Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

12 files changed, 827 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
new file mode 100644
index 000000000..8e3b786a7
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := \
+	bond-arp-interval-causes-panic.sh \
+	bond-break-lacpdu-tx.sh \
+	bond-lladdr-target.sh \
+	dev_addr_lists.sh \
+	mode-1-recovery-updelay.sh \
+	mode-2-recovery-updelay.sh \
+	option_prio.sh
+
+TEST_FILES := \
+	lag_lib.sh \
+	net_forwarding_lib.sh
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh
new file mode 100755
index 000000000..71c00bfaf
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# cause kernel oops in bond_rr_gen_slave_id
+DEBUG=${DEBUG:-0}
+
+set -e
+test ${DEBUG} -ne 0 && set -x
+
+finish()
+{
+	ip netns delete server || true
+	ip netns delete client || true
+	ip link del link1_1 || true
+}
+
+trap finish EXIT
+
+client_ip4=192.168.1.198
+server_ip4=192.168.1.254
+
+# setup kernel so it reboots after causing the panic
+echo 180 >/proc/sys/kernel/panic
+
+# build namespaces
+ip link add dev link1_1 type veth peer name link1_2
+
+ip netns add "server"
+ip link set dev link1_2 netns server up name eth0
+ip netns exec server ip addr add ${server_ip4}/24 dev eth0
+
+ip netns add "client"
+ip link set dev link1_1 netns client down name eth0
+ip netns exec client ip link add dev bond0 down type bond mode 1 \
+	miimon 100 all_slaves_active 1
+ip netns exec client ip link set dev eth0 down master bond0
+ip netns exec client ip link set dev bond0 up
+ip netns exec client ip addr add ${client_ip4}/24 dev bond0
+ip netns exec client ping -c 5 $server_ip4 >/dev/null
+
+ip netns exec client ip link set dev eth0 down nomaster
+ip netns exec client ip link set dev bond0 down
+ip netns exec client ip link set dev bond0 type bond mode 0 \
+	arp_interval 1000 arp_ip_target "+${server_ip4}"
+ip netns exec client ip link set dev eth0 down master bond0
+ip netns exec client ip link set dev bond0 up
+ip netns exec client ping -c 5 $server_ip4 >/dev/null
+
+exit 0
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
new file mode 100755
index 000000000..47ab90596
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
@@ -0,0 +1,81 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify LACPDUs get transmitted after setting the MAC address of
+#   the bond.
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=2020773
+#
+#       +---------+
+#       | fab-br0 |
+#       +---------+
+#            |
+#       +---------+
+#       |  fbond  |
+#       +---------+
+#        |       |
+#    +------+ +------+
+#    |veth1 | |veth2 |
+#    +------+ +------+
+#
+# We use veths instead of physical interfaces
+
+set -e
+tmp=$(mktemp -q dump.XXXXXX)
+cleanup() {
+	ip link del fab-br0 >/dev/null 2>&1 || :
+	ip link del fbond  >/dev/null 2>&1 || :
+	ip link del veth1-bond  >/dev/null 2>&1 || :
+	ip link del veth2-bond  >/dev/null 2>&1 || :
+	modprobe -r bonding  >/dev/null 2>&1 || :
+	rm -f -- ${tmp}
+}
+
+trap cleanup 0 1 2
+cleanup
+sleep 1
+
+# create the bridge
+ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \
+	forward_delay 15
+
+# create the bond
+ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \
+	ad_actor_sys_prio 65535 lacp_rate fast
+
+# set bond address
+ip link set fbond address 52:54:00:3B:7C:A6
+ip link set fbond up
+
+# set again bond sysfs parameters
+ip link set fbond type bond ad_actor_sys_prio 65535
+
+# create veths
+ip link add name veth1-bond type veth peer name veth1-end
+ip link add name veth2-bond type veth peer name veth2-end
+
+# add ports
+ip link set fbond master fab-br0
+ip link set veth1-bond down master fbond
+ip link set veth2-bond down master fbond
+
+# bring up
+ip link set veth1-end up
+ip link set veth2-end up
+ip link set fab-br0 up
+ip link set fbond up
+ip addr add dev fab-br0 10.0.0.3
+
+tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 &
+sleep 15
+pkill tcpdump >/dev/null 2>&1
+rc=0
+num=$(grep "packets captured" ${tmp} | awk '{print $1}')
+if test "$num" -gt 0; then
+	echo "PASS, captured ${num}"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh
new file mode 100755
index 000000000..89af402fa
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify bond interface could up when set IPv6 link local address target.
+#
+#  +----------------+
+#  |      br0       |
+#  |       |        |    sw
+#  | veth0   veth1  |
+#  +---+-------+----+
+#      |       |
+#  +---+-------+----+
+#  | veth0   veth1  |
+#  |       |        |    host
+#  |     bond0      |
+#  +----------------+
+#
+# We use veths instead of physical interfaces
+sw="sw-$(mktemp -u XXXXXX)"
+host="ns-$(mktemp -u XXXXXX)"
+
+cleanup()
+{
+	ip netns del $sw
+	ip netns del $host
+}
+
+trap cleanup 0 1 2
+
+ip netns add $sw
+ip netns add $host
+
+ip -n $host link add veth0 type veth peer name veth0 netns $sw
+ip -n $host link add veth1 type veth peer name veth1 netns $sw
+
+ip -n $sw link add br0 type bridge
+ip -n $sw link set br0 up
+sw_lladdr=$(ip -n $sw addr show br0 | awk '/fe80/{print $2}' | cut -d'/' -f1)
+# sleep some time to make sure bridge lladdr pass DAD
+sleep 2
+
+ip -n $host link add bond0 type bond mode 1 ns_ip6_target ${sw_lladdr} \
+	arp_validate 3 arp_interval 1000
+# add a lladdr for bond to make sure there is a route to target
+ip -n $host addr add fe80::beef/64 dev bond0
+ip -n $host link set bond0 up
+ip -n $host link set veth0 master bond0
+ip -n $host link set veth1 master bond0
+
+ip -n $sw link set veth0 master br0
+ip -n $sw link set veth1 master br0
+ip -n $sw link set veth0 up
+ip -n $sw link set veth1 up
+
+sleep 5
+
+rc=0
+if ip -n $host link show bond0 | grep -q LOWER_UP; then
+	echo "PASS"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc
diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
new file mode 100644
index 000000000..70638fa50
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -0,0 +1,2 @@
+CONFIG_BONDING=y
+CONFIG_MACVLAN=y
diff --git a/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh
new file mode 100755
index 000000000..5cfe7d8eb
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh
@@ -0,0 +1,109 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bond device handling of addr lists (dev->uc, mc)
+#
+
+ALL_TESTS="
+	bond_cleanup_mode1
+	bond_cleanup_mode4
+	bond_listen_lacpdu_multicast_case_down
+	bond_listen_lacpdu_multicast_case_up
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+source "$lib_dir"/lag_lib.sh
+
+
+destroy()
+{
+	local ifnames=(dummy1 dummy2 bond1 mv0)
+	local ifname
+
+	for ifname in "${ifnames[@]}"; do
+		ip link del "$ifname" &>/dev/null
+	done
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+
+# bond driver control paths vary between modes that have a primary slave
+# (bond_uses_primary()) and others. Test both kinds of modes.
