Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 953 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
new file mode 100755
index 000000000..1b08e042c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -0,0 +1,953 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+VNI_GEN=$RANDOM
+NSIM_ID=$((RANDOM % 1024))
+NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
+NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID
+NSIM_NETDEV=
+HAS_ETHTOOL=
+STATIC_ENTRIES=
+EXIT_STATUS=0
+num_cases=0
+num_errors=0
+
+clean_up_devs=( )
+
+function err_cnt {
+    echo "ERROR:" $@
+    EXIT_STATUS=1
+    ((num_errors++))
+    ((num_cases++))
+}
+
+function pass_cnt {
+    ((num_cases++))
+}
+
+function cleanup_tuns {
+    for dev in "${clean_up_devs[@]}"; do
+	[ -e /sys/class/net/$dev ] && ip link del dev $dev
+    done
+    clean_up_devs=( )
+}
+
+function cleanup_nsim {
+    if [ -e $NSIM_DEV_SYS ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/del_device
+    fi
+}
+
+function cleanup {
+    cleanup_tuns
+    cleanup_nsim
+}
+
+trap cleanup EXIT
+
+function new_vxlan {
+    local dev=$1
+    local dstport=$2
+    local lower=$3
+    local ipver=$4
+    local flags=$5
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type vxlan \
+       group $group \
+       dev $lower \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function new_geneve {
+    local dev=$1
+    local dstport=$2
+    local ipver=$3
+    local flags=$4
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type geneve \
+       remote $remote  \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function del_dev {
+    local dev=$1
+
+    ip link del dev $dev
+    check_tables
+}
+
+# Helpers for netdevsim port/type encoding
+function mke {
+    local port=$1
+    local type=$2
+
+    echo $((port << 16 | type))
+}
+
+function pre {
+    local val=$1
+
+    echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))"
+}
+
+function pre_ethtool {
+    local val=$1
+    local port=$((val >> 16))
+    local type=$((val & 0xffff))
+
+    case $type in
+	1)
+	    type_name="vxlan"
+	    ;;
+	2)
+	    type_name="geneve"
+	    ;;
+	4)
+	    type_name="vxlan-gpe"
+	    ;;
+	*)
+	    type_name="bit X"
+	    ;;
+    esac
+
+    echo "port $port, $type_name"
+}
+
+function check_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local -n expected=$2
+    local last=$3
+
+    read -a have < $path
+
+    if [ ${#expected[@]} -ne ${#have[@]} ]; then
+	echo "check_table: BAD NUMBER OF ITEMS"
+	return 0
+    fi
+
+    for i in "${!expected[@]}"; do
+	if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then
+	    pp_expected=`pre_ethtool ${expected[i]}`
+	    ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null
+	    if [ $? -ne 0 -a $last -ne 0 ]; then
+		err_cnt "ethtool table $1 on port $port: $pfx - $msg"
+		echo "       check_table: ethtool does not contain '$pp_expected'"
+		ethtool --show-tunnels $NSIM_NETDEV
+		return 0
+
+	    fi
+	fi
+
+	if [ ${expected[i]} != ${have[i]} ]; then
+	    if [ $last -ne 0 ]; then
+		err_cnt "table $1 on port $port: $pfx - $msg"
+		echo "       check_table: wrong entry $i"
+		echo "       expected: `pre ${expected[i]}`"
+		echo "       have:     `pre ${have[i]}`"
+		return 0
+	    fi
+	    return 1
+	fi
+    done
+
+    pass_cnt
+    return 0
+}
+
+function check_tables {
+    # Need retries in case we have workqueue making the changes
+    local retries=10
+
+    while ! check_table 0 exp0 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+    while ! check_table 1 exp1 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+
+    if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then
+	fail=0
+	for i in "${!STATIC_ENTRIES[@]}"; do
+	    pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}`
+	    cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected")
+	    if [ $cnt -ne 1 ]; then
+		err_cnt "ethtool static entry: $pfx - $msg"
+		echo "       check_table: ethtool does not contain '$pp_expected'"
+		ethtool --show-tunnels $NSIM_NETDEV
+		fail=1
+	    fi
+	done
+	[ $fail == 0 ] && pass_cnt
+    fi
+}
+
+function print_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    read -a have < $path
+
+    tree $NSIM_DEV_DFS/
+
+    echo "Port $port table $1:"
+
+    for i in "${!have[@]}"; do
+	echo "    `pre ${have[i]}`"
+    done
+
+}
+
+function print_tables {
+    print_table 0
+    print_table 1
+}
+
+function get_netdev_name {
+    local -n old=$1
+
+    new=$(ls /sys/class/net)
+
+    for netdev in $new; do
+	for check in $old; do
+            [ $netdev == $check ] && break
+	done
+
+	if [ $netdev != $check ]; then
+	    echo $netdev
+	    break
+	fi
+    done
+}
+
+###
+### Code start
+###
+
+# Probe ethtool support
+ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y
+
+modprobe netdevsim
+
+# Basic test
+pfx="basic"
+
+for port in 0 1; do
+    old_netdevs=$(ls /sys/class/net)
+    if [ $port -eq 0 ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/new_device
+    else
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+	echo 1 > $NSIM_DEV_SYS/new_port
+    fi
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+    msg="new NIC device created"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    msg="VxLAN v4 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlan0 4789 $NSIM_NETDEV
+    new_vxlan vxlan1 4789 $NSIM_NETDEV
+
+    msg="VxLAN v4 devices go down"
+    exp0=( 0 0 0 0 )
+    ifconfig vxlan1 down
+    ifconfig vxlan0 down
+    check_tables
+
+    msg="VxLAN v6 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlanA 4789 $NSIM_NETDEV 6
+
+    for ifc in vxlan0 vxlan1; do
+	ifconfig $ifc up
+    done
+
+    new_vxlan vxlanB 4789 $NSIM_NETDEV 6
+
+    msg="another VxLAN v6 devices"
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    new_vxlan vxlanC 4790 $NSIM_NETDEV 6
+
+    msg="Geneve device"
+    exp1=( `mke 6081 2` 0 0 0 )
+    new_geneve gnv0 6081
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    exp1=( `mke 6081 2` 0 0 0 )
+    check_tables
+
+    cleanup_tuns
+
+    msg="tunnels destroyed"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    modprobe -r geneve
+    modprobe -r vxlan
+    modprobe -r udp_tunnel
+
+    check_tables
+done
+
+modprobe -r netdevsim
+
+# Module tests
+pfx="module tests"
+
+if modinfo netdevsim | grep udp_tunnel >/dev/null; then
+    err_cnt "netdevsim depends on udp_tunnel"
+else
+    pass_cnt
+fi
+
+modprobe netdevsim
+
+old_netdevs=$(ls /sys/class/net)
+port=0
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep
+echo 0 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+modprobe -r vxlan
+modprobe -r udp_tunnel
+
+msg="remove tunnels"
+exp0=( 0 0 0 0 )
+check_tables
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+exp0=( 0 0 0 0 )
+
+modprobe -r netdevsim
+modprobe netdevsim
+
+# Overflow the table
+
+function overflow_table0 {
+    local pfx=$1
+
+    msg="create VxLANs 1/5"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="create VxLANs 2/5"
+    exp0=( `mke 10000 1` `mke 10001 1` 0 0 )
+    new_vxlan vxlan1 10001 $NSIM_NETDEV
+
+    msg="create VxLANs 3/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 )
+    new_vxlan vxlan2 10002 $NSIM_NETDEV
+
+    msg="create VxLANs 4/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` )
+    new_vxlan vxlan3 10003 $NSIM_NETDEV
+
+    msg="create VxLANs 5/5"
+    new_vxlan vxlan4 10004 $NSIM_NETDEV
+}
+
+function overflow_table1 {
+    local pfx=$1
+
+    msg="create GENEVE 1/5"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="create GENEVE 2/5"
+    exp1=( `mke 20000 2` `mke 20001 2` 0 0 )
+    new_geneve gnv1 20001
+
+    msg="create GENEVE 3/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 )
+    new_geneve gnv2 20002
+
+    msg="create GENEVE 4/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` )
+    new_geneve gnv3 20003
+
+    msg="create GENEVE 5/5"
+    new_geneve gnv4 20004
+}
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Sync all
+pfx="sync all"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Destroy full NIC
+pfx="destroy full"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "destroy NIC"
+    overflow_table1 "destroy NIC"
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# IPv4 only
+pfx="IPv4 only"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA1 10000 $NSIM_NETDEV 6
+
+    ip link set dev vxlanA0 down
+    ip link set dev vxlanA0 up
+    check_tables
+
+    msg="create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="down VxLANs v4"
+    exp0=( 0 0 0 0 )
+    ip link set dev vxlan0 down
+    check_tables
+
+    msg="up VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ip link set dev vxlan0 up
+    check_tables
+
+    msg="destroy VxLANs v4"
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+
+    msg="recreate VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    del_dev vxlanA0
+    del_dev vxlanA1
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Failures
+pfx="error injection"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+
+    msg="1 - create VxLANs v6"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="1 - create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="1 - remove VxLANs v4"
+    del_dev vxlan0
+
+    msg="1 - remove VxLANs v6"
+    exp0=( 0 0 0 0 )
+    del_dev vxlanA0
+
+    msg="2 - create GENEVE"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="2 - destroy GENEVE"
+    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    exp1=( `mke 20000 2` 0 0 0 )
+    del_dev gnv0
+
+    msg="2 - create second GENEVE"
+    exp1=( 0 `mke 20001 2` 0 0 )
+    new_geneve gnv0 20001
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# netdev flags
+pfx="netdev flags"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="turn off"
+    exp0=( 0 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+
+    msg="create VxLANs v4 - off"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="created off - turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# device initiated reset
+pfx="reset notification"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 10000 1` 0 0 0 )
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# shared port tables
+pfx="table sharing"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+echo 0 > $NSIM_DEV_DFS/udp_ports_open_only
+echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+echo 1 > $NSIM_DEV_DFS/udp_ports_shared
+
+old_netdevs=$(ls /sys/class/net)
+echo 1 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+old_netdevs=$(ls /sys/class/net)
+echo 2 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV2=`get_netdev_name old_netdevs`
+
+msg="VxLAN v4 devices"
+exp0=( `mke 4789 1` 0 0 0 )
+exp1=( 0 0 0 0 )
+new_vxlan vxlan0 4789 $NSIM_NETDEV
+new_vxlan vxlan1 4789 $NSIM_NETDEV2
+
+msg="VxLAN v4 devices go down"
+exp0=( 0 0 0 0 )
+ifconfig vxlan1 down
+ifconfig vxlan0 down
+check_tables
+
+for ifc in vxlan0 vxlan1; do
+    ifconfig $ifc up
+done
+
+msg="VxLAN v6 device"
+exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+new_vxlan vxlanC 4790 $NSIM_NETDEV 6
+
+msg="Geneve device"
+exp1=( `mke 6081 2` 0 0 0 )
+new_geneve gnv0 6081
+
+msg="NIC device goes down"
+ifconfig $NSIM_NETDEV down
+check_tables
+
+msg="NIC device goes up again"
+ifconfig $NSIM_NETDEV up
+check_tables
+
+for i in `seq 2`; do
+    msg="turn feature off - 1, rep $i"
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn feature off - 2, rep $i"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn feature on - 1, rep $i"
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    exp1=( `mke 6081 2` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="turn feature on - 2, rep $i"
+    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on
+    check_tables
+done
+
+msg="tunnels destroyed 1"
+cleanup_tuns
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+overflow_table0 "overflow NIC table"
+
+msg="re-add a port"
+
+echo 2 > $NSIM_DEV_SYS/del_port
+echo 2 > $NSIM_DEV_SYS/new_port
+check_tables
+
+msg="replace VxLAN in overflow table"
+exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+del_dev vxlan1
+
+msg="vacate VxLAN in overflow table"
+exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+del_dev vxlan2
+
+echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+check_tables
+
+msg="tunnels destroyed 2"
+cleanup_tuns
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+echo 1 > $NSIM_DEV_SYS/del_port
+echo 2 > $NSIM_DEV_SYS/del_port
+
+cleanup_nsim
+
+# Static IANA port
+pfx="static IANA vxlan"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan
+STATIC_ENTRIES=( `mke 4789 1` )
+
+port=1
+old_netdevs=$(ls /sys/class/net)
+echo $port > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+msg="check empty"
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+msg="add on static port"
+new_vxlan vxlan0 4789 $NSIM_NETDEV
+new_vxlan vxlan1 4789 $NSIM_NETDEV
+
+msg="add on different port"
+exp0=( `mke 4790 1` 0 0 0 )
+new_vxlan vxlan2 4790 $NSIM_NETDEV
+
+cleanup_tuns
+
+msg="tunnels destroyed"
+exp0=( 0 0 0 0 )
+exp1=( 0 0 0 0 )
+check_tables
+
+msg="different type"
+new_geneve gnv0	4789
+
+cleanup_tuns
+cleanup_nsim
+
+# END
+
+modprobe -r netdevsim
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $num_cases checks"
+else
+    echo "FAILED $num_errors/$num_cases checks"
+fi
+
+exit $EXIT_STATUS