Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1215 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
new file mode 100755
index 000000000..ae3f9462a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
@@ -0,0 +1,1215 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# | + $h1.10              |                          | + $h2.10               |
+# | | 192.0.2.1/28        |                          | | 192.0.2.2/28         |
+# | | 2001:db8:1::1/64    |                          | | 2001:db8:1::2/64     |
+# | |                     |                          | |                      |
+# | |  + $h1.20           |                          | |  + $h2.20            |
+# | \  | 198.51.100.1/24  |                          | \  | 198.51.100.2/24   |
+# |  \ | 2001:db8:2::1/64 |                          |  \ | 2001:db8:2::2/64  |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR0 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | +-----------------------------------------------------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	cfg_test
+	fwd_test
+	ctrl_test
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	simple_if_fini $h2
+}
+
+switch_create()
+{
+	ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 1 mcast_igmp_version 3 mcast_mld_version 2
+	bridge vlan add vid 10 dev br0 self
+	bridge vlan add vid 20 dev br0 self
+	ip link set dev br0 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br0
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	tc qdisc add dev br0 clsact
+	tc qdisc add dev $h2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	tc qdisc del dev br0 clsact
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev br0 down
+	bridge vlan del vid 20 dev br0 self
+	bridge vlan del vid 10 dev br0 self
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+cfg_test_host_common()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local src=$1; shift
+	local state=$1; shift
+	local invalid_state=$1; shift
+
+	RET=0
+
+	# Check basic add, replace and delete behavior.
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp"
+	check_err $? "Failed to add $name host entry"
+
+	bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null
+	check_fail $? "Managed to replace $name host entry"
+
+	bridge mdb del dev br0 port br0 grp $grp $state vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp"
+	check_fail $? "Failed to delete $name host entry"
+
+	# Check error cases.
+	bridge mdb add dev br0 port br0 grp $grp $invalid_state vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name host entry with a $invalid_state state"
+
+	bridge mdb add dev br0 port br0 grp $grp src $src $state vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name host entry with a source"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		filter_mode exclude &> /dev/null
+	check_fail $? "Managed to add $name host entry with a filter mode"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		source_list $src &> /dev/null
+	check_fail $? "Managed to add $name host entry with a source list"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		proto 123 &> /dev/null
+	check_fail $? "Managed to add $name host entry with a protocol"
+
+	log_test "Common host entries configuration tests ($name)"
+}
+
+# Check configuration of host entries from all types.
+cfg_test_host()
+{
+	echo
+	log_info "# Host entries configuration tests"
+
+	cfg_test_host_common "IPv4" "239.1.1.1" "192.0.2.1" "temp" "permanent"
+	cfg_test_host_common "IPv6" "ff0e::1" "2001:db8:1::1" "temp" "permanent"
+	cfg_test_host_common "L2" "01:02:03:04:05:06" "00:00:00:00:00:01" \
+		"permanent" "temp"
+}
+
+cfg_test_port_common()
+{
+	local name=$1;shift
+	local grp_key=$1; shift
+
+	RET=0
+
+	# Check basic add, replace and delete behavior.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_err $? "Failed to add $name entry"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
+		&> /dev/null
+	check_err $? "Failed to replace $name entry"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_fail $? "Failed to delete $name entry"
+
+	# Check default protocol and replacement.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "static"
+	check_err $? "$name entry not added with default \"static\" protocol"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
+		proto 123
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "123"
+	check_err $? "Failed to replace protocol of $name entry"
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+
+	# Check behavior when VLAN is not specified.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_err $? "$name entry with VLAN 10 not added when VLAN was not specified"
+	bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+	check_err $? "$name entry with VLAN 20 not added when VLAN was not specified"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified"
+	bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+	check_fail $? "$name entry with VLAN 20 not deleted when VLAN was not specified"
+
+	# Check behavior when bridge port is down.
+	ip link set dev $swp1 down
+
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	check_err $? "Failed to add $name permanent entry when bridge port is down"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+
+	bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 &> /dev/null
+	check_fail $? "Managed to add $name temporary entry when bridge port is down"
+
+	ip link set dev $swp1 up
+	setup_wait_dev $swp1
+
+	# Check error cases.
