Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 873 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/fib_offload_lib.sh b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
new file mode 100644
index 000000000..1b3b46292
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
@@ -0,0 +1,873 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Various helpers and tests to verify FIB offload.
+
+__fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+	local ret
+
+	ip -n $ns -j -p -$family route show $route \
+		| jq -e '.[]["flags"] | contains(["trap"])' &> /dev/null
+	ret=$?
+	if [[ $should_fail == "true" ]]; then
+		if [[ $ret -ne 0 ]]; then
+			return 0
+		else
+			return 1
+		fi
+	fi
+
+	return $ret
+}
+
+fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	busywait 5000 __fib_trap_check $ns $family "$route" $should_fail
+}
+
+fib4_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 4 "$route" $should_fail
+}
+
+fib6_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 6 "$route" $should_fail
+}
+
+fib_ipv4_identical_routes_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 192.0.2.0/24 dev dummy2 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 tos 0 metric 1024" true
+	check_err $? "Appended route in hardware when should not"
+
+	ip -n $ns route prepend 192.0.2.0/24 dev dummy3 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy3 tos 0 metric 1024" false
+	check_err $? "Prepended route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Route was not replaced in hardware by prepended one"
+
+	log_test "IPv4 identical routes"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_tos_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 8 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 8 metric 1024" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Lowest TOS route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 4 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 4 metric 1024" true
+	check_err $? "Middle TOS route in hardware when should not"
+
+	log_test "IPv4 routes with TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1022
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1023
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv4 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replace_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1025
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_delete_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Insert multiple routes with the same prefix and length and varying
+	# metrics. Make sure that throughout delete operations the lowest
+	# metric route is the one in hardware.
+	for metric in $(seq 1024 1026); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1026
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Sole route not in hardware when should"
+
+	log_test "IPv4 route delete"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_plen_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Add two routes with the same key and different prefix length and
+	# make sure both are in hardware. It can be verified that both are
+	# sharing the same leaf by checking the /proc/net/fib_trie
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes with different prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_metric_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 routes replay - metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_tos_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 4
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 4" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0" true
+	check_err $? "Lowest TOS route in hardware when should not"
+
+	log_test "IPv4 routes replay - TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_plen_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes replay - prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_flush_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Exercise the routes flushing code paths by inserting various
+	# prefix routes on a netdev and then deleting it.
+	for metric in $(seq 1 20); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	ip -n $ns link del dev dummy1
+
+	log_test "IPv4 routes flushing"
+}
+
+fib_ipv6_add_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after appending route"
+
+	log_test "IPv6 single route add"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1022
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1023
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv6_append_single_test()
+{
+	local ns=$1; shift
+
+	# When an IPv6 multipath route is added without the 'nexthop' keyword,
+	# different code paths are taken compared to when the keyword is used.
+	# This test tries to verify the former.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append single route without 'nexthop' keyword"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_single_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1025
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1025
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 single route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1022 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1023 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 multipath routes with metric"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append multipath route with 'nexthop' keyword"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_multipath_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route replace 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 multipath route replace"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_to_single_test()
+{
+	local ns=$1; shift
+
+	# Test that when the first route in the leaf is not a multipath route
+	# and we try to append a multipath route with the same metric to it, it
+	# is not notified.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after append"
+
+	log_test "IPv6 append multipath route to non-multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_single_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where only a single route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a single route when it is the only route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	log_test "IPv6 delete sole single route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete single route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	# Test deletion of a single nexthop from a multipath route.
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting a single nexthop"
+
+	log_test "IPv6 delete single nexthop"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_multipath_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where an entire multipath route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a multipath route when it is the only route in the
+	# FIB node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	log_test "IPv6 delete sole multipath route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete multipath route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_single_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - single route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_multipath_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}