Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 283 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
new file mode 100755
index 000000000..ef628b16f
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+sec=$(date +%s)
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns="ns1-$rndh"
+ksft_skip=4
+test_cnt=1
+timeout_poll=100
+timeout_test=$((timeout_poll * 2 + 1))
+ret=0
+
+flush_pids()
+{
+	# mptcp_connect in join mode will sleep a bit before completing,
+	# give it some time
+	sleep 1.1
+
+	ip netns pids "${ns}" | xargs --no-run-if-empty kill -SIGUSR1 &>/dev/null
+
+	for _ in $(seq 10); do
+		[ -z "$(ip netns pids "${ns}")" ] && break
+		sleep 0.1
+	done
+}
+
+cleanup()
+{
+	ip netns pids "${ns}" | xargs --no-run-if-empty kill -SIGKILL &>/dev/null
+
+	ip netns del $ns
+}
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+ss -h | grep -q MPTCP
+if [ $? -ne 0 ];then
+	echo "SKIP: ss tool does not support MPTCP"
+	exit $ksft_skip
+fi
+
+get_msk_inuse()
+{
+	ip netns exec $ns cat /proc/net/protocols | awk '$1~/^MPTCP$/{print $3}'
+}
+
+__chk_nr()
+{
+	local command="$1"
+	local expected=$2
+	local msg nr
+
+	shift 2
+	msg=$*
+	nr=$(eval $command)
+
+	printf "%-50s" "$msg"
+	if [ $nr != $expected ]; then
+		echo "[ fail ] expected $expected found $nr"
+		ret=$test_cnt
+	else
+		echo "[  ok  ]"
+	fi
+	test_cnt=$((test_cnt+1))
+}
+
+__chk_msk_nr()
+{
+	local condition=$1
+	shift 1
+
+	__chk_nr "ss -inmHMN $ns | $condition" $*
+}
+
+chk_msk_nr()
+{
+	__chk_msk_nr "grep -c token:" $*
+}
+
+wait_msk_nr()
+{
+	local condition="grep -c token:"
+	local expected=$1
+	local timeout=20
+	local msg nr
+	local max=0
+	local i=0
+
+	shift 1
+	msg=$*
+
+	while [ $i -lt $timeout ]; do
+		nr=$(ss -inmHMN $ns | $condition)
+		[ $nr == $expected ] && break;
+		[ $nr -gt $max ] && max=$nr
+		i=$((i + 1))
+		sleep 1
+	done
+
+	printf "%-50s" "$msg"
+	if [ $i -ge $timeout ]; then
+		echo "[ fail ] timeout while expecting $expected max $max last $nr"
+		ret=$test_cnt
+	elif [ $nr != $expected ]; then
+		echo "[ fail ] expected $expected found $nr"
+		ret=$test_cnt
+	else
+		echo "[  ok  ]"
+	fi
+	test_cnt=$((test_cnt+1))
+}
+
+chk_msk_fallback_nr()
+{
+		__chk_msk_nr "grep -c fallback" $*
+}
+
+chk_msk_remote_key_nr()
+{
+		__chk_msk_nr "grep -c remote_key" $*
+}
+
+__chk_listen()
+{
+	local filter="$1"
+	local expected=$2
+
+	shift 2
+	msg=$*
+
+	nr=$(ss -N $ns -Ml "$filter" | grep -c LISTEN)
+	printf "%-50s" "$msg"
+
+	if [ $nr != $expected ]; then
+		echo "[ fail ] expected $expected found $nr"
+		ret=$test_cnt
+	else
+		echo "[  ok  ]"
+	fi
+}
+
+chk_msk_listen()
+{
+	lport=$1
+	local msg="check for listen socket"
+
+	# destination port search should always return empty list
+	__chk_listen "dport $lport" 0 "listen match for dport $lport"
+
+	# should return 'our' mptcp listen socket
+	__chk_listen "sport $lport" 1 "listen match for sport $lport"
+
+	__chk_listen "src inet:0.0.0.0:$lport" 1 "listen match for saddr and sport"
+
+	__chk_listen "" 1 "all listen sockets"
+
+	nr=$(ss -Ml $filter | wc -l)
+}
+
+chk_msk_inuse()
+{
+	local expected=$1
+	local listen_nr
+
+	shift 1
+
+	listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN)
+	expected=$((expected + listen_nr))
+
+	for _ in $(seq 10); do
+		if [ $(get_msk_inuse) -eq $expected ];then
+			break
+		fi
+		sleep 0.1
+	done
+
+	__chk_nr get_msk_inuse $expected $*
+}
+
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+	local listener_ns="${1}"
+	local port="${2}"
+
+	local port_hex i
+
+	port_hex="$(printf "%04X" "${port}")"
+	for i in $(seq 10); do
+		ip netns exec "${listener_ns}" cat /proc/net/tcp | \
+			awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+			break
+		sleep 0.1
+	done
+}
+
+wait_connected()
+{
+	local listener_ns="${1}"
+	local port="${2}"
+
+	local port_hex i
+
+	port_hex="$(printf "%04X" "${port}")"
+	for i in $(seq 10); do
+		ip netns exec ${listener_ns} grep -q " 0100007F:${port_hex} " /proc/net/tcp && break
+		sleep 0.1
+	done
+}
+
+trap cleanup EXIT
+ip netns add $ns
+ip -n $ns link set dev lo up
+
+echo "a" | \
+	timeout ${timeout_test} \
+		ip netns exec $ns \
+			./mptcp_connect -p 10000 -l -t ${timeout_poll} -w 20 \
+				0.0.0.0 >/dev/null &
+wait_local_port_listen $ns 10000
+chk_msk_nr 0 "no msk on netns creation"
+chk_msk_listen 10000
+
+echo "b" | \
+	timeout ${timeout_test} \
+		ip netns exec $ns \
+			./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} -w 20 \
+				127.0.0.1 >/dev/null &
+wait_connected $ns 10000
+chk_msk_nr 2 "after MPC handshake "
+chk_msk_remote_key_nr 2 "....chk remote_key"
+chk_msk_fallback_nr 0 "....chk no fallback"
+chk_msk_inuse 2 "....chk 2 msk in use"
+flush_pids
+
+chk_msk_inuse 0 "....chk 0 msk in use after flush"
+
+echo "a" | \
+	timeout ${timeout_test} \
+		ip netns exec $ns \
+			./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} -w 20 \
+				0.0.0.0 >/dev/null &
+wait_local_port_listen $ns 10001
+echo "b" | \
+	timeout ${timeout_test} \
+		ip netns exec $ns \
+			./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} -w 20 \
+				127.0.0.1 >/dev/null &
+wait_connected $ns 10001
+chk_msk_fallback_nr 1 "check fallback"
+chk_msk_inuse 1 "....chk 1 msk in use"
+flush_pids
+
+chk_msk_inuse 0 "....chk 0 msk in use after flush"
+
+NR_CLIENTS=100
+for I in `seq 1 $NR_CLIENTS`; do
+	echo "a" | \
+		timeout ${timeout_test} \
+			ip netns exec $ns \
+				./mptcp_connect -p $((I+10001)) -l -w 20 \
+					-t ${timeout_poll} 0.0.0.0 >/dev/null &
+done
+wait_local_port_listen $ns $((NR_CLIENTS + 10001))
+
+for I in `seq 1 $NR_CLIENTS`; do
+	echo "b" | \
+		timeout ${timeout_test} \
+			ip netns exec $ns \
+				./mptcp_connect -p $((I+10001)) -w 20 \
+					-t ${timeout_poll} 127.0.0.1 >/dev/null &
+done
+
+wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present"
+chk_msk_inuse $((NR_CLIENTS*2)) "....chk many msk in use"
+flush_pids
+
+chk_msk_inuse 0 "....chk 0 msk in use after flush"
+
+exit $ret