+	ip link set dev br0 down
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name entry when bridge is down"
+	ip link set dev br0 up
+
+	ip link set dev br0 type bridge mcast_snooping 0
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid \
+		10 &> /dev/null
+	check_fail $? "Managed to add $name entry when multicast snooping is disabled"
+	ip link set dev br0 type bridge mcast_snooping 1
+
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 5000 \
+		&> /dev/null
+	check_fail $? "Managed to add $name entry with an invalid VLAN"
+
+	log_test "Common port group entries configuration tests ($name)"
+}
+
+src_list_create()
+{
+	local src_prefix=$1; shift
+	local num_srcs=$1; shift
+	local src_list
+	local i
+
+	for i in $(seq 1 $num_srcs); do
+		src_list=${src_list},${src_prefix}${i}
+	done
+
+	echo $src_list | cut -c 2-
+}
+
+__cfg_test_port_ip_star_g()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local invalid_grp=$1; shift
+	local src_prefix=$1; shift
+	local src1=${src_prefix}1
+	local src2=${src_prefix}2
+	local src3=${src_prefix}3
+	local max_srcs=31
+	local num_srcs
+
+	RET=0
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "exclude"
+	check_err $? "Default filter mode is not \"exclude\""
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check basic add and delete behavior.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+	check_err $? "(*, G) entry not created"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry not created"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+	check_fail $? "(*, G) entry not deleted"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_fail $? "(S, G) entry not deleted"
+
+	## State (permanent / temp) tests.
+
+	# Check that group and source timer are not set for permanent entries.
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "permanent"
+	check_err $? "(*, G) entry not added as \"permanent\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "permanent"
+	check_err $? "(S, G) entry not added as \"permanent\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_err $? "(*, G) \"permanent\" entry has a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_err $? "\"permanent\" source entry has a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is set for temporary (*, G) EXCLUDE, but not
+	# the source timer.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) EXCLUDE entry not added as \"temp\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) \"blocked\" entry not added as \"temp\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_err $? "\"blocked\" source entry has a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is not set for temporary (*, G) INCLUDE, but
+	# that the source timer is set.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) INCLUDE entry not added as \"temp\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) entry not added as \"temp\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_err $? "(*, G) INCLUDE entry has a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_fail $? "Source entry does not have a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is never set for (S, G) entries.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q " 0.00"
+	check_err $? "(S, G) entry has a pending group timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Filter mode (include / exclude) tests.
+
+	# Check that (*, G) INCLUDE entries are added with correct filter mode
+	# and that (S, G) entries are not marked as "blocked".
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "include"
+	check_err $? "(*, G) INCLUDE not added with \"include\" filter mode"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_fail $? "(S, G) entry marked as \"blocked\" when should not"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that (*, G) EXCLUDE entries are added with correct filter mode
+	# and that (S, G) entries are marked as "blocked".
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "exclude"
+	check_err $? "(*, G) EXCLUDE not added with \"exclude\" filter mode"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_err $? "(S, G) entry not marked as \"blocked\" when should"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Protocol tests.
+
+	# Check that (*, G) and (S, G) entries are added with the specified
+	# protocol.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode exclude source_list $src1 proto zebra
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "zebra"
+	check_err $? "(*, G) entry not added with \"zebra\" protocol"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "zebra"
+	check_err $? "(S, G) entry not marked added with \"zebra\" protocol"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Replace tests.
+
+	# Check that state can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "permanent"
+	check_err $? "(*, G) entry not marked as \"permanent\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "permanent"
+	check_err $? "(S, G) entry not marked as \"permanent\" after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) entry not marked as \"temp\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) entry not marked as \"temp\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that filter mode can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "include"
+	check_err $? "(*, G) not marked with \"include\" filter mode after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_fail $? "(S, G) marked as \"blocked\" after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "exclude"
+	check_err $? "(*, G) not marked with \"exclude\" filter mode after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_err $? "(S, G) not marked as \"blocked\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that sources can be added to and removed from the source list.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1,$src2,$src3
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry for source $src1 not created after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+	check_err $? "(S, G) entry for source $src2 not created after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+	check_err $? "(S, G) entry for source $src3 not created after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1,$src3
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry for source $src1 not created after second replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+	check_fail $? "(S, G) entry for source $src2 created after second replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+	check_err $? "(S, G) entry for source $src3 not created after second replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that protocol can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1 proto zebra
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1 proto bgp
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "bgp"
+	check_err $? "(*, G) protocol not changed to \"bgp\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "bgp"
+	check_err $? "(S, G) protocol not changed to \"bgp\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Star exclude tests.
+
+	# Check star exclude functionality. When adding a new EXCLUDE (*, G),
+	# it needs to be also added to all (S, G) entries for proper
+	# replication.
