Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 546 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh
new file mode 100755
index 000000000..72dfbeaf5
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh
@@ -0,0 +1,546 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="vlmc_control_test vlmc_querier_test vlmc_igmp_mld_version_test \
+	   vlmc_last_member_test vlmc_startup_query_test vlmc_membership_test \
+	   vlmc_querier_intvl_test vlmc_query_intvl_test vlmc_query_response_intvl_test \
+	   vlmc_router_port_test vlmc_filtering_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="239.10.10.10"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+	ip link add l $h1 $h1.10 up type vlan id 10
+}
+
+h1_destroy()
+{
+	ip link del $h1.10
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+	ip link add l $h2 $h2.10 up type vlan id 10
+}
+
+h2_destroy()
+{
+	ip link del $h2.10
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+
+	bridge vlan add vid 10-11 dev $swp1 master
+	bridge vlan add vid 10-11 dev $swp2 master
+
+	ip link set dev br0 type bridge mcast_vlan_snooping 1
+	check_err $? "Could not enable global vlan multicast snooping"
+	log_test "Vlan multicast snooping enable"
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlmc_v2join_test()
+{
+	local expect=$1
+
+	RET=0
+	ip address add dev $h2.10 $TEST_GROUP/32 autojoin
+	check_err $? "Could not join $TEST_GROUP"
+
+	sleep 5
+	bridge -j mdb show dev br0 |
+		jq -e ".[].mdb[] | select(.grp == \"$TEST_GROUP\" and .vid == 10)" &>/dev/null
+	if [ $expect -eq 0 ]; then
+		check_err $? "IGMPv2 report didn't create mdb entry for $TEST_GROUP"
+	else
+		check_fail $? "IGMPv2 report shouldn't have created mdb entry for $TEST_GROUP"
+	fi
+
+	# check if we need to cleanup
+	if [ $RET -eq 0 ]; then
+		ip address del dev $h2.10 $TEST_GROUP/32 2>&1 1>/dev/null
+		sleep 5
+		bridge -j mdb show dev br0 |
+			jq -e ".[].mdb[] | select(.grp == \"$TEST_GROUP\" and \
+						  .vid == 10)" &>/dev/null
+		check_fail $? "IGMPv2 leave didn't remove mdb entry for $TEST_GROUP"
+	fi
+}
+
+vlmc_control_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+	log_test "Vlan global options existence"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_snooping == 1) " &>/dev/null
+	check_err $? "Wrong default mcast_snooping global option value"
+	log_test "Vlan mcast_snooping global option default value"
+
+	RET=0
+	vlmc_v2join_test 0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 0
+	check_err $? "Could not disable multicast snooping in vlan 10"
+	vlmc_v2join_test 1
+	log_test "Vlan 10 multicast snooping control"
+}
+
+# setup for general query counting
+vlmc_query_cnt_xstats()
+{
+	local type=$1
+	local version=$2
+	local dev=$3
+
+	ip -j link xstats type bridge_slave dev $dev | \
+	jq -e ".[].multicast.${type}_queries.tx_v${version}"
+}
+
+vlmc_query_cnt_setup()
+{
+	local type=$1
+	local dev=$2
+
+	if [[ $type == "igmp" ]]; then
+		tc filter add dev $dev egress pref 10 prot 802.1Q \
+			flower vlan_id 10 vlan_ethtype ipv4 dst_ip 224.0.0.1 ip_proto 2 \
+			action pass
+	else
+		tc filter add dev $dev egress pref 10 prot 802.1Q \
+			flower vlan_id 10 vlan_ethtype ipv6 dst_ip ff02::1 ip_proto icmpv6 \
+			action pass
+	fi
+
+	ip link set dev br0 type bridge mcast_stats_enabled 1
+}
+
+vlmc_query_cnt_cleanup()
+{
+	local dev=$1
+
+	ip link set dev br0 type bridge mcast_stats_enabled 0
+	tc filter del dev $dev egress pref 10
+}
+
+vlmc_check_query()
+{
+	local type=$1
+	local version=$2
+	local dev=$3
+	local expect=$4
+	local time=$5
+	local ret=0
+
+	vlmc_query_cnt_setup $type $dev
+
+	local pre_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev)
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1
+	ret=$?
+	if [[ $ret -eq 0 ]]; then
+		sleep $time
+
+		local tcstats=$(tc_rule_stats_get $dev 10 egress)
+		local post_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev)
+
+		if [[ $tcstats != $expect || \
+		      $(($post_tx_xstats-$pre_tx_xstats)) != $expect || \
+		      $tcstats != $(($post_tx_xstats-$pre_tx_xstats)) ]]; then
+			ret=1
+		fi
+	fi
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 0
+	vlmc_query_cnt_cleanup $dev
+
+	return $ret
+}
+
+vlmc_querier_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_querier == 0) " &>/dev/null
+	check_err $? "Wrong default mcast_querier global vlan option value"
+	log_test "Vlan mcast_querier global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1
+	check_err $? "Could not enable querier in vlan 10"
+	log_test "Vlan 10 multicast querier enable"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 0
+
+	RET=0
+	vlmc_check_query igmp 2 $swp1 1 1
+	check_err $? "No vlan tagged IGMPv2 general query packets sent"
+	log_test "Vlan 10 tagged IGMPv2 general query sent"
+
+	RET=0
+	vlmc_check_query mld 1 $swp1 1 1
+	check_err $? "No vlan tagged MLD general query packets sent"
+	log_test "Vlan 10 tagged MLD general query sent"
+}
+
+vlmc_igmp_mld_version_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_igmp_version == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_igmp_version global vlan option value"
+	log_test "Vlan mcast_igmp_version global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_mld_version == 1) " &>/dev/null
+	check_err $? "Wrong default mcast_mld_version global vlan option value"
+	log_test "Vlan mcast_mld_version global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 3
+	check_err $? "Could not set mcast_igmp_version in vlan 10"
+	log_test "Vlan 10 mcast_igmp_version option changed to 3"
+
+	RET=0
+	vlmc_check_query igmp 3 $swp1 1 1
+	check_err $? "No vlan tagged IGMPv3 general query packets sent"
+	log_test "Vlan 10 tagged IGMPv3 general query sent"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 2
+	check_err $? "Could not set mcast_mld_version in vlan 10"
+	log_test "Vlan 10 mcast_mld_version option changed to 2"
+
+	RET=0
+	vlmc_check_query mld 2 $swp1 1 1
+	check_err $? "No vlan tagged MLDv2 general query packets sent"
+	log_test "Vlan 10 tagged MLDv2 general query sent"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 2
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 1
+}
+
+vlmc_last_member_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_last_member_count == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_last_member_count global vlan option value"
+	log_test "Vlan mcast_last_member_count global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_last_member_interval == 100) " &>/dev/null
+	check_err $? "Wrong default mcast_last_member_interval global vlan option value"
+	log_test "Vlan mcast_last_member_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_count 3
+	check_err $? "Could not set mcast_last_member_count in vlan 10"
+	log_test "Vlan 10 mcast_last_member_count option changed to 3"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_count 2
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_interval 200
+	check_err $? "Could not set mcast_last_member_interval in vlan 10"
+	log_test "Vlan 10 mcast_last_member_interval option changed to 200"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_interval 100
+}
+
+vlmc_startup_query_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_startup_query_interval == 3125) " &>/dev/null
+	check_err $? "Wrong default mcast_startup_query_interval global vlan option value"
+	log_test "Vlan mcast_startup_query_interval global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_startup_query_count == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_startup_query_count global vlan option value"
+	log_test "Vlan mcast_startup_query_count global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_interval 100
+	check_err $? "Could not set mcast_startup_query_interval in vlan 10"
+	vlmc_check_query igmp 2 $swp1 2 3
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_startup_query_interval option changed to 100"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 3
+	check_err $? "Could not set mcast_startup_query_count in vlan 10"
+	vlmc_check_query igmp 2 $swp1 3 4
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_startup_query_count option changed to 3"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_interval 3125
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2
+}
+
+vlmc_membership_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_membership_interval == 26000) " &>/dev/null
+	check_err $? "Wrong default mcast_membership_interval global vlan option value"
+	log_test "Vlan mcast_membership_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_membership_interval 200
+	check_err $? "Could not set mcast_membership_interval in vlan 10"
+	log_test "Vlan 10 mcast_membership_interval option changed to 200"
+
+	RET=0
+	vlmc_v2join_test 1
+	log_test "Vlan 10 mcast_membership_interval mdb entry expire"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_membership_interval 26000
+}
+
+vlmc_querier_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_querier_interval == 25500) " &>/dev/null
+	check_err $? "Wrong default mcast_querier_interval global vlan option value"
+	log_test "Vlan mcast_querier_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier_interval 100
+	check_err $? "Could not set mcast_querier_interval in vlan 10"
+	log_test "Vlan 10 mcast_querier_interval option changed to 100"
+
+	RET=0
+	ip link add dev br1 type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 \
+					mcast_vlan_snooping 1
+	bridge vlan add vid 10 dev br1 self pvid untagged
+	ip link set dev $h1 master br1
+	ip link set dev br1 up
+	bridge vlan add vid 10 dev $h1 master
+	bridge vlan global set vid 10 dev br1 mcast_snooping 1 mcast_querier 1
+	sleep 2
+	ip link del dev br1
+	ip addr replace 2001:db8:1::1/64 dev $h1
+	vlmc_check_query igmp 2 $swp1 1 1
+	check_err $? "Wrong number of IGMPv2 general queries after querier interval"
+	log_test "Vlan 10 mcast_querier_interval expire after outside query"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier_interval 25500
+}
+
+vlmc_query_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_query_interval == 12500) " &>/dev/null
+	check_err $? "Wrong default mcast_query_interval global vlan option value"
+	log_test "Vlan mcast_query_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 200
+	check_err $? "Could not set mcast_query_interval in vlan 10"
+	# 1 is sent immediately, then 2 more in the next 5 seconds
+	vlmc_check_query igmp 2 $swp1 3 5
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_query_interval option changed to 200"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 12500
+}
+
+vlmc_query_response_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_query_response_interval == 1000) " &>/dev/null
+	check_err $? "Wrong default mcast_query_response_interval global vlan option value"
+	log_test "Vlan mcast_query_response_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 200
+	check_err $? "Could not set mcast_query_response_interval in vlan 10"
+	log_test "Vlan 10 mcast_query_response_interval option changed to 200"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 1000
+}
+
+vlmc_router_port_test()
+{
+	RET=0
+	local goutput=`bridge -j -d vlan show`
+	echo -n $goutput |
+		jq -e ".[] | select(.ifname == \"$swp1\" and \
+				    .vlans[].vlan == 10)" &>/dev/null
+	check_err $? "Could not find port vlan 10's options"
+
+	echo -n $goutput |
+		jq -e ".[] | select(.ifname == \"$swp1\" and \
+				    .vlans[].vlan == 10 and \
+				    .vlans[].mcast_router == 1)" &>/dev/null
+	check_err $? "Wrong default port mcast_router option value"
+	log_test "Port vlan 10 option mcast_router default value"
+
+	RET=0
+	bridge vlan set vid 10 dev $swp1 mcast_router 2
+	check_err $? "Could not set port vlan 10's mcast_router option"
+	log_test "Port vlan 10 mcast_router option changed to 2"
+
+	RET=0
+	tc filter add dev $swp1 egress pref 10 prot 802.1Q \
+		flower vlan_id 10 vlan_ethtype ipv4 dst_ip 239.1.1.1 ip_proto udp action pass
+	tc filter add dev $swp2 egress pref 10 prot 802.1Q \
+		flower vlan_id 10 vlan_ethtype ipv4 dst_ip 239.1.1.1 ip_proto udp action pass
+	bridge vlan set vid 10 dev $swp2 mcast_router 0
+	# we need to enable querier and disable query response interval to
+	# make sure packets are flooded only to router ports
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1 \
+					      mcast_query_response_interval 0
+	bridge vlan add vid 10 dev br0 self
+	sleep 1
+	mausezahn br0 -Q 10 -c 10 -p 128 -b 01:00:5e:01:01:01 -B 239.1.1.1 \
+			-t udp "dp=1024" &>/dev/null
+	local swp1_tcstats=$(tc_rule_stats_get $swp1 10 egress)
+	if [[ $swp1_tcstats != 10 ]]; then
+		check_err 1 "Wrong number of vlan 10 multicast packets flooded"
+	fi
+	local swp2_tcstats=$(tc_rule_stats_get $swp2 10 egress)
+	check_err $swp2_tcstats "Vlan 10 multicast packets flooded to non-router port"
+	log_test "Flood unknown vlan multicast packets to router port only"
+
+	tc filter del dev $swp2 egress pref 10
+	tc filter del dev $swp1 egress pref 10
+	bridge vlan del vid 10 dev br0 self
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 1000
+	bridge vlan set vid 10 dev $swp2 mcast_router 1
+	bridge vlan set vid 10 dev $swp1 mcast_router 1
+}
+
+vlmc_filtering_test()
+{
+	RET=0
+	ip link set dev br0 type bridge vlan_filtering 0
+	ip -j -d link show dev br0 | \
+	jq -e "select(.[0].linkinfo.info_data.mcast_vlan_snooping == 1)" &>/dev/null
+	check_fail $? "Vlan filtering is disabled but multicast vlan snooping is still enabled"
+	log_test "Disable multicast vlan snooping when vlan filtering is disabled"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS