Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 913 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/prog_tests/tailcalls.c b/tools/testing/selftests/bpf/prog_tests/tailcalls.c
new file mode 100644
index 000000000..58fe2c586
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/tailcalls.c
@@ -0,0 +1,913 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <network_helpers.h>
+
+/* test_tailcall_1 checks basic functionality by patching multiple locations
+ * in a single program for a single tail call slot with nop->jmp, jmp->nop
+ * and jmp->jmp rewrites. Also checks for nop->nop.
+ */
+static void test_tailcall_1(void)
+{
+	int err, map_fd, prog_fd, main_fd, i, j;
+	struct bpf_map *prog_array;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char prog_name[32];
+	char buff[128] = {};
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall1.bpf.o", BPF_PROG_TYPE_SCHED_CLS, &obj,
+				 &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, i, "tailcall retval");
+
+		err = bpf_map_delete_elem(map_fd, &i);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 3, "tailcall retval");
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_OK(topts.retval, "tailcall retval");
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		j = bpf_map__max_entries(prog_array) - 1 - i;
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", j);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		j = bpf_map__max_entries(prog_array) - 1 - i;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, j, "tailcall retval");
+
+		err = bpf_map_delete_elem(map_fd, &i);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 3, "tailcall retval");
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_map_delete_elem(map_fd, &i);
+		if (CHECK_FAIL(err >= 0 || errno != ENOENT))
+			goto out;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, 3, "tailcall retval");
+	}
+
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_2 checks that patching multiple programs for a single
+ * tail call slot works. It also jumps through several programs and tests
+ * the tail call limit counter.
+ */
+static void test_tailcall_2(void)
+{
+	int err, map_fd, prog_fd, main_fd, i;
+	struct bpf_map *prog_array;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char prog_name[32];
+	char buff[128] = {};
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall2.bpf.o", BPF_PROG_TYPE_SCHED_CLS, &obj,
+				 &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 2, "tailcall retval");
+
+	i = 2;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 1, "tailcall retval");
+
+	i = 0;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 3, "tailcall retval");
+out:
+	bpf_object__close(obj);
+}
+
+static void test_tailcall_count(const char *which)
+{
+	int err, map_fd, prog_fd, main_fd, data_fd, i, val;
+	struct bpf_map *prog_array, *data_map;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char buff[128] = {};
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load(which, BPF_PROG_TYPE_SCHED_CLS, &obj,
+			    &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	prog = bpf_object__find_program_by_name(obj, "classifier_0");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	prog_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(prog_fd < 0))
+		goto out;
+
+	i = 0;
+	err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 1, "tailcall retval");
+
+	data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
+	if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
+		return;
+
+	data_fd = bpf_map__fd(data_map);
+	if (CHECK_FAIL(map_fd < 0))
+		return;
+
+	i = 0;
+	err = bpf_map_lookup_elem(data_fd, &i, &val);
+	ASSERT_OK(err, "tailcall count");
+	ASSERT_EQ(val, 33, "tailcall count");
+
+	i = 0;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_OK(topts.retval, "tailcall retval");
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_3 checks that the count value of the tail call limit
+ * enforcement matches with expectations. JIT uses direct jump.
+ */
+static void test_tailcall_3(void)
+{
+	test_tailcall_count("tailcall3.bpf.o");
+}
+
+/* test_tailcall_6 checks that the count value of the tail call limit
+ * enforcement matches with expectations. JIT uses indirect jump.
+ */
+static void test_tailcall_6(void)
+{
+	test_tailcall_count("tailcall6.bpf.o");
+}
+
+/* test_tailcall_4 checks that the kernel properly selects indirect jump
+ * for the case where the key is not known. Latter is passed via global
+ * data to select different targets we can compare return value of.
