Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 195 insertions, 0 deletions

diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
new file mode 100644
index 000000000..779f3e62e
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -0,0 +1,195 @@
+clear_trace() { # reset trace output
+    echo > trace
+}
+
+disable_tracing() { # stop trace recording
+    echo 0 > tracing_on
+}
+
+enable_tracing() { # start trace recording
+    echo 1 > tracing_on
+}
+
+reset_tracer() { # reset the current tracer
+    echo nop > current_tracer
+}
+
+reset_trigger_file() {
+    # remove action triggers first
+    grep -H ':on[^:]*(' $@ |
+    while read line; do
+        cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["`
+	file=`echo $line | cut -f1 -d:`
+	echo "!$cmd" >> $file
+    done
+    grep -Hv ^# $@ |
+    while read line; do
+        cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["`
+	file=`echo $line | cut -f1 -d:`
+	echo "!$cmd" > $file
+    done
+}
+
+reset_trigger() { # reset all current setting triggers
+    if [ -d events/synthetic ]; then
+        reset_trigger_file events/synthetic/*/trigger
+    fi
+    reset_trigger_file events/*/*/trigger
+}
+
+reset_events_filter() { # reset all current setting filters
+    grep -v ^none events/*/*/filter |
+    while read line; do
+	echo 0 > `echo $line | cut -f1 -d:`
+    done
+}
+
+reset_ftrace_filter() { # reset all triggers in set_ftrace_filter
+    if [ ! -f set_ftrace_filter ]; then
+      return 0
+    fi
+    echo > set_ftrace_filter
+    grep -v '^#' set_ftrace_filter | while read t; do
+	tr=`echo $t | cut -d: -f2`
+	if [ "$tr" = "" ]; then
+	    continue
+	fi
+	if ! grep -q "$t" set_ftrace_filter; then
+		continue;
+	fi
+	name=`echo $t | cut -d: -f1 | cut -d' ' -f1`
+	if [ $tr = "enable_event" -o $tr = "disable_event" ]; then
+	    tr=`echo $t | cut -d: -f2-4`
+	    limit=`echo $t | cut -d: -f5`
+	else
+	    tr=`echo $t | cut -d: -f2`
+	    limit=`echo $t | cut -d: -f3`
+	fi
+	if [ "$limit" != "unlimited" ]; then
+	    tr="$tr:$limit"
+	fi
+	echo "!$name:$tr" > set_ftrace_filter
+    done
+}
+
+disable_events() {
+    echo 0 > events/enable
+}
+
+clear_synthetic_events() { # reset all current synthetic events
+    grep -v ^# synthetic_events |
+    while read line; do
+        echo "!$line" >> synthetic_events
+    done
+}
+
+clear_dynamic_events() { # reset all current dynamic events
+    again=1
+    stop=1
+    # loop mulitple times as some events require other to be removed first
+    while [ $again -eq 1 ]; do
+	stop=$((stop+1))
+	# Prevent infinite loops
+	if [ $stop -gt 10 ]; then
+	    break;
+	fi
+	again=2
+	grep -v '^#' dynamic_events|
+	while read line; do
+	    del=`echo $line | sed -e 's/^.\([^ ]*\).*/-\1/'`
+	    if ! echo "$del" >> dynamic_events; then
+		again=1
+	    fi
+	done
+    done
+}
+
+initialize_ftrace() { # Reset ftrace to initial-state
+# As the initial state, ftrace will be set to nop tracer,
+# no events, no triggers, no filters, no function filters,
+# no probes, and tracing on.
+    disable_tracing
+    reset_tracer
+    reset_trigger
+    reset_events_filter
+    reset_ftrace_filter
+    disable_events
+    clear_dynamic_events
+    [ -f set_event_pid ] && echo > set_event_pid
+    [ -f set_ftrace_pid ] && echo > set_ftrace_pid
+    [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace
+    [ -f set_graph_function ] && echo | tee set_graph_*
+    [ -f stack_trace_filter ] && echo > stack_trace_filter
+    [ -f kprobe_events ] && echo > kprobe_events
+    [ -f uprobe_events ] && echo > uprobe_events
+    [ -f synthetic_events ] && echo > synthetic_events
+    [ -f snapshot ] && echo 0 > snapshot
+
+# Stop tracing while reading the trace file by default, to prevent
+# the test results while checking it and to avoid taking a long time
+# to check the result.
+    [ -f options/pause-on-trace ] && echo 1 > options/pause-on-trace
+
+    clear_trace
+    enable_tracing
+}
+
+finish_ftrace() {
+    initialize_ftrace
+# And recover it to default.
+    [ -f options/pause-on-trace ] && echo 0 > options/pause-on-trace
+}
+
+check_requires() { # Check required files and tracers
+    for i in "$@" ; do
+	p=${i%:program}
+        r=${i%:README}
+        t=${i%:tracer}
+	if [ $p != $i ]; then
+	    if ! which $p ; then
+                echo "Required program $p is not found."
+                exit_unresolved
+	    fi
+        elif [ $t != $i ]; then
+            if ! grep -wq $t available_tracers ; then
+                echo "Required tracer $t is not configured."
+                exit_unsupported
+            fi
+        elif [ "$r" != "$i" ]; then
+            if ! grep -Fq "$r" README ; then
+                echo "Required feature pattern \"$r\" is not in README."
+                exit_unsupported
+            fi
+        elif [ ! -e $i ]; then
+            echo "Required feature interface $i doesn't exist."
+            exit_unsupported
+        fi
+    done
+}
+
+LOCALHOST=127.0.0.1
+
+yield() {
+    ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1
+}
+
+# The fork function in the kernel was renamed from "_do_fork" to
+# "kernel_fork". As older tests should still work with older kernels
+# as well as newer kernels, check which version of fork is used on this
+# kernel so that the tests can use the fork function for the running kernel.
+FUNCTION_FORK=`(if grep '\bkernel_clone\b' /proc/kallsyms > /dev/null; then
+                echo kernel_clone; else echo '_do_fork'; fi)`
+
+# Since probe event command may include backslash, explicitly use printf "%s"
+# to NOT interpret it.
+ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file
+    pos=$(printf "%s" "${2%^*}" | wc -c) # error position
+    command=$(printf "%s" "$2" | tr -d ^)
+    echo "Test command: $command"
+    echo > error_log
+    (! printf "%s" "$command" >> "$3" ) 2> /dev/null
+    grep "$1: error:" -A 3 error_log
+    N=$(tail -n 1 error_log | wc -c)
+    # "  Command: " and "^\n" => 13
+    test $(expr 13 + $pos) -eq $N
+}