+
+bond_cleanup_mode1()
+{
+	RET=0
+
+	test_LAG_cleanup "bonding" "active-backup"
+}
+
+bond_cleanup_mode4() {
+	RET=0
+
+	test_LAG_cleanup "bonding" "802.3ad"
+}
+
+bond_listen_lacpdu_multicast()
+{
+	# Initial state of bond device, up | down
+	local init_state=$1
+	local lacpdu_mc="01:80:c2:00:00:02"
+
+	ip link add dummy1 type dummy
+	ip link add bond1 "$init_state" type bond mode 802.3ad
+	ip link set dev dummy1 master bond1
+	if [ "$init_state" = "down" ]; then
+		ip link set dev bond1 up
+	fi
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (1)"
+
+	ip link set dev bond1 down
+
+	not grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address still present on slave"
+
+	ip link set dev bond1 up
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (2)"
+
+	cleanup
+
+	log_test "bonding LACPDU multicast address to slave (from bond $init_state)"
+}
+
+# The LACPDU mc addr is added by different paths depending on the initial state
+# of the bond when enslaving a device. Test both cases.
+
+bond_listen_lacpdu_multicast_case_down()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "down"
+}
+
+bond_listen_lacpdu_multicast_case_up()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "up"
+}
+
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
new file mode 100644
index 000000000..2a268b17b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NAMESPACES=""
+
+# Test that a link aggregation device (bonding, team) removes the hardware
+# addresses that it adds on its underlying devices.
+test_LAG_cleanup()
+{
+	local driver=$1
+	local mode=$2
+	local ucaddr="02:00:00:12:34:56"
+	local addr6="fe80::78:9abc/64"
+	local mcaddr="33:33:ff:78:9a:bc"
+	local name
+
+	ip link add dummy1 type dummy
+	ip link add dummy2 type dummy
+	if [ "$driver" = "bonding" ]; then
+		name="bond1"
+		ip link add "$name" up type bond mode "$mode"
+		ip link set dev dummy1 master "$name"
+		ip link set dev dummy2 master "$name"
+	elif [ "$driver" = "team" ]; then
+		name="team0"
+		teamd -d -c '
+			{
+				"device": "'"$name"'",
+				"runner": {
+					"name": "'"$mode"'"
+				},
+				"ports": {
+					"dummy1":
+						{},
+					"dummy2":
+						{}
+				}
+			}
+		'
+		ip link set dev "$name" up
+	else
+		check_err 1
+		log_test test_LAG_cleanup ": unknown driver \"$driver\""
+		return
+	fi
+
+	# Used to test dev->uc handling
+	ip link add mv0 link "$name" up address "$ucaddr" type macvlan
+	# Used to test dev->mc handling
+	ip address add "$addr6" dev "$name"
+	ip link set dev "$name" down
+	ip link del "$name"
+
+	not grep_bridge_fdb "$ucaddr" bridge fdb show >/dev/null
+	check_err $? "macvlan unicast address still present on a slave"
+
+	not grep_bridge_fdb "$mcaddr" bridge fdb show >/dev/null
+	check_err $? "IPv6 solicited-node multicast mac address still present on a slave"
+
+	cleanup
+
+	log_test "$driver cleanup mode $mode"
+}
+
+# Build a generic 2 node net namespace with 2 connections
+# between the namespaces
+#
+#  +-----------+       +-----------+
+#  | node1     |       | node2     |
+#  |           |       |           |
+#  |           |       |           |
+#  |      eth0 +-------+ eth0      |
+#  |           |       |           |
+#  |      eth1 +-------+ eth1      |
+#  |           |       |           |
+#  +-----------+       +-----------+
+lag_setup2x2()
+{
+	local state=${1:-down}
+	local namespaces="lag_node1 lag_node2"
+
+	# create namespaces
+	for n in ${namespaces}; do
+		ip netns add ${n}
+	done
+
+	# wire up namespaces
+	ip link add name lag1 type veth peer name lag1-end
+	ip link set dev lag1 netns lag_node1 $state name eth0
+	ip link set dev lag1-end netns lag_node2 $state name eth0
+
+	ip link add name lag1 type veth peer name lag1-end
+	ip link set dev lag1 netns lag_node1 $state name eth1
+	ip link set dev lag1-end netns lag_node2 $state name eth1
+
+	NAMESPACES="${namespaces}"
+}
+
+# cleanup all lag related namespaces and remove the bonding module
+lag_cleanup()
+{
+	for n in ${NAMESPACES}; do