+ */
+static void test_tailcall_4(void)
+{
+	int err, map_fd, prog_fd, main_fd, data_fd, i;
+	struct bpf_map *prog_array, *data_map;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	static const int zero = 0;
+	char buff[128] = {};
+	char prog_name[32];
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall4.bpf.o", BPF_PROG_TYPE_SCHED_CLS, &obj,
+				 &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
+	if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
+		return;
+
+	data_fd = bpf_map__fd(data_map);
+	if (CHECK_FAIL(map_fd < 0))
+		return;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_map_update_elem(data_fd, &zero, &i, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, i, "tailcall retval");
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_map_update_elem(data_fd, &zero, &i, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_map_delete_elem(map_fd, &i);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, 3, "tailcall retval");
+	}
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_5 probes similarly to test_tailcall_4 that the kernel generates
+ * an indirect jump when the keys are const but different from different branches.
+ */
+static void test_tailcall_5(void)
+{
+	int err, map_fd, prog_fd, main_fd, data_fd, i, key[] = { 1111, 1234, 5678 };
+	struct bpf_map *prog_array, *data_map;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	static const int zero = 0;
+	char buff[128] = {};
+	char prog_name[32];
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall5.bpf.o", BPF_PROG_TYPE_SCHED_CLS, &obj,
+				 &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
+	if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
+		return;
+
+	data_fd = bpf_map__fd(data_map);
+	if (CHECK_FAIL(map_fd < 0))
+		return;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_map_update_elem(data_fd, &zero, &key[i], BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, i, "tailcall retval");
+	}
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		err = bpf_map_update_elem(data_fd, &zero, &key[i], BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_map_delete_elem(map_fd, &i);
+		if (CHECK_FAIL(err))
+			goto out;
+
+		err = bpf_prog_test_run_opts(main_fd, &topts);
+		ASSERT_OK(err, "tailcall");
+		ASSERT_EQ(topts.retval, 3, "tailcall retval");
+	}
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_bpf2bpf_1 purpose is to make sure that tailcalls are working
+ * correctly in correlation with BPF subprograms
+ */
+static void test_tailcall_bpf2bpf_1(void)
+{
+	int err, map_fd, prog_fd, main_fd, i;
+	struct bpf_map *prog_array;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char prog_name[32];
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = &pkt_v4,
+		.data_size_in = sizeof(pkt_v4),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall_bpf2bpf1.bpf.o", BPF_PROG_TYPE_SCHED_CLS,
+				 &obj, &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	/* nop -> jmp */
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 1, "tailcall retval");
+
+	/* jmp -> nop, call subprog that will do tailcall */
+	i = 1;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_OK(topts.retval, "tailcall retval");
+
+	/* make sure that subprog can access ctx and entry prog that
+	 * called this subprog can properly return
+	 */
+	i = 0;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, sizeof(pkt_v4) * 2, "tailcall retval");
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_bpf2bpf_2 checks that the count value of the tail call limit
+ * enforcement matches with expectations when tailcall is preceded with
+ * bpf2bpf call.
+ */
+static void test_tailcall_bpf2bpf_2(void)
+{
+	int err, map_fd, prog_fd, main_fd, data_fd, i, val;
+	struct bpf_map *prog_array, *data_map;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char buff[128] = {};
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = buff,
+		.data_size_in = sizeof(buff),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall_bpf2bpf2.bpf.o", BPF_PROG_TYPE_SCHED_CLS,
+				 &obj, &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	prog = bpf_object__find_program_by_name(obj, "classifier_0");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	prog_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(prog_fd < 0))
+		goto out;
+
+	i = 0;
+	err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, 1, "tailcall retval");
+
+	data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
+	if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
+		return;
+
+	data_fd = bpf_map__fd(data_map);
+	if (CHECK_FAIL(map_fd < 0))
+		return;
+
+	i = 0;
+	err = bpf_map_lookup_elem(data_fd, &i, &val);
+	ASSERT_OK(err, "tailcall count");
+	ASSERT_EQ(val, 33, "tailcall count");
+
+	i = 0;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_OK(topts.retval, "tailcall retval");
+out:
+	bpf_object__close(obj);
+}
+
+/* test_tailcall_bpf2bpf_3 checks that non-trivial amount of stack (up to
+ * 256 bytes) can be used within bpf subprograms that have the tailcalls
+ * in them
+ */
+static void test_tailcall_bpf2bpf_3(void)
+{
+	int err, map_fd, prog_fd, main_fd, i;
+	struct bpf_map *prog_array;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char prog_name[32];
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = &pkt_v4,
+		.data_size_in = sizeof(pkt_v4),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall_bpf2bpf3.bpf.o", BPF_PROG_TYPE_SCHED_CLS,
+				 &obj, &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, sizeof(pkt_v4) * 3, "tailcall retval");
+
+	i = 1;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, sizeof(pkt_v4), "tailcall retval");
+
+	i = 0;
+	err = bpf_map_delete_elem(map_fd, &i);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, sizeof(pkt_v4) * 2, "tailcall retval");
+out:
+	bpf_object__close(obj);
+}
+
+#include "tailcall_bpf2bpf4.skel.h"
+
+/* test_tailcall_bpf2bpf_4 checks that tailcall counter is correctly preserved
+ * across tailcalls combined with bpf2bpf calls. for making sure that tailcall
+ * counter behaves correctly, bpf program will go through following flow:
+ *
+ * entry -> entry_subprog -> tailcall0 -> bpf_func0 -> subprog0 ->
+ * -> tailcall1 -> bpf_func1 -> subprog1 -> tailcall2 -> bpf_func2 ->
+ * subprog2 [here bump global counter] --------^
+ *
+ * We go through first two tailcalls and start counting from the subprog2 where
+ * the loop begins. At the end of the test make sure that the global counter is
+ * equal to 31, because tailcall counter includes the first two tailcalls
+ * whereas global counter is incremented only on loop presented on flow above.
+ *
+ * The noise parameter is used to insert bpf_map_update calls into the logic
+ * to force verifier to patch instructions. This allows us to ensure jump
+ * logic remains correct with instruction movement.
+ */
+static void test_tailcall_bpf2bpf_4(bool noise)
+{
+	int err, map_fd, prog_fd, main_fd, data_fd, i;
+	struct tailcall_bpf2bpf4__bss val;
+	struct bpf_map *prog_array, *data_map;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char prog_name[32];
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = &pkt_v4,
+		.data_size_in = sizeof(pkt_v4),
+		.repeat = 1,
+	);
+
+	err = bpf_prog_test_load("tailcall_bpf2bpf4.bpf.o", BPF_PROG_TYPE_SCHED_CLS,
+				 &obj, &prog_fd);
+	if (CHECK_FAIL(err))
+		return;
+
+	prog = bpf_object__find_program_by_name(obj, "entry");
+	if (CHECK_FAIL(!prog))
+		goto out;
+
+	main_fd = bpf_program__fd(prog);
+	if (CHECK_FAIL(main_fd < 0))
+		goto out;
+
+	prog_array = bpf_object__find_map_by_name(obj, "jmp_table");
+	if (CHECK_FAIL(!prog_array))
+		goto out;
+
+	map_fd = bpf_map__fd(prog_array);
+	if (CHECK_FAIL(map_fd < 0))
+		goto out;
+
+	for (i = 0; i < bpf_map__max_entries(prog_array); i++) {
+		snprintf(prog_name, sizeof(prog_name), "classifier_%d", i);
+
+		prog = bpf_object__find_program_by_name(obj, prog_name);
+		if (CHECK_FAIL(!prog))
+			goto out;
+
+		prog_fd = bpf_program__fd(prog);
+		if (CHECK_FAIL(prog_fd < 0))
+			goto out;
+
+		err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+		if (CHECK_FAIL(err))
+			goto out;
+	}
+
+	data_map = bpf_object__find_map_by_name(obj, "tailcall.bss");
+	if (CHECK_FAIL(!data_map || !bpf_map__is_internal(data_map)))
+		return;
+
+	data_fd = bpf_map__fd(data_map);
+	if (CHECK_FAIL(map_fd < 0))
+		return;
+
+	i = 0;
+	val.noise = noise;
+	val.count = 0;
+	err = bpf_map_update_elem(data_fd, &i, &val, BPF_ANY);
+	if (CHECK_FAIL(err))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "tailcall");
+	ASSERT_EQ(topts.retval, sizeof(pkt_v4) * 3, "tailcall retval");
+
+	i = 0;
+	err = bpf_map_lookup_elem(data_fd, &i, &val);
+	ASSERT_OK(err, "tailcall count");
+	ASSERT_EQ(val.count, 31, "tailcall count");
+
+out:
+	bpf_object__close(obj);
+}
+
+#include "tailcall_bpf2bpf6.skel.h"
+
+/* Tail call counting works even when there is data on stack which is
+ * not aligned to 8 bytes.
+ */
+static void test_tailcall_bpf2bpf_6(void)
+{
+	struct tailcall_bpf2bpf6 *obj;
+	int err, map_fd, prog_fd, main_fd, data_fd, i, val;
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = &pkt_v4,
+		.data_size_in = sizeof(pkt_v4),
+		.repeat = 1,
+	);
+
+	obj = tailcall_bpf2bpf6__open_and_load();
+	if (!ASSERT_OK_PTR(obj, "open and load"))
+		return;
+
+	main_fd = bpf_program__fd(obj->progs.entry);
+	if (!ASSERT_GE(main_fd, 0, "entry prog fd"))
+		goto out;
+
+	map_fd = bpf_map__fd(obj->maps.jmp_table);
+	if (!ASSERT_GE(map_fd, 0, "jmp_table map fd"))
+		goto out;
+
+	prog_fd = bpf_program__fd(obj->progs.classifier_0);
+	if (!ASSERT_GE(prog_fd, 0, "classifier_0 prog fd"))
+		goto out;
+
+	i = 0;
+	err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY);
+	if (!ASSERT_OK(err, "jmp_table map update"))
+		goto out;
+
+	err = bpf_prog_test_run_opts(main_fd, &topts);
+	ASSERT_OK(err, "entry prog test run");
+	ASSERT_EQ(topts.retval, 0, "tailcall retval");
+
+	data_fd = bpf_map__fd(obj->maps.bss);
+	if (!ASSERT_GE(map_fd, 0, "bss map fd"))
+		goto out;
+
+	i = 0;
+	err = bpf_map_lookup_elem(data_fd, &i, &val);
+	ASSERT_OK(err, "bss map lookup");
+	ASSERT_EQ(val, 1, "done flag is set");
+
+out:
+	tailcall_bpf2bpf6__destroy(obj);
+}
+
+void test_tailcalls(void)
+{
+	if (test__start_subtest("tailcall_1"))
+		test_tailcall_1();
+	if (test__start_subtest("tailcall_2"))
+		test_tailcall_2();
+	if (test__start_subtest("tailcall_3"))
+		test_tailcall_3();
+	if (test__start_subtest("tailcall_4"))
+		test_tailcall_4();
+	if (test__start_subtest("tailcall_5"))
+		test_tailcall_5();
+	if (test__start_subtest("tailcall_6"))
+		test_tailcall_6();
+	if (test__start_subtest("tailcall_bpf2bpf_1"))
+		test_tailcall_bpf2bpf_1();
+	if (test__start_subtest("tailcall_bpf2bpf_2"))
+		test_tailcall_bpf2bpf_2();
+	if (test__start_subtest("tailcall_bpf2bpf_3"))
+		test_tailcall_bpf2bpf_3();
+	if (test__start_subtest("tailcall_bpf2bpf_4"))
+		test_tailcall_bpf2bpf_4(false);
+	if (test__start_subtest("tailcall_bpf2bpf_5"))
+		test_tailcall_bpf2bpf_4(true);
+	if (test__start_subtest("tailcall_bpf2bpf_6"))
+		test_tailcall_bpf2bpf_6();
+}