diff options
author | 2023-02-21 18:24:12 -0800 | |
---|---|---|
committer | 2023-02-21 18:24:12 -0800 | |
commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh | |
download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh')
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh | 1025 |
1 files changed, 1025 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh new file mode 100755 index 000000000..fb850e0ec --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -0,0 +1,1025 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2. +# It tries to exercise as many code paths in the eRP state machine as +# possible. + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ + multiple_masks_test ctcam_edge_cases_test delta_simple_test \ + delta_two_masks_one_key_test delta_simple_rehash_test \ + bloom_simple_test bloom_complex_test bloom_delta_test" +NUM_NETIFS=2 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 +} + +tp_record() +{ + local tracepoint=$1 + local cmd=$2 + + perf record -q -e $tracepoint $cmd + return $? +} + +tp_record_all() +{ + local tracepoint=$1 + local seconds=$2 + + perf record -a -q -e $tracepoint sleep $seconds + return $? +} + +__tp_hit_count() +{ + local tracepoint=$1 + + local perf_output=`perf script -F trace:event,trace` + return `echo $perf_output | grep "$tracepoint:" | wc -l` +} + +tp_check_hits() +{ + local tracepoint=$1 + local count=$2 + + __tp_hit_count $tracepoint + if [[ "$?" -ne "$count" ]]; then + return 1 + fi + return 0 +} + +tp_check_hits_any() +{ + local tracepoint=$1 + + __tp_hit_count $tracepoint + if [[ "$?" -eq "0" ]]; then + return 1 + fi + return 0 +} + +single_mask_test() +{ + # When only a single mask is required, the device uses the master + # mask and not the eRP table. Verify that under this mode the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.51.100.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 2 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match lowest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Single filter - did not match after delete" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "single mask test ($tcflags)" +} + +identical_filters_test() +{ + # When two filters that only differ in their priority are used, + # one needs to be inserted into the C-TCAM. This test verifies + # that filters are correctly spilled to C-TCAM and that the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match C-TCAM filter after A-TCAM delete" + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match C-TCAM filter after A-TCAM add" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter after C-TCAM delete" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "identical filters test ($tcflags)" +} + +two_masks_test() +{ + # When more than one mask is required, the eRP table is used. This + # test verifies that the eRP table is correctly allocated and used + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "two masks test ($tcflags)" +} + +multiple_masks_test() +{ + # The number of masks in a region is limited. Once the maximum + # number of masks has been reached filters that require new + # masks are spilled to the C-TCAM. This test verifies that + # spillage is performed correctly and that the right filter is + # matched + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + local index + + RET=0 + + NUM_MASKS=32 + NUM_ERPS=16 + BASE_INDEX=100 + + for i in $(eval echo {1..$NUM_MASKS}); do + index=$((BASE_INDEX - i)) + + if ((i > NUM_ERPS)); then + exp_hits=1 + err_msg="$i filters - C-TCAM spill did not happen when it was expected" + else + exp_hits=0 + err_msg="$i filters - C-TCAM spill happened when it should not" + fi + + tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + "tc filter add dev $h2 ingress protocol ip pref $index \ + handle $index \ + flower $tcflags \ + dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \ + $exp_hits + check_err $? "$err_msg" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "$i filters - did not match highest priority (add)" + done + + for i in $(eval echo {$NUM_MASKS..1}); do + index=$((BASE_INDEX - i)) + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 2 + check_err $? "$i filters - did not match highest priority (del)" + + tc filter del dev $h2 ingress protocol ip pref $index \ + handle $index flower + done + + log_test "multiple masks test ($tcflags)" +} + +ctcam_two_atcam_masks_test() +{ + RET=0 + + # First case: C-TCAM is disabled when there are two A-TCAM masks. + # We push a filter into the C-TCAM by using two identical filters + # as in identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + # Delete both A-TCAM and C-TCAM filters and make sure the remaining + # A-TCAM filter still works + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "ctcam with two atcam masks test ($tcflags)" +} + +ctcam_one_atcam_mask_test() +{ + RET=0 + + # Second case: C-TCAM is disabled when there is one A-TCAM mask. + # The test is similar to identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match C-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with one atcam mask test ($tcflags)" +} + +ctcam_no_atcam_masks_test() +{ + RET=0 + + # Third case: C-TCAM is disabled when there are no A-TCAM masks + # This test exercises the code path that transitions the eRP table + # to its initial state after deleting the last C-TCAM mask + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with no atcam masks test ($tcflags)" +} + +ctcam_edge_cases_test() +{ + # When the C-TCAM is disabled after deleting the last C-TCAM + # mask, we want to make sure the eRP state machine is put in + # the correct state + + ctcam_two_atcam_masks_test + ctcam_one_atcam_mask_test + ctcam_no_atcam_masks_test +} + +delta_simple_test() +{ + # The first filter will create eRP, the second filter will fit into + # the first eRP with delta. Remove the first rule then and check that + # the eRP stays (referenced by the second filter). + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 1 + check_err $? "eRP was not created" + + tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "objagg:objagg_obj_root_create" 0 + check_err $? "eRP was incorrectly created" + tp_check_hits "objagg:objagg_obj_parent_assign" 1 + check_err $? "delta was not created" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 1 handle 101 flower" + tp_check_hits "objagg:objagg_obj_root_destroy" 0 + check_err $? "eRP was incorrectly destroyed" + tp_check_hits "objagg:objagg_obj_parent_unassign" 0 + check_err $? "delta was incorrectly destroyed" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after the first was removed" + + tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \ + pref 2 handle 102 flower" + tp_check_hits "objagg:objagg_obj_parent_unassign" 1 + check_err $? "delta was not destroyed" + tp_check_hits "objagg:objagg_obj_root_destroy" 1 + check_err $? "eRP was not destroyed" + + log_test "delta simple test ($tcflags)" +} + +delta_two_masks_one_key_test() +{ + # If 2 keys are the same and only differ in mask in a way that + # they belong under the same ERP (second is delta of the first), + # there should be no C-TCAM spill. + + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the first rule" + + tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ + pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ + action drop" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 + check_err $? "incorrect C-TCAM spill while inserting the second rule" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "delta two masks one key test ($tcflags)" +} + +delta_simple_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.1.0/25 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.3.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + log_test "delta simple rehash test ($tcflags)" +} + +delta_simple_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_err $? "Migrate trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_err $? "Migrate end trace was not hit" + tp_record_all mlxsw:* 3 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_err $? "Rehash trace was not hit" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate + check_fail $? "Migrate trace was hit when no migration should happen" + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end + check_fail $? "Migrate end trace was hit when no migration should happen" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + log_test "delta simple IPv6 rehash test ($tcflags)" +} + +TEST_RULE_BASE=256 +declare -a test_rules_inserted + +test_rule_add() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower $tcflags \ + src_ip 2001:db8:1::$hexnumber action drop\n" + test_rules_inserted[$index]=true +} + +test_rule_del() +{ + local iface=$1 + local index=$2 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ! ${test_rules_inserted[$index]} ; then + return + fi + + local number=$(( $index + $TEST_RULE_BASE )) + printf -v hexnumber '%x' $number + + batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \ + handle $number flower\n" + test_rules_inserted[$index]=false +} + +test_rule_add_or_remove() +{ + local iface=$1 + local tcflags=$2 + local index=$3 + + if ! [ ${test_rules_inserted[$index]} ] ; then + test_rules_inserted[$index]=false + fi + if ${test_rules_inserted[$index]} ; then + test_rule_del $iface $index + else + test_rule_add $iface $tcflags $index + fi +} + +test_rule_add_or_remove_random_batch() +{ + local iface=$1 + local tcflags=$2 + local total_count=$3 + local skip=0 + local count=0 + local MAXSKIP=20 + local MAXCOUNT=20 + + for ((i=1;i<=total_count;i++)); do + if (( $skip == 0 )) && (($count == 0)); then + ((skip=$RANDOM % $MAXSKIP + 1)) + ((count=$RANDOM % $MAXCOUNT + 1)) + fi + if (( $skip != 0 )); then + ((skip-=1)) + else + ((count-=1)) + test_rule_add_or_remove $iface $tcflags $i + fi + done +} + +delta_massive_ipv6_rehash_test() +{ + RET=0 + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7 + tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash + check_fail $? "Rehash trace was hit even when rehash should be disabled" + + RANDOM=4432897 + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + echo -n -e $batch | tc -b - + + declare batch="" + test_rule_add_or_remove_random_batch $h2 $tcflags 5000 + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 3000 + check_err $? "Failed to set ACL region rehash interval" + + sleep 1 + + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \ + $tcflags dst_ip 2001:db8:1::0/121 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \ + $tcflags dst_ip 2001:db8:2::2 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \ + $tcflags dst_ip 2001:db8:3::0/120 action drop + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + echo -n -e $batch | tc -b - + + devlink dev param set $DEVLINK_DEV \ + name acl_region_rehash_interval cmode runtime value 0 + check_err $? "Failed to set ACL region rehash interval" + + $MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \ + -A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 103 1 + check_fail $? "Matched a wrong filter after rehash" + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match on correct filter after rehash" + + tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower + + declare batch="" + for i in {1..5000}; do + test_rule_del $h2 $tcflags $i + done + echo -e $batch | tc -b - + + log_test "delta massive IPv6 rehash test ($tcflags)" +} + +bloom_simple_test() +{ + # Bloom filter requires that the eRP table is used. This test + # verifies that Bloom filter is not harming correctness of ACLs. + # First, make sure that eRP table is used and then set rule patterns + # which are distant enough and will result skipping a lookup after + # consulting the Bloom filter. Although some eRP lookups are skipped, + # the correct filter should be hit. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \ + $tcflags dst_ip 198.51.100.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 104 1 + check_err $? "Single filter - did not match" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Low prio filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.0.0.0/8 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower + + log_test "bloom simple test ($tcflags)" +} + +bloom_complex_test() +{ + # Bloom filter index computation is affected from region ID, eRP + # ID and from the region key size. In order to excercise those parts + # of the Bloom filter code, use a series of regions, each with a + # different key size and send packet that should hit all of them. + local index + + RET=0 + NUM_CHAINS=4 + BASE_INDEX=100 + + # Create chain with up to 2 key blocks (ip_proto only) + tc chain add dev $h2 ingress chain 1 protocol ip flower \ + ip_proto tcp &> /dev/null + # Create chain with 2-4 key blocks (ip_proto, src MAC) + tc chain add dev $h2 ingress chain 2 protocol ip flower \ + ip_proto tcp \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null + # Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest) + tc chain add dev $h2 ingress chain 3 protocol ip flower \ + ip_proto tcp \ + dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \ + dst_ip 0.0.0.0/32 &> /dev/null + # Default chain contains all fields and therefore is 8-12 key blocks + tc chain add dev $h2 ingress chain 4 + + # We need at least 2 rules in every region to have eRP table active + # so create a dummy rule per chain using a different pattern + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX - 1 - i)) + tc filter add dev $h2 ingress chain $i protocol ip \ + pref 2 handle $index flower \ + $tcflags ip_proto tcp action drop + done + + # Add rules to test Bloom filter, each in a different chain + index=$BASE_INDEX + tc filter add dev $h2 ingress protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/16 action goto chain 1 + tc filter add dev $h2 ingress chain 1 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags action goto chain 2 + tc filter add dev $h2 ingress chain 2 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_mac $h1mac action goto chain 3 + tc filter add dev $h2 ingress chain 3 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags dst_ip 192.0.0.0/8 action goto chain 4 + tc filter add dev $h2 ingress chain 4 protocol ip \ + pref 1 handle $((++index)) flower \ + $tcflags src_ip 192.0.2.0/24 action drop + + # Send a packet that is supposed to hit all chains + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + for i in $(eval echo {0..$NUM_CHAINS}); do + index=$((BASE_INDEX + i + 1)) + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "Did not match chain $i" + done + + # Rules cleanup + for i in $(eval echo {$NUM_CHAINS..0}); do + index=$((BASE_INDEX - i - 1)) + tc filter del dev $h2 ingress chain $i \ + pref 2 handle $index flower + index=$((BASE_INDEX + i + 1)) + tc filter del dev $h2 ingress chain $i \ + pref 1 handle $index flower + done + + # Chains cleanup + for i in $(eval echo {$NUM_CHAINS..1}); do + tc chain del dev $h2 ingress chain $i + done + + log_test "bloom complex test ($tcflags)" +} + + +bloom_delta_test() +{ + # When multiple masks are used, the eRP table is activated. When + # masks are close enough (delta) the masks reside on the same + # eRP table. This test verifies that the eRP table is correctly + # allocated and used in delta condition and that Bloom filter is + # still functional with delta. + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.1.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.2.1.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Delta filters - did not match second filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "bloom delta test ($tcflags)" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for tc flower" + exit +else + tcflags="skip_sw" + tests_run +fi + +exit $EXIT_STATUS |