p0, [x2, #0, MUL VL]
+	str	p1, [x2, #1, MUL VL]
+	str	p2, [x2, #2, MUL VL]
+	str	p3, [x2, #3, MUL VL]
+	str	p4, [x2, #4, MUL VL]
+	str	p5, [x2, #5, MUL VL]
+	str	p6, [x2, #6, MUL VL]
+	str	p7, [x2, #7, MUL VL]
+	str	p8, [x2, #8, MUL VL]
+	str	p9, [x2, #9, MUL VL]
+	str	p10, [x2, #10, MUL VL]
+	str	p11, [x2, #11, MUL VL]
+	str	p12, [x2, #12, MUL VL]
+	str	p13, [x2, #13, MUL VL]
+	str	p14, [x2, #14, MUL VL]
+	str	p15, [x2, #15, MUL VL]
+
+	// Only save FFR if we wrote a value for SME
+	ldr	x2, =ffr_in
+	ldr	x2, [x2, #0]
+	cbz	x2, 1f
+	ldr	x2, =ffr_out
+	rdffr	p0.b
+	str	p0, [x2]
+1:
+
+	// Restore callee saved registers x19-x30
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+
+	// Clear SVCR if we were doing SME so future tests don't have ZA
+	cbz	x1, 1f
+	msr	S3_3_C4_C2_2, xzr
+1:
+
+	ret