Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 716 insertions, 0 deletions

diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c
new file mode 100644
index 000000000..eef816b80
--- /dev/null
+++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * vgic init sequence tests
+ *
+ * Copyright (C) 2020, Red Hat, Inc.
+ */
+#define _GNU_SOURCE
+#include <linux/kernel.h>
+#include <sys/syscall.h>
+#include <asm/kvm.h>
+#include <asm/kvm_para.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+#include "vgic.h"
+
+#define NR_VCPUS		4
+
+#define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset)
+
+#define GICR_TYPER 0x8
+
+#define VGIC_DEV_IS_V2(_d) ((_d) == KVM_DEV_TYPE_ARM_VGIC_V2)
+#define VGIC_DEV_IS_V3(_d) ((_d) == KVM_DEV_TYPE_ARM_VGIC_V3)
+
+struct vm_gic {
+	struct kvm_vm *vm;
+	int gic_fd;
+	uint32_t gic_dev_type;
+};
+
+static uint64_t max_phys_size;
+
+/*
+ * Helpers to access a redistributor register and verify the ioctl() failed or
+ * succeeded as expected, and provided the correct value on success.
+ */
+static void v3_redist_reg_get_errno(int gicv3_fd, int vcpu, int offset,
+				    int want, const char *msg)
+{
+	uint32_t ignored_val;
+	int ret = __kvm_device_attr_get(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS,
+					REG_OFFSET(vcpu, offset), &ignored_val);
+
+	TEST_ASSERT(ret && errno == want, "%s; want errno = %d", msg, want);
+}
+
+static void v3_redist_reg_get(int gicv3_fd, int vcpu, int offset, uint32_t want,
+			      const char *msg)
+{
+	uint32_t val;
+
+	kvm_device_attr_get(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS,
+			    REG_OFFSET(vcpu, offset), &val);
+	TEST_ASSERT(val == want, "%s; want '0x%x', got '0x%x'", msg, want, val);
+}
+
+/* dummy guest code */
+static void guest_code(void)
+{
+	GUEST_SYNC(0);
+	GUEST_SYNC(1);
+	GUEST_SYNC(2);
+	GUEST_DONE();
+}
+
+/* we don't want to assert on run execution, hence that helper */
+static int run_vcpu(struct kvm_vcpu *vcpu)
+{
+	return __vcpu_run(vcpu) ? -errno : 0;
+}
+
+static struct vm_gic vm_gic_create_with_vcpus(uint32_t gic_dev_type,
+					      uint32_t nr_vcpus,
+					      struct kvm_vcpu *vcpus[])
+{
+	struct vm_gic v;
+
+	v.gic_dev_type = gic_dev_type;
+	v.vm = vm_create_with_vcpus(nr_vcpus, guest_code, vcpus);
+	v.gic_fd = kvm_create_device(v.vm, gic_dev_type);
+
+	return v;
+}
+
+static void vm_gic_destroy(struct vm_gic *v)
+{
+	close(v->gic_fd);
+	kvm_vm_free(v->vm);
+}
+
+struct vgic_region_attr {
+	uint64_t attr;
+	uint64_t size;
+	uint64_t alignment;
+};
+
+struct vgic_region_attr gic_v3_dist_region = {
+	.attr = KVM_VGIC_V3_ADDR_TYPE_DIST,
+	.size = 0x10000,
+	.alignment = 0x10000,
+};
+
+struct vgic_region_attr gic_v3_redist_region = {
+	.attr = KVM_VGIC_V3_ADDR_TYPE_REDIST,
+	.size = NR_VCPUS * 0x20000,
+	.alignment = 0x10000,
+};
+
+struct vgic_region_attr gic_v2_dist_region = {
+	.attr = KVM_VGIC_V2_ADDR_TYPE_DIST,
+	.size = 0x1000,
+	.alignment = 0x1000,
+};
+
+struct vgic_region_attr gic_v2_cpu_region = {
+	.attr = KVM_VGIC_V2_ADDR_TYPE_CPU,
+	.size = 0x2000,
+	.alignment = 0x1000,
+};
+
+/**
+ * Helper routine that performs KVM device tests in general. Eventually the
+ * ARM_VGIC (GICv2 or GICv3) device gets created with an overlapping
+ * DIST/REDIST (or DIST/CPUIF for GICv2). Assumption is 4 vcpus are going to be
+ * used hence the overlap. In the case of GICv3, A RDIST region is set at @0x0
+ * and a DIST region is set @0x70000. The GICv2 case sets a CPUIF @0x0 and a
+ * DIST region @0x1000.
+ */
+static void subtest_dist_rdist(struct vm_gic *v)
+{
+	int ret;
+	uint64_t addr;
+	struct vgic_region_attr rdist; /* CPU interface in GICv2*/
+	struct vgic_region_attr dist;
+
+	rdist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_redist_region
+						: gic_v2_cpu_region;
+	dist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_dist_region
+						: gic_v2_dist_region;
+
+	/* Check existing group/attributes */
+	kvm_has_device_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, dist.attr);
+
+	kvm_has_device_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, rdist.attr);
+
+	/* check non existing attribute */
+	ret = __kvm_has_device_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, -1);
+	TEST_ASSERT(ret && errno == ENXIO, "attribute not supported");
+
+	/* misaligned DIST and REDIST address settings */
+	addr = dist.alignment / 0x10;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    dist.attr, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "GIC dist base not aligned");
+
+	addr = rdist.alignment / 0x10;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    rdist.attr, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "GIC redist/cpu base not aligned");
+
+	/* out of range address */
+	addr = max_phys_size;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    dist.attr, &addr);
+	TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit");
+
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    rdist.attr, &addr);
+	TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit");
+
+	/* Space for half a rdist (a rdist is: 2 * rdist.alignment). */
+	addr = max_phys_size - dist.alignment;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    rdist.attr, &addr);
+	TEST_ASSERT(ret && errno == E2BIG,
+			"half of the redist is beyond IPA limit");
+
+	/* set REDIST base address @0x0*/
+	addr = 0x00000;
+	kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    rdist.attr, &addr);
+
+	/* Attempt to create a second legacy redistributor region */
+	addr = 0xE0000;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    rdist.attr, &addr);
+	TEST_ASSERT(ret && errno == EEXIST, "GIC redist base set again");
+
+	ret = __kvm_has_device_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				     KVM_VGIC_V3_ADDR_TYPE_REDIST);
+	if (!ret) {
+		/* Attempt to mix legacy and new redistributor regions */
+		addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0);
+		ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+					    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+		TEST_ASSERT(ret && errno == EINVAL,
+			    "attempt to mix GICv3 REDIST and REDIST_REGION");
+	}
+
+	/*
+	 * Set overlapping DIST / REDIST, cannot be detected here. Will be detected
+	 * on first vcpu run instead.
+	 */
+	addr = rdist.size - rdist.alignment;
+	kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    dist.attr, &addr);
+}
+
+/* Test the new REDIST region API */
+static void subtest_v3_redist_regions(struct vm_gic *v)
+{
+	uint64_t addr, expected_addr;
+	int ret;
+
+	ret = __kvm_has_device_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST);
+	TEST_ASSERT(!ret, "Multiple redist regions advertised");
+
+	addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 2, 0);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "redist region attr value with flags != 0");
+
+	addr = REDIST_REGION_ATTR_ADDR(0, 0x100000, 0, 0);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "redist region attr value with count== 0");
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL,
+		    "attempt to register the first rdist region with index != 0");
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x201000, 0, 1);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "rdist region with misaligned address");
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
+	kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "register an rdist region with already used index");
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x210000, 0, 2);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL,
+		    "register an rdist region overlapping with another one");
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 2);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "register redist region with index not +1");
