Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 327 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh
new file mode 100755
index 000000000..bed748dde
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh
@@ -0,0 +1,327 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2021-2022 NXP
+
+# Note: On LS1028A, in lack of enough user ports, this setup requires patching
+# the device tree to use the second CPU port as a user port
+
+WAIT_TIME=1
+NUM_NETIFS=4
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+source $lib_dir/tsn_lib.sh
+
+UDS_ADDRESS_H1="/var/run/ptp4l_h1"
+UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1"
+
+# Tunables
+NUM_PKTS=1000
+STREAM_VID=100
+STREAM_PRIO=6
+# Use a conservative cycle of 10 ms to allow the test to still pass when the
+# kernel has some extra overhead like lockdep etc
+CYCLE_TIME_NS=10000000
+# Create two Gate Control List entries, one OPEN and one CLOSE, of equal
+# durations
+GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2))
+# Give 2/3 of the cycle time to user space and 1/3 to the kernel
+FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3))
+# Shift the isochron base time by half the gate time, so that packets are
+# always received by swp1 close to the middle of the time slot, to minimize
+# inaccuracies due to network sync
+SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2))
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+# Chain number exported by the ocelot driver for
+# Per-Stream Filtering and Policing filters
+PSFP()
+{
+	echo 30000
+}
+
+psfp_chain_create()
+{
+	local if_name=$1
+
+	tc qdisc add dev $if_name clsact
+
+	tc filter add dev $if_name ingress chain 0 pref 49152 flower \
+		skip_sw action goto chain $(PSFP)
+}
+
+psfp_chain_destroy()
+{
+	local if_name=$1
+
+	tc qdisc del dev $if_name clsact
+}
+
+psfp_filter_check()
+{
+	local expected=$1
+	local packets=""
+	local drops=""
+	local stats=""
+
+	stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1)
+	packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets")
+	drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops")
+
+	if ! [ "${packets}" = "${expected}" ]; then
+		printf "Expected filter to match on %d packets but matched on %d instead\n" \
+			"${expected}" "${packets}"
+	fi
+
+	echo "Hardware filter reports ${drops} drops"
+}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+switch_create()
+{
+	local h2_mac_addr=$(mac_get $h2)
+
+	ip link set ${swp1} up
+	ip link set ${swp2} up
+
+	ip link add br0 type bridge vlan_filtering 1
+	ip link set ${swp1} master br0
+	ip link set ${swp2} master br0
+	ip link set br0 up
+
+	bridge vlan add dev ${swp2} vid ${STREAM_VID}
+	bridge vlan add dev ${swp1} vid ${STREAM_VID}
+	# PSFP on Ocelot requires the filter to also be added to the bridge
+	# FDB, and not be removed
+	bridge fdb add dev ${swp2} \
+		${h2_mac_addr} vlan ${STREAM_VID} static master
+
+	psfp_chain_create ${swp1}
+
+	tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \
+		protocol 802.1Q flower skip_sw \
+		dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \
+		action gate base-time 0.000000000 \
+		sched-entry OPEN  ${GATE_DURATION_NS} -1 -1 \
+		sched-entry CLOSE ${GATE_DURATION_NS} -1 -1
+}
+
+switch_destroy()
+{
+	psfp_chain_destroy ${swp1}
+	ip link del br0
+}
+
+txtime_setup()
+{
+	local if_name=$1
+
+	tc qdisc add dev ${if_name} clsact
+	# Classify PTP on TC 7 and isochron on TC 6
+	tc filter add dev ${if_name} egress protocol 0x88f7 \
+		flower action skbedit priority 7
+	tc filter add dev ${if_name} egress protocol 802.1Q \
+		flower vlan_ethtype 0xdead action skbedit priority 6
+	tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \
+		queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
+		map 0 1 2 3 4 5 6 7 \
+		hw 1
+	# Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1.
+	tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \
+		clockid CLOCK_TAI offload delta ${FUDGE_FACTOR}
+}
+
+txtime_cleanup()
+{
+	local if_name=$1
+
+	tc qdisc del dev ${if_name} root
+	tc qdisc del dev ${if_name} clsact
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+
+	txtime_setup ${h1}
+
+	# Set up swp1 as a master PHC for h1, synchronized to the local
+	# CLOCK_REALTIME.
+	phc2sys_start ${UDS_ADDRESS_SWP1}
+
+	# Assumption true for LS1028A: h1 and h2 use the same PHC. So by
+	# synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized
+	# to swp1 (and both to CLOCK_REALTIME).
+	ptp4l_start ${h1} true ${UDS_ADDRESS_H1}
+	ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1}
+
+	# Make sure there are no filter matches at the beginning of the test
+	psfp_filter_check 0
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ptp4l_stop ${swp1}
+	ptp4l_stop ${h1}
+	phc2sys_stop
+	isochron_recv_stop
+
+	txtime_cleanup ${h1}
+
+	h2_destroy
+	h1_destroy
+	switch_destroy
+
+	vrf_cleanup
+}
+
+debug_incorrectly_dropped_packets()
+{
+	local isochron_dat=$1
+	local dropped_seqids
+	local seqid
+
+	echo "Packets incorrectly dropped:"
+
+	dropped_seqids=$(isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "%u RX hw %T\n" \
+		--printf-args "qR" | \
+		grep 'RX hw 0.000000000' | \
+		awk '{print $1}')
+
+	for seqid in ${dropped_seqids}; do
+		isochron report \
+			--input-file "${isochron_dat}" \
+			--start ${seqid} --stop ${seqid} \
+			--printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \
+			--printf-args "qST"
+	done
+}
+
+debug_incorrectly_received_packets()
+{
+	local isochron_dat=$1
+
+	echo "Packets incorrectly received:"
+
+	isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \
+		--printf-args "qSTR" |
+		grep -v 'HW RX timestamp 0.000000000'
+}
+
+run_test()
+{
+	local base_time=$1
+	local expected=$2
+	local test_name=$3
+	local debug=$4
+	local isochron_dat="$(mktemp)"
+	local extra_args=""
+	local received
+
+	isochron_do \
+		"${h1}" \
+		"${h2}" \
+		"${UDS_ADDRESS_H1}" \
+		"" \
+		"${base_time}" \
+		"${CYCLE_TIME_NS}" \
+		"${SHIFT_TIME_NS}" \
+		"${NUM_PKTS}" \
+		"${STREAM_VID}" \
+		"${STREAM_PRIO}" \
+		"" \
+		"${isochron_dat}"
+
+	# Count all received packets by looking at the non-zero RX timestamps
+	received=$(isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "%u\n" --printf-args "R" | \
+		grep -w -v '0' | wc -l)
+
+	if [ "${received}" = "${expected}" ]; then
+		RET=0
+	else
+		RET=1
+		echo "Expected isochron to receive ${expected} packets but received ${received}"
+	fi
+
+	log_test "${test_name}"
+
+	if [ "$RET" = "1" ]; then
+		${debug} "${isochron_dat}"
+	fi
+
+	rm ${isochron_dat} 2> /dev/null
+}
+
+test_gate_in_band()
+{
+	# Send packets in-band with the OPEN gate entry
+	run_test 0.000000000 ${NUM_PKTS} "In band" \
+		debug_incorrectly_dropped_packets
+
+	psfp_filter_check ${NUM_PKTS}
+}
+
+test_gate_out_of_band()
+{
+	# Send packets in-band with the CLOSE gate entry
+	run_test 0.005000000 0 "Out of band" \
+		debug_incorrectly_received_packets
+
+	psfp_filter_check $((2 * ${NUM_PKTS}))
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_gate_in_band
+	test_gate_out_of_band
+"
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS