Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 164 insertions, 0 deletions

diff --git a/tools/testing/selftests/kvm/lib/x86_64/svm.c b/tools/testing/selftests/kvm/lib/x86_64/svm.c
new file mode 100644
index 000000000..5495a92df
--- /dev/null
+++ b/tools/testing/selftests/kvm/lib/x86_64/svm.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tools/testing/selftests/kvm/lib/x86_64/svm.c
+ * Helpers used for nested SVM testing
+ * Largely inspired from KVM unit test svm.c
+ *
+ * Copyright (C) 2020, Red Hat, Inc.
+ */
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+#include "svm_util.h"
+
+#define SEV_DEV_PATH "/dev/sev"
+
+struct gpr64_regs guest_regs;
+u64 rflags;
+
+/* Allocate memory regions for nested SVM tests.
+ *
+ * Input Args:
+ *   vm - The VM to allocate guest-virtual addresses in.
+ *
+ * Output Args:
+ *   p_svm_gva - The guest virtual address for the struct svm_test_data.
+ *
+ * Return:
+ *   Pointer to structure with the addresses of the SVM areas.
+ */
+struct svm_test_data *
+vcpu_alloc_svm(struct kvm_vm *vm, vm_vaddr_t *p_svm_gva)
+{
+	vm_vaddr_t svm_gva = vm_vaddr_alloc_page(vm);
+	struct svm_test_data *svm = addr_gva2hva(vm, svm_gva);
+
+	svm->vmcb = (void *)vm_vaddr_alloc_page(vm);
+	svm->vmcb_hva = addr_gva2hva(vm, (uintptr_t)svm->vmcb);
+	svm->vmcb_gpa = addr_gva2gpa(vm, (uintptr_t)svm->vmcb);
+
+	svm->save_area = (void *)vm_vaddr_alloc_page(vm);
+	svm->save_area_hva = addr_gva2hva(vm, (uintptr_t)svm->save_area);
+	svm->save_area_gpa = addr_gva2gpa(vm, (uintptr_t)svm->save_area);
+
+	svm->msr = (void *)vm_vaddr_alloc_page(vm);
+	svm->msr_hva = addr_gva2hva(vm, (uintptr_t)svm->msr);
+	svm->msr_gpa = addr_gva2gpa(vm, (uintptr_t)svm->msr);
+	memset(svm->msr_hva, 0, getpagesize());
+
+	*p_svm_gva = svm_gva;
+	return svm;
+}
+
+static void vmcb_set_seg(struct vmcb_seg *seg, u16 selector,
+			 u64 base, u32 limit, u32 attr)
+{
+	seg->selector = selector;
+	seg->attrib = attr;
+	seg->limit = limit;
+	seg->base = base;
+}
+
+void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_rsp)
+{
+	struct vmcb *vmcb = svm->vmcb;
+	uint64_t vmcb_gpa = svm->vmcb_gpa;
+	struct vmcb_save_area *save = &vmcb->save;
+	struct vmcb_control_area *ctrl = &vmcb->control;
+	u32 data_seg_attr = 3 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK
+	      | SVM_SELECTOR_DB_MASK | SVM_SELECTOR_G_MASK;
+	u32 code_seg_attr = 9 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK
+		| SVM_SELECTOR_L_MASK | SVM_SELECTOR_G_MASK;
+	uint64_t efer;
+
+	efer = rdmsr(MSR_EFER);
+	wrmsr(MSR_EFER, efer | EFER_SVME);
+	wrmsr(MSR_VM_HSAVE_PA, svm->save_area_gpa);
+
+	memset(vmcb, 0, sizeof(*vmcb));
+	asm volatile ("vmsave %0\n\t" : : "a" (vmcb_gpa) : "memory");
+	vmcb_set_seg(&save->es, get_es(), 0, -1U, data_seg_attr);
