Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 233 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh
new file mode 100755
index 000000000..fbcaa9f01
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Author: Jesper Dangaard Brouer <hawk@kernel.org>
+
+# Kselftest framework requirement - SKIP code is 4.
+readonly KSFT_SKIP=4
+readonly NS1="ns1-$(mktemp -u XXXXXX)"
+readonly NS2="ns2-$(mktemp -u XXXXXX)"
+
+# Allow wrapper scripts to name test
+if [ -z "$TESTNAME" ]; then
+    TESTNAME=xdp_vlan
+fi
+
+# Default XDP mode
+XDP_MODE=xdpgeneric
+
+usage() {
+  echo "Testing XDP + TC eBPF VLAN manipulations: $TESTNAME"
+  echo ""
+  echo "Usage: $0 [-vfh]"
+  echo "  -v | --verbose : Verbose"
+  echo "  --flush        : Flush before starting (e.g. after --interactive)"
+  echo "  --interactive  : Keep netns setup running after test-run"
+  echo "  --mode=XXX     : Choose XDP mode (xdp | xdpgeneric | xdpdrv)"
+  echo ""
+}
+
+valid_xdp_mode()
+{
+	local mode=$1
+
+	case "$mode" in
+		xdpgeneric | xdpdrv | xdp)
+			return 0
+			;;
+		*)
+			return 1
+	esac
+}
+
+cleanup()
+{
+	local status=$?
+
+	if [ "$status" = "0" ]; then
+		echo "selftests: $TESTNAME [PASS]";
+	else
+		echo "selftests: $TESTNAME [FAILED]";
+	fi
+
+	if [ -n "$INTERACTIVE" ]; then
+		echo "Namespace setup still active explore with:"
+		echo " ip netns exec ${NS1} bash"
+		echo " ip netns exec ${NS2} bash"
+		exit $status
+	fi
+
+	set +e
+	ip link del veth1 2> /dev/null
+	ip netns del ${NS1} 2> /dev/null
+	ip netns del ${NS2} 2> /dev/null
+}
+
+# Using external program "getopt" to get --long-options
+OPTIONS=$(getopt -o hvfi: \
+    --long verbose,flush,help,interactive,debug,mode: -- "$@")
+if (( $? != 0 )); then
+    usage
+    echo "selftests: $TESTNAME [FAILED] Error calling getopt, unknown option?"
+    exit 2
+fi
+eval set -- "$OPTIONS"
+
+##  --- Parse command line arguments / parameters ---
+while true; do
+	case "$1" in
+	    -v | --verbose)
+		export VERBOSE=yes
+		shift
+		;;
+	    -i | --interactive | --debug )
+		INTERACTIVE=yes
+		shift
+		;;
+	    -f | --flush )
+		cleanup
+		shift
+		;;
+	    --mode )
+		shift
+		XDP_MODE=$1
+		shift
+		;;
+	    -- )
+		shift
+		break
+		;;
+	    -h | --help )
+		usage;
+		echo "selftests: $TESTNAME [SKIP] usage help info requested"
+		exit $KSFT_SKIP
+		;;
+	    * )
+		shift
+		break
+		;;
+	esac
+done
+
+if [ "$EUID" -ne 0 ]; then
+	echo "selftests: $TESTNAME [FAILED] need root privileges"
+	exit 1
+fi
+
+valid_xdp_mode $XDP_MODE
+if [ $? -ne 0 ]; then
+	echo "selftests: $TESTNAME [FAILED] unknown XDP mode ($XDP_MODE)"
+	exit 1
+fi
+
+ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null
+if [ $? -ne 0 ]; then
+	echo "selftests: $TESTNAME [SKIP] need ip xdp support"
+	exit $KSFT_SKIP
+fi
+
+# Interactive mode likely require us to cleanup netns
+if [ -n "$INTERACTIVE" ]; then
+	ip link del veth1 2> /dev/null
+	ip netns del ${NS1} 2> /dev/null
+	ip netns del ${NS2} 2> /dev/null
+fi
+
+# Exit on failure
+set -e
+
+# Some shell-tools dependencies
+which ip > /dev/null
+which tc > /dev/null
+which ethtool > /dev/null
+
+# Make rest of shell verbose, showing comments as doc/info
+if [ -n "$VERBOSE" ]; then
+    set -v
+fi
+
+# Create two namespaces
+ip netns add ${NS1}
+ip netns add ${NS2}
+
+# Run cleanup if failing or on kill
+trap cleanup 0 2 3 6 9
+
+# Create veth pair
+ip link add veth1 type veth peer name veth2
+
+# Move veth1 and veth2 into the respective namespaces
+ip link set veth1 netns ${NS1}
+ip link set veth2 netns ${NS2}
+
+# NOTICE: XDP require VLAN header inside packet payload
+#  - Thus, disable VLAN offloading driver features
+#  - For veth REMEMBER TX side VLAN-offload
+#
+# Disable rx-vlan-offload (mostly needed on ns1)
+ip netns exec ${NS1} ethtool -K veth1 rxvlan off
+ip netns exec ${NS2} ethtool -K veth2 rxvlan off
+#
+# Disable tx-vlan-offload (mostly needed on ns2)
+ip netns exec ${NS2} ethtool -K veth2 txvlan off
+ip netns exec ${NS1} ethtool -K veth1 txvlan off
+
+export IPADDR1=100.64.41.1
+export IPADDR2=100.64.41.2
+
+# In ns1/veth1 add IP-addr on plain net_device
+ip netns exec ${NS1} ip addr add ${IPADDR1}/24 dev veth1
+ip netns exec ${NS1} ip link set veth1 up
+
+# In ns2/veth2 create VLAN device
+export VLAN=4011
+export DEVNS2=veth2
+ip netns exec ${NS2} ip link add link $DEVNS2 name $DEVNS2.$VLAN type vlan id $VLAN
+ip netns exec ${NS2} ip addr add ${IPADDR2}/24 dev $DEVNS2.$VLAN
+ip netns exec ${NS2} ip link set $DEVNS2 up
+ip netns exec ${NS2} ip link set $DEVNS2.$VLAN up
+
+# Bringup lo in netns (to avoids confusing people using --interactive)
+ip netns exec ${NS1} ip link set lo up
+ip netns exec ${NS2} ip link set lo up
+
+# At this point, the hosts cannot reach each-other,
+# because ns2 are using VLAN tags on the packets.
+
+ip netns exec ${NS2} sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Success: First ping must fail"'
+
+
+# Now we can use the test_xdp_vlan.c program to pop/push these VLAN tags
+# ----------------------------------------------------------------------
+# In ns1: ingress use XDP to remove VLAN tags
+export DEVNS1=veth1
+export BPF_FILE=test_xdp_vlan.bpf.o
+
+# First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change"
+export XDP_PROG=xdp_vlan_change
+ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG
+
+# In ns1: egress use TC to add back VLAN tag 4011
+#  (del cmd)
+#  tc qdisc del dev $DEVNS1 clsact 2> /dev/null
+#
+ip netns exec ${NS1} tc qdisc add dev $DEVNS1 clsact
+ip netns exec ${NS1} tc filter add dev $DEVNS1 egress \
+  prio 1 handle 1 bpf da obj $BPF_FILE sec tc_vlan_push
+
+# Now the namespaces can reach each-other, test with ping:
+ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1
+ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2
+
+# Second test: Replace xdp prog, that fully remove vlan header
+#
+# Catch kernel bug for generic-XDP, that does didn't allow us to
+# remove a VLAN header, because skb->protocol still contain VLAN
+# ETH_P_8021Q indication, and this cause overwriting of our changes.
+#
+export XDP_PROG=xdp_vlan_remove_outer2
+ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE off
+ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG
+
+# Now the namespaces should still be able reach each-other, test with ping:
+ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1
+ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2