Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 182 insertions, 0 deletions

diff --git a/tools/testing/selftests/kvm/memslot_modification_stress_test.c b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
new file mode 100644
index 000000000..9855c41ca
--- /dev/null
+++ b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KVM memslot modification stress test
+ * Adapted from demand_paging_test.c
+ *
+ * Copyright (C) 2018, Red Hat, Inc.
+ * Copyright (C) 2020, Google, Inc.
+ */
+
+#define _GNU_SOURCE /* for program_invocation_name */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <asm/unistd.h>
+#include <time.h>
+#include <poll.h>
+#include <pthread.h>
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/userfaultfd.h>
+
+#include "memstress.h"
+#include "processor.h"
+#include "test_util.h"
+#include "guest_modes.h"
+
+#define DUMMY_MEMSLOT_INDEX 7
+
+#define DEFAULT_MEMSLOT_MODIFICATION_ITERATIONS 10
+
+
+static int nr_vcpus = 1;
+static uint64_t guest_percpu_mem_size = DEFAULT_PER_VCPU_MEM_SIZE;
+
+static void vcpu_worker(struct memstress_vcpu_args *vcpu_args)
+{
+	struct kvm_vcpu *vcpu = vcpu_args->vcpu;
+	struct kvm_run *run;
+	int ret;
+
+	run = vcpu->run;
+
+	/* Let the guest access its memory until a stop signal is received */
+	while (!READ_ONCE(memstress_args.stop_vcpus)) {
+		ret = _vcpu_run(vcpu);
+		TEST_ASSERT(ret == 0, "vcpu_run failed: %d\n", ret);
+
+		if (get_ucall(vcpu, NULL) == UCALL_SYNC)
+			continue;
+
+		TEST_ASSERT(false,
+			    "Invalid guest sync status: exit_reason=%s\n",
+			    exit_reason_str(run->exit_reason));
+	}
+}
+
+struct memslot_antagonist_args {
+	struct kvm_vm *vm;
+	useconds_t delay;
+	uint64_t nr_modifications;
+};
+
+static void add_remove_memslot(struct kvm_vm *vm, useconds_t delay,
+			       uint64_t nr_modifications)
+{
+	uint64_t pages = max_t(int, vm->page_size, getpagesize()) / vm->page_size;
+	uint64_t gpa;
+	int i;
+
+	/*
+	 * Add the dummy memslot just below the memstress memslot, which is
+	 * at the top of the guest physical address space.
+	 */
+	gpa = memstress_args.gpa - pages * vm->page_size;
+
+	for (i = 0; i < nr_modifications; i++) {
+		usleep(delay);
+		vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, gpa,
+					    DUMMY_MEMSLOT_INDEX, pages, 0);
+
+		vm_mem_region_delete(vm, DUMMY_MEMSLOT_INDEX);
+	}
+}
+
+struct test_params {
+	useconds_t delay;
+	uint64_t nr_iterations;
+	bool partition_vcpu_memory_access;
+};
+
+static void run_test(enum vm_guest_mode mode, void *arg)
+{
+	struct test_params *p = arg;
+	struct kvm_vm *vm;
+
+	vm = memstress_create_vm(mode, nr_vcpus, guest_percpu_mem_size, 1,
+				 VM_MEM_SRC_ANONYMOUS,
+				 p->partition_vcpu_memory_access);
+
+	pr_info("Finished creating vCPUs\n");
+
+	memstress_start_vcpu_threads(nr_vcpus, vcpu_worker);
+
+	pr_info("Started all vCPUs\n");
+
+	add_remove_memslot(vm, p->delay, p->nr_iterations);
+
+	memstress_join_vcpu_threads(nr_vcpus);
+	pr_info("All vCPU threads joined\n");
+
+	memstress_destroy_vm(vm);
+}
+
+static void help(char *name)
+{
+	puts("");
+	printf("usage: %s [-h] [-m mode] [-d delay_usec]\n"
+	       "          [-b memory] [-v vcpus] [-o] [-i iterations]\n", name);
+	guest_modes_help();
+	printf(" -d: add a delay between each iteration of adding and\n"
+	       "     deleting a memslot in usec.\n");
+	printf(" -b: specify the size of the memory region which should be\n"
+	       "     accessed by each vCPU. e.g. 10M or 3G.\n"
+	       "     Default: 1G\n");
+	printf(" -v: specify the number of vCPUs to run.\n");
+	printf(" -o: Overlap guest memory accesses instead of partitioning\n"
+	       "     them into a separate region of memory for each vCPU.\n");
+	printf(" -i: specify the number of iterations of adding and removing\n"
+	       "     a memslot.\n"
+	       "     Default: %d\n", DEFAULT_MEMSLOT_MODIFICATION_ITERATIONS);
+	puts("");
+	exit(0);
+}
+
+int main(int argc, char *argv[])
+{
+	int max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS);
+	int opt;
+	struct test_params p = {
+		.delay = 0,
+		.nr_iterations = DEFAULT_MEMSLOT_MODIFICATION_ITERATIONS,
+		.partition_vcpu_memory_access = true
+	};
+
+	guest_modes_append_default();
+
+	while ((opt = getopt(argc, argv, "hm:d:b:v:oi:")) != -1) {
+		switch (opt) {
+		case 'm':
+			guest_modes_cmdline(optarg);
+			break;
+		case 'd':
+			p.delay = atoi_non_negative("Delay", optarg);
+			break;
+		case 'b':
+			guest_percpu_mem_size = parse_size(optarg);
+			break;
+		case 'v':
+			nr_vcpus = atoi_positive("Number of vCPUs", optarg);
+			TEST_ASSERT(nr_vcpus <= max_vcpus,
+				    "Invalid number of vcpus, must be between 1 and %d",
+				    max_vcpus);
+			break;
+		case 'o':
+			p.partition_vcpu_memory_access = false;
+			break;
+		case 'i':
+			p.nr_iterations = atoi_positive("Number of iterations", optarg);
+			break;
+		case 'h':
+		default:
+			help(argv[0]);
+			break;
+		}
+	}
+
+	for_each_guest_mode(run_test, &p);
+
+	return 0;
+}