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1);
+	kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	addr = REDIST_REGION_ATTR_ADDR(1, max_phys_size, 0, 2);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == E2BIG,
+		    "register redist region with base address beyond IPA range");
+
+	/* The last redist is above the pa range. */
+	addr = REDIST_REGION_ATTR_ADDR(2, max_phys_size - 0x30000, 0, 2);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == E2BIG,
+		    "register redist region with top address beyond IPA range");
+
+	addr = 0x260000;
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr);
+	TEST_ASSERT(ret && errno == EINVAL,
+		    "Mix KVM_VGIC_V3_ADDR_TYPE_REDIST and REDIST_REGION");
+
+	/*
+	 * Now there are 2 redist regions:
+	 * region 0 @ 0x200000 2 redists
+	 * region 1 @ 0x240000 1 redist
+	 * Attempt to read their characteristics
+	 */
+
+	addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 0);
+	expected_addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
+	ret = __kvm_device_attr_get(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #0");
+
+	addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 1);
+	expected_addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1);
+	ret = __kvm_device_attr_get(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #1");
+
+	addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 2);
+	ret = __kvm_device_attr_get(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == ENOENT, "read characteristics of non existing region");
+
+	addr = 0x260000;
+	kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_DIST, &addr);
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x260000, 0, 2);
+	ret = __kvm_device_attr_set(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "register redist region colliding with dist");
+}
+
+/*
+ * VGIC KVM device is created and initialized before the secondary CPUs
+ * get created
+ */
+static void test_vgic_then_vcpus(uint32_t gic_dev_type)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	struct vm_gic v;
+	int ret, i;
+
+	v = vm_gic_create_with_vcpus(gic_dev_type, 1, vcpus);
+
+	subtest_dist_rdist(&v);
+
+	/* Add the rest of the VCPUs */
+	for (i = 1; i < NR_VCPUS; ++i)
+		vcpus[i] = vm_vcpu_add(v.vm, i, guest_code);
+
+	ret = run_vcpu(vcpus[3]);
+	TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
+
+	vm_gic_destroy(&v);
+}
+
+/* All the VCPUs are created before the VGIC KVM device gets initialized */
+static void test_vcpus_then_vgic(uint32_t gic_dev_type)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	struct vm_gic v;
+	int ret;
+
+	v = vm_gic_create_with_vcpus(gic_dev_type, NR_VCPUS, vcpus);
+
+	subtest_dist_rdist(&v);
+
+	ret = run_vcpu(vcpus[3]);
+	TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
+
+	vm_gic_destroy(&v);
+}
+
+static void test_v3_new_redist_regions(void)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	void *dummy = NULL;
+	struct vm_gic v;
+	uint64_t addr;
+	int ret;
+
+	v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS, vcpus);
+	subtest_v3_redist_regions(&v);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	ret = run_vcpu(vcpus[3]);
+	TEST_ASSERT(ret == -ENXIO, "running without sufficient number of rdists");
+	vm_gic_destroy(&v);
+
+	/* step2 */
+
+	v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS, vcpus);
+	subtest_v3_redist_regions(&v);
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	ret = run_vcpu(vcpus[3]);
+	TEST_ASSERT(ret == -EBUSY, "running without vgic explicit init");
+
+	vm_gic_destroy(&v);
+
+	/* step 3 */
+
+	v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS, vcpus);
+	subtest_v3_redist_regions(&v);
+
+	ret = __kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, dummy);
+	TEST_ASSERT(ret && errno == EFAULT,
+		    "register a third region allowing to cover the 4 vcpus");
+
+	addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	ret = run_vcpu(vcpus[3]);
+	TEST_ASSERT(!ret, "vcpu run");
+
+	vm_gic_destroy(&v);
+}
+
+static void test_v3_typer_accesses(void)
+{
+	struct vm_gic v;
+	uint64_t addr;
+	int ret, i;
+
+	v.vm = vm_create(NR_VCPUS);
+	(void)vm_vcpu_add(v.vm, 0, guest_code);
+
+	v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3);
+
+	(void)vm_vcpu_add(v.vm, 3, guest_code);
+
+	v3_redist_reg_get_errno(v.gic_fd, 1, GICR_TYPER, EINVAL,
+				"attempting to read GICR_TYPER of non created vcpu");
+
+	(void)vm_vcpu_add(v.vm, 1, guest_code);
+
+	v3_redist_reg_get_errno(v.gic_fd, 1, GICR_TYPER, EBUSY,
+				"read GICR_TYPER before GIC initialized");
+
+	(void)vm_vcpu_add(v.vm, 2, guest_code);
+
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	for (i = 0; i < NR_VCPUS ; i++) {
+		v3_redist_reg_get(v.gic_fd, i, GICR_TYPER, i * 0x100,
+				  "read GICR_TYPER before rdist region setting");
+	}
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	/* The 2 first rdists should be put there (vcpu 0 and 3) */
+	v3_redist_reg_get(v.gic_fd, 0, GICR_TYPER, 0x0, "read typer of rdist #0");
+	v3_redist_reg_get(v.gic_fd, 3, GICR_TYPER, 0x310, "read typer of rdist #1");
+
+	addr = REDIST_REGION_ATTR_ADDR(10, 0x100000, 0, 1);
+	ret = __kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+	TEST_ASSERT(ret && errno == EINVAL, "collision with previous rdist region");
+
+	v3_redist_reg_get(v.gic_fd, 1, GICR_TYPER, 0x100,
+			  "no redist region attached to vcpu #1 yet, last cannot be returned");
+	v3_redist_reg_get(v.gic_fd, 2, GICR_TYPER, 0x200,
+			  "no redist region attached to vcpu #2, last cannot be returned");
+
+	addr = REDIST_REGION_ATTR_ADDR(10, 0x20000, 0, 1);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	v3_redist_reg_get(v.gic_fd, 1, GICR_TYPER, 0x100, "read typer of rdist #1");
+	v3_redist_reg_get(v.gic_fd, 2, GICR_TYPER, 0x210,
+			  "read typer of rdist #1, last properly returned");
+
+	vm_gic_destroy(&v);
+}
+
+static struct vm_gic vm_gic_v3_create_with_vcpuids(int nr_vcpus,
+						   uint32_t vcpuids[])
+{
+	struct vm_gic v;
+	int i;
+
+	v.vm = vm_create(nr_vcpus);
+	for (i = 0; i < nr_vcpus; i++)
+		vm_vcpu_add(v.vm, vcpuids[i], guest_code);
+
+	v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3);
+
+	return v;
+}
+
+/**
+ * Test GICR_TYPER last bit with new redist regions
+ * rdist regions #1 and #2 are contiguous
+ * rdist region #0 @0x100000 2 rdist capacity
+ *     rdists: 0, 3 (Last)
+ * rdist region #1 @0x240000 2 rdist capacity
+ *     rdists:  5, 4 (Last)
+ * rdist region #2 @0x200000 2 rdist capacity
+ *     rdists: 1, 2
+ */
+static void test_v3_last_bit_redist_regions(void)
+{
+	uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 };
+	struct vm_gic v;
+	uint64_t addr;
+
+	v = vm_gic_v3_create_with_vcpuids(ARRAY_SIZE(vcpuids), vcpuids);
+
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x100000, 0, 0);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x240000, 0, 1);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 2);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
+
+	v3_redist_reg_get(v.gic_fd, 0, GICR_TYPER, 0x000, "read typer of rdist #0");
+	v3_redist_reg_get(v.gic_fd, 1, GICR_TYPER, 0x100, "read typer of rdist #1");
+	v3_redist_reg_get(v.gic_fd, 2, GICR_TYPER, 0x200, "read typer of rdist #2");
+	v3_redist_reg_get(v.gic_fd, 3, GICR_TYPER, 0x310, "read typer of rdist #3");
+	v3_redist_reg_get(v.gic_fd, 5, GICR_TYPER, 0x500, "read typer of rdist #5");
+	v3_redist_reg_get(v.gic_fd, 4, GICR_TYPER, 0x410, "read typer of rdist #4");
+
+	vm_gic_destroy(&v);
+}
+
+/* Test last bit with legacy region */
+static void test_v3_last_bit_single_rdist(void)
+{
+	uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 };
+	struct vm_gic v;
+	uint64_t addr;
+
+	v = vm_gic_v3_create_with_vcpuids(ARRAY_SIZE(vcpuids), vcpuids);
+
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	addr = 0x10000;
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr);
+
+	v3_redist_reg_get(v.gic_fd, 0, GICR_TYPER, 0x000, "read typer of rdist #0");
+	v3_redist_reg_get(v.gic_fd, 3, GICR_TYPER, 0x300, "read typer of rdist #1");
+	v3_redist_reg_get(v.gic_fd, 5, GICR_TYPER, 0x500, "read typer of rdist #2");
+	v3_redist_reg_get(v.gic_fd, 1, GICR_TYPER, 0x100, "read typer of rdist #3");
+	v3_redist_reg_get(v.gic_fd, 2, GICR_TYPER, 0x210, "read typer of rdist #3");
+
+	vm_gic_destroy(&v);
+}
+
+/* Uses the legacy REDIST region API. */
+static void test_v3_redist_ipa_range_check_at_vcpu_run(void)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	struct vm_gic v;
+	int ret, i;
+	uint64_t addr;
+