+	vmcb_set_seg(&save->cs, get_cs(), 0, -1U, code_seg_attr);
+	vmcb_set_seg(&save->ss, get_ss(), 0, -1U, data_seg_attr);
+	vmcb_set_seg(&save->ds, get_ds(), 0, -1U, data_seg_attr);
+	vmcb_set_seg(&save->gdtr, 0, get_gdt().address, get_gdt().size, 0);
+	vmcb_set_seg(&save->idtr, 0, get_idt().address, get_idt().size, 0);
+
+	ctrl->asid = 1;
+	save->cpl = 0;
+	save->efer = rdmsr(MSR_EFER);
+	asm volatile ("mov %%cr4, %0" : "=r"(save->cr4) : : "memory");
+	asm volatile ("mov %%cr3, %0" : "=r"(save->cr3) : : "memory");
+	asm volatile ("mov %%cr0, %0" : "=r"(save->cr0) : : "memory");
+	asm volatile ("mov %%dr7, %0" : "=r"(save->dr7) : : "memory");
+	asm volatile ("mov %%dr6, %0" : "=r"(save->dr6) : : "memory");
+	asm volatile ("mov %%cr2, %0" : "=r"(save->cr2) : : "memory");
+	save->g_pat = rdmsr(MSR_IA32_CR_PAT);
+	save->dbgctl = rdmsr(MSR_IA32_DEBUGCTLMSR);
+	ctrl->intercept = (1ULL << INTERCEPT_VMRUN) |
+				(1ULL << INTERCEPT_VMMCALL);
+	ctrl->msrpm_base_pa = svm->msr_gpa;
+
+	vmcb->save.rip = (u64)guest_rip;
+	vmcb->save.rsp = (u64)guest_rsp;
+	guest_regs.rdi = (u64)svm;
+}
+
+/*
+ * save/restore 64-bit general registers except rax, rip, rsp
+ * which are directly handed through the VMCB guest processor state
+ */
+#define SAVE_GPR_C				\
+	"xchg %%rbx, guest_regs+0x20\n\t"	\
+	"xchg %%rcx, guest_regs+0x10\n\t"	\
+	"xchg %%rdx, guest_regs+0x18\n\t"	\
+	"xchg %%rbp, guest_regs+0x30\n\t"	\
+	"xchg %%rsi, guest_regs+0x38\n\t"	\
+	"xchg %%rdi, guest_regs+0x40\n\t"	\
+	"xchg %%r8,  guest_regs+0x48\n\t"	\
+	"xchg %%r9,  guest_regs+0x50\n\t"	\
+	"xchg %%r10, guest_regs+0x58\n\t"	\
+	"xchg %%r11, guest_regs+0x60\n\t"	\
+	"xchg %%r12, guest_regs+0x68\n\t"	\
+	"xchg %%r13, guest_regs+0x70\n\t"	\
+	"xchg %%r14, guest_regs+0x78\n\t"	\
+	"xchg %%r15, guest_regs+0x80\n\t"
+
+#define LOAD_GPR_C      SAVE_GPR_C
+
+/*
+ * selftests do not use interrupts so we dropped clgi/sti/cli/stgi
+ * for now. registers involved in LOAD/SAVE_GPR_C are eventually
+ * unmodified so they do not need to be in the clobber list.
+ */
+void run_guest(struct vmcb *vmcb, uint64_t vmcb_gpa)
+{
+	asm volatile (
+		"vmload %[vmcb_gpa]\n\t"
+		"mov rflags, %%r15\n\t"	// rflags
+		"mov %%r15, 0x170(%[vmcb])\n\t"
+		"mov guest_regs, %%r15\n\t"	// rax
+		"mov %%r15, 0x1f8(%[vmcb])\n\t"
+		LOAD_GPR_C
+		"vmrun %[vmcb_gpa]\n\t"
+		SAVE_GPR_C
+		"mov 0x170(%[vmcb]), %%r15\n\t"	// rflags
+		"mov %%r15, rflags\n\t"
+		"mov 0x1f8(%[vmcb]), %%r15\n\t"	// rax
+		"mov %%r15, guest_regs\n\t"
+		"vmsave %[vmcb_gpa]\n\t"
+		: : [vmcb] "r" (vmcb), [vmcb_gpa] "a" (vmcb_gpa)
+		: "r15", "memory");
+}
+
+/*
+ * Open SEV_DEV_PATH if available, otherwise exit the entire program.
+ *
+ * Return:
+ *   The opened file descriptor of /dev/sev.
+ */
+int open_sev_dev_path_or_exit(void)
+{
+	return open_path_or_exit(SEV_DEV_PATH, 0);
+}