+		ip netns delete ${n} >/dev/null 2>&1 || true
+	done
+	modprobe -r bonding
+}
+
+SWITCH="lag_node1"
+CLIENT="lag_node2"
+CLIENTIP="172.20.2.1"
+SWITCHIP="172.20.2.2"
+
+lag_setup_network()
+{
+	lag_setup2x2 "down"
+
+	# create switch
+	ip netns exec ${SWITCH} ip link add br0 up type bridge
+	ip netns exec ${SWITCH} ip link set eth0 master br0 up
+	ip netns exec ${SWITCH} ip link set eth1 master br0 up
+	ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0
+}
+
+lag_reset_network()
+{
+	ip netns exec ${CLIENT} ip link del bond0
+	ip netns exec ${SWITCH} ip link set eth0 up
+	ip netns exec ${SWITCH} ip link set eth1 up
+}
+
+create_bond()
+{
+	# create client
+	ip netns exec ${CLIENT} ip link set eth0 down
+	ip netns exec ${CLIENT} ip link set eth1 down
+
+	ip netns exec ${CLIENT} ip link add bond0 type bond $@
+	ip netns exec ${CLIENT} ip link set eth0 master bond0
+	ip netns exec ${CLIENT} ip link set eth1 master bond0
+	ip netns exec ${CLIENT} ip link set bond0 up
+	ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0
+}
+
+test_bond_recovery()
+{
+	RET=0
+
+	create_bond $@
+
+	# verify connectivity
+	ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+	check_err $? "No connectivity"
+
+	# force the links of the bond down
+	ip netns exec ${SWITCH} ip link set eth0 down
+	sleep 2
+	ip netns exec ${SWITCH} ip link set eth0 up
+	ip netns exec ${SWITCH} ip link set eth1 down
+
+	# re-verify connectivity
+	ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+
+	local rc=$?
+	check_err $rc "Bond failed to recover"
+	log_test "$1 ($2) bond recovery"
+	lag_reset_network
+}
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
new file mode 100755
index 000000000..ad4c845a4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#  When the bond is configured with down/updelay and the link state of
+#  slave members flaps if there are no remaining members up the bond
+#  should immediately select a member to bring up. (from bonding.txt
+#  section 13.1 paragraph 4)
+#
+#  +-------------+       +-----------+
+#  | client      |       | switch    |
+#  |             |       |           |
+#  |    +--------| link1 |-----+     |
+#  |    |        +-------+     |     |
+#  |    |        |       |     |     |
+#  |    |        +-------+     |     |
+#  |    | bond   | link2 | Br0 |     |
+#  +-------------+       +-----------+
+#     172.20.2.1           172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+	lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 1 miimon 100 updelay 0
+test_bond_recovery mode 1 miimon 100 updelay 200
+test_bond_recovery mode 1 miimon 100 updelay 500
+test_bond_recovery mode 1 miimon 100 updelay 1000
+test_bond_recovery mode 1 miimon 100 updelay 2000
+test_bond_recovery mode 1 miimon 100 updelay 5000
+test_bond_recovery mode 1 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
new file mode 100755
index 000000000..2330d3745
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#  When the bond is configured with down/updelay and the link state of
+#  slave members flaps if there are no remaining members up the bond
+#  should immediately select a member to bring up. (from bonding.txt
+#  section 13.1 paragraph 4)
+#
+#  +-------------+       +-----------+
+#  | client      |       | switch    |
+#  |             |       |           |
+#  |    +--------| link1 |-----+     |
+#  |    |        +-------+     |     |
+#  |    |        |       |     |     |
+#  |    |        +-------+     |     |
+#  |    | bond   | link2 | Br0 |     |
+#  +-------------+       +-----------+
+#     172.20.2.1           172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+	lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 2 miimon 100 updelay 0
+test_bond_recovery mode 2 miimon 100 updelay 200
+test_bond_recovery mode 2 miimon 100 updelay 500
+test_bond_recovery mode 2 miimon 100 updelay 1000
+test_bond_recovery mode 2 miimon 100 updelay 2000
+test_bond_recovery mode 2 miimon 100 updelay 5000
+test_bond_recovery mode 2 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh
new file mode 120000
index 000000000..39c96828c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh
@@ -0,0 +1 @@
+../../../net/forwarding/lib.sh
\ No newline at end of file
diff --git a/tools/testing/selftests/drivers/net/bonding/option_prio.sh b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
new file mode 100755
index 000000000..c32eebff5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
@@ -0,0 +1,245 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bonding option prio
+#
+
+ALL_TESTS="
+	prio_arp_ip_target_test
+	prio_miimon_test
+"
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+destroy()
+{
+	ip link del bond0 &>/dev/null
+	ip link del br0 &>/dev/null
+	ip link del veth0 &>/dev/null
+	ip link del veth1 &>/dev/null
+	ip link del veth2 &>/dev/null
+	ip netns del ns1 &>/dev/null
+	ip link del veth3 &>/dev/null
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+skip()
+{
+        local skip=1
+	ip link add name bond0 type bond mode 1 miimon 100 &>/dev/null
+	ip link add name veth0 type veth peer name veth0_p
+	ip link set veth0 master bond0
+
+	# check if iproute support prio option
+	ip link set dev veth0 type bond_slave prio 10
+	[[ $? -ne 0 ]] && skip=0
+
+	# check if bonding support prio option
+	ip -d link show veth0 | grep -q "prio 10"
+	[[ $? -ne 0 ]] && skip=0
+
+	ip link del bond0 &>/dev/null
+	ip link del veth0
+
+	return $skip
+}
+
+active_slave=""
+check_active_slave()
+{
+	local target_active_slave=$1
+	active_slave="$(cat /sys/class/net/bond0/bonding/active_slave)"
+	test "$active_slave" = "$target_active_slave"
+	check_err $? "Current active slave is $active_slave but not $target_active_slave"
+}
+
+
+# Test bonding prio option with mode=$mode monitor=$monitor
+# and primary_reselect=$primary_reselect
+prio_test()
+{
+	RET=0
+
+	local monitor=$1
+	local mode=$2
+	local primary_reselect=$3
+
+	local bond_ip4="192.169.1.2"
+	local peer_ip4="192.169.1.1"
+	local bond_ip6="2009:0a:0b::02"
+	local peer_ip6="2009:0a:0b::01"
+
+
+	# create veths
+	ip link add name veth0 type veth peer name veth0_p
+	ip link add name veth1 type veth peer name veth1_p
+	ip link add name veth2 type veth peer name veth2_p
+
+	# create bond
+	if [[ "$monitor" == "miimon" ]];then
+		ip link add name bond0 type bond mode $mode miimon 100 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "arp_ip_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 arp_ip_target $peer_ip4 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "ns_ip6_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 ns_ip6_target $peer_ip6 primary veth1 primary_reselect $primary_reselect
+	fi
+	ip link set bond0 up
+	ip link set veth0 master bond0
+	ip link set veth1 master bond0
+	ip link set veth2 master bond0
+	# check bonding member prio value
+	ip link set dev veth0 type bond_slave prio 0
+	ip link set dev veth1 type bond_slave prio 10
+	ip link set dev veth2 type bond_slave prio 11
+	ip -d link show veth0 | grep -q 'prio 0'
+	check_err $? "veth0 prio is not 0"
+	ip -d link show veth1 | grep -q 'prio 10'
+	check_err $? "veth0 prio is not 10"
+	ip -d link show veth2 | grep -q 'prio 11'
+	check_err $? "veth0 prio is not 11"
+
+	ip link set veth0 up
+	ip link set veth1 up
+	ip link set veth2 up
+	ip link set veth0_p up
+	ip link set veth1_p up
+	ip link set veth2_p up
+
+	# prepare ping target
+	ip link add name br0 type bridge
+	ip link set br0 up
+	ip link set veth0_p master br0
+	ip link set veth1_p master br0
+	ip link set veth2_p master br0
+	ip link add name veth3 type veth peer name veth3_p
+	ip netns add ns1
+	ip link set veth3_p master br0 up
+	ip link set veth3 netns ns1 up
+	ip netns exec ns1 ip addr add $peer_ip4/24 dev veth3
+	ip netns exec ns1 ip addr add $peer_ip6/64 dev veth3
+	ip addr add $bond_ip4/24 dev bond0
+	ip addr add $bond_ip6/64 dev bond0
+	sleep 5
+
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 1."
+	ping6 $peer_ip6 -c5 -I bond0 &>/dev/null
+	check_err $? "ping6 failed 1."
+
+	# active salve should be the primary slave
+	check_active_slave veth1
+
+	# active slave should be the higher prio slave
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 2."
+	check_active_slave veth2
+
+	# when only 1 slave is up
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 3."
+	check_active_slave veth0
+
+	# when a higher prio slave change to up
+	ip link set veth2 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 4."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth2"
+			;;
+		"1")
+			check_active_slave "veth0"
+			;;
+		"2")
+			check_active_slave "veth0"
+			;;
+	esac
+	local pre_active_slave=$active_slave
+
+	# when the primary slave change to up
+	ip link set veth1 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 5."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth1"
+			;;
+		"1")
+			check_active_slave "$pre_active_slave"
+			;;
+		"2")
+			check_active_slave "$pre_active_slave"
+			ip link set $active_slave down
+			ping $peer_ip4 -c5 -I bond0 &>/dev/null
+			check_err $? "ping failed 6."
+			check_active_slave "veth1"
+			;;
+	esac
+
+	# Test changing bond salve prio
+	if [[ "$primary_reselect" == "0" ]];then
+		ip link set dev veth0 type bond_slave prio 1000000
+		ip link set dev veth1 type bond_slave prio 0
+		ip link set dev veth2 type bond_slave prio -50
+		ip -d link show veth0 | grep -q 'prio 1000000'
+		check_err $? "veth0 prio is not 1000000"
+		ip -d link show veth1 | grep -q 'prio 0'
+		check_err $? "veth1 prio is not 0"
+		ip -d link show veth2 | grep -q 'prio -50'
+		check_err $? "veth3 prio is not -50"
+		check_active_slave "veth1"
+
+		ip link set $active_slave down
+		ping $peer_ip4 -c5 -I bond0 &>/dev/null
+		check_err $? "ping failed 7."
+		check_active_slave "veth0"
+	fi
+
+	cleanup
+
+	log_test "prio_test" "Test bonding option 'prio' with mode=$mode monitor=$monitor and primary_reselect=$primary_reselect"
+}
+
+prio_miimon_test()
+{
+	local mode
+	local primary_reselect
+
+	for mode in 1 5 6; do
+		for primary_reselect in 0 1 2; do
+			prio_test "miimon" $mode $primary_reselect
+		done
+	done
+}
+
+prio_arp_ip_target_test()
+{
+	local primary_reselect
+
+	for primary_reselect in 0 1 2; do
+		prio_test "arp_ip_target" 1 $primary_reselect
+	done
+}
+
+if skip;then
+	log_test_skip "option_prio.sh" "Current iproute doesn't support 'prio'."
+	exit 0
+fi
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings
new file mode 100644
index 000000000..6091b45d2
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/settings
@@ -0,0 +1 @@
+timeout=120