+	v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, 1, vcpus);
+
+	/* Set space for 3 redists, we have 1 vcpu, so this succeeds. */
+	addr = max_phys_size - (3 * 2 * 0x10000);
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr);
+
+	addr = 0x00000;
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_V3_ADDR_TYPE_DIST, &addr);
+
+	/* Add the rest of the VCPUs */
+	for (i = 1; i < NR_VCPUS; ++i)
+		vcpus[i] = vm_vcpu_add(v.vm, i, guest_code);
+
+	kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+			    KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
+
+	/* Attempt to run a vcpu without enough redist space. */
+	ret = run_vcpu(vcpus[2]);
+	TEST_ASSERT(ret && errno == EINVAL,
+		"redist base+size above PA range detected on 1st vcpu run");
+
+	vm_gic_destroy(&v);
+}
+
+static void test_v3_its_region(void)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	struct vm_gic v;
+	uint64_t addr;
+	int its_fd, ret;
+
+	v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS, vcpus);
+	its_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_ITS);
+
+	addr = 0x401000;
+	ret = __kvm_device_attr_set(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_ITS_ADDR_TYPE, &addr);
+	TEST_ASSERT(ret && errno == EINVAL,
+		"ITS region with misaligned address");
+
+	addr = max_phys_size;
+	ret = __kvm_device_attr_set(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_ITS_ADDR_TYPE, &addr);
+	TEST_ASSERT(ret && errno == E2BIG,
+		"register ITS region with base address beyond IPA range");
+
+	addr = max_phys_size - 0x10000;
+	ret = __kvm_device_attr_set(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_ITS_ADDR_TYPE, &addr);
+	TEST_ASSERT(ret && errno == E2BIG,
+		"Half of ITS region is beyond IPA range");
+
+	/* This one succeeds setting the ITS base */
+	addr = 0x400000;
+	kvm_device_attr_set(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+			    KVM_VGIC_ITS_ADDR_TYPE, &addr);
+
+	addr = 0x300000;
+	ret = __kvm_device_attr_set(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
+				    KVM_VGIC_ITS_ADDR_TYPE, &addr);
+	TEST_ASSERT(ret && errno == EEXIST, "ITS base set again");
+
+	close(its_fd);
+	vm_gic_destroy(&v);
+}
+
+/*
+ * Returns 0 if it's possible to create GIC device of a given type (V2 or V3).
+ */
+int test_kvm_device(uint32_t gic_dev_type)
+{
+	struct kvm_vcpu *vcpus[NR_VCPUS];
+	struct vm_gic v;
+	uint32_t other;
+	int ret;
+
+	v.vm = vm_create_with_vcpus(NR_VCPUS, guest_code, vcpus);
+
+	/* try to create a non existing KVM device */
+	ret = __kvm_test_create_device(v.vm, 0);
+	TEST_ASSERT(ret && errno == ENODEV, "unsupported device");
+
+	/* trial mode */
+	ret = __kvm_test_create_device(v.vm, gic_dev_type);
+	if (ret)
+		return ret;
+	v.gic_fd = kvm_create_device(v.vm, gic_dev_type);
+
+	ret = __kvm_create_device(v.vm, gic_dev_type);
+	TEST_ASSERT(ret < 0 && errno == EEXIST, "create GIC device twice");
+
+	/* try to create the other gic_dev_type */
+	other = VGIC_DEV_IS_V2(gic_dev_type) ? KVM_DEV_TYPE_ARM_VGIC_V3
+					     : KVM_DEV_TYPE_ARM_VGIC_V2;
+
+	if (!__kvm_test_create_device(v.vm, other)) {
+		ret = __kvm_create_device(v.vm, other);
+		TEST_ASSERT(ret < 0 && (errno == EINVAL || errno == EEXIST),
+				"create GIC device while other version exists");
+	}
+
+	vm_gic_destroy(&v);
+
+	return 0;
+}
+
+void run_tests(uint32_t gic_dev_type)
+{
+	test_vcpus_then_vgic(gic_dev_type);
+	test_vgic_then_vcpus(gic_dev_type);
+
+	if (VGIC_DEV_IS_V3(gic_dev_type)) {
+		test_v3_new_redist_regions();
+		test_v3_typer_accesses();
+		test_v3_last_bit_redist_regions();
+		test_v3_last_bit_single_rdist();
+		test_v3_redist_ipa_range_check_at_vcpu_run();
+		test_v3_its_region();
+	}
+}
+
+int main(int ac, char **av)
+{
+	int ret;
+	int pa_bits;
+	int cnt_impl = 0;
+
+	pa_bits = vm_guest_mode_params[VM_MODE_DEFAULT].pa_bits;
+	max_phys_size = 1ULL << pa_bits;
+
+	ret = test_kvm_device(KVM_DEV_TYPE_ARM_VGIC_V3);
+	if (!ret) {
+		pr_info("Running GIC_v3 tests.\n");
+		run_tests(KVM_DEV_TYPE_ARM_VGIC_V3);
+		cnt_impl++;
+	}
+
+	ret = test_kvm_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+	if (!ret) {
+		pr_info("Running GIC_v2 tests.\n");
+		run_tests(KVM_DEV_TYPE_ARM_VGIC_V2);
+		cnt_impl++;
+	}
+
+	if (!cnt_impl) {
+		print_skip("No GICv2 nor GICv3 support");
+		exit(KSFT_SKIP);
+	}
+	return 0;
+}