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode include source_list $src1
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$swp1" | grep "$grp" | \
+		grep "$src1" | grep -q "added_by_star_ex"
+	check_err $? "\"added_by_star_ex\" entry not created after adding (*, G) entry"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+	bridge mdb del dev br0 port $swp2 grp $grp src $src1 vid 10
+
+	## Error cases tests.
+
+	bridge mdb add dev br0 port $swp1 grp $invalid_grp vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid group"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		&> /dev/null
+	check_fail $? "Managed to add an INCLUDE entry with an empty source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $grp &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid source in source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		source_list $src &> /dev/null
+	check_fail $? "Managed to add an entry with a source list and no filter mode"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $src1
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $src1 &> /dev/null
+	check_fail $? "Managed to replace an entry without using replace"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	bridge mdb add dev br0 port $swp1 grp $grp src $src2 vid 10
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $src1,$src2,$src3 &> /dev/null
+	check_fail $? "Managed to add a source that already has a forwarding entry"
+	bridge mdb del dev br0 port $swp1 grp $grp src $src2 vid 10
+
+	# Check maximum number of sources.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $(src_list_create $src_prefix $max_srcs)
+	num_srcs=$(bridge -d mdb show dev br0 vid 10 | grep "$grp" | \
+		grep "src" | wc -l)
+	[[ $num_srcs -eq $max_srcs ]]
+	check_err $? "Failed to configure maximum number of sources ($max_srcs)"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $(src_list_create $src_prefix $((max_srcs + 1))) \
+		&> /dev/null
+	check_fail $? "Managed to exceed maximum number of sources ($max_srcs)"
+
+	log_test "$name (*, G) port group entries configuration tests"
+}
+
+cfg_test_port_ip_star_g()
+{
+	echo
+	log_info "# Port group entries configuration tests - (*, G)"
+
+	cfg_test_port_common "IPv4 (*, G)" "grp 239.1.1.1"
+	cfg_test_port_common "IPv6 (*, G)" "grp ff0e::1"
+	__cfg_test_port_ip_star_g "IPv4" "239.1.1.1" "224.0.0.1" "192.0.2."
+	__cfg_test_port_ip_star_g "IPv6" "ff0e::1" "ff02::1" "2001:db8:1::"
+}
+
+__cfg_test_port_ip_sg()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local src=$1; shift
+	local grp_key="grp $grp src $src"
+
+	RET=0
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "include"
+	check_err $? "Default filter mode is not \"include\""
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check that entries can be added as both permanent and temp and that
+	# group timer is set correctly.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "permanent"
+	check_err $? "Entry not added as \"permanent\" when should"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "0.00"
+	check_err $? "\"permanent\" entry has a pending group timer"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	bridge mdb add dev br0 port $swp1 $grp_key temp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "temp"
+	check_err $? "Entry not added as \"temp\" when should"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "0.00"
+	check_fail $? "\"temp\" entry has an unpending group timer"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check error cases.
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 \
+		filter_mode include &> /dev/null
+	check_fail $? "Managed to add an entry with a filter mode"
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 \
+		filter_mode include source_list $src &> /dev/null
+	check_fail $? "Managed to add an entry with a source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp src $grp vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid source"
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 temp
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 permanent &> /dev/null
+	check_fail $? "Managed to replace an entry without using replace"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check that we can replace available attributes.
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 proto 123
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 proto 111
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "111"
+	check_err $? "Failed to replace protocol"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 permanent
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "permanent"
+	check_err $? "Entry not marked as \"permanent\" after replace"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "0.00"
+	check_err $? "Entry has a pending group timer after replace"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 temp
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "temp"
+	check_err $? "Entry not marked as \"temp\" after replace"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "0.00"
+	check_fail $? "Entry has an unpending group timer after replace"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check star exclude functionality. When adding a (S, G), all matching
+	# (*, G) ports need to be added to it.
