Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 649 insertions, 0 deletions

diff --git a/tools/testing/selftests/arm64/fp/fp-stress.c b/tools/testing/selftests/arm64/fp/fp-stress.c
new file mode 100644
index 000000000..dd31647b0
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/fp-stress.c
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 ARM Limited.
+ */
+
+#define _GNU_SOURCE
+#define _POSIX_C_SOURCE 199309L
+
+#include <errno.h>
+#include <getopt.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/auxv.h>
+#include <sys/epoll.h>
+#include <sys/prctl.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+#include <sys/wait.h>
+#include <asm/hwcap.h>
+
+#include "../../kselftest.h"
+
+#define MAX_VLS 16
+
+struct child_data {
+	char *name, *output;
+	pid_t pid;
+	int stdout;
+	bool output_seen;
+	bool exited;
+	int exit_status;
+};
+
+static int epoll_fd;
+static struct child_data *children;
+static struct epoll_event *evs;
+static int tests;
+static int num_children;
+static bool terminate;
+
+static int startup_pipe[2];
+
+static int num_processors(void)
+{
+	long nproc = sysconf(_SC_NPROCESSORS_CONF);
+	if (nproc < 0) {
+		perror("Unable to read number of processors\n");
+		exit(EXIT_FAILURE);
+	}
+
+	return nproc;
+}
+
+static void child_start(struct child_data *child, const char *program)
+{
+	int ret, pipefd[2], i;
+	struct epoll_event ev;
+
+	ret = pipe(pipefd);
+	if (ret != 0)
+		ksft_exit_fail_msg("Failed to create stdout pipe: %s (%d)\n",
+				   strerror(errno), errno);
+
+	child->pid = fork();
+	if (child->pid == -1)
+		ksft_exit_fail_msg("fork() failed: %s (%d)\n",
+				   strerror(errno), errno);
+
+	if (!child->pid) {
+		/*
+		 * In child, replace stdout with the pipe, errors to
+		 * stderr from here as kselftest prints to stdout.
+		 */
+		ret = dup2(pipefd[1], 1);
+		if (ret == -1) {
+			fprintf(stderr, "dup2() %d\n", errno);
+			exit(EXIT_FAILURE);
+		}
+
+		/*
+		 * Duplicate the read side of the startup pipe to
+		 * FD 3 so we can close everything else.
+		 */
+		ret = dup2(startup_pipe[0], 3);
+		if (ret == -1) {
+			fprintf(stderr, "dup2() %d\n", errno);
+			exit(EXIT_FAILURE);
+		}
+
+		/*
+		 * Very dumb mechanism to clean open FDs other than
+		 * stdio. We don't want O_CLOEXEC for the pipes...
+		 */
+		for (i = 4; i < 8192; i++)
+			close(i);
+
+		/*
+		 * Read from the startup pipe, there should be no data
+		 * and we should block until it is closed.  We just
+		 * carry on on error since this isn't super critical.
+		 */
+		ret = read(3, &i, sizeof(i));
+		if (ret < 0)
+			fprintf(stderr, "read(startp pipe) failed: %s (%d)\n",
+				strerror(errno), errno);
+		if (ret > 0)
+			fprintf(stderr, "%d bytes of data on startup pipe\n",
+				ret);
+		close(3);
+
+		ret = execl(program, program, NULL);
+		fprintf(stderr, "execl(%s) failed: %d (%s)\n",
+			program, errno, strerror(errno));
+
+		exit(EXIT_FAILURE);
+	} else {
+		/*
+		 * In parent, remember the child and close our copy of the
+		 * write side of stdout.
+		 */
+		close(pipefd[1]);
+		child->stdout = pipefd[0];
+		child->output = NULL;
+		child->exited = false;
+		child->output_seen = false;
+
+		ev.events = EPOLLIN | EPOLLHUP;
+		ev.data.ptr = child;
+
+		ret = epoll_ctl(epoll_fd, EPOLL_CTL_ADD, child->stdout, &ev);
+		if (ret < 0) {
+			ksft_exit_fail_msg("%s EPOLL_CTL_ADD failed: %s (%d)\n",
+					   child->name, strerror(errno), errno);
+		}
+	}
+}
+
+static bool child_output_read(struct child_data *child)
+{
+	char read_data[1024];
+	char work[1024];
+	int ret, len, cur_work, cur_read;
+
+	ret = read(child->stdout, read_data, sizeof(read_data));
+	if (ret < 0) {
+		if (errno == EINTR)
+			return true;
+
+		ksft_print_msg("%s: read() failed: %s (%d)\n",
+			       child->name, strerror(errno),
+			       errno);
+		return false;
+	}
+	len = ret;
+
+	child->output_seen = true;
+
+	/* Pick up any partial read */
+	if (child->output) {
+		strncpy(work, child->output, sizeof(work) - 1);
+		cur_work = strnlen(work, sizeof(work));
+		free(child->output);
+		child->output = NULL;
+	} else {
+		cur_work = 0;
+	}
+
+	cur_read = 0;
+	while (cur_read < len) {
+		work[cur_work] = read_data[cur_read++];
+
+		if (work[cur_work] == '\n') {
+			work[cur_work] = '\0';
+			ksft_print_msg("%s: %s\n", child->name, work);
+			cur_work = 0;
+		} else {
+			cur_work++;
+		}
+	}
+
+	if (cur_work) {
+		work[cur_work] = '\0';
+		ret = asprintf(&child->output, "%s", work);
+		if (ret == -1)
+			ksft_exit_fail_msg("Out of memory\n");
+	}
+
+	return false;
+}
+
+static void child_output(struct child_data *child, uint32_t events,
+			 bool flush)
+{
+	bool read_more;
+
+	if (events & EPOLLIN) {
+		do {
+			read_more = child_output_read(child);
+		} while (read_more);
+	}
+
+	if (events & EPOLLHUP) {
+		close(child->stdout);
+		child->stdout = -1;
+		flush = true;
+	}
+
+	if (flush && child->output) {
+		ksft_print_msg("%s: %s<EOF>\n", child->name, child->output);
+		free(child->output);
+		child->output = NULL;
+	}
+}
+
+static void child_tickle(struct child_data *child)
+{
+	if (child->output_seen && !child->exited)
+		kill(child->pid, SIGUSR2);
+}
+
+static void child_stop(struct child_data *child)
+{
+	if (!child->exited)
+		kill(child->pid, SIGTERM);
+}
+
+static void child_cleanup(struct child_data *child)
+{
+	pid_t ret;
+	int status;
+	bool fail = false;
+
+	if (!child->exited) {
+		do {
+			ret = waitpid(child->pid, &status, 0);
+			if (ret == -1 && errno == EINTR)
+				continue;
+
+			if (ret == -1) {
+				ksft_print_msg("waitpid(%d) failed: %s (%d)\n",
+					       child->pid, strerror(errno),
+					       errno);
+				fail = true;
+				break;
+			}
+		} while (!WIFEXITED(status));
+		child->exit_status = WEXITSTATUS(status);
+	}
+
+	if (!child->output_seen) {
+		ksft_print_msg("%s no output seen\n", child->name);
+		fail = true;
+	}
+
+	if (child->exit_status != 0) {
+		ksft_print_msg("%s exited with error code %d\n",
+			       child->name, child->exit_status);
+		fail = true;
+	}
+
+	ksft_test_result(!fail, "%s\n", child->name);
+}
+
+static void handle_child_signal(int sig, siginfo_t *info, void *context)
+{
+	int i;
+	bool found = false;
+
+	for (i = 0; i < num_children; i++) {
+		if (children[i].pid == info->si_pid) {
+			children[i].exited = true;
+			children[i].exit_status = info->si_status;
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		ksft_print_msg("SIGCHLD for unknown PID %d with status %d\n",
+			       info->si_pid, info->si_status);
+}
+
+static void handle_exit_signal(int sig, siginfo_t *info, void *context)
+{
+	int i;
+
+	/* If we're already exiting then don't signal again */
+	if (terminate)
+		return;
+
+	ksft_print_msg("Got signal, exiting...\n");
+
+	terminate = true;
+
+	/*
+	 * This should be redundant, the main loop should clean up
+	 * after us, but for safety stop everything we can here.
+	 */
+	for (i = 0; i < num_children; i++)
+		child_stop(&children[i]);
+}
+
+static void start_fpsimd(struct child_data *child, int cpu, int copy)
+{
+	int ret;
+
+	ret = asprintf(&child->name, "FPSIMD-%d-%d", cpu, copy);
+	if (ret == -1)
+		ksft_exit_fail_msg("asprintf() failed\n");
+
+	child_start(child, "./fpsimd-test");
+
+	ksft_print_msg("Started %s\n", child->name);
+}
+
+static void start_sve(struct child_data *child, int vl, int cpu)
+{
+	int ret;
+
+	ret = prctl(PR_SVE_SET_VL, vl | PR_SVE_VL_INHERIT);
+	if (ret < 0)
+		ksft_exit_fail_msg("Failed to set SVE VL %d\n", vl);
+
+	ret = asprintf(&child->name, "SVE-VL-%d-%d", vl, cpu);
+	if (ret == -1)
+		ksft_exit_fail_msg("asprintf() failed\n");
+
+	child_start(child, "./sve-test");
+
+	ksft_print_msg("Started %s\n", child->name);
+}
+
+static void start_ssve(struct child_data *child, int vl, int cpu)
+{
+	int ret;
+
+	ret = asprintf(&child->name, "SSVE-VL-%d-%d", vl, cpu);
+	if (ret == -1)
+		ksft_exit_fail_msg("asprintf() failed\n");
+
+	ret = prctl(PR_SME_SET_VL, vl | PR_SME_VL_INHERIT);
+	if (ret < 0)
+		ksft_exit_fail_msg("Failed to set SME VL %d\n", ret);
+
+	child_start(child, "./ssve-test");
+
+	ksft_print_msg("Started %s\n", child->name);
+}
+
+static void start_za(struct child_data *child, int vl, int cpu)
+{
+	int ret;
+
+	ret = prctl(PR_SME_SET_VL, vl | PR_SVE_VL_INHERIT);
+	if (ret < 0)
+		ksft_exit_fail_msg("Failed to set SME VL %d\n", ret);
+
+	ret = asprintf(&child->name, "ZA-VL-%d-%d", vl, cpu);
+	if (ret == -1)
+		ksft_exit_fail_msg("asprintf() failed\n");
+
+	child_start(child, "./za-test");
+
+	ksft_print_msg("Started %s\n", child->name);
+}
+
+static void start_zt(struct child_data *child, int cpu)
+{
+	int ret;
+
+	ret = asprintf(&child->name, "ZT-%d", cpu);
+	if (ret == -1)
+		ksft_exit_fail_msg("asprintf() failed\n");
+
+	child_start(child, "./zt-test");
+
+	ksft_print_msg("Started %s\n", child->name);
+}
+
+static void probe_vls(int vls[], int *vl_count, int set_vl)
+{
+	unsigned int vq;
+	int vl;
+
+	*vl_count = 0;
+
+	for (vq = SVE_VQ_MAX; vq > 0; vq /= 2) {
+		vl = prctl(set_vl, vq * 16);
+		if (vl == -1)
+			ksft_exit_fail_msg("SET_VL failed: %s (%d)\n",
+					   strerror(errno), errno);
+
+		vl &= PR_SVE_VL_LEN_MASK;
+
+		if (*vl_count && (vl == vls[*vl_count - 1]))
+			break;
+
+		vq = sve_vq_from_vl(vl);
+
+		vls[*vl_count] = vl;
+		*vl_count += 1;
+	}
+}
+
+/* Handle any pending output without blocking */
+static void drain_output(bool flush)
+{
+	int ret = 1;
+	int i;
+
+	while (ret > 0) {
+		ret = epoll_wait(epoll_fd, evs, tests, 0);
+		if (ret < 0) {
+			if (errno == EINTR)
+				continue;
+			ksft_print_msg("epoll_wait() failed: %s (%d)\n",
+				       strerror(errno), errno);
+		}
+
+		for (i = 0; i < ret; i++)
+			child_output(evs[i].data.ptr, evs[i].events, flush);
+	}
+}
+
+static const struct option options[] = {
+	{ "timeout",	required_argument, NULL, 't' },
+	{ }
+};
+
+int main(int argc, char **argv)
+{
+	int ret;
+	int timeout = 10;
+	int cpus, i, j, c;
+	int sve_vl_count, sme_vl_count, fpsimd_per_cpu;
+	bool all_children_started = false;
+	int seen_children;
+	int sve_vls[MAX_VLS], sme_vls[MAX_VLS];
+	bool have_sme2;
+	struct sigaction sa;
+
+	while ((c = getopt_long(argc, argv, "t:", options, NULL)) != -1) {
+		switch (c) {
+		case 't':
+			ret = sscanf(optarg, "%d", &timeout);
+			if (ret != 1)
+				ksft_exit_fail_msg("Failed to parse timeout %s\n",
+						   optarg);
+			break;
+		default:
+			ksft_exit_fail_msg("Unknown argument\n");
+		}
+	}
+
+	cpus = num_processors();
+	tests = 0;
+
+	if (getauxval(AT_HWCAP) & HWCAP_SVE) {
+		probe_vls(sve_vls, &sve_vl_count, PR_SVE_SET_VL);
+		tests += sve_vl_count * cpus;
+	} else {
+		sve_vl_count = 0;
+	}
+
+	if (getauxval(AT_HWCAP2) & HWCAP2_SME) {
+		probe_vls(sme_vls, &sme_vl_count, PR_SME_SET_VL);
+		tests += sme_vl_count * cpus * 2;
+	} else {
+		sme_vl_count = 0;
+	}
+
+	if (getauxval(AT_HWCAP2) & HWCAP2_SME2) {
+		tests += cpus;
+		have_sme2 = true;
+	} else {
+		have_sme2 = false;
+	}
+
+	/* Force context switching if we only have FPSIMD */
+	if (!sve_vl_count && !sme_vl_count)
+		fpsimd_per_cpu = 2;
+	else
+		fpsimd_per_cpu = 1;
+	tests += cpus * fpsimd_per_cpu;
+
+	ksft_print_header();
+	ksft_set_plan(tests);
+
+	ksft_print_msg("%d CPUs, %d SVE VLs, %d SME VLs, SME2 %s\n",
+		       cpus, sve_vl_count, sme_vl_count,
+		       have_sme2 ? "present" : "absent");
+
+	if (timeout > 0)
+		ksft_print_msg("Will run for %ds\n", timeout);
+	else
+		ksft_print_msg("Will run until terminated\n");
+
+	children = calloc(sizeof(*children), tests);
+	if (!children)
+		ksft_exit_fail_msg("Unable to allocate child data\n");
+
+	ret = epoll_create1(EPOLL_CLOEXEC);
+	if (ret < 0)
+		ksft_exit_fail_msg("epoll_create1() failed: %s (%d)\n",
+				   strerror(errno), ret);
+	epoll_fd = ret;
+
+	/* Create a pipe which children will block on before execing */
+	ret = pipe(startup_pipe);
+	if (ret != 0)
+		ksft_exit_fail_msg("Failed to create startup pipe: %s (%d)\n",
+				   strerror(errno), errno);
+
+	/* Get signal handers ready before we start any children */
+	memset(&sa, 0, sizeof(sa));
+	sa.sa_sigaction = handle_exit_signal;
+	sa.sa_flags = SA_RESTART | SA_SIGINFO;
+	sigemptyset(&sa.sa_mask);
+	ret = sigaction(SIGINT, &sa, NULL);
+	if (ret < 0)
+		ksft_print_msg("Failed to install SIGINT handler: %s (%d)\n",
+			       strerror(errno), errno);
+	ret = sigaction(SIGTERM, &sa, NULL);
+	if (ret < 0)
+		ksft_print_msg("Failed to install SIGTERM handler: %s (%d)\n",
+			       strerror(errno), errno);
+	sa.sa_sigaction = handle_child_signal;
+	ret = sigaction(SIGCHLD, &sa, NULL);
+	if (ret < 0)
+		ksft_print_msg("Failed to install SIGCHLD handler: %s (%d)\n",
+			       strerror(errno), errno);
+
+	evs = calloc(tests, sizeof(*evs));
+	if (!evs)
+		ksft_exit_fail_msg("Failed to allocated %d epoll events\n",
+				   tests);
+
+	for (i = 0; i < cpus; i++) {
+		for (j = 0; j < fpsimd_per_cpu; j++)
+			start_fpsimd(&children[num_children++], i, j);
+
+		for (j = 0; j < sve_vl_count; j++)
+			start_sve(&children[num_children++], sve_vls[j], i);
+
+		for (j = 0; j < sme_vl_count; j++) {
+			start_ssve(&children[num_children++], sme_vls[j], i);
+			start_za(&children[num_children++], sme_vls[j], i);
+		}
+
+		if (have_sme2)
+			start_zt(&children[num_children++], i);
+	}
+
+	/*
+	 * All children started, close the startup pipe and let them
+	 * run.
+	 */
+	close(startup_pipe[0]);
+	close(startup_pipe[1]);
+
+	for (;;) {
+		/* Did we get a signal asking us to exit? */
+		if (terminate)
+			break;
+
+		/*
+		 * Timeout is counted in seconds with no output, the
+		 * tests print during startup then are silent when
+		 * running so this should ensure they all ran enough
+		 * to install the signal handler, this is especially
+		 * useful in emulation where we will both be slow and
+		 * likely to have a large set of VLs.
+		 */
+		ret = epoll_wait(epoll_fd, evs, tests, 1000);
+		if (ret < 0) {
+			if (errno == EINTR)
+				continue;
+			ksft_exit_fail_msg("epoll_wait() failed: %s (%d)\n",
+					   strerror(errno), errno);
+		}
+
+		/* Output? */
+		if (ret > 0) {
+			for (i = 0; i < ret; i++) {
+				child_output(evs[i].data.ptr, evs[i].events,
+					     false);
+			}
+			continue;
+		}
+
+		/* Otherwise epoll_wait() timed out */
+
+		/*
+		 * If the child processes have not produced output they
+		 * aren't actually running the tests yet .
+		 */
+		if (!all_children_started) {
+			seen_children = 0;
+
+			for (i = 0; i < num_children; i++)
+				if (children[i].output_seen ||
+				    children[i].exited)
+					seen_children++;
+
+			if (seen_children != num_children) {
+				ksft_print_msg("Waiting for %d children\n",
+					       num_children - seen_children);
+				continue;
+			}
+
+			all_children_started = true;
+		}
+
+		ksft_print_msg("Sending signals, timeout remaining: %d\n",
+			       timeout);
+
+		for (i = 0; i < num_children; i++)
+			child_tickle(&children[i]);
+
+		/* Negative timeout means run indefinitely */
+		if (timeout < 0)
+			continue;
+		if (--timeout == 0)
+			break;
+	}
+
+	ksft_print_msg("Finishing up...\n");
+	terminate = true;
+
+	for (i = 0; i < tests; i++)
+		child_stop(&children[i]);
+
+	drain_output(false);
+
+	for (i = 0; i < tests; i++)
+		child_cleanup(&children[i]);
+
+	drain_output(true);
+
+	ksft_print_cnts();
+
+	return 0;
+}