Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/tools/testing/selftests/kvm/x86_64/sync_regs_test.c b/tools/testing/selftests/kvm/x86_64/sync_regs_test.c
new file mode 100644
index 000000000..d2f9b5bdf
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86_64/sync_regs_test.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test for x86 KVM_CAP_SYNC_REGS
+ *
+ * Copyright (C) 2018, Google LLC.
+ *
+ * Verifies expected behavior of x86 KVM_CAP_SYNC_REGS functionality,
+ * including requesting an invalid register set, updates to/from values
+ * in kvm_run.s.regs when kvm_valid_regs and kvm_dirty_regs are toggled.
+ */
+
+#define _GNU_SOURCE /* for program_invocation_short_name */
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#define UCALL_PIO_PORT ((uint16_t)0x1000)
+
+struct ucall uc_none = {
+	.cmd = UCALL_NONE,
+};
+
+/*
+ * ucall is embedded here to protect against compiler reshuffling registers
+ * before calling a function. In this test we only need to get KVM_EXIT_IO
+ * vmexit and preserve RBX, no additional information is needed.
+ */
+void guest_code(void)
+{
+	asm volatile("1: in %[port], %%al\n"
+		     "add $0x1, %%rbx\n"
+		     "jmp 1b"
+		     : : [port] "d" (UCALL_PIO_PORT), "D" (&uc_none)
+		     : "rax", "rbx");
+}
+
+static void compare_regs(struct kvm_regs *left, struct kvm_regs *right)
+{
+#define REG_COMPARE(reg) \
+	TEST_ASSERT(left->reg == right->reg, \
+		    "Register " #reg \
+		    " values did not match: 0x%llx, 0x%llx\n", \
+		    left->reg, right->reg)
+	REG_COMPARE(rax);
+	REG_COMPARE(rbx);
+	REG_COMPARE(rcx);
+	REG_COMPARE(rdx);
+	REG_COMPARE(rsi);
+	REG_COMPARE(rdi);
+	REG_COMPARE(rsp);
+	REG_COMPARE(rbp);
+	REG_COMPARE(r8);
+	REG_COMPARE(r9);
+	REG_COMPARE(r10);
+	REG_COMPARE(r11);
+	REG_COMPARE(r12);
+	REG_COMPARE(r13);
+	REG_COMPARE(r14);
+	REG_COMPARE(r15);
+	REG_COMPARE(rip);
+	REG_COMPARE(rflags);
+#undef REG_COMPARE
+}
+
+static void compare_sregs(struct kvm_sregs *left, struct kvm_sregs *right)
+{
+}
+
+static void compare_vcpu_events(struct kvm_vcpu_events *left,
+				struct kvm_vcpu_events *right)
+{
+}
+
+#define TEST_SYNC_FIELDS   (KVM_SYNC_X86_REGS|KVM_SYNC_X86_SREGS|KVM_SYNC_X86_EVENTS)
+#define INVALID_SYNC_FIELD 0x80000000
+
+int main(int argc, char *argv[])
+{
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	struct kvm_run *run;
+	struct kvm_regs regs;
+	struct kvm_sregs sregs;
+	struct kvm_vcpu_events events;
+	int rv, cap;
+
+	cap = kvm_check_cap(KVM_CAP_SYNC_REGS);
+	TEST_REQUIRE((cap & TEST_SYNC_FIELDS) == TEST_SYNC_FIELDS);
+	TEST_REQUIRE(!(cap & INVALID_SYNC_FIELD));
+
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+
+	run = vcpu->run;
+
+	/* Request reading invalid register set from VCPU. */
+	run->kvm_valid_regs = INVALID_SYNC_FIELD;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(rv < 0 && errno == EINVAL,
+		    "Invalid kvm_valid_regs did not cause expected KVM_RUN error: %d\n",
+		    rv);
+	run->kvm_valid_regs = 0;
+
+	run->kvm_valid_regs = INVALID_SYNC_FIELD | TEST_SYNC_FIELDS;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(rv < 0 && errno == EINVAL,
+		    "Invalid kvm_valid_regs did not cause expected KVM_RUN error: %d\n",
+		    rv);
+	run->kvm_valid_regs = 0;
+
+	/* Request setting invalid register set into VCPU. */
+	run->kvm_dirty_regs = INVALID_SYNC_FIELD;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(rv < 0 && errno == EINVAL,
+		    "Invalid kvm_dirty_regs did not cause expected KVM_RUN error: %d\n",
+		    rv);
+	run->kvm_dirty_regs = 0;
+
+	run->kvm_dirty_regs = INVALID_SYNC_FIELD | TEST_SYNC_FIELDS;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(rv < 0 && errno == EINVAL,