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10
+	bridge mdb show dev br0 vid 10 | grep "$grp_key" | grep $swp2 | \
+		grep -q "added_by_star_ex"
+	check_err $? "\"added_by_star_ex\" entry not created after adding (S, G) entry"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	log_test "$name (S, G) port group entries configuration tests"
+}
+
+cfg_test_port_ip_sg()
+{
+	echo
+	log_info "# Port group entries configuration tests - (S, G)"
+
+	cfg_test_port_common "IPv4 (S, G)" "grp 239.1.1.1 src 192.0.2.1"
+	cfg_test_port_common "IPv6 (S, G)" "grp ff0e::1 src 2001:db8:1::1"
+	__cfg_test_port_ip_sg "IPv4" "239.1.1.1" "192.0.2.1"
+	__cfg_test_port_ip_sg "IPv6" "ff0e::1" "2001:db8:1::1"
+}
+
+cfg_test_port_ip()
+{
+	cfg_test_port_ip_star_g
+	cfg_test_port_ip_sg
+}
+
+__cfg_test_port_l2()
+{
+	local grp="01:02:03:04:05:06"
+
+	RET=0
+
+	bridge meb add dev br0 port $swp grp 00:01:02:03:04:05 \
+		permanent vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with unicast MAC"
+
+	bridge mdb add dev br0 port $swp grp $grp src 00:01:02:03:04:05 \
+		permanent vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with a source"
+
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode include &> /dev/null
+	check_fail $? "Managed to add an entry with a filter mode"
+
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		source_list 00:01:02:03:04:05 &> /dev/null
+	check_fail $? "Managed to add an entry with a source list"
+
+	log_test "L2 (*, G) port group entries configuration tests"
+}
+
+cfg_test_port_l2()
+{
+	echo
+	log_info "# Port group entries configuration tests - L2"
+
+	cfg_test_port_common "L2 (*, G)" "grp 01:02:03:04:05:06"
+	__cfg_test_port_l2
+}
+
+# Check configuration of regular (port) entries of all types.
+cfg_test_port()
+{
+	cfg_test_port_ip
+	cfg_test_port_l2
+}
+
+ipv4_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "239.1.1.$i"
+	done
+}
+
+ipv6_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "ff0e::$(printf %x $i)"
+	done
+}
+
+l2_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "01:00:00:00:00:$(printf %02x $i)"
+	done
+}
+
+cfg_test_dump_common()
+{
+	local name=$1; shift
+	local fn=$1; shift
+	local max_bridges=2
+	local max_grps=256
+	local max_ports=32
+	local num_entries
+	local batch_file
+	local grp
+	local i j
+
+	RET=0
+
+	# Create net devices.
+	for i in $(seq 1 $max_bridges); do
+		ip link add name br-test${i} up type bridge vlan_filtering 1 \
+			mcast_snooping 1
+		for j in $(seq 1 $max_ports); do
+			ip link add name br-test${i}-du${j} up \
+				master br-test${i} type dummy
+		done
+	done
+
+	# Create batch file with MDB entries.
+	batch_file=$(mktemp)
+	for i in $(seq 1 $max_bridges); do
+		for j in $(seq 1 $max_ports); do
+			for grp in $($fn $max_grps); do
+				echo "mdb add dev br-test${i} \
+					port br-test${i}-du${j} grp $grp \
+					permanent vid 1" >> $batch_file
+			done
+		done
+	done
+
+	# Program the batch file and check for expected number of entries.
+	bridge -b $batch_file
+	for i in $(seq 1 $max_bridges); do
+		num_entries=$(bridge mdb show dev br-test${i} | \
+			grep "permanent" | wc -l)
+		[[ $num_entries -eq $((max_grps * max_ports)) ]]
+		check_err $? "Wrong number of entries in br-test${i}"
+	done
+
+	# Cleanup.
+	rm $batch_file
+	for i in $(seq 1 $max_bridges); do
+		ip link del dev br-test${i}
+		for j in $(seq $max_ports); do
+			ip link del dev br-test${i}-du${j}
+		done
+	done
+
+	log_test "$name large scale dump tests"
+}
+
+# Check large scale dump.
+cfg_test_dump()
+{
+	echo
+	log_info "# Large scale dump tests"
+
+	cfg_test_dump_common "IPv4" ipv4_grps_get
+	cfg_test_dump_common "IPv6" ipv6_grps_get
+	cfg_test_dump_common "L2" l2_grps_get
+}
+
+cfg_test()
+{
+	cfg_test_host
+	cfg_test_port
+	cfg_test_dump
+}
+
+__fwd_test_host_ip()
+{
+	local grp=$1; shift
+	local src=$1; shift
+	local mode=$1; shift
+	local name
+	local eth_type
+
+	RET=0
+
+	if [[ $mode == "-4" ]]; then
+		name="IPv4"
+		eth_type="ipv4"
+	else
+		name="IPv6"
+		eth_type="ipv6"
+	fi
+
+	tc filter add dev br0 ingress protocol 802.1q pref 1 handle 1 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp src_ip $src \
+		action drop
+
+	# Packet should only be flooded to multicast router ports when there is
+	# no matching MDB entry. The bridge is not configured as a multicast
+	# router port.
+	$MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 0
+	check_err $? "Packet locally received after flood"
+
+	# Install a regular port group entry and expect the packet to not be
+	# locally received.
+	bridge mdb add dev br0 port $swp2 grp $grp temp vid 10
+	$MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 0
+	check_err $? "Packet locally received after installing a regular entry"
+
+	# Add a host entry and expect the packet to be locally received.
+	bridge mdb add dev br0 port br0 grp $grp temp vid 10
+	$MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet not locally received after adding a host entry"
+
+	# Remove the host entry and expect the packet to not be locally
+	# received.
+	bridge mdb del dev br0 port br0 grp $grp vid 10
+	$MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet locally received after removing a host entry"
+
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	tc filter del dev br0 ingress protocol 802.1q pref 1 handle 1 flower
+
+	log_test "$name host entries forwarding tests"
+}
+
+fwd_test_host_ip()
+{
+	__fwd_test_host_ip "239.1.1.1" "192.0.2.1" "-4"
+	__fwd_test_host_ip "ff0e::1" "2001:db8:1::1" "-6"
+}
+
+fwd_test_host_l2()
+{
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev br0 ingress protocol all pref 1 handle 1 flower \
+		dst_mac $dmac action drop
+
+	# Packet should be flooded and locally received when there is no
+	# matching MDB entry.
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet not locally received after flood"
+
+	# Install a regular port group entry and expect the packet to not be
+	# locally received.
+	bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet locally received after installing a regular entry"
+
+	# Add a host entry and expect the packet to be locally received.
+	bridge mdb add dev br0 port br0 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 2
+	check_err $? "Packet not locally received after adding a host entry"
+
+	# Remove the host entry and expect the packet to not be locally
+	# received.
+	bridge mdb del dev br0 port br0 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 2
+	check_err $? "Packet locally received after removing a host entry"
+
+	bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10
+
+	tc filter del dev br0 ingress protocol all pref 1 handle 1 flower
+
+	log_test "L2 host entries forwarding tests"
+}
+
+fwd_test_host()
+{
+	# Disable multicast router on the bridge to ensure that packets are
+	# only locally received when a matching host entry is present.
+	ip link set dev br0 type bridge mcast_router 0
+
+	fwd_test_host_ip
+	fwd_test_host_l2
+
+	ip link set dev br0 type bridge mcast_router 1
+}
+
+__fwd_test_port_ip()
+{
+	local grp=$1; shift
+	local valid_src=$1; shift
+	local invalid_src=$1; shift
+	local mode=$1; shift
+	local filter_mode=$1; shift
+	local name
+	local eth_type
+	local src_list
+
+	RET=0
+
+	if [[ $mode == "-4" ]]; then
+		name="IPv4"
+		eth_type="ipv4"
+	else
+		name="IPv6"
+		eth_type="ipv6"
+	fi
+
+	# The valid source is the one we expect to get packets from after
+	# adding the entry.
+	if [[ $filter_mode == "include" ]]; then
+		src_list=$valid_src
+	else
+		src_list=$invalid_src
+	fi
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 1 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \
+		src_ip $valid_src action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 2 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \
+		src_ip $invalid_src action drop
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Packet from valid source received on H2 before adding entry"
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 0
+	check_err $? "Packet from invalid source received on H2 before adding entry"
+
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode $filter_mode source_list $src_list
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet from valid source not received on H2 after adding entry"
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 0
+	check_err $? "Packet from invalid source received on H2 after adding entry"
+
+	bridge mdb replace dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode exclude
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 2
+	check_err $? "Packet from valid source not received on H2 after allowing all sources"
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 1
+	check_err $? "Packet from invalid source not received on H2 after allowing all sources"
+
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 2
+	check_err $? "Packet from valid source received on H2 after deleting entry"
+
+	$MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 1
+	check_err $? "Packet from invalid source received on H2 after deleting entry"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 2 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 1 flower
+
+	log_test "$name port group \"$filter_mode\" entries forwarding tests"
+}
+
+fwd_test_port_ip()
+{
+	__fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "exclude"
+	__fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \
+		"exclude"
+	__fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "include"
+	__fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \
+		"include"
+}
+
+fwd_test_port_l2()
+{
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol all pref 1 handle 1 flower \
+		dst_mac $dmac action drop
+
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Packet received on H2 before adding entry"
+
+	bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet not received on H2 after adding entry"
+
+	bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet received on H2 after deleting entry"
+
+	tc filter del dev $h2 ingress protocol all pref 1 handle 1 flower
+
+	log_test "L2 port entries forwarding tests"
+}
+
+fwd_test_port()
+{
+	# Disable multicast flooding to ensure that packets are only forwarded
+	# out of a port when a matching port group entry is present.
+	bridge link set dev $swp2 mcast_flood off
+
+	fwd_test_port_ip
+	fwd_test_port_l2
+
+	bridge link set dev $swp2 mcast_flood on
+}
+
+fwd_test()
+{
+	echo
+	log_info "# Forwarding tests"
+
+	# Forwarding according to MDB entries only takes place when the bridge
+	# detects that there is a valid querier in the network. Set the bridge
+	# as the querier and assign it a valid IPv6 link-local address to be
+	# used as the source address for MLD queries.
+	ip -6 address add fe80::1/64 nodad dev br0
+	ip link set dev br0 type bridge mcast_querier 1
+	# Wait the default Query Response Interval (10 seconds) for the bridge
+	# to determine that there are no other queriers in the network.
+	sleep 10
+
+	fwd_test_host
+	fwd_test_port
+
+	ip link set dev br0 type bridge mcast_querier 0
+	ip -6 address del fe80::1/64 dev br0
+}
+
+ctrl_igmpv3_is_in_test()
+{
+	RET=0
+
+	# Add a permanent entry and check that it is not affected by the
+	# received IGMP packet.
+	bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 \
+		filter_mode include source_list 192.0.2.1
+
+	# IS_IN ( 192.0.2.2 )
+	$MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \
+		-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -q 192.0.2.2
+	check_fail $? "Permanent entry affected by IGMP packet"
+
+	# Replace the permanent entry with a temporary one and check that after
+	# processing the IGMP packet, a new source is added to the list along
+	# with a new forwarding entry.
+	bridge mdb replace dev br0 port $swp1 grp 239.1.1.1 temp vid 10 \
+		filter_mode include source_list 192.0.2.1
+
+	# IS_IN ( 192.0.2.2 )
+	$MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \
+		-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -v "src" | \
+		grep -q 192.0.2.2
+	check_err $? "Source not add to source list"
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | \
+		grep -q "src 192.0.2.2"
+	check_err $? "(S, G) entry not created for new source"
+
+	bridge mdb del dev br0 port $swp1 grp 239.1.1.1 vid 10
+
+	log_test "IGMPv3 MODE_IS_INCLUDE tests"
+}
+
+ctrl_mldv2_is_in_test()
+{
+	RET=0
+
+	# Add a permanent entry and check that it is not affected by the
+	# received MLD packet.
+	bridge mdb add dev br0 port $swp1 grp ff0e::1 permanent vid 10 \
+		filter_mode include source_list 2001:db8:1::1
+
+	# IS_IN ( 2001:db8:1::2 )
+	local p=$(mldv2_is_in_get fe80::1 ff0e::1 2001:db8:1::2)
+	$MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \
+		-t ip hop=1,next=0,p="$p" -q
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
+		grep -q 2001:db8:1::2
+	check_fail $? "Permanent entry affected by MLD packet"
+
+	# Replace the permanent entry with a temporary one and check that after
+	# processing the MLD packet, a new source is added to the list along
+	# with a new forwarding entry.
+	bridge mdb replace dev br0 port $swp1 grp ff0e::1 temp vid 10 \
+		filter_mode include source_list 2001:db8:1::1
+
+	# IS_IN ( 2001:db8:1::2 )
+	$MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \
+		-t ip hop=1,next=0,p="$p" -q
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | grep -v "src" | \
+		grep -q 2001:db8:1::2
+	check_err $? "Source not add to source list"
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
+		grep -q "src 2001:db8:1::2"
+	check_err $? "(S, G) entry not created for new source"
+
+	bridge mdb del dev br0 port $swp1 grp ff0e::1 vid 10
+
+	log_test "MLDv2 MODE_IS_INCLUDE tests"
+}
+
+ctrl_test()
+{
+	echo
+	log_info "# Control packets tests"
+
+	ctrl_igmpv3_is_in_test
+	ctrl_mldv2_is_in_test
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS