Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 243 insertions, 0 deletions

diff --git a/tools/testing/selftests/kexec/test_kexec_file_load.sh b/tools/testing/selftests/kexec/test_kexec_file_load.sh
new file mode 100755
index 000000000..c9ccb3c93
--- /dev/null
+++ b/tools/testing/selftests/kexec/test_kexec_file_load.sh
@@ -0,0 +1,243 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Loading a kernel image via the kexec_file_load syscall can verify either
+# the IMA signature stored in the security.ima xattr or the PE signature,
+# both signatures depending on the IMA policy, or none.
+#
+# To determine whether the kernel image is signed, this test depends
+# on pesign and getfattr.  This test also requires the kernel to be
+# built with CONFIG_IKCONFIG enabled and either CONFIG_IKCONFIG_PROC
+# enabled or access to the extract-ikconfig script.
+
+TEST="KEXEC_FILE_LOAD"
+. ./kexec_common_lib.sh
+
+trap "{ rm -f $IKCONFIG ; }" EXIT
+
+# Some of the IMA builtin policies may require the kexec kernel image to
+# be signed, but these policy rules may be replaced with a custom
+# policy.  Only CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS persists after
+# loading a custom policy.  Check if it is enabled, before reading the
+# IMA runtime sysfs policy file.
+# Return 1 for IMA signature required and 0 for not required.
+is_ima_sig_required()
+{
+	local ret=0
+
+	kconfig_enabled "CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y" \
+		"IMA kernel image signature required"
+	if [ $? -eq 1 ]; then
+		log_info "IMA signature required"
+		return 1
+	fi
+
+	# The architecture specific or a custom policy may require the
+	# kexec kernel image be signed.  Policy rules are walked
+	# sequentially.  As a result, a policy rule may be defined, but
+	# might not necessarily be used.  This test assumes if a policy
+	# rule is specified, that is the intent.
+
+	# First check for appended signature (modsig), then xattr
+	if [ $ima_read_policy -eq 1 ]; then
+		check_ima_policy "appraise" "func=KEXEC_KERNEL_CHECK" \
+			"appraise_type=imasig|modsig"
+		ret=$?
+		if [ $ret -eq 1 ]; then
+			log_info "IMA or appended(modsig) signature required"
+		else
+			check_ima_policy "appraise" "func=KEXEC_KERNEL_CHECK" \
+				"appraise_type=imasig"
+			ret=$?
+			[ $ret -eq 1 ] && log_info "IMA signature required";
+		fi
+	fi
+	return $ret
+}
+
+# The kexec_file_load_test() is complicated enough, require pesign.
+# Return 1 for PE signature found and 0 for not found.
+check_for_pesig()
+{
+	which pesign > /dev/null 2>&1 || log_skip "pesign not found"
+
+	pesign -i $KERNEL_IMAGE --show-signature | grep -q "No signatures"
+	local ret=$?
+	if [ $ret -eq 1 ]; then
+		log_info "kexec kernel image PE signed"
+	else
+		log_info "kexec kernel image not PE signed"
+	fi
+	return $ret
+}
+
+# The kexec_file_load_test() is complicated enough, require getfattr.
+# Return 1 for IMA signature found and 0 for not found.
+check_for_imasig()
+{
+	local ret=0
+
+	which getfattr > /dev/null 2>&1
+	if [ $?	-eq 1 ]; then
+		log_skip "getfattr not found"
+	fi
+
+	line=$(getfattr -n security.ima -e hex --absolute-names $KERNEL_IMAGE 2>&1)
+	echo $line | grep -q "security.ima=0x03"
+	if [ $? -eq 0 ]; then
+		ret=1
+		log_info "kexec kernel image IMA signed"
+	else
+		log_info "kexec kernel image not IMA signed"
+	fi
+	return $ret
+}
+
+# Return 1 for appended signature (modsig) found and 0 for not found.
+check_for_modsig()
+{
+	local module_sig_string="~Module signature appended~"
+	local ret=0
+
+	tail --bytes $((${#module_sig_string} + 1)) $KERNEL_IMAGE | \
+		grep -q "$module_sig_string"
+	if [ $? -eq 0 ]; then
+		ret=1
+		log_info "kexec kernel image modsig signed"
+	else
+		log_info "kexec kernel image not modsig signed"
+	fi
+	return $ret
+}
+
+kexec_file_load_test()
+{
+	local succeed_msg="kexec_file_load succeeded"
+	local failed_msg="kexec_file_load failed"
+	local key_msg="try enabling the CONFIG_INTEGRITY_PLATFORM_KEYRING"
+
+	line=$(kexec --load --kexec-file-syscall $KERNEL_IMAGE 2>&1)
+
+	if [ $? -eq 0 ]; then
+		kexec --unload --kexec-file-syscall
+
+		# In secureboot mode with an architecture  specific
+		# policy, make sure either an IMA or PE signature exists.
+		if [ $secureboot -eq 1 ] && [ $arch_policy -eq 1 ] && \
+			[ $ima_signed -eq 0 ] && [ $pe_signed -eq 0 ] \
+			  && [ $ima_modsig -eq 0 ]; then
+			log_fail "$succeed_msg (missing sig)"
+		fi
+
+		if [ $kexec_sig_required -eq 1 -o $pe_sig_required -eq 1 ] \
+		     && [ $pe_signed -eq 0 ]; then
+			log_fail "$succeed_msg (missing PE sig)"
+		fi
+
+		if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ] \
+		     && [ $ima_modsig -eq 0 ]; then
+			log_fail "$succeed_msg (missing IMA sig)"
+		fi
+
+		if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \
+		    && [ $ima_sig_required -eq 0 ] && [ $ima_signed -eq 0 ] \
+	            && [ $ima_read_policy -eq 0 ]; then
+			log_fail "$succeed_msg (possibly missing IMA sig)"
+		fi
+
+		if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 0 ]; then
+			log_info "No signature verification required"
+		elif [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \
+		    && [ $ima_sig_required -eq 0 ] && [ $ima_signed -eq 0 ] \
+	            && [ $ima_read_policy -eq 1 ]; then
+			log_info "No signature verification required"
+		fi
+
+		log_pass "$succeed_msg"
+	fi
+
+	# Check the reason for the kexec_file_load failure
+	echo $line | grep -q "Required key not available"
+	if [ $? -eq 0 ]; then
+		if [ $platform_keyring -eq 0 ]; then
+			log_pass "$failed_msg (-ENOKEY), $key_msg"
+		else
+			log_pass "$failed_msg (-ENOKEY)"
+		fi
+	fi
+
+	if [ $kexec_sig_required -eq 1 -o $pe_sig_required -eq 1 ] \
+	     && [ $pe_signed -eq 0 ]; then
+		log_pass "$failed_msg (missing PE sig)"
+	fi
+
+	if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ]; then
+		log_pass "$failed_msg (missing IMA sig)"
+	fi
+
+	if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \
+	    && [ $ima_sig_required -eq 0 ] && [ $ima_read_policy -eq 0 ] \
+	    && [ $ima_signed -eq 0 ]; then
+		log_pass "$failed_msg (possibly missing IMA sig)"
+	fi
+
+	log_pass "$failed_msg"
+	return 0
+}
+
+# kexec requires root privileges
+require_root_privileges
+
+# get the kernel config
+get_kconfig
+
+kconfig_enabled "CONFIG_KEXEC_FILE=y" "kexec_file_load is enabled"
+if [ $? -eq 0 ]; then
+	log_skip "kexec_file_load is not enabled"
+fi
+
+# Determine which kernel config options are enabled
+kconfig_enabled "CONFIG_IMA_APPRAISE=y" "IMA enabled"
+ima_appraise=$?
+
+kconfig_enabled "CONFIG_IMA_ARCH_POLICY=y" \
+	"architecture specific policy enabled"
+arch_policy=$?
+
+kconfig_enabled "CONFIG_INTEGRITY_PLATFORM_KEYRING=y" \
+	"platform keyring enabled"
+platform_keyring=$?
+
+kconfig_enabled "CONFIG_IMA_READ_POLICY=y" "reading IMA policy permitted"
+ima_read_policy=$?
+
+kconfig_enabled "CONFIG_KEXEC_SIG_FORCE=y" \
+	"kexec signed kernel image required"
+kexec_sig_required=$?
+
+kconfig_enabled "CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y" \
+	"PE signed kernel image required"
+pe_sig_required=$?
+
+is_ima_sig_required
+ima_sig_required=$?
+
+get_secureboot_mode
+secureboot=$?
+
+# Are there pe and ima signatures
+if [ "$(get_arch)" == 'ppc64le' ]; then
+	pe_signed=0
+else
+	check_for_pesig
+	pe_signed=$?
+fi
+
+check_for_imasig
+ima_signed=$?
+
+check_for_modsig
+ima_modsig=$?
+
+# Test loading the kernel image via kexec_file_load syscall
+kexec_file_load_test