+		    "Invalid kvm_dirty_regs did not cause expected KVM_RUN error: %d\n",
+		    rv);
+	run->kvm_dirty_regs = 0;
+
+	/* Request and verify all valid register sets. */
+	/* TODO: BUILD TIME CHECK: TEST_ASSERT(KVM_SYNC_X86_NUM_FIELDS != 3); */
+	run->kvm_valid_regs = TEST_SYNC_FIELDS;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
+		    "Unexpected exit reason: %u (%s),\n",
+		    run->exit_reason,
+		    exit_reason_str(run->exit_reason));
+
+	vcpu_regs_get(vcpu, &regs);
+	compare_regs(&regs, &run->s.regs.regs);
+
+	vcpu_sregs_get(vcpu, &sregs);
+	compare_sregs(&sregs, &run->s.regs.sregs);
+
+	vcpu_events_get(vcpu, &events);
+	compare_vcpu_events(&events, &run->s.regs.events);
+
+	/* Set and verify various register values. */
+	run->s.regs.regs.rbx = 0xBAD1DEA;
+	run->s.regs.sregs.apic_base = 1 << 11;
+	/* TODO run->s.regs.events.XYZ = ABC; */
+
+	run->kvm_valid_regs = TEST_SYNC_FIELDS;
+	run->kvm_dirty_regs = KVM_SYNC_X86_REGS | KVM_SYNC_X86_SREGS;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
+		    "Unexpected exit reason: %u (%s),\n",
+		    run->exit_reason,
+		    exit_reason_str(run->exit_reason));
+	TEST_ASSERT(run->s.regs.regs.rbx == 0xBAD1DEA + 1,
+		    "rbx sync regs value incorrect 0x%llx.",
+		    run->s.regs.regs.rbx);
+	TEST_ASSERT(run->s.regs.sregs.apic_base == 1 << 11,
+		    "apic_base sync regs value incorrect 0x%llx.",
+		    run->s.regs.sregs.apic_base);
+
+	vcpu_regs_get(vcpu, &regs);
+	compare_regs(&regs, &run->s.regs.regs);
+
+	vcpu_sregs_get(vcpu, &sregs);
+	compare_sregs(&sregs, &run->s.regs.sregs);
+
+	vcpu_events_get(vcpu, &events);
+	compare_vcpu_events(&events, &run->s.regs.events);
+
+	/* Clear kvm_dirty_regs bits, verify new s.regs values are
+	 * overwritten with existing guest values.
+	 */
+	run->kvm_valid_regs = TEST_SYNC_FIELDS;
+	run->kvm_dirty_regs = 0;
+	run->s.regs.regs.rbx = 0xDEADBEEF;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
+		    "Unexpected exit reason: %u (%s),\n",
+		    run->exit_reason,
+		    exit_reason_str(run->exit_reason));
+	TEST_ASSERT(run->s.regs.regs.rbx != 0xDEADBEEF,
+		    "rbx sync regs value incorrect 0x%llx.",
+		    run->s.regs.regs.rbx);
+
+	/* Clear kvm_valid_regs bits and kvm_dirty_bits.
+	 * Verify s.regs values are not overwritten with existing guest values
+	 * and that guest values are not overwritten with kvm_sync_regs values.
+	 */
+	run->kvm_valid_regs = 0;
+	run->kvm_dirty_regs = 0;
+	run->s.regs.regs.rbx = 0xAAAA;
+	regs.rbx = 0xBAC0;
+	vcpu_regs_set(vcpu, &regs);
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
+		    "Unexpected exit reason: %u (%s),\n",
+		    run->exit_reason,
+		    exit_reason_str(run->exit_reason));
+	TEST_ASSERT(run->s.regs.regs.rbx == 0xAAAA,
+		    "rbx sync regs value incorrect 0x%llx.",
+		    run->s.regs.regs.rbx);
+	vcpu_regs_get(vcpu, &regs);
+	TEST_ASSERT(regs.rbx == 0xBAC0 + 1,
+		    "rbx guest value incorrect 0x%llx.",
+		    regs.rbx);
+
+	/* Clear kvm_valid_regs bits. Verify s.regs values are not overwritten
+	 * with existing guest values but that guest values are overwritten
+	 * with kvm_sync_regs values.
+	 */
+	run->kvm_valid_regs = 0;
+	run->kvm_dirty_regs = TEST_SYNC_FIELDS;
+	run->s.regs.regs.rbx = 0xBBBB;
+	rv = _vcpu_run(vcpu);
+	TEST_ASSERT(run->exit_reason == KVM_EXIT_IO,
+		    "Unexpected exit reason: %u (%s),\n",
+		    run->exit_reason,
+		    exit_reason_str(run->exit_reason));
+	TEST_ASSERT(run->s.regs.regs.rbx == 0xBBBB,
+		    "rbx sync regs value incorrect 0x%llx.",
+		    run->s.regs.regs.rbx);
+	vcpu_regs_get(vcpu, &regs);
+	TEST_ASSERT(regs.rbx == 0xBBBB + 1,
+		    "rbx guest value incorrect 0x%llx.",
+		    regs.rbx);
+
+	kvm_vm_free(vm);
+
+	